[ROM][8.1][UNOFFICIAL] OmniROM [NON-TREBLE][14/07/2018] - Xiaomi Redmi 4X ROMs, Kernels, Recoveries, & Other

[ROM][8.1][UNOFFICIAL] OmniROM [NON-TREBLE][14/07/2018] - Xiaomi Redmi 4X ROMs, Kernels, Recoveries, & Other

Changelogs
Build - 20180714
Remove wfd blobs(causing random bootloop, unstable)
Added Boeffla wakelock blocker in Kernel (as requested)
Fix Audio .flac not working/not playable
Enable auto brightness by default
Set read ahead kb 256 for (int/ext) storage by default
Build - 20180713
Resync Omni source
Android 8.1.0 r40
July security patch level
Many improvement from Omni source
Enable DTS-Eagle audio hal
Rebased kernel to CAF LA.UM.6.6.r1-09000-89xx.0
Rebased Wlan prima to CAF LA.UM.6.6.r1-09000-89xx.0
Cleanup and optimized in Kernel
Update wcnss config to CAF LA.UM.6.6.r1-09000-89xx.0
Add Wifi display (cast) blobs (Kanged from mido)
Many more..

Reserved

OMG, Omni ROM! Finally! Thank you so much!

Thanks a lot bro was waiting for Omni from months , now time to taste it finally

This is by far most beautiful room for santoni. So far everything work smooth. Built in themes are just eye candy.

Dev, Does VILTE work?

Thanks

SureshRoadsterz said:
Dev, Does VILTE work?
Click to expand...
Click to collapse
Yes

So, I'm using this time for some time.
I've tested every feature build in this room and everything just work. This is amazing, and for that I consider this rom first bugless Oreo rom for santoni. I hope you are going official with it. I'm very grateful for your hard work on santoni. This will be my daily driver from now on. Cheers

Does anybody tested gcam ?

q0kHaN said:
Does anybody tested gcam ?
Click to expand...
Click to collapse
It works just fine. ?

Is this rom support substratum?

Sunil tsk said:
Is this rom support substratum?
Click to expand...
Click to collapse
yes, but buggy when change overlay state that you need to force reboot your device.
just in case, maybe some ppl don't know how to apply substratum themes on most custom Oreo roms.
here the steps.
1. Download substratum from Google Playstore.
2. Download any theme substratum on Google Playstore (Make sure its compatible with Oreo 8.1)
3. Open substratum and you will see theme that you've installed before then select and "build & enable" it.
4. Reboot your device.
5. after boot completed, open substratum again and select "manager". You will see everlay not enabled (with orange text).
6. select all overlay that you want then select "change overlay states" . your systemUI will restart.
if you facing blank screen after step 6, don't panic! you just need force reboot your device by pressing and holding power button until your device rebooted.
Don't forget to backup your important data first.

gogyly said:
So, I'm using this time for some time.
I've tested every feature build in this room and everything just work. This is amazing, and for that I consider this rom first bugless Oreo rom for santoni. I hope you are going official with it. I'm very grateful for your hard work on santoni. This will be my daily driver from now on. Cheers
Click to expand...
Click to collapse
Did you run los by swapnil soni ? I think that ROM is stable .
Which rom you prefer in compares between los and omni ?

hosseinmo said:
Did you run los by swapnil soni ? I think that ROM is stable .
Which rom you prefer in compares between los and omni ?
Click to expand...
Click to collapse
This is not the place for arguing about which rom is more stable than other.

hosseinmo said:
Did you run los by swapnil soni ? I think that ROM is stable .
Which rom you prefer in compares between los and omni ?
Click to expand...
Click to collapse
I can only say that Omni is way more customizable, smoother user experience and over all have smoother feeling in it. You can try both and decide what's better for you. As for me I'll stick with Omni course there's no better rom out there for me. And I tried them all.

