hi, i purchased a razr m with a problem that it wont boot all the way. gets to the droid eye and then freezes and the screen goes black. my first guess was a reset and yes nothing changed. i need files to flash it stock. can someone help me and send some instructions.
Related
Hi everybody,
It seems that the root procedure I used went wrong!
My Note was perfectly working but I miss some "root" applications, that I was used to on my SGS2...
So I used this tutorial to root my phone:
http://androidadvices.com/root-samsung-galaxy-note-n7000-tutorial/2/
Once the procedure complete, the phone was booting, boot animation, White samsung glowing on black screen and finally rebooting!
I don't know what went wrong... I try to reflash the stock firmware KJ4, without pit, and it removes the yellow triangle, but the phone is still stucked at bootscreen, and rebooting and rebooting again!
Please help me? What can I do? Is it really good for trash? Whould be my first...
Airwave said:
Hi everybody,
It seems that the root procedure I used went wrong!
My Note was perfectly working but I miss some "root" applications, that I was used to on my SGS2...
So I used this tutorial to root my phone:
http://androidadvices.com/root-samsung-galaxy-note-n7000-tutorial/2/
Once the procedure complete, the phone was booting, boot animation, White samsung glowing on black screen and finally rebooting!
I don't know what went wrong... I try to reflash the stock firmware KJ4, without pit, and it removes the yellow triangle, but the phone is still stucked at bootscreen, and rebooting and rebooting again!
Please help me? What can I do? Is it really good for trash? Whould be my first...
Click to expand...
Click to collapse
Try flashing from Odin with the pit file.
I tried that, seems not to work at first glance...
Then I return in diagnostic mode and do factory reset and wipe and finally...
IT BOOTED!
Great!
Many thanks!
Last night after a good night of working with my tablet out on the job I came home and noticed it was running a little sluggish so I rebooted it. It then proceeded to hang on the bootloader screen. I tried flashing into recovery and wiping and reinstalling but it still stays hung up on the bootloader screen. Getting into the recovery boot loader it says the secondary kerlel akb has an issue or something. Is there a way to Odin this thing back to stock? It's not totally bricked I can still get into recovery just can't get it to boot into the second kernel or whatever it means. I can get the exact terminology if someone needs it but I have been bricked worse than this before its just weird it won't fix itself after I re install a new ROM.
Sent from my A100 using Tapatalk
I am on the Skillraz V8 boot loader to be exact, and thats the first screen it gets stuck on..
I just tried flashing a stock un rooted ics zip but it still hangs on the first screen after rebooting after the install, which seemed to take ok... and it doesnt change my recovery or anything back to stock.
Hello, a friend of mine bought a moto x play black today, he buy it online, but the phone keep restarting itself after a few seconds of use and go in bootloop. We turn it off, turn it on again, it work for 20-30 sec and it restart again and go in bootloop. We made a few tries but we always get the same problem. There is a chance to fix it or we must give it back and ask for a refund?
Thanks a lot in advance
Power button stuck?
First excuse my English, I had the same problem and I had already screwed reboots, it solves the same firmware reflashed through RSD Lite and everything is going great again.
From here I got the firmware:
http://forum.xda-developers.com/moto-x-play/general/official-stock-firmwares-added-xt1562-t3195364
I've been using my tablet for 2 years. Yesterday, my tablet froze for the 3rd time. When I reboot it, it always stuck on logo screen. I used to solve this by pressing the volume buttons randomly. Unfortunately, by doing it for like 3 times, it doesn't work anymore, so I decided to do the hard reset. When I did the wipedata/factoryreset, it seems that it failed to do the wiping process because I was stuck with the boot loop but it loops the wiping process. After that, it stops to a green android that has a big red triangle inside of it. Believe me, I tried understanding the forums regarding to this, but it doesn't quite fit to my situation. I didn't tweak or change any firmware and application. It just had boot loops. Now, it's fully shutdown. I hope I can recover my tablet.
I hope the answers/guide can be somehow understandable to noobs like me.
Thank you for reading.
Lenova Ideatab A3000
Hello...
Same problem with my tab :crying:.. I have been using the tab for 3 years. Now It's stuck on the logo and when I tried rebooting it didn't work. Later when it's switched on, it's showing some countries symbol in the Chinese language. It is also no use because after selecting the country it says "Timeout, Failed". The tab is not detected after connect to PC. .. Somebody please help me with this.
hiddenathena said:
I've been using my tablet for 2 years. Yesterday, my tablet froze for the 3rd time. When I reboot it, it always stuck on logo screen. I used to solve this by pressing the volume buttons randomly. Unfortunately, by doing it for like 3 times, it doesn't work anymore, so I decided to do the hard reset. When I did the wipedata/factoryreset, it seems that it failed to do the wiping process because I was stuck with the boot loop but it loops the wiping process. After that, it stops to a green android that has a big red triangle inside of it. Believe me, I tried understanding the forums regarding to this, but it doesn't quite fit to my situation. I didn't tweak or change any firmware and application. It just had boot loops. Now, it's fully shutdown. I hope I can recover my tablet.
I hope the answers/guide can be somehow understandable to noobs like me.
Thank you for reading.
Click to expand...
Click to collapse
Flash your phone.
You can go to this thread if you want to flash an Original Jellybean Rom. All the tools you will need and a tutorial.
http://forum.xda-developers.com/len...000-h-call-t2441135/post45510235#post45510235
If you want to upgrade to a Kitkat Custom Rom, there is this thread. Also with all the tools and a tutorial.
http://forum.xda-developers.com/lenovo-a3000/orig-development/rom-lenovo-a3000-h-aosp-4-4-2-t3414278
Hi,
I picked up a second hand XT1622 super cheap the other day. It didn't seem to want to boot at first, and stuck around on the blue Motorola logo for a while, but eventually after leaving it alone for an hour or so it sprang into action.
Trouble was I then made the mistake of downloading the December OTA update, and since rebooting from that installation it's been stuck on the blue screen again.
I thought maybe something went wrong with the OTA, and flashed the December firmware through Fastboot hoping that would resurrect it, but I'm still getting the same result.
The bootloader is locked unfortunately, and I can't boot into recovery mode either - same issue.
Does anybody have suggestions other than me breaking the phone in half (which is probably going to happen today anyway)?
Phone suddenly sprang to life, but for some reason wouldn’t let me press return after entering my PIN after prompting for it in setup - maybe it’s a hardware issue and the phone’s on its way to the great G4 graveyard in the sky?
The original G destroys this nonsense of a phone.
For and download the stock firmware, and then flash it through fastboot. After that, see if it boots. If it does, unlock the bootloader so you will have b easier time if this happens again.