I had a spider cracked glass on my phone so I order the replacement. Had it for a bit but couldn't seem to find the time to fix it. Dropped it another time or two, the the digitizer went. Broke the ribbon cable to power/volume buttons. My beloved Nexus is officially dead. So I find myself holding a brand new replacment glass, a otterbox defender case, and I know i have a few screen protectors in a box somewhere. Couldn't find another Nexus 6, had no phone, couldn't/wouldn't spend the bucks on a pixel2, so I bought a moto z2 play. unlocked and not much bloat, so I am happy for a time. Sub $400 dollar phone, but ok features for a mid-range device. Had an motorola Atrix way back when, and it had a finger print reader on it. Missed it since then, glad this phone has it. So, good by to nexus folks. Mod Edit: no selling/trading on XDA - use www.swappa.com
peace out folks
Wait... they made an actual, real deal Otterbox Defender for the shamu? Or are you talking about some random rugged case for it? Got pictures?
Darkshado said:
Wait... they made an actual, real deal Otterbox Defender for the shamu? Or are you talking about some random rugged case for it? Got pictures?
Click to expand...
Click to collapse
no otterbox but im fairly certain it is in reference to this case https://www.amazon.com/SUPCASE-Full-body-Protective-Protector-Resistant/dp/B00OHFGMGU
I actually found that case for $5 at the thrift store, unused. The timing was excellent as my old case had just failed. Ironically, the failed case was one of the dual-material Unicorn Beetle cases from Supcase. The TPU separated from the hard plastic at the seams. Anyway, the case mentioned in the previous post was both a pain to put on and remove, and made the N6 even larger. Add approximately a half inch total to each of the three dimensions: length, width, and height, and be thankful Supcase included a belt holster, because you're going to need it.
Strephon Alkhalikoi said:
I actually found that case for $5 at the thrift store, unused. The timing was excellent as my old case had just failed. Ironically, the failed case was one of the dual-material Unicorn Beetle cases from Supcase. The TPU separated from the hard plastic at the seams. Anyway, the case mentioned in the previous post was both a pain to put on and remove, and made the N6 even larger. Add approximately a half inch total to each of the three dimensions: length, width, and height, and be thankful Supcase included a belt holster, because you're going to need it.
Click to expand...
Click to collapse
ya i had it too it was a major piece of crap, ironically the 95 cent ones from china or wherever someone posted a year or so ago work great :fingers-crossed:
I went with an Incipio DualPro as a replacement and that worked well. So well in fact that the second thing I did with my Pixel 2 XL after purchase from Google was to head to the nearest Verizon store and pick up the DualPro for the P2XL.
My roommate uses the N6 now, but she didn't like the fact my DualPro case was in black. She got one in pink *rolls eyes*
Related
I'm in the market for a new case since the $3 one I bought on Ebay is starting to peel finish. I'm looking for the thinnest, slickest case out there.
What case are you using?
Do you like it?
How much was it?
Where did you buy it?
Pictures?
THX!
well i would like to know this as well.
However i can enlighten you on how horrible the body glove case from sprint is. it looked great and was loving the feel until after a week, pulled it out of my pocket to find the case was broke where the volume rocker is. needless to say it looked and felt good but all in all i do NOT recommend it to anyone.
nfaust01 said:
well i would like to know this as well.
However i can enlighten you on how horrible the body glove case from sprint is. it looked great and was loving the feel until after a week, pulled it out of my pocket to find the case was broke where the volume rocker is. needless to say it looked and felt good but all in all i do NOT recommend it to anyone.
Click to expand...
Click to collapse
Mine did exactly the same thing, lasted about two weeks.
Funny, I ordered one of the $3.00 ones off of Ebay to replace it.
Actually I got mine on Amazon... forgot. This is the case I bought and while it is pretty thin and fits well, the paint job is totally shotty and now looks horrible:
http://www.amazon.com/Premium-Rubberized-Snap-Seamless-Design/dp/B003TMIFEY/ref=pd_sxp_grid_pt_2_2
I bought the white and chrome case from Sprint when I got the phone. I have had my phone since the release day for the EVO and the case still looks brand new. I really like the leather feel, and the chrome accents add to the overall beauty of the phone. I would recommend the case to anyone!
