Hello,
i can't boot my Axon 7 A2017G anymore.
I tryed to flash a stock EDL ROM "A2017G_B09_NOUGAT_FULL_EDL", to rescue my phone but i doesn't help. If i boot my phone i see the ZTE logo followed by the "dead android" logo (android with red triangle), for a short moment and then black screen. I also can't boot into recovery (Vol up + Power), the ony state i can bring my phone is the EDL mode. I tryed the Axon7Tool and MiFlash (diferent ones) and the flash everytime succeede. If i flash TWRP i cant boot ony to the TWRP logo and then stuck.
If this thread is in the wrong section i'm sorry.
Thanks for help.
cybertronicx said:
Hello,
i can't boot my Axon 7 A2017G anymore.
Thanks for help.
Click to expand...
Click to collapse
Hi I have the exact same symptoms...
Only EDL,
Black screen
Android robot with a triangle for a brief moment...
My EDL flash also succeeds
Could you get your issue sorted out? any helpful threads?
Related
hello help me please
hello,
before all, thanks for helping people around the world about solving problems in their zte phones
I have a zte axon 7 A2017G it worked perfectely until i download the nougat 7.0 version i install it via twrp and my phone is stuck in the logo zte without access to neither bootloader nor recovery.
The problem is that i tried many tpoics from xda but when i try to flash a stock firmware using the qualcom tool wich recognize my phone i dont find the xml file in the stock firmware and i dont know how to do to get it functional again.
i am stuck in this point since 10 days now and i hope you will help me repair my zte axon
can someone send me a link to a tuto or to explain me the steps to install a stock firmware and the tool i should use please
Thanks a lot
Imad
You can try booting to FTM mode by powering off your device, press and hold your volume down and power button till you get in FTM mode, then your computer should detect it. From there, you could install TWRP by following the instructions on https://forum.xda-developers.com/axon-7/how-to/guide-install-twrp-unlock-bl-flash-t3517379. Once you installed TWRP, you could install the bootstack and stock system of the version you want at https://www.androidfilehost.com/?w=files&flid=112651. Been through the same thing when I tried upgrading my A2017G to nougat, and I thought I was f*cked till I remembered you could boot your device to FTM mode XD
MahathirMohamad_ said:
You can try booting to FTM mode by powering off your device, press and hold your volume down and power button till you get in FTM mode, then your computer should detect it. From there, you could install TWRP by following the instructions on https://forum.xda-developers.com/axon-7/how-to/guide-install-twrp-unlock-bl-flash-t3517379. Once you installed TWRP, you could install the bootstack and stock system of the version you want at https://www.androidfilehost.com/?w=files&flid=112651. Been through the same thing when I tried upgrading my A2017G to nougat, and I thought I was f*cked till I remembered you could boot your device to FTM mode XD
Click to expand...
Click to collapse
Thanks for youn answer. and your support.
have you been in the same situation ? is it what we call a hard brick ? The FTM is the factory test mode is it?
Thanks a lot
I have an Huawei P9 Lite bricked. I cannot power on it. It is stuck with the "Huawei Boot screen" and recovery mode doesn't work (same stuck boot screen). There's a tool like Odin that can flash firmwares from PC?
EDIT: I managed to get in the fastboot but Hisuite cannot detect my phone. What I can do now?
P9 lite
bigfabriziodue said:
I have an Huawei P9 Lite bricked. I cannot power on it. It is stuck with the "Huawei Boot screen" and recovery mode doesn't work (same stuck boot screen). There's a tool like Odin that can flash firmwares from PC?
EDIT: I managed to get in the fastboot but Hisuite cannot detect my phone. What I can do now?
Click to expand...
Click to collapse
I have the same problem!
I had a similar problem. The cause was flashing a wrong recovery. After going into fastboot and flashing the right one, all started working again.
hey, my zte axon 7 mini is stuck on zte logo , cannot access recovery mode or edl mode with key combo , i have no OS , im literally stuck in ZTE LOGO , everytime i press a key combo it just reboot and goes back to ZTE Again , i drain the battery out , and the pc recognizes it as ANDROID but cannot adb mode or edl mode through tuliptool , i really need help -- THANKS!
hey, my zte axon 7 mini is stuck on zte logo , cannot access recovery mode or edl mode with key combo , i have no OS , im literally stuck in ZTE LOGO , everytime i press a key combo it just reboot and goes back to ZTE Again , i drain the battery out , and the pc recognizes it as ANDROID but cannot adb mode or edl mode through tuliptool , i really need help -- THANKS!
Hi; just got the same issue why creating a backup. Process went into the end properly through twrp. Roboot, and then freezed into the same logo... I'm with the b16, european version... If someone has a tips, would appreciate !
Edit : Could re-enter Twrp , my mistake, appologizes
Hi,
I've bricked my ZTE stupidly. I used the axon splash boot maker to make my new splash boot image and remove the AT&T logo. (I forgot to use the k88 moded image for the app). After the reboot the screen became black and I was stuck in DFU mode. I used a EDL cable to boot in ELD mode and used the Jasmin Tool to flash back the boot and the recovery. Same thing, the screen stay black and stuble back in DFU mode.
I thinks i bricked it for good. Someone had an Idea?
Thanks in advance for your help.