Good battery life and less battery drain at idle.
Smooth ROM no bugs

Update build - 20180625
Main Changelogs:
- Resync OmniROM sources
- Back to original CAF kernel without upsteam merge.
- Added DT2W and S2W Gesture
- Added DTS Sound enhancement (backend kernel driver)
- Added USB Force Fastcharge
- Fix storage capacity info not being updated after deleting or copying file
- Update powerhint and power profile framework
- Added overlay for cpu temperature
- Enable activity indicators data by default
- Check here for detail logs https://forum.xda-developers.com/showpost.php?p=76884457&postcount=2
* Clean flash always recomended!
Downloads
https://drive.google.com/open?id=1eHQDLKcxCyXwQUS3B2baY4EJVQelfavj

rainforce279 said:
yes, but buggy when change overlay state that you need to force reboot your device.
just in case, maybe some ppl don't know how to apply substratum themes on most custom Oreo roms.
here the steps.
1. Download substratum from Google Playstore.
2. Download any theme substratum on Google Playstore (Make sure its compatible with Oreo 8.1)
3. Open substratum and you will see theme that you've installed before then select and "build & enable" it.
4. Reboot your device.
5. after boot completed, open substratum again and select "manager". You will see everlay not enabled (with orange text).
6. select all overlay that you want then select "change overlay states" . your systemUI will restart.
if you facing blank screen after step 6, don't panic! you just need force reboot your device by pressing and holding power button until your device rebooted.
Don't forget to backup your important data first.
Click to expand...
Click to collapse
Thanks for info.
Bugs in substratum is it source bug?
Can u add full oms support please.

Related

[9.0] [OFFICIAL] Resurrection Remix v7.0.2 [Platina]

Make sure you have a custom recovery installed(TWRP is the preferred recovery)
Download the latest Resurrection Remix Rom & the latest GApps package
Boot into recovery
Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution
Flash ResurrectionRemix Rom
Flash Google Apps package(Optional)
Flash Magisk Root(Optional)
First boot may take up to 10 minutes.
ROM Download
GApps
Resurrection Remix Source
Device Source
Kernel Source
Vendor Source
XDA Developers
LineageOs Team
Omni Team
And Of Course To All The Supporters, Donators And Users
If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you, Team Resurrection Remix and me quite some time.
Download the MatLog app from the Play Store.
After downloading the MatLog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into MatLog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the thread with a brief description of the error.

XDA:DevDB Information
[9.0] [OFFICIAL] Resurrection Remix v7.0.2 [Platina], ROM for the Xiaomi Mi 8 Lite
Contributors
nysadev, nysadev
Source Code: https://github.com/nysadev/local_manifests
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2019-01-22
Last Updated 2019-05-06

Changelog:
04/05/19:
Kernel changelog:
- Lyra kernel 1.2:
- Based on ALS 4.4.179, latest CAF tag
- Clean imported Xiaomi code to remove Xiaomi leftover ****
- Energy Aware Scaling, with kdrag0n's energy model
- Hardcoded schedutil values so no ramdisk modifications
- Schedutil optimisations
- Dynamic schedtune enabled
- Introduce cpu_input_boost driver and devfreq (GPU) boosting
- Disable CPU boost in favour of cpu input boosting
- Boost CPU and DDR during new frames
- Kill userspace CPU boosting
- Set minimum frequently of the little cores to 902MHz for efficiency
- Enabled and set CPU masks
- Optimize CFQ
- Allow tasks to be performed as performance critical (new API)
- Add console ramoops support (thanks to @Lunarixus)
- F2FS enabled
- Latest Qcacld-3.0 from CAF
- LZ4 kernel compression
- Removed useless sdm660 dtbs
- KCAL support
- VDSO32 enabled
- Enable jump label
- Smooth and battery friendly
Device changelog:
- Compile HWUI in performance mode
- Optimise F2FS flags
- Remove HAL1 forcing of apps

Everything running smooth so far. Lost 0% of battery over night (5hours). Thanks !
Edit: Okay Livedisplay isn't working at all. There is no nightmode as well. At least I don't find it (rr has nightmode general?)

FroZine said:
Everything running smooth so far. Lost 0% of battery over night (5hours). Thanks !
Edit: Okay Livedisplay isn't working at all. There is no nightmode as well. At least I don't find it (rr has nightmode general?)
Click to expand...
Click to collapse
Livedisplay is bugged, due to the latest change LOS did to the MSM8998 source. I've reverted it and I'll have another build out tonight.
Do you mind testing out YouTube playback and USB file transfer?

nysadev said:
Livedisplay is bugged, due to the latest change LOS did to the MSM8998 source. I've reverted it and I'll have another build out tonight.
Do you mind testing out YouTube playback and USB file transfer?
Click to expand...
Click to collapse
YouTube working fine. I tested it for 15mins. No problems. Can't test USB transfer yet

Double tap to wake is also not working. Double tab to sleep is working fine
Sometimes web browsing isn't smooth as Xiaomi EU Rom. But I will stick on RR. Thank you again. Great start !