A guy I work with bought this one on Ebay about 2 weeks ago and says he's still happy with it:
http://cgi.ebay.com/New-Black-Hard-Cover-Case-HTC-Evo-4G-/220646982429?pt=PDA_Accessories
Im using a seidio innocase active .
Love it.
Amazon com 24.99...i had promo code...thanx wife
http://www.amazon.com/gp/aw/d.html/ref=aw_d_iv_wireless?is=l&a=B003PJ6QV0
Sent from my PC36100 using XDA App
Case-Mate Tough Case. Purchased from the Case Mate website it just became available. Been using this case on my iPhone 4G and I love it, best case out there for protection.
anothertmobilemda said:
Im using a seidio innocase active .
Love it.
Amazon com 24.99...i had promo code...thanx wife
http://www.amazon.com/gp/aw/d.html/ref=aw_d_iv_wireless?is=l&a=B003PJ6QV0
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
That Seido case looks bulky no? I'm looking for something that doesn't add to the already large footprint of this thing in my pocket.
How about the Otterbox cases.. anyone have experience with them on other devices (not out yet for the evo)
http://www.otterbox.com/htc-cases/htc-evo-4g-cases/
My buddy has a well-worn one on his iPhone that has been through hell and still looks good.
bkfitz said:
How about the Otterbox cases.. anyone have experience with them on other devices (not out yet for the evo)
http://www.otterbox.com/htc-cases/htc-evo-4g-cases/
Click to expand...
Click to collapse
i have the body glove universal holder from radio shack which works for me. however, i am looking at getting the Seidio Innocase holster case combo... which is a steal on amazon as the case itself is $30 at sprint and the combo is $30 on amazon.
http://www.amazon.com/Seidio-Innoca..._1_4?ie=UTF8&s=wireless&qid=1282702286&sr=8-4
i already tried the case and its nice and fits inside the body glove holder too, snuggley like pigs in a blanket at ihop.
Shouldn't this be in the Accessories forum?
(Black TPU case FTW.)
Yep... should be in accessories thread... my bad.
Are the otterbox cases thin though... I'm really looking for the thinnest case out there.
I always just wait for some YouTube reviews to pop up, shows me are how big the case is in real life. (Or as real as I care to get.)
bkfitz said:
Yep... should be in accessories thread... my bad.
Are the otterbox cases thin though... I'm really looking for the thinnest case out there.
Click to expand...
Click to collapse
Looking at the impact series case it doesn't look to be too bad. I really like the looks of the bottom two cases, so I signed up to be notified when they come out. I had the Sprint Body Glove case, had since release actually, but the volume rocker area just cracked last week. Lasted longer then most I suppose.
I've got the Seidio Innocase holder IceCreaMan linked to and it has been nice. It's got a nice texture, doesn't slide easily, isn't bulky, has a belt clip, and with the case on, it makes it so the camera doesn't stick out. It doesn't cover anything either so you still have your speakers, cameras, microphones, plugs, etc. Would definitely recommend it.
the Innocase II is a proven design in my opinion
its thin, and can take a drop (ive dropped mine from 8ft + onto concrete without any cracks in the case/damage to the phone)
I got a couple cheap cases from ebay; they're the clamshell design that has a front & back the snap together. They all felt too big and bulky though, so I got a Talon to replace 'em. Love it. Just snaps onto the back of the phone and protects the corners from drops and the camera from scratches when laying the phone on it's back. I have an InvisibleShield on the front to protect the touch screen from scratches.
The talon is almost like not having a case at all -- doesn't add much bulk to the phone.
And it's only 10 bucks.
Got my case today, I was a little worried because two days after I purchased it Ebay pulled all of the sellers listings and sent me a notice saying I could file a claim to get my money back. Since the seller had good feedback, and he had notified me that it had been shipped (from China), I decided to wait and see if it would show up, which it did.
