I bricked my phone what to do now?!! ((((
http://www.google.co.uk/url?sa=t&rc...p43dDQ&usg=AFQjCNHCNRbuqVFXltW99vQc1_pfPlNr4Q
check this out if it doesnt work go to darkyrom
endrit9 said:
I bricked my phone what to do now?!! ((((
Click to expand...
Click to collapse
Please give us more information. What rom were you running, which kernel enz. What were you doing when the brick occured and what does it still do? Its hard to help someone when you don't know what the exact problem is
Press an hold Volume down+Home+Power at the same time. If you see a yellow triangle - your phone is not bricked. Then simply flash stock firmware with ODIN and that's all.
thanks guys i fixed it...
So I have a Samsung Galaxy Gran Prime Duos G530BT and I was installing the TWRP recovery mode on it, the app asked for restart the phone to test the recovery mode, but when I restarted it the phone didn't boot anymore. He just vibrate and nothing appers on the screen.
I can't even get acess to the recovery mode to fix it. Can someone help me?
(I try to use the flash tool since he doesn't boot, but the stock room don't have any scatterd file...)
something similar happend to me..
rxxern said:
So I have a Samsung Gran Prime Duos GM-530BT and I was installing the TWRP recovery mode on it, the app asked for restart the phone to test the recovery mode, but when I restarted it the phone didn't boot anymore. He just vibrate and nothing appers on the screen.
I can't even get acess to the recovery mode to fix it. Can someone help me?
(I try to use the flash tool since he doesn't boot, but the stock room don't have any scatterd file...)
Click to expand...
Click to collapse
same as yours but mine has logo displayed and i cant turn on or put in recovery mode can you please message me if you find a way to fix it?
HyperVenoms said:
same as yours but mine has logo displayed and i cant turn on or put in recovery mode can you please message me if you find a way to fix it?
Click to expand...
Click to collapse
Yeah, sure!
This might be stupid, but did you try use Odin? Since your logo appears, I think you're in a better condicion then me, lol.
No but i found a solution
rxxern said:
Yeah, sure!
This might be stupid, but did you try use Odin? Since your logo appears, I think you're in a better condicion then me, lol.
Click to expand...
Click to collapse
ok so i couldnt put it into recovery mode or anything it was stuck so i took out the battery then held volume down power and home then pressed down to restart device and it came on successfully i hope this also works for you
rxxern said:
So I have a Samsung Gran Prime Duos GM-530BT and I was installing the TWRP recovery mode on it, the app asked for restart the phone to test the recovery mode, but when I restarted it the phone didn't boot anymore. He just vibrate and nothing appers on the screen.
I can't even get acess to the recovery mode to fix it. Can someone help me?
(I try to use the flash tool since he doesn't boot, but the stock room don't have any scatterd file...)
Click to expand...
Click to collapse
Try to download its stockrom boot it into download mode not recovery since recovery doesnt work any more i think its volume - if not + ,power button and Home button then dow load ODIN and flash the it so as to guarentee it to boot up again.
link for the devices stock rom
#https://docs.google.com/uc?id=0B7pEcClQW-2JenF1cW9jb05OVlk&export=download
thanks enjoy!!
No that lucky
HyperVenoms said:
ok so i couldnt put it into recovery mode or anything it was stuck so i took out the battery then held volume down power and home then pressed down to restart device and it came on successfully i hope this also works for you
Click to expand...
Click to collapse
So lucky! I can't do that to mine, when I put the battery out and try to do this, my phone has no response. ):
out of options
marwachacha said:
Try to download its stockrom boot it into download mode not recovery since recovery doesnt work any more i think its volume - if not + ,power button and Home button then dow load ODIN and flash the it so as to guarentee it to boot up again.
link for the devices stock rom
thanks enjoy!!
Click to expand...