I'm testing ROM too
For now only a few things:
- I use YouTube Vanced version and sometimes it's hung up and close
- Facebook as images cut on sides and some won't load
- Some icons on notification they are on top of each other It's notification count!!!

Update (24-01-19):
- Gone official
- Should've fixed Night Light/LiveDisplay (updated vendor blobs to LA.UM.7.4.r1-04100-8x98.0)
- Fix YouTube/Facebook fully (Import wayne init)
Download server is switched to RR's server.
If you don't see a build, please wait, it might take a second for it to process.

Didn't boot with dirty flashed. Full wipe (no data) worked here. Live display is working now ! Feels smoother than the last version (scrolling).

FroZine said:
Didn't boot with dirty flashed. Full wipe (no data) worked here. Live display is working now ! Feels smoother than the last version (scrolling).
Click to expand...
Click to collapse
Good to know, and yes, there was a few significant back end changes but we now have official OTA updates which means you should be good to dirty flash

this rom is support f2fs?

ramastah said:
this rom is support f2fs?
Click to expand...
Click to collapse
Yes

Feels like the minimum display brightness is a lot higher with newest rom.

FroZine said:
Feels like the minimum display brightness is a lot higher with newest rom.
Click to expand...
Click to collapse
Do you have adaptive brightness enabled?

nysadev said:
Do you have adaptive brightness enabled?
Click to expand...
Click to collapse
Doesn't matter if with or without. Too bright for me in the night ^^
But it's okay for me

FroZine said:
Doesn't matter if with or without. Too bright for me in the night ^^
But it's okay for me
Click to expand...
Click to collapse
Its just how AOSP is, use screen dimming under night light in RR settings

nysadev said:
Its just how AOSP is, use screen dimming under night light in RR settings
Click to expand...
Click to collapse
I already did - change. Maybe my eyes/brain wanna trick me and the brightness is the same as in miui and your previous RR.

FroZine said:
I already did - change. Maybe my eyes/brain wanna trick me and the brightness is the same as in miui and your previous RR.
Click to expand...
Click to collapse
I haven't really noticed a change

Also my impression, MIUI was much darker.
I also have the issue that Bluetooth does not send track information to my car and does not remember the last selected volume, it always starts at 50%. Both worked with miui and my old phone with a pie ROM.

helmat said:
Also my impression, MIUI was much darker.
I also have the issue that Bluetooth does not send track information to my car and does not remember the last selected volume, it always starts at 50%. Both worked with miui and my old phone with a pie ROM.
Click to expand...
Click to collapse
Have you tested on any other ROM on platina? Lineage/Dot?

[ROM][9.0][PIE][OFFICAL] ZirconiumAosp [IGNITE][RIVA][r37][14/05/19] [DISCONTINUED]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
We are focusing on Stability. We are bringing more Stable ROM for your devices and it got everything that will make you stick to it.
We look forword for precious support of all Users.
@Professional_Guider(Founder/Lead Developer)
@LordShenron(CoFounder)
@sunnyraj84348(Developer)
@Abhijeet_Vadera(Graphics Designer)
Support Us if you like our work
[SIZE=+3]Got an issue or suggestion? Reach us at[/SIZE]
Telegram: https://telegram.me/ZirconiumAospChat
Networks And Internet
- Roaming Indicator
- 4G Icon
- VoLTE icon
- Show Data Disabled Icon
Display settings customization
- Font size customization according to percentage
- Lockscreen Charging Info (Toggable)
- 21+ Accents Added
- Omni Themes
- Dark Theme Added
- Black Theme Added
- Ambient Display
Sound settings customization
- Short Cut to prevet Ring added.
- Charging Vibration (Toggable).
- Now Playing Feautre.
Security settings customization
- fingerprint Authentication Viberation (Toggable)
- Lockscreen Powermenue Visibility
- Weather Temp
ZirconiumAosp: ZirconiumAosp
ZirconiumAosp Device Sources: ZirconiumAosp Devices
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look in the OP to see if your device is built on a nightly or weekly schedule.
Q. Does this ROM support custom kernels?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP, custom ROM's modify the framework a lot, so Xposed can cause a ton of issues on custom ROM's. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. You will need to use the version arm64/arm/whatever for SDK 27.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the install instructions in the first post...
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid backup first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.
Q. How do I dirty flash builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot", then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash, and then reboot.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
The ROM should contain everything you need to enjoy Android. You don't need to install any Add-on's, simply download the latest ROM, GApps, flash it and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
- Backup your personal data (Important)
- Download the ROM and GApps and transfer them to your device.
- Boot to recovery (TWRP recommended).
- Wipe the System, Cache, Data and ART/Dalvik cache.
- Flash the ROM + Gapps Zipfile.
- Flash the root solution of your choice (optional).
- Reboot your device.
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once!
The root solution should be flashed together with every update (= ROM Update)
Currently Supported Root Solutions:
Magisk stable
Magisk versions higher than 14.0 doesn't require flash on every dirty flash depending on the device, some devices need you to flash it every time, unless your maintainer says otherwise it should be fine
ROM:
Download Here
GApps:
Unofficial OpenGApps
OpenGApps
- Pixel Experience
- Google for AOSP
- Dirty Unicorns
- LineageOS
- SuperiorOS
- Omni
- ArrowOS
- MSM-XTENDED
- AICP & POSP Team for thread template idea
- Please let us know if we forgot to mention your name in credits..
XDA:DevDB Information
ZirconiumAosp, ROM for the Xiaomi Redmi 5A
Contributors
sunnyraj84348
Source Code:
Kernel- https://github.com/sunnyraj84348/android_kernel_xiaomi_msm8917
Rom- https://github.com/Zirconium-Project
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: Nougat Only
Based On: AOSP
Version Information
Status: Stable
Beta Release Date: 2019-05-14
Created 2019-03-08
Last Updated 2019-05-14