I really like it, much better fit and quality than the Sprint body glove I had on my phone before. Time will tell if it lasts, but I have to say for $3.00, I am pretty impressed. It has a soft feel that gives a more secure feeling grip than the body glove, plus it is slightly thinner, but still protects the camera lens. Plus it is red, love the color.
Wish I could give a link to the one I got, the seller has put some of his cases back up, but no Evo cases yet.
Here is a link to a red rubberized hard case that looks very similar to the one I got.
So today I was getting out of my car on the way to class and i dropped my Droid X in the street!! Needless to say theres more than a few scratches and dings on it . I was very mad at myslef. I wish there was a way to fix these scratches and dents.
Anyways, my question is what is the best case for the droid X that will cover these scratches but add minimal to no extra bulk?
Thanks
Really, it's all going to be on you. I personally, like the Otterbox cases, however, you should probably look at the Verizon store, see if there's anything there you like, and then get on Amazon and see if you can find the same case (probably @ half price ).
I went with the Incipio case. I put a review in the accessories section, which reminds me i should get the pics up. But like stated above its all personal preference when it comes to cases.
Sent from my DROIDX using XDA App
michaelearth said:
So today I was getting out of my car on the way to class and i dropped my Droid X in the street!! Needless to say theres more than a few scratches and dings on it . I was very mad at myslef. I wish there was a way to fix these scratches and dents.
Anyways, my question is what is the best case for the droid X that will cover these scratches but add minimal to no extra bulk?
Thanks
Click to expand...
Click to collapse
get an epik case from ebay. only cases i use on my devices. I have one now for my thunderbolt.
I use the a no-name thin profile rubberized case available on Amazon here. It's only 3 bucks (with free shipping). It has a nice grippy feeling to it without being too grippy where it sticks in your pocket. It also adds very little bulk to the phone.
Dude, you had no case or screen protector? Lesson learned? Ebay has a ton of cases that would have protected your phone. I use the Verizon TPU semi rigig silicone case with Zagg invisible sheild on the screen. It's really protected.
Otterbox is VERY good, it completely encompasses the phone & also comes with a screen protector.
michaelearth said:
So today I was getting out of my car on the way to class and i dropped my Droid X in the street!! Needless to say theres more than a few scratches and dings on it . I was very mad at myslef. I wish there was a way to fix these scratches and dents.
Anyways, my question is what is the best case for the droid X that will cover these scratches but add minimal to no extra bulk?
Thanks
Click to expand...
Click to collapse
If you want the maximum protection, look at the Trident Kraken case for your DX. Check the price at Amazon, as they're usually lower. If you want intermediate range protection, check out Otterbox or Body Glove cases. They also are sold by Amazon.
-Mike
Thanks for all of the advice guys! I just wish i had a time machine so i could avoid this whole fiasco!
I had a carbon fiber case on my dx when I dropped on a glacier but it hit some rocks on the screen side so it took some dings (last summer). Moral of this story is the best way to protect your phone isn't always a case or screen protector, sometimes its being extra careful.
Sent from my Xoom the way it should be, rooted and with SD card.
So I was surfing on ebay for a rugged case for my n4
I ran by this...
http://www.ebay.com/itm/Triple-Armo...t=US_Cell_Phone_PDA_Cases&hash=item5d43674502
It seems like a ballistic sg knock off but at a lower price
comes with screen protectors too if that matters for anyone...
Does ANYONE have any experience with this case? If so, please let us know!
Otherwise I'm going to order a Ballistic SG this week.....
mc704 said:
So I was surfing on ebay for a rugged case for my n4
I ran by this...
http://www.ebay.com/itm/Triple-Armo...t=US_Cell_Phone_PDA_Cases&hash=item5d43674502
It seems like a ballistic sg knock off but at a lower price
comes with screen protectors too if that matters for anyone...
Does ANYONE have any experience with this case? If so, please let us know!
Otherwise I'm going to order a Ballistic SG this week.....
Click to expand...
Click to collapse
I would order that ebay one instead of the SG.
