Stuck on AT&T Logo - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

Hello all!
I am trying to get my s4 back to working conditions. Earlier last night i went within SuperSu and did the full unroot then I restarted the device. When i restarted the device i was stuck on the AT&T logo. I tried to go into recovery but somehow twrp was deleted. I have been having issues flashing twrp back onto the device. Does anyone know a way to help me unbrick my phone?
:fingers-crossed::fingers-crossed:
Note device is using 5.0.1...cant remember if its stock or custom. But im pretty sure its just a stock rooted phone.

You can't flash TWRP when the phone is running a stock 5.01 bootloader.
https://forum.xda-developers.com/showpost.php?p=76657965&postcount=3

Related

[Q] Att S4 Flashing Issue

I was able to downgrade the phone to NB1 and root it with Towelroot, and used Safestrap in order to get recovery on the device.
After that, I booted into recovery and installed the GPE 5.0.1 ROM.: http://galaxys4root.com/t-mobile-galaxy-s4-roms/gpe-android-5-0-1-lollipop-rom-for-galaxy-s4/
Now the phone will not go past the S4 splash page, reboots and then goes into the stock recovery. Ive tried factory reset, clearing cache and removing the battery.
Any help is appreciated. I bought this phone for my fiance and am wanting to give it to her soon as a present.
Thank you so much in advance.
I think the problem is that you downgraded.
GDReaper said:
I think the problem is that you downgraded.
Click to expand...
Click to collapse
I couldnt install towelroot on the 4.4.4 version it came with since it said device wasnt supported.
I was following these instructions: http://www.droidviews.com/root-att-galaxy-s4-sgh-i337-android-4-4-4-kitkat-firmware-i337ucufnj4/
It states to downgrade, then root, then go back to the 4.4.4. I thought after the steps I took, I could go straight to a custom ROM.
Thanks
I used CF-Auto-Root to root my device. Since towelroot didn't work for me either.
Maybe the rom did not flash right. Try flashing again.
problem in installing lollipop rom india to samsung i9500
I have installed the newly released lollipop rom to my samsung i9500 through odin. it was successfully flashed but the phone cant restart, it stuck with samsung written on the screen and blue light on...what i should do???

[Q] Reflashed Stock w/ Odin, Still No Boot

Hello all,
I am looking for some advice, on getting my AT&T Samsung Galaxy S4 working again. I will keep this as short as I can:
I originally had 4.3 rooted with the MK2 firmware, and used Odin to flash my phone to 4.4 NB1, using the ROM in the Guide to Stock/Updating/Rooting thread.
This worked fine, and I was able to boot and use the phone, but my root access was gone.
I tried Towelroot, Kingo, etc... to no success.
I then followed http://forum.xda-developers.com/showthread.php?t=2692825 thread to semi downgrade to MK2 and was able to obtain root again. I also installed Safestrap recovery.
At this point I could not successfully boot back into the phone, though I could access Safestrap.
I flashed the stock kernel for NB1 again, but still could not boot.
I then flashed the stock NB1 ROM again.
After this, the phone would show the android icon and a progress bar, then restart, reach the Samsung load screen, start the AT&T load screen and then boot loop.
Once I reached this point, I could no longer access recovery, only download mode.
In my attempts since then. I've found if I stop the phone from ever getting to the Samsung load screen after flashing the stock ROM, I can then access recovery. As soon as I let it boot, I cannot access recovery.
I've flashed the stock ROM multiple times at this point, gotten into recovery and wiped the devices then rebooted multiple times.
I just don't know what else I can do.
Does anyone have any ideas? A place to look? Any help appreciated!

SGS 900i wont boot after flashing - I'm stuck

I've been trying to *fix* my phone for the past 10 hours and not having much luck. I have tried to flash stock 6.0 ROMs using the TWRP and it fails (not sure why).
I flashed a 6.0 ROM, which didn't include the bootloader and modem and the phone was stuck at the SAMSUNG logo.
I then flashed a stock 6.0 ROM using ODIN from this link: http://www.sammobile.com/firmwares/download/87542/G900IDVU1CPG2_G900IXSA1CPG2_XSA/
After waiting about 15 minutes, the phone went beyond the SAMSUNG logo and displayed that the apps were initialising. It then went back to the SAMSUNG logo.
I used odin to flash the bootloader and modem found from another thread: http://forum.xda-developers.com/galaxy-s5/general/s5-g900i-marshmallow-bootloader-modem-t3382754
I've since flashed TWRP again, done a wipe / factory reset and then flashed the ROM again from sammobile (which includes the recovery) so I then immediately flashed the TWRP again.
What am I doing wrong here? Why wont the phone go past the SAMSUNG logo?
Before leaving the office I done the flashing again and halfway home in the car the phone booted fine as normal.
No ideas what happened before. I effing hate this phone.

Deleted operating system and safestrap. VZW_QA1_STOCK_ROOTED_DEODEXED.zip

I figured it out. I'm currently back to running VZW_BPB1_ODEX_DEODEX_V9.
Not sure what I did. I successfully unlocked the bootloader. At that point it was running VZW_BPB1_ODEX_DEODEX_V9. Then I went and flashed VZW_QA1_STOCK_ROOTED_DEODEXED.zip. It flashed fine. During boot up it just hung at the red verizon screen. So after 2 attmepts I tried going back to VZW_BPB1_ODEX_DEODEX_V9. I flashed it, and then in odin I flashed G900V_Firmware_PB1.tar. It now wont go past the first samsung screen and It seems to have lost safestrap. When going into recovery it gives me the stock recovery. What file can I flash in Odin to get me back up and running? Thanks

Note 3 SM-N9005, Can't Boot to recovery.

My N9005 is unable to boot into recovery, whenever i try it will start to boot and then just restart itself.
When trying to reboot normally the cyanogenmod loading screen is very laggy and it just reboots after a while.
occasionally it will start normally (1/20 tries).
I tried to reflash twrp with odin but it makes no difference.
Cyanogenmod version 12.1-20161016-NIGHTLY-hlte.
Any help is highly appreciated.
Flash stock rom via Odin to get a working phone.
Or restore your Nandroid.
Reflashed stock rom and phone was working perfectly. stock recovery was also working.
Then rooted with CF-autoroot and it went well.
Then i tried to install TWRP custom recovery and it still won't let me boot to recovery.
Android version is 5.0 if that matters?
Edit: Managed to make it work with another version
Did you find a solution? I have thee same issue
Thanks
HELP with n9005 custom recovery
HI i have the same problem with n9005 i have rooted but whenever i flash twrp or cwm i end up with no recovery..phone shows set warranty but recovery msg then reboot to system...any help?
CWM no longer used .
You are probably flashing the wrong TWRP .
No i have verified the info and I have the correct twrp but still can't get it to run
same here
good evening everyone,
I come back to this forum because I have this beautiful phone that I can not update the android version 9.
On the recovery I can not go beyond the version 2.8.7.0, if I try to put a more recent version it remains in bootloop even if I restart manually.
To know that I have the HTLE model, the only thing is that I replaced the screen with a Chinese model.
then I put the original version back via odin and it goes back to version 5.
I am completely desapointed, I do not know what to do to put it under android 8+ !!!!
PLEASE HELP

Categories

Resources