Rebranded AL-00 unlock code, compass not working - Huawei P10 Lite Questions & Answers

Hi all,
I bought a Huawei nova lite (was-Al00) on Ali. This one was rebranded by the seller as a was-lx2c636.
When I try to get the unlock code trough Huawei's official website, it just says 'contact us for any question' but no code is delivered.
Can anyone help me ? Any suggestion? I tried to create a new Huawei ID through the Chinese website but I need a Chinese phone number, of course...
Other thing: FF finds a c432 firmware authorised for my mobile (was-lx1ac432b210). Can I try to install it or will it brick my phone or just won't install.
I live in Belgium. Phone is 64gb, 4gb ram, dual Sim.
And finally, I've got a problem with the compass that is not working. I tried a full reset with no help and other compass apps. Any idea ? It's one of the reasons I want the bootloader unlock code.

I suugest you ask to ali the code if not use the warranty and money back

You're not the only one, at least with the compass issue. I live in Europe and purchased Huawei P10 Lite WAS-LX1A from a reseller. Compass was not working, and instead of returning to seller I somehow mistakenly got it to warranty repair, and they apparently replaced the motherboard with 32GB model (because only this standard model is supported in Europe). Compass was working, but I returned the phone and bought a new 64GB model from another reseller. Big surprise: compass sensor not working, not showing any signs of life, as if it's not even there, same as before. Now I'm starting to suspect that this particular 64GB variation has compass sensor replaced with storage unit? But I didn't find any information on this.

Related

[HELP] firmware selection? and OTA updates

Hey,
i hope you guys can help me because im drowning with information here...
to make along story short.. i bought 2 p8 lite from germany few months ago... both was working great.
one of them fell into water and got damaged...
to fix it, i bought "new" mainboard also from germany. when i assembled it i discovered that its branded (vodafone).
it loads much slower then the other unbranded phone, and the much more disturbing issue is that almost none of the sensors are functioning (proximity, accelerometer,gyro) and second sim is disabled.
as far as i know is not a hardware malfunction, and i think that maybe it can be fixed by flashing new firmware.
the current version of the board is ALE-L21C02B130
i wanted to ask few things:
1. how can i know with version is suitable to my phone now (i want to unbrand it and to enable second sim)
2. once i flash it with other firmware will i be able to get OTA updates
thanks for helping

New A2017G hardware?