Changelog 13/05/19
-Merged May Patch (android-9.0.0_r37)
-Fixed 4G toggle Not Working Issue
-Added Volte icon toggle
-Added Aggressive Battery
-Added Android Q Battery Icon
-Added Font Manager
-Added QS Tile Style
-Updated All Prebuilts Apps
-Added Display Cutout Feature (You Will Find Under Developer Option
-Updated Lawnchair To The Latest Version
-Added a Optional Notch Friendly VoLTE Icon
-Removed Disable Data Confirmation Dialog
-Added Display Battery Temperature Feautre
Device Changelog:
-Merged Latest Linux Kernel Upstream
-Merged LA.UM.7.6.r1-04500-89xx.0 To Device Sources
-Disabled Adaptive LMK For Better Ram Management
-Disabled Hardware Compositing For Better Performance
-Enabled DTS Eagle

can you please provide screenshots?

can we get screenshots??

Screenshots please. I will download it if you give us screen shots XD

Does ir work ?

ahked.ragab said:
Does ir work ?
Click to expand...
Click to collapse
Yeah

Update has been pushed

thanks dev its a good rom but some bugs needs to repare like ring sys

So Riva has its own tree now ? Or the kernel changes are the reason why IR is fixed ? Would does using inferno kernel from nitrogin os on other roms fix IR on other devices ?

Cam2api isn't working

yeasinudoy said:
Cam2api isn't working
Click to expand...
Click to collapse
https://drive.google.com/file/d/1-25ij9ZeRymFMbXycy_UA-VBLfi3qETs/view?usp=drivesdk
Flash this fix
!Need magisk root!

Could I do setting 'xiaomi WiFi repeater' through this ROM..bro?:good:

Hello, Riva 5A, Battery indicator is not working as it should, it shows 0% and i'm sure its 100% charged.

jasonhelene said:
Hello, Riva 5A, Battery indicator is not working as it should, it shows 0% and i'm sure its 100% charged.
Click to expand...
Click to collapse
Have you disassembled your phone?

NaAnBcEhEuL9A8K7 said:
Have you disassembled your phone?
Click to expand...
Click to collapse
Of course i didnt.

[rom] [nightly] aicp 15 q [10.0.0_r37] [treble] [08/06/2020]

XDA:DevDB Information
AICP Q-15, ROM for Lenovo Vibe P2
Contributors
DeGRuS
ROM OS Version: Android 10
ROM Kernel: Linux 3.18.x
ROM Firmware Required: TWRP
Based On: aosp
Version Information
Status: Stable
Created 2019-11-09
Last Updated 2020-06-08

Initial stable build
— Supporting both F2FS and Ex4 Data partition file system
— Supporting 2 GB Zram Swap
-- Updated power_off_alarm blobs from LA.UM.8.6.r1-01900-89xx.0
-- Updated media blobs from LA.UM.8.6.r1-01900-89xx.0
-- Updated graphics blobs from LA.UM.8.6.r1-01900-89xx.0
-- Updated wfd blobs from LA.UM.8.6.r1-01900-89xx.0
-- Update GPU to 415
Change log 14/12
* December Security Patch R16
* Fingerprint Gesture Full working
* Vendor Blob Full Updated
* WFD Full Working Sound and Picture
* Xiaomi Part (Dirac sound, Vibration intensity, Screen color option, Spectrum option)
* Sepolicy Enforcing Full Working
* One key added

SGSI ???