Click to collapse
Thanks for the tip, but I really think I hard brick my phone, he just vibrate when the battery is on, when I try to turn him on just with the charger I get no response, my computer cannot ever reconize him. An since it's a national model there isn't much support for it on the internet (now I do regret getting him). I opened him to try force the reconization, but I don't find the force preloader mode test point and there is no way I can get a JTAG on Brazil.
TWRP Recovery Mode f*** me really hard this time.
Now if someone could help me finding the colo/kolo/whatever point on my phone I would really appreciated.
rxxern said:
Thanks for the tip, but I really think I hard brick my phone, he just vibrate when the battery is on, when I try to turn him on just with the charger I get no response, my computer cannot ever reconize him. An since it's a national model there isn't much support for it on the internet (now I do regret getting him). I opened him to try force the reconization, but I don't find the force preloader mode test point and there is no way I can get a JTAG on Brazil.
TWRP Recovery Mode f*** me really hard this time.
Now if someone could help me finding the colo/kolo/whatever point on my phone I would really appreciated.
Click to expand...
Click to collapse
Am not much sure if ti is hard bricked since you sayed that it vibrates lets look how much characteristics of a bricked device of which it posseses so as to conmfirm that it is hard bricked.
Soft Brick - Struck inBoot loop
2. Super Brick - Stuck atflashing Factoryfs.IMG in ODIN . Also called as EMMC Bug
3. Hard Brick -Dead / Costly Paper weights
4. Dead Brick - No chargingbattery sign also - Mostly = Hard Brick; But there is a window of possibilityby a USB JIG for SamsungPhones.
5. OTA Brick - Encountereddue to updating OTA on a rooted Stock ROM
6. CM12 Brick - when CM12encountered a /data write error. Worst is ODIN Flashing Fails
7. Pixel Salad: This is a problemof the graphics unit or the screen which fails to display correctly the imageand put instead random colored pixels on some areas of the screen or the wholescreen. It’s hard to even let the other members know what you are facing sinceyour screenshots would be just clean as it would have been. This also requiresa need for hardware checking if reflashing ROM doesn't work.
Soft brick means a temporary problem, which could be fixed. Soft brick usuallyoccurs after installing custom rom(s) or incorrect installation procedure whichinstallation/manipulation of files like permission settings, erasing systemfiles that is not compatible with each phone.
SOFT BRICKED
PHYSICAL CHARACTERISTICS TO MENTION FEW ARE
Phone struck on OEM logo.
Phone struck on a ROM logo "bootanimation"
The phone does not simply power up
or any other you can add up
HARD BRICKED
PHYSICAL CHARACTERISTICS TO MENTION FEW ARE
· No signs that can turn on directly
· The Charging won't work.
· Phone not detected when connected to a PC
· The LED's do not light up immediately
· No Sound / Vibrate
· Your phone completely off (Paper Weight)
Simply put it cannot be repaired using SEUS, FLASHTOOL, ODIN or even PC COMPANION.
marwachacha said:
Am not much sure if ti is hard bricked since you sayed that it vibrates lets look how much characteristics of a bricked device of which it posseses so as to conmfirm that it is hard bricked.
Soft Brick - Struck inBoot loop
2. Super Brick - Stuck atflashing Factoryfs.IMG in ODIN . Also called as EMMC Bug
3. Hard Brick -Dead / Costly Paper weights
4. Dead Brick - No chargingbattery sign also - Mostly = Hard Brick; But there is a window of possibilityby a USB JIG for SamsungPhones.
5. OTA Brick - Encountereddue to updating OTA on a rooted Stock ROM
6. CM12 Brick - when CM12encountered a /data write error. Worst is ODIN Flashing Fails
7. Pixel Salad: This is a problemof the graphics unit or the screen which fails to display correctly the imageand put instead random colored pixels on some areas of the screen or the wholescreen. It’s hard to even let the other members know what you are facing sinceyour screenshots would be just clean as it would have been. This also requiresa need for hardware checking if reflashing ROM doesn't work.