My recently bought (Feb 2017) Axon 7 has a firmware that is unusual.
The phone name: ZTE A2017_7383
Model number: ZTE A2017G
Android Version: 6.01
Android Security patch level: December 1, 2016
Baseband version
M8996FAAAANAZM-1.68528.1.71127.1
Kernel version: 3.18.20
Build number: ZTE A2017GV2.0.0B08
Note that the build number is a V2.0.0B08
This phone is incompatible with the A2017GV1.0.0B05 and A2017GV1.0.0B10, so beware. I semi-bricked my phone (no network connectivity anymore) and I can't find a replacement A2017GV2.0 software.
I contacted ZTE, but no reply yet.
The reason I upgraded was due to inability to connect to 4G or LTE networks, even though my provider is on LTE band 3 and band 7.
Can anyone help me with this problem?
I looked at the back of the phone, where the original stickers still haven't been removed. It says ZTE A2017, without the "G". Could this be a Chinese set and the supplier reflashed it with a modified B08 firmware?
Anyone has a phone with the sticker not yet removed and has a different model number? I need proof that this is not the international version.
Would a Chinese version work on a "G" version software?
laicc said:
I looked at the back of the phone, where the original stickers still haven't been removed. It says ZTE A2017, without the "G". Could this be a Chinese set and the supplier reflashed it with a modified B08 firmware?
Anyone has a phone with the sticker not yet removed and has a different model number? I need proof that this is not the international version.
Would a Chinese version work on a "G" version software?
Click to expand...
Click to collapse
The A2017 is the chinese version...you can check this link to get the latest nougat update.....100% working
https://forum.xda-developers.com/axon-7/how-to/a2017-nougat-twrp-flashable-djkuz-t3571714
laicc said:
I looked at the back of the phone, where the original stickers still haven't been removed. It says ZTE A2017, without the "G". Could this be a Chinese set and the supplier reflashed it with a modified B08 firmware?
Anyone has a phone with the sticker not yet removed and has a different model number? I need proof that this is not the international version.
Would a Chinese version work on a "G" version software?
Click to expand...
Click to collapse
as far as I know A2017 variant doesn't have capacitive keys under the screen, so you would notice it right away. My sticker does spell "Model: A2017G" though. Have you made sure that the IMEI numbers written on the sticker match with your phone actual IMEI numbers too? (to be sure it's not a sticker issue)
laicc said:
I looked at the back of the phone, where the original stickers still haven't been removed. It says ZTE A2017, without the "G". Could this be a Chinese set and the supplier reflashed it with a modified B08 firmware?
Anyone has a phone with the sticker not yet removed and has a different model number? I need proof that this is not the international version.
Would a Chinese version work on a "G" version software?
Click to expand...
Click to collapse
USA (U) & International (G) = Hardware keys.
Chinese = No Hardware keys , and uses On-screen Navigation keys.
About the V2, that's something else.... Need further findings thought.
DrakenFX said:
USA (U) & International (G) = Hardware keys.
Chinese = No Hardware keys , and uses On-screen Navigation keys.
About the V2, that's something else.... Need further findings thought.
Click to expand...
Click to collapse
About the Chinese version, the 64GB model doesn't have hardware keys, that's right, but the 128GB version does. I have one.
Thanks everyone, just to close this issue, for the benefit of everyone, my discussions with the Ebay seller revealed that the handset is actually an A2017 Chinese set, and reflashed with their custom ROM to emulate an A2017G. Thats why it didn't work very well, and practically cannot be OTA'ed or updated.
This same message has been cross posted to [A2017G] B10 Update Released 1 2 3
Thread by rikin93
So sorry if I repeat myself here, but I just wanted everyone to know that the issue is closed.
I have the same issue, So how did you manage to solve it? did you flash the Chinese version? (A2017) if so how?
or did you ask the seller for the custom ROM to flash it back to that?
thank you
dude215p said:
I have the same issue, So how did you manage to solve it? did you flash the Chinese version? (A2017) if so how?
or did you ask the seller for the custom ROM to flash it back to that?
thank you
Click to expand...
Click to collapse
I had looked at the various options available here on this XDA site, like flashing back to the stock Chinese A2017 rom, or converting it to an A2017U, but in the end, I didn't think it was worth the trouble, and could even make the problem worse.
They did mention that their supplier has the custom rom, and he could probably get it for me. But that means I will be stuck with that rom forever with no possibility of an OTA.
I eventually convinced the Ebay seller to accept the return for a full refund.
Hope this helps.
laicc said:
I had looked at the various options available here on this XDA site, like flashing back to the stock Chinese A2017 rom, or converting it to an A2017U, but in the end, I didn't think it was worth the trouble, and could even make the problem worse.
They did mention that their supplier has the custom rom, and he could probably get it for me. But that means I will be stuck with that rom forever with no possibility of an OTA.
I eventually convinced the Ebay seller to accept the return for a full refund.
Hope this helps.
Click to expand...
Click to collapse
Hey, thank you for sharing,
I decided to do the opposite, and dived into getting my phone in working condition by flashing the chinese rom on it, although I never done anything like this before. I think I'll make a noob's guide to it, because while there are a lot of good tutorials out there, there are a lot of details kind of glossed over on how to do certain small steps, and you'll have to search for other guides on how that particular step is done.
For now let's just say that I'm happily running Nougat 7.1 with the Google Now launcher, and Google stock apps.
dude215p said:
Hey, thank you for sharing,
I decided to do the opposite, and dived into getting my phone in working condition by flashing the chinese rom on it, although I never done anything like this before. I think I'll make a noob's guide to it, because while there are a lot of good tutorials out there, there are a lot of details kind of glossed over on how to do certain small steps, and you'll have to search for other guides on how that particular step is done.
For now let's just say that I'm happily running Nougat 7.1 with the Google Now launcher, and Google stock apps.
Click to expand...
Click to collapse
That's great. I would really like to know how you did it. Reading the forum, even with the fairly detailed instructions that have been posted, can be intimidating for noob's like us. Is your 4G working good now? Thanks in advance.

Hauwei P8 firmware compatibility issue

Hello Members, Hope ya all doing fine
Recently I bought A used Huawei P8 from OLX its a good phone but after couple of days I found some features missing in this device like Dual Window , Screen Lock Widget and when I entered its IMEI to huawei IMEI info check website its showing 16GB variant phone but I have 64GB variant so I am a bit confused here I am attaching a screen shot of my Phone About please take a look and tell me if I am using the correct firmware
Thanks
Maybe is this the result of a restored firmware afber a custom rom was applied?

Chinese P30 Pro

Hi All
I wonder if someone can help me.
I was given a P30 Pro as a gift while working in China, sadly its the Chinese variant.
Is there any way I can flash the global firmware onto the device overwriting the Chinese version?
I understand that doing so the NFC will not work for payments as its not certified outside China but thats no hardship.
It does have the google framework services on but none of the apps.
I have tried the update via USB and memory stick but the device reported no firmware found, (version isssue?).
Sadly the bootloader is locked too.
If anyone has any suggestions it would be appreciated.

Flash SM-M307FN software on SM-M3070

Hey Guys,
So I just bought a M30s today and after installing Samsung Smart Switch I saw there was a software update available. Whoopee.
Well after updating everything was in chinese and the phone no longer had google apps. From the sticker on the box I can see it is a SM-M3070 model - chinese market if I'm not mistaken.
So the history is:
- I bought the phone in Romania
- It had google apps and everything out of the box
- it's a SM-M3070 model
The question is:
- Can I flash SM-307FN software on it? e.g. for Germany (PDA M307FNXXU2ASL2 and CSC M307FNOXM2ASL1)?
Please help...I'm freaking out because I just bought it and now it's unusable for me.
https://forum.xda-developers.com/galaxy-m30s/help/flashing-models-sm-m3070-sm-m30f-t4031495
Maybe you should ask this guy how it ended
you can't

Categories

Resources