Nitzun said:
SGSI ???
Click to expand...
Click to collapse
Yes

Thank you dev for hard work, but rom have so many bugs!
Installation is Impossible mission!

Salem Alaikom
AICP 15 update::::: https://mega.nz/#!vJMRSILB!P-pI-lK6DdnS5XbRHMKQGqBl0AXt3ChpibBIzyMrkYQ
Change log
* December Security Patch R16
* Fingerprint Gesture Full working
* Vendor Blob Full Updated
* WFD Full Working Sound and Picture
* Xiaomi Part (Dirac sound, Vibration intensity, Screen color option, Spectrum option)
* Sepolicy Enforcing Full Working
* One key added

Very good ROM, but I am getting very weak cellular signal.

Installed it today. So far so good. Fp gestures are working, but is there any way to disable the navigation bar? In settings >aicp>navigation there are no settings, the menu is empty. I tried modifying build prop but no result. Also using an app with root permission did nothing. Any thoughts?

ryd3r89 said:
Installed it today. So far so good. Fp gestures are working, but is there any way to disable the navigation bar? In settings >aicp>navigation there are no settings, the menu is empty. I tried modifying build prop but no result. Also using an app with root permission did nothing. Any thoughts?
Click to expand...
Click to collapse
add pixelizer module mentionned on the second post

degrus said:
add pixelizer module mentionned on the second post
Click to expand...
Click to collapse
Ok, it's installed. But what should I do now? Nothing has changed

ryd3r89 said:
Ok, it's installed. But what should I do now? Nothing has changed
Click to expand...
Click to collapse
go settings/ system / gesture
and choose the first mode

Can't install
Can't install ROM, no is installed, is it gsi, how to install? Or just direct zip in twrp?

Salem alaikom
Aicp new update: https://mega.nz/#!XE9glIRI!zCsAgJ7Te9XjOKVGRY_obbyUSpFSzFqHIZ2Z7PYf5FY
The first update q rom built from sources supporting Android auto

degrus said:
Salem alaikom
Aicp new update: https://mega.nz/#!XE9glIRI!zCsAgJ7Te9XjOKVGRY_obbyUSpFSzFqHIZ2Z7PYf5FY
The first update q rom built from sources supporting Android auto
Click to expand...
Click to collapse
Please, share changelog and feature list as I have been away from Android 10 for some time. Thanks!

For device and vendor same logs as vladsor ROM the only difference is that android auto is working without any problems
For kernel I used blaze kernel to klapse for night mode and many other features like memory extension with swap 2 GB now the phone has 6 GB as memory

Is decryption needed like it was mandatory in your gsis ?

This is source built ROM not sgsi
Encrypted and not encrypted device will works fine

REVIEW
degrus said:
This is source built ROM not sgsi
Encrypted and not encrypted device will works fine
Click to expand...
Click to collapse
Dear Degrus;
downloaded the rom set it up by now working fine but 1 issue can't get off NAV GESTURES the selection on the settings section comes out with a black screen no options to manage thus I cant get the system to avoid using the nav gestures any suggestion?
The AA app will BE tested it when Ill go back home in my car in a few hours then the review for that setting will have to wait for tomorrow.
I have been complaining a lot on the VLADSOR roms about this but he didn't seem to care I also read a post of your side saying it doesn't work.
hopefully it will manage to get a healthy connection with my car, then tomorrow you will hear my voice in all the forums about this particular issue and the solution.
CHEERS

After the first boot i advice to add this magisk module :: : https://drive.google.com/file/d/1nWcdpSLN1C7i3Ywv2WtrGq38veUDOshw/view
for NAV GESTURES just add pixelizer module then the option of disabling nav bar will appear under system gesture see picture in screenshot