I had the SG and it wasn't worth the money. The problem with it is that the silicone isn't a perfect fit so the nexus 4 slides up and down a bit. The plastic piece that goes over the inner silicone cover occasionally comes undone a bit (it's hard to describe exactly) which leads to more sliding of the nexus. The plastic piece doesn't stay on as well as I'd hoped because the silicon is too soft to let it really clamp on well.
That ebay one is much cheaper and appears to be basically the same.
The case I have now and would really recommend is the mybatt. In addition to a back plastic clamp on piece, it also has a front screen side snap on piece so its inner silicon layer is sandwiched securely. I haven't had any sliding issues like I did with the Ballistic. Here's a review someone did on the mybatt: http://forum.xda-developers.com/showthread.php?t=2120148
It does come in a couple different colors. I have the all black one because I thought the white might get stained with dirt.
lazer155 said:
I would order that ebay one instead of the SG.
I had the SG and it wasn't worth the money. The problem with it is that the silicone isn't a perfect fit so the nexus 4 slides up and down a bit. The plastic piece that goes over the inner silicone cover occasionally comes undone a bit (it's hard to describe exactly) which leads to more sliding of the nexus. The plastic piece doesn't stay on as well as I'd hoped because the silicon is too soft to let it really clamp on well.
That ebay one is much cheaper and appears to be basically the same.
The case I have now and would really recommend is the mybatt. In addition to a back plastic clamp on piece, it also has a front screen side snap on piece so its inner silicon layer is sandwiched securely. I haven't had any sliding issues like I did with the Ballistic. Here's a review someone did on the mybatt: http://forum.xda-developers.com/showthread.php?t=2120148
It does come in a couple different colors. I have the all black one because I thought the white might get stained with dirt.
Click to expand...
Click to collapse
Thanks for your opinion!
I went ahead and bought it on Amazon through a third party for almost $6! (CHEAP price IMO) Ebay had it for 9 bucks :victory:
I read some reviews of it. It seems like people had a mix problem with the sensor cut out. Do you have any problems of your own or any cons you want to bring up?
mc704 said:
Thanks for your opinion!
I went ahead and bought it on Amazon through a third party for almost $6! (CHEAP price IMO) Ebay had it for 9 bucks :victory:
I read some reviews of it. It seems like people had a mix problem with the sensor cut out. Do you have any problems of your own or any cons you want to bring up?
Click to expand...
Click to collapse
I personally didn't have that problem. It seems to have mainly been on the first few versions of it that came out. People didn't mention that issue as much after it had been out for awhile. I just got mine about a month and it's been fine.
lazer155 said:
I personally didn't have that problem. It seems to have mainly been on the first few versions of it that came out. People didn't mention that issue as much after it had been out for awhile. I just got mine about a month and it's been fine.
Click to expand...
Click to collapse
just to follow up with this post...
My case doesn't have this problem either so if anyone is interested in getting the Mybat Tuff Case & doesn't mind the bulk. I highly recommend it!:good:
My ballistic case fits perfectly without problem but hey that one is cheaper
Sent from my Nexus 4 using xda app-developers app
I have the Ballistic case and it fits good. Mine doesnt slide around in the rubber part and Ive never had the plastic cover fall off.
I do wish Gumdrop made a N4 case though.
And ditching the pocket protector thing. I had it wrapped in protector before I could use it. just took it off now, got a raw moto x feels nice.I take care of phones regardless of my work field and my recreational habits. If you're on the fence about it just go naked. This phones ergonomics are way too good plus its got rubber back yeaa:thumbup:
I can't do it. I have a DE and I would hate to ruin that logo. That said: I don't see what's stopping me from just putting tape over it and rolling through asphalt.
True. what's a DE?
The bezel on this phone is ultra prone to scratches. Look at it u dear light with good vision and I'm sure you will find fine marks all over the bezel. The back as well is very easily marred. I'm on moto x no 4 and while I like the overall quality, it may be hard to truly break, but it's not hard to mar/scratch.
Sent from my XT1053 using XDA Premium 4 mobile app
Anthony445 said:
True. what's a DE?
Click to expand...