Soft brick means a temporary problem, which could be fixed. Soft brick usuallyoccurs after installing custom rom(s) or incorrect installation procedure whichinstallation/manipulation of files like permission settings, erasing systemfiles that is not compatible with each phone.
SOFT BRICKED
PHYSICAL CHARACTERISTICS TO MENTION FEW ARE
Phone struck on OEM logo.
Phone struck on a ROM logo "bootanimation"
The phone does not simply power up
or any other you can add up
HARD BRICKED
PHYSICAL CHARACTERISTICS TO MENTION FEW ARE
· No signs that can turn on directly
· The Charging won't work.
· Phone not detected when connected to a PC
· The LED's do not light up immediately
· No Sound / Vibrate
· Your phone completely off (Paper Weight)
Simply put it cannot be repaired using SEUS, FLASHTOOL, ODIN or even PC COMPANION.
Click to expand...
Click to collapse
Even if it's not hard bricked I had no idea on how bring him into life again, since the only signal of life he gives me is the vibration with the battery on.
It could make my computer detect him it would be much easier.
hmmm
rxxern said:
Even if it's not hard bricked I had no idea on how bring him into life again, since the only signal of life he gives me is the vibration with the battery on.
It could make my computer detect him it would be much easier.
Click to expand...
Click to collapse
this may sound dumb but maybe your screen is broke i highly doubt it because of what happened but if you can feel the vibrations but not see the screen then maybe its the screen. There will probably be a way to fix it but im unsure. Its funny how you call your phone him
HyperVenoms said:
this may sound dumb but maybe your screen is broke i highly doubt it because of what happened but if you can feel the vibrations but not see the screen then maybe its the screen. There will probably be a way to fix it but im unsure. Its funny how you call your phone him
Click to expand...
Click to collapse
I didn't mention this but the screen also blinks when is vibrating so... And if It was the screen the computer should reconized the phone, shouldn't?
Haha, english it's not my native language, so I get confuse sometimes, and i don't know calling it him sounds more right for me (?????).
rxxern said:
Even if it's not hard bricked I had no idea on how bring him into life again, since the only signal of life he gives me is the vibration with the battery on.
It could make my computer detect him it would be much easier.
Click to expand...
Click to collapse
rxxern said:
I didn't mention this but the screen also blinks when is vibrating so... And if It was the screen the computer should reconized the phone, shouldn't?
Haha, english it's not my native language, so I get confuse sometimes, and i don't know calling it him sounds more right for me (?????).
Click to expand...
Click to collapse
haha ok, i habe no idea what to do wiith your phone try searching other threads maybe ???
rxxern said:
I didn't mention this but the screen also blinks when is vibrating so... And if It was the screen the computer should reconized the phone, shouldn't?
Haha, english it's not my native language, so I get confuse sometimes, and i don't know calling it him sounds more right for me (?????).
Click to expand...
Click to collapse
also in advance try to change the usb cable which you are using to connect (him) with your computer as well as try different Pc's may Be yours might have some usb port drivers corrupted also try to install the ADB interface drivers in your pc so as you can enhance your Pc detect the devices even if they are powered off gues it will work still i have hope with your (him) buddy!!!
Nothing better than xda.
I am having the same problem with my G530BT. Managed to solve ?
rxxern said:
So I have a Samsung Galaxy Gran Prime Duos G530BT and I was installing the TWRP recovery mode on it, the app asked for restart the phone to test the recovery mode, but when I restarted it the phone didn't boot anymore. He just vibrate and nothing appers on the screen.
I can't even get acess to the recovery mode to fix it. Can someone help me?
(I try to use the flash tool since he doesn't boot, but the stock room don't have any scatterd file...)
Click to expand...
Click to collapse
I am having the same problem with my G530BT. Managed to solve ?
Raphaelfla said:
I am having the same problem with my G530BT. Managed to solve ?
Click to expand...