Screenshot

Bootleggers 4.7 [Shishufied][BETA][10.0.0_r14][2019/11/25]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bootleggers ROM is an aftermarket firmware based on AOSP with some patches and fixes from LineageOS and various other projects. The idea is to bring custom features and some of the most useful apps on your device, with the goal of Making you feel like 家.
With an almost stable source, this ROM is also packed with some custom wallpapers (avaliable on ShishuWalls), ringtones, fonts, and themes to bring to your device into a more fresh look and give you always a good experience.
Also, we got our Telegram Group to talk about the ROM, share some love, ideas or even have fun with us!
Thanks to this people, this ROM could be possible, so, i have to give a big thanks to:
Code:
* Shishu (For being there)
* Ground Zero ROMs Team
* AOSPExtended
* ABC ROMs
* NitrogenOS
* AICP
* DirtyUnicorns
* Lukas Koller (Camera Roll dev)
* fxckingdeathwish (for the amazing photos for wallpaper/headers)
* OmniROM
* CyanogenMod/LineageOS
* PixelExperience
* PureNexus
* merothh
* Resurrection Remix
* AOSiP
* CrDroid
* CypherOS
* PureKat
* theimpulson
* MatiHalperin
* Project Xtended
* Pixeldust Project
* AquariOS
* Alejandro Ponce (Quetzal/Calypso dev)
* PixysOS
* The Memedo Testers team
* Every maintainer who decided to give our project a shot
* You for your interest on our project
Also if you got some ideas,bug fixes, stability improvements or want to help to support features for your device, you can do it by sending a Pull request on Bootleggers Github (check downloads and sources part) or tell us on our Telegram group (Check about us section), will be really appreciated. Got some questions about some terms we use? Check our FAQ or feel free to ask us. We appreciate your feedback and help.
Downloads:
ROM Folder on SF
GApps:
Opengapps
TWRP
Required TWRP
Kernel
ROM Sources
Bootleggers Github 
Contributors
Fullbustah, Astridxx
ROM OS Version: 10.x Queso
ROM Kernel: Linux 3.x
Version Information
Status: Beta
Current Version: 4.7
Created 2019-11-25
Last Updated 2019-11-25

This is beta version so expect bugs rom/device specific.
Known bug: fp gestures, sepolicy permissive
You can clean flash from pie, but be sure to back up you data and not to encrypt/decrypt on Q, it will soft brick your phone.
Flash instruction:
-You should be on latest twrp, download from folder in OP
1. Download all needed files: Rom, gapps (check OP)
2. Put them to you internal/external phone storage
3. Reboot your phone to TWRP
4. Wipe /system, /data, /vendor, /cache
5. Flash Rom, Gapps, magisk (optional)
6. Reboot
If your phone is laggy, you did something wrong. Audio might stop working, just restart phone. This rom lacks features for now, more coming soon. If you want stable rom, downgrade to pie or get a new device Remember, this is still beta.

sererved

Can you provide some screenshot

Boot animation is too laggy, the phone automatically restarts. Rom doesn't boot.

What features are there? I usually see, in other ROM threads, the features that they provide.

Same here. ROM doesn't boot no matter what. Tried many times.

Rom booted and working fine for me.

Abhi8232 said:
Rom booted and working fine for me.
Click to expand...
Click to collapse
Post some screenshots please

_ajayrai said:
Boot animation is too laggy, the phone automatically restarts. Rom doesn't boot.
Click to expand...
Click to collapse
The same happened to me.
I installed this rom yesterday and the phone doesn't boot.
It's like if there was a bootloop inside the boot animation.

Abhi8232 said:
Rom booted and working fine for me.
Click to expand...
Click to collapse
Instructions please.
And from which ROM you clean flashed?

Abhi8232 said:
Rom booted and working fine for me.
Click to expand...
Click to collapse
Can you share some screenshots, here too ROM not booted tried many times..,

Earlier the uploaded file around 260 mb was currupt but the one with 25-11 tag is working fine.
As this rom does not have any features yet so I jumped back to havoc. So can't post screenshots. Sorry!
What i did was :
Twrp: 3.3.1
Wipe: cache,dalvik,system,data,vendor
Flashed gappa(nano) and then magisk.
That's it and it booted

Abhi8232 said:
Earlier the uploaded file around 260 mb was currupt but the one with 25-11 tag is working fine.
As this rom does not have any features yet so I jumped back to havoc. So can't post screenshots. Sorry!
What i did was :
Twrp: 3.3.1
Wipe: cache,dalvik,system,data,vendor
Flashed gappa(nano) and then magisk.
That's it and it booted
Click to expand...
Click to collapse
25-11 build itself lagging on boot animation then restart several times, How to solve speaker distortion problem in havoc latest build ?

yes true bro . lagging while boot animation.