Click to collapse
Developer Edition. As for me, I have a bumper case and a MIME screen protector for now. I didn't want a lot of bulk and to show off my Moto X's bamboo back.
Ye I getcha I love this phone e so much I'll just get another one next year if it runs down. scratches are normal whatever, even a occasional nic or scrape. only thing I have been noticing is that the sides of it get fine hairline cracks in it. I know I'm not alone there is a thread going on about it. Dingy care for that but just don't want the back to fall off:thumbdown:
Sent from my XT1056 using Tapatalk
Anthony445 said:
And ditching the pocket protector thing. I had it wrapped in protector before I could use it. just took it off now, got a raw moto x feels nice.I take care of phones regardless of my work field and my recreational habits. If you're on the fence about it just go naked. This phones ergonomics are way too good plus its got rubber back yeaa:thumbup:
Click to expand...
Click to collapse
I agree with caseless for asthetics BUT....... gotta protect the phone. I usually own a case and just use it when I feel like I need to be careful.
I will get a real wood back and tempered glass screen protector, that'll be as close to going bare as I'm willing too. I'm very picky about scratches.
sent via my Le Motonovo X
I have never really seen the point of a case. Sure I want to protect my phone and sure I want it to look nice, but I am going to replace it in 12-18 months anyway. Its not a long term investment or anything...and as for resale, if I lose $30 at the time of resale because of the condition, I can know that I did not spend a penny on a case and enjoyed my phone while I had it.
People are casing phones up like they are an expensive watch or something...its a replaceable item. IMO.
Jayrod1980 said:
The bezel on this phone is ultra prone to scratches. Look at it u dear light with good vision and I'm sure you will find fine marks all over the bezel. The back as well is very easily marred. I'm on moto x no 4 and while I like the overall quality, it may be hard to truly break, but it's not hard to mar/scratch.
Click to expand...
Click to collapse
I have to second this. As much as I love my Moto X, it has picked up several nicks around the edge from slight bumps that never should have left a dent. I'm truly surprised the bezel is so soft and scratch-prone compared to other phones I've owned.
The Moto X is truly awesome without a case. Probably the only phone out there that was actually designed to be nice to hold.
And of course, a week after I stopped using a case, I dropped the phone and now have a big gouge in the bezel. The front bezel is soft as butter FYI.
Hey $30 bucks is $30 bucks
I've found that having used cases and screen savers on my phones i do get a better price for my devices. So the $30 bucks i spend on a case and screen saver pays for itself each time.
my phone spends a lot of time in a backpack pocket along with keys, change that have reeked havoc on previous phone screens. I also like the anonymity of having a case and screen saver on it. My phone never gets a 2nd look...
been going without a case since I got the phone 3.5 months ago. seems to hold up pretty well except for the front bezel. I am really careful about keeping the phone in a pocket thats clean (sand-less) and I have never dropped it. Still the plastic part of the front bezel is really soft and has several scratches in it even after being so careful.
I ha e a nic in the bezel as well dropped it onto tile from the vanity. As well as a little scrape from the asphalt when I was skating with it in my hand.
Sent from my XT1056 using Tapatalk
JustROLLIN said:
I have never really seen the point of a case. Sure I want to protect my phone and sure I want it to look nice, but I am going to replace it in 12-18 months anyway. Its not a long term investment or anything...and as for resale, if I lose $30 at the time of resale because of the condition, I can know that I did not spend a penny on a case and enjoyed my phone while I had it.
People are casing phones up like they are an expensive watch or something...its a replaceable item. IMO.
Click to expand...
Click to collapse
I get what you mean and I would like to agree except my nexus 4 took a nasty drop 2 days after i got it and the screen cracked and broke the digitizer, cost me $140 to repair. With a TPU case the chances of that happening are significantly lessened, after that I always use a case( even though I LOVE the moto x without the case) Maybe if you're very careful you'll be fine.
But whether the added bulk is worth the protection or the naked feeling is worth the risk is up to you.