Click to collapse
Ow, one year latter I don't think this will help you anymore, but just in case someone has the same question: I didn't solve the problem, I took it to the Samsung assistence and discover that the motherboard was damaged, they would have to replace it.
Continuous bootloop, even after re-inserting battery, the phone auto-bootloop itself. Tried going in both recovery and download mode, still bootloop. Help please. (Galaxy Grand 2 G7102)
Anubhav001 said:
Continuous bootloop, even after re-inserting battery, the phone auto-bootloop itself. Tried going in both recovery and download mode, still bootloop. Help please. (Galaxy Grand 2 G7102)
Click to expand...
Click to collapse
Try many times to press the (much) power button
maybe she's stuck
[email protected] said:
Try many times to press the (much) power button
maybe she's stuck
Click to expand...
Click to collapse
Thanks it was solved by inserting battery very little much in the panel, i know stupid solution but it worked for me , ?
me too have the problem
not solved yet
and i have lost my stock backup too..
pls help. i am in a trouble
I have tried to do custom ROM by twrp recovery mode.
But it still not working on my device g7102
My phone rebooting automatically not even going to recovery mode and download mode(it just enters into mode and reboots again) before some days it was working well no problem i was on rr rom 6.0 and twrp installed please help ....as i insert the battery it starts bootloop
Device -G7102
Thats an serious issue...i think its the problem of your power button maybe it's broken or something...have it repaired cuz RR 6.0 is an perfect rom nd it cant give bootloop
mani_photoworkz said:
Thats an serious issue...i think its the problem of your power button maybe it's broken or something...have it repaired cuz RR 6.0 is an perfect rom nd it cant give bootloop
Click to expand...
Click to collapse
My power button is also working well no problem in it
mani_photoworkz said:
Thats an serious issue...i think its the problem of your power button maybe it's broken or something...have it repaired cuz RR 6.0 is an perfect rom nd it cant give bootloop
Click to expand...
Click to collapse
Maybe something happend to powerbutton inside due to pressure .
mani_photoworkz said:
Thats an serious issue...i think its the problem of your power button maybe it's broken or something...have it repaired cuz RR 6.0 is an perfect rom nd it cant give bootloop
Click to expand...
Click to collapse
Bro any solution with i can solv this issue?
Its the only solution to fix your power button...cuz its not a problem of ROM !
IT CANT GIVE YOU BOOTLOOP ☺
Fix the power button
Hello,
I have a big problem with my zuk z1.
When i try to start it, he bootloop
When i try to go in twrp i don't have the tactile (so i can't do anything)
When i try to open it by pressing volume up, it doesn't work (so i can't flash with QPST): The phone open itself normally and qpst doesn't recognise it
Can someone help me ?
felixg8 said:
Hello,
I have a big problem with my zuk z1.
When i try to start it, he bootloop
When i try to go in twrp i don't have the tactile (so i can't do anything)
When i try to open it by pressing volume up, it doesn't work (so i can't flash with QPST): The phone open itself normally and qpst doesn't recognise it
Can someone help me ?
Click to expand...
Click to collapse
Any physical, water or moisture damage?
strongst said:
Any physical, water or moisture damage?
Click to expand...
Click to collapse
I don't know, i think moisture damage because i woke up and it wasn't working.
I did nothing wrong with it recently, he didn't fall
Maybe that's temperature :/
felixg8 said:
Hello,
I have a big problem with my zuk z1.
When i try to start it, he bootloop
When i try to go in twrp i don't have the tactile (so i can't do anything)
When i try to open it by pressing volume up, it doesn't work (so i can't flash with QPST): The phone open itself normally and qpst doesn't recognise it
Just make sure u hold volume upas fast as possible when ur device turns off
Can someone help me ?
Click to expand...
Click to collapse
Yesterday I faced same problem then I just keep it rebooting and in all of those attempt one attempt became successful and my device is detected in qfil and now I am facing a cyanogen preview watermark problem