Fullbustah said:
This is beta version so expect bugs rom/device specific.
Known bug: fp gestures, sepolicy permissive
You can clean flash from pie, but be sure to back up you data and not to encrypt/decrypt on Q, it will soft brick your phone.
Flash instruction:
-You should be on latest twrp, download from folder in OP
1. Download all needed files: Rom, gapps (check OP)
2. Put them to you internal/external phone storage
3. Reboot your phone to TWRP
4. Wipe /system, /data, /vendor, /cache
5. Flash Rom, Gapps, magisk (optional)
6. Reboot
If your phone is laggy, you did something wrong. Audio might stop working, just restart phone. This rom lacks features for now, more coming soon. If you want stable rom, downgrade to pie or get a new device Remember, this is still beta.
Click to expand...
Click to collapse
Keep creating, my friend:good: please don't stop

Yaah..your pie rom was awesome..so plz make e Q rom also..plz don't stop bro

Plz Q bcz ur pie rom was amazing

HACKIMTOSH said:
Plz Q bcz ur pie rom was amazing
Click to expand...
Click to collapse
Yup we need a bootleggers q rom for sure.im eager to try this rom out but the bugs reported by the testers is making me not to flash this rom yet.please make this rom as stable as possible.then I'll definitely flash this rom

Fullbustah said:
This is beta version.
Click to expand...
Click to collapse
Is it worth waiting more? It seems like bro u have stopped building the rom.Will be happy to see the rom alive again.

[ROM][A10][UNOFFICIAL]Resurrection Remix 8.6.7(21/03/20)

NOTE: THIS IS ONLY FOR A10 FIRMWARE, DO NOT FLASH ON A11 FIRMWARE UNLESS YOU WANT A HARD BRICK
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Standard Disclaimer:-
* Your warranty is... still valid?
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Description:
Resurrection Remix ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome combination of performance, customization, power and the most new features, brought directly to your device.
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to the LineageOS team, Omni team, SlimRoms and of course to all the supporters.
Features:
Recovery flashable zip
Based on HarukeyUA's trees - Device, Kernel, Vendor
Stock Vendor
SELinux Enforcing
Safetynet pass ( with Magisk )
2021 February Security Patch
2020 November Vendor Patch ( latest A10 vendor )
Screen Off FOD
Stock MIUICamera Included
No GApps
Full theming support of almost any aspect of phone
App Lock
Face Unlock
Smart Charging
Battery Health
System Info
RR Papers
Screen Recorder
FOD Customizer
And many more...
+++
All RR features
Screenshots:
Make sure you have a custom recovery installed
Download the latest Resurrection Remix ROM, Recovery installer zip, GApps package and Magisk
Boot into recovery
Perform a FULL FACTORY RESET and also wipe system and dalvik cache as a precaution
Flash ResurrectionRemix ROM
Flash Recovery installer zip
Reboot to recovery
Flash Magisk(Optional)
Flash GApps package(Optional)
Flash Fenix Kernel included with ROM(Optional)
If you face any issues; ( Sensors, WiFi, BT, FC, Lag ... )
Flash included dtbo to dtbo partition (via recovery if you recovery supports it, else via fastboot
Reboot
First boot may take up to 10 minutes.
ROM:
GDrive | Mega
Extras:
GApps
Magisk
GCam
Resurrection Remix Source
Device and Kernel Trees
Credits:
XDA Developers
LineageOS Team
AICP
CrDroid
AOSIP
DU
Xtended
Evolution X
Bliss
Omni Team
And Of Course To All The Supporters, Donators And Users
Special Thanks:
@AlaskaLinuxUser for fhis tutorials on building ROMs
@Harukey for device and kernel trees
@paul89rulez for Fenix kernel
@Parrot043 for GCam
@TheHitMan for BitGApps
@topjohnwu for Magisk
@Hemant Sachdeva @Golbinex and @paul89rulez for helping me with solving my errors during building my ROM
@Murat in the Rom Development Telegram Group for Portrait Camera Fix
PostmarketOS guys, whose wiki post finally helped me solved my kernel compilation errors
PA Team and Harukey for MIUICamera
Docker for high-pefrormance build environment setup
Github for helping in maintaining a awesome VCS code repo for hosting trees and sharing it
If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you, Team Resurrection Remix and me quite some time.
Download the MatLog app from the Play Store.
After downloading the MatLog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into MatLog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the thread with a brief description of the error.
x----------x----------x----------x-----------x----------x-----------x-----------x----------x----------x
x----------x----------x----------x-----------x----------x-----------x-----------x----------x----------x
Misc:
Build Author/Maintainer - NanduPV
Device Name - Mi A3
Device Codename - laurel_sprout
ROM Status - UNOFFICIAL
Current ROM Version - v 8.6.7
Notes:
Always use 'git clone', never download sources directly from Github website as zip, they will be broke af source of many sleepless nights
I recommend Latest BitGApps and Magisk Stable Releases
Custom Kernel for the win
If you want GCam, I recommend latest Parrot GCam
Changelogs:
21/03/20
Fix Portrait Mode
Update included Fenix Kernel from WinterisComing to ChasingSpring (Now also having TTL Module support)
No need for DTBO anymore
21/03/12 ---BETA---
Bump to RR ver. 8.6.7
Add support for Screen Off FOD
Pseudo-Fix Portrait Mode ---OBSOLETE---
Show Real time values on Lockscreen Charging
Only need MagiskHideProps to spoof Sensitive Values to pass Safteynet now
Add TTL module support in Kernel
LineageOS+ Kernel upstream changes
21/02/03
Fixed Ultrawide and 48MP
Fixed DT2W
Fixed some lockscreen paddings
Include flashable Fenix Kernel alongwith ROM
21/01/27
Switch to better FOD implementation
Fixed Screen Brightness Adjustment not working
Fixed a ton of padding issues
Added RR Papers
Added RR Overlays : System Info, Battery Health
Add smart charging and Face Unlock
21/01/21
Initial Build