Until phones have steel frame and sapphire glass, I will continue to use some form of protection. If not case then screen protector. I am not risking cracking my screen.
sent via my Le Motonovo X
john.r.m said:
I've found that having used cases and screen savers on my phones i do get a better price for my devices. So the $30 bucks i spend on a case and screen saver pays for itself each time.
my phone spends a lot of time in a backpack pocket along with keys, change that have reeked havoc on previous phone screens. I also like the anonymity of having a case and screen saver on it. My phone never gets a 2nd look...
Click to expand...
Click to collapse
Depends on how much the resale value increases based on condition. If it's just that difference of $30, then I'd rather go without a case and enjoy the feel of the device since you'd come out with the same net gain.
I used to be OCD and try to keep my devices in mint condition, but I realized the cost and stress of that wasn't really worth the extra resale value. Plus, a mint phone is actually sometimes harder to sell, since many people are ok with spending a little less and getting one in good used condition. The phones I've sold with misc scratches and dents that were listed under the average going rate have always sold faster than mint ones I was asking top dollar for.
This thread made me do a thorough check of my phone and not a single scratch on it anywhere. I have gone naked since the day I got it in September.
Bare back.
All wood, no rubber.
Get your mind out of the gutter. I am saying my preference is a walnut back and no rubber case for the Moto X
aptalca said:
Bare back.
All wood, no rubber.
Get your mind out of the gutter. I am saying my preference is a walnut back and no rubber case for the Moto X
Click to expand...
Click to collapse
Wood back wtf?
Sent from my XT1056 using Tapatalk
Received my Boost Mobile Sharp Aquos Crystal on October 16, 2014 and after a few hours of tinkering,
started shopping for the usual case / holster with belt clip and clear screen protectors. Here are what
I ordered on eBay for my new smartphone . I will promptly post reviews of each upon receipt:
Case / Holster $5.99 <Received 10/20/2014. stitching quality is decent but case is so tight, can hardly get phone in/out & zero padding inside case. Seller admitted size error, refunded.
Next, I ordered this case for $5.99 < This seller DID NOT send me the case as pictures in their eBay listing. They sent me a case that is too small for this phone AND has cutouts that would allow the corners of the phone to be damaged if dropped. Package label says case is for a Samsung phone, not this Sharp phone. I contacted seller, no response in past 24 hours. Ordered from a 2nd ebay seller with same results. My search for a GOOD case/holster continued.
NOVEMBER 6, 2014 UPDATE: Finally found a case/holster that IS THE CORRECT SIZE AND protects the ENTIRE Sharp Aquos Crystal: $7.95 case / holster.
Screen Protectors (pack of 6) for $1.99 < Received in 4 days & perfect fit for this phone. Note: Pull back Tab #2 slightly BEFORE applying to phone or you might not be able to remove it after you iron out the bubbles.
Both prices including free delivery in USA.
Glenn
P.S. I look forward to working with other XDA members in rooting & creating custom ROMs for this shiny new marvel.
My prior & current flat screen toys include: Original AT&T iPhone, Acer Iconia A500 Tablet, Asus Tf700T Tablet, Google Nexus 1, Google Nexus 7 Tablet, Galaxy Tab 8.9, Tab 2 10.1, Verizon Motorola Startec, Motorla V60, Motorola T720c, Motorola MPX220, Nobis NB7022 S Tablet, Sprint Galaxy S2 Epic 4G Touch, T-Mobile Pocket PC 2003, T-Mobile Galaxy S4, T-Mobile Galaxy Note 3
Screen Protector
Zagg makes one for the Crystal, but sadly it's only the Original version...
http://www.zagg.com/invisibleshield/sharp-aquos-crystal-cases-screen-protectors-covers-skins-shields
This phone wants you to rock it naked. I've been wanting to port a stock nexus 4 rom for this phone but I want to keep some of Sharps features.
Thx for the recommendation on the screen protector. Just ordered one for $2.49
Sent from my 306SH using XDA Free mobile app
Skinomi
Another option if you like the nakedness of the Crystal is TechSkin from Skinomi. I just got mine yesterday and its very eye-catching. Its an adhesive phone skin and screen protector(I got the black carbon fiber). When shopping for it, I was a little apprehensive that it would look cheesy, but its way better than I hoped for. The way its cut comes right up to the chrome and makes it stand out. Its textured too, so its not just some cheap sticker. The good thing about it is you can still use a case. I didn't use the screen protector though; I don't know, my phone just want to show all its glassy glory. I got mine on Amazon for around $12. They also have woods and brushed metals.
cmomoney said:
Another option if you like the nakedness of the Crystal is TechSkin from Skinomi. I just got mine yesterday and its very eye-catching. Its an adhesive phone skin and screen protector(I got the black carbon fiber). When shopping for it, I was a little apprehensive that it would look cheesy, but its way better than I hoped for. The way its cut comes right up to the chrome and makes it stand out. Its textured too, so its not just some cheap sticker. The good thing about it is you can still use a case. I didn't use the screen protector though; I don't know, my phone just want to show all its glassy glory. I got mine on Amazon for around $12. They also have woods and brushed metals.
Click to expand...
Click to collapse
Pics?
MrTriTanium said:
Pics?
Click to expand...
Click to collapse
Sure!
That actually looks terrific! I saw that and the other stick-on cases on Amazon you mentioned, but gave no second-thought since the manufacturer pictures looked chintzy and not worth it.
You know, that's what I thought too. But once I got it on, my son walked by on his way to the kitchen and was like "Wow." That's a lot coming from a 19 year old. The quality is way higher than I expected, a real high-end look and feel.
Late as this post is, anyone try the snap-on cases? I bought this one http://www.amazon.com/gp/product/B00OOGDRVK/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1 Clear-Ice brand carbon-fiber snap-on case, sort of like a bumper case on the iPhone 5S. I do like the idea of the sticker thing, but it doesn't appeal to me, personally. I want the device more sealed in.
I'm getting my phone and case on the 10th, so I'll see then. I'm just curious if there's been more exploration than these stickers, or adding a tertiary pocket for your phone.
UltimaXtreme said:
Late as this post is, anyone try the snap-on cases? I bought this one http://www.amazon.com/gp/product/B00OOGDRVK/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1 Clear-Ice brand carbon-fiber snap-on case, sort of like a bumper case on the iPhone 5S. I do like the idea of the sticker thing, but it doesn't appeal to me, personally. I want the device more sealed in.
I'm getting my phone and case on the 10th, so I'll see then. I'm just curious if there's been more exploration than these stickers, or adding a tertiary pocket for your phone.
Click to expand...
Click to collapse
Phone pops out way too easily in the snap on cases. IMO. I got a dual layer hybrid for mine and am pretty happy with it.
Sent from my 306SH using XDA Free mobile app
Code:
skryte said:
Phone pops out way too easily in the snap on cases. IMO. I got a dual layer hybrid for mine and am pretty happy with it.
Sent from my 306SH using XDA Free mobile app
Click to expand...
Click to collapse
Yeah, or they stop snapping altogether.
skryte said:
Phone pops out way too easily in the snap on cases. IMO. I got a dual layer hybrid for mine and am pretty happy with it.
Sent from my 306SH using XDA Free mobile app
Click to expand...
Click to collapse
Actually, I got my phone and the case and am impressed by it. It snaps on with some click, it holds well, and it fits the nature of a bumper case quite well. My real complain stems from it not being an actual carbon fiber cover. It's just this gloss shell with a bunch of black squares gridlocked together to imitate carbon fiber in appearance and nothing more. It's actually more slippery than the naked phone. It protects it, I'll admit. The snaps over the edges actually protrude that little bit out from the screen, giving it the most subtle protection from surfaces.
Disappointingly, I ruined the screen protector in the process. I'll probably either buy a set or look up how to clean one and apply them properly.
Delte
Screen Protector
I picked up one of the hdx Zagg screen protectors over the holidays on sale and also got one from a family member as a Christmas present.
I will sell the extra at a cheaper price than what you normally could, if anyone's interested message me for info.
So not to post the same link again, it is located on the first page in one of my posts in this thread.