Good Going
And Keep Going

Great

Neeeww

Nice rom but brightness level isn't working

nice man, great work!!
have telegram support group?

Screenshots?

New build is up with with lots of little fixes and some new features

Guysho_2112 said:
Screenshots?
Click to expand...
Click to collapse
I have added today
Wolverine786 said:
Nice rom but brightness level isn't working
Click to expand...
Click to collapse
I have fixed in new build
naymend said:
nice man, great work!!
have telegram support group?
Click to expand...
Click to collapse
Yes, but not allowed to link here

Can we flash over stock Android 11??

I have this same question.
Any guidance & response is appreciated.
Rajendran Rasa said:
Can we flash over stock Android 11??
Click to expand...
Click to collapse

Rajendran Rasa said:
Can we flash over stock Android 11??
Click to expand...
Click to collapse
XDAnewone said:
I have this same question.
Any guidance & response is appreciated.
Click to expand...
Click to collapse
No, this is only for A10 firmware, if you flash on A11, you will get hard brick, RR latest is Android Q based

NanduxXxPV said:
No, this is only for A10 firmware, if you flash on A11, you will get hard brick, RR latest is Android Q based
Click to expand...
Click to collapse
Thanks. Screenshots look beautiful. Well done.
Wish it was available on A11, may be sometime in near future.
Best wishes... And added thanks

New build is up
Changes include;
dt2w fixed, and
ultrawide and 48mp support +
some more padding fixes,
portrait mode still not fixed though,
(only on miuicam and anxcam back camera though, front cam works, on gcam both works)

I have also inculde a fully proton clang compiled fenix kerenel zip in the downloads folder, i recommend you flash this along with the ROM while installing it for better performance and battery backup. See the instructions. For some reason i couldn't build it inline with the ROM due to build errors.

Can we update the kernel with the one here: https://forum.xda-developers.com/t/kernel-fenix-9-miui-10-4-14-221-walt.4010729/ or the ROM needs some special build?

A much needed update for this release thread, I had made two new builds before, but didn't get round to updating this thread due to being busy in IRL. ( and lazy ... )
So anyone who downloaded the ROM recently, please check the updated OP and changelogs and verify which build you are on. Please update to latest ver. if you are on any past ones.
The latest build is bug-free with everything working.
If you are on the latest build, no need to flash again. Because the files in the download links were update long back on the release date of changelogs, i just didn't get around to updating this thread. Sorry for that.
And if anyone likes AOSP and still on A10, i am releasing a Corvus ROM A10 build soon.

Jhon_Locke said:
Can we update the kernel with the one here: https://forum.xda-developers.com/t/kernel-fenix-9-miui-10-4-14-221-walt.4010729/ or the ROM needs some special build?
Click to expand...
Click to collapse
This is real late but, yeah you can flash any kernel theoretically, just be sure to flash DTBO if you encounter any problems or bootloop. Fenix and Stock LineageOS+ is just the kernels i confirmed working and supported on RR.

is this ROM still under development?

Database Users

welcome