Related
Hi,
I'm looking at various cases for the Nexus 4, and wondering what everyone thinks of them.
I've never used a case for any of my phones before, and I've never really minded the scratches, nor have I gotten any cracked screens despite dropping my phones dozens of times. However, the Nexus 4's glass surfaces have got me thinking perhaps it's a good idea to get some protection.
I'm primarily protecting against scratches, and the occasional drop. I'd like the thinnest and most non intrusive case possible, and one with some grip so the phone doesn't fall so easily.
So far, my choices seem to be Nillkin, Rearth, Poetic and Diztronic. I'm leaning more towards hard cases than soft TPU cases due to aesthetics.
Any pros and cons for the above?
Thanks!
This is exactly what we need, there doesn't seem to be much comparision between tpu and hardcases.
How does the S-Line case compare to others say as it's only around £3 which is dirt cheap but is it crap and wouldn't protect my Nexus at all (If it actually arrived that is )
I'm definitely curious to the difference between soft and hard cases. In my experience some hardcases are damaging the phone a little...
DutchDisturbed said:
I'm definitely curious to the difference between soft and hard cases. In my experience some hardcases are damaging the phone a little...
Click to expand...
Click to collapse
UPDATED 2013-06-07
OK. Let me try since I've tried 9 cases and I'm not 100% happy with any of them. I was spoiled by the Galaxy Nexus Ringke Slim case. Super Slim, all edge protection in a drop and super grippy. Nothing I've tried for the N4 yet has given me the same satisfaction.
These are in the order that I purchased them.
1. S-Line (TPU)
Like: Cheapest of the bunch. The soft rubber gives the most grip of all the cases I have.
Don't Like: IMO it looks ghetto. Poor molding so there are sharp edges everywhere. I guess you could trim this but it already looks like a hack job. The buttons are covered and are difficult to push.
Overall: I tried this for 5 seconds and then tore it off. Garbage.
2. Rearth Ringke Slim (hard case) - MY CURRENT CASE.
Like: Slimmest of all of the case I have. Super tight fit. Looks awesome. Buttons are exposed and are fairly easy to reach. If you want slim, this is a nice case. Judging from the photos I've seen of the Diztronic slim equivalent, it also gives better corner coverage.
Don't Like: Rearth changed the material and design from the Galaxy Nexus which was my favourite case. The material isn't as grippy and offers no protection in a drop to the front/top and front/bottom. The Gnex version was way better as it totally covered the top/bottom front and was super grippy....so I'm super disappointed in the N4 version.
Overall: Even with the negatives I mentioned, I keep coming back to this case for my daily use. It's the best blend of looks, feel (big time) and protection for slim case.
3. Poetic Bumper (Bumper)
Like: Great fit. Looks way better in person compared to photos. Buttons are covered but are very easy to push (this is a big deal for me). Get to see the N4 backing. Good drop protection because all sides are covered. Easy to remove. Of all the cases, this case gives me the most confidence NOT sliding on a slanted surface.
Don't Like: Makes the phone feel wide. There's no backing so it's not as comfortable to hold compared to a case with a backing. This isn't something no one seems to talk about...it just feels odd. Makes one-hand operation tough.
Note: The back of the phone is exposed so you may want to put a rear screen protector or vinyl (i.e. DBrand). I rocked a DBrand vinyl rear cover for a while with this bumper and really liked it. Great way to customize the look of your phone and you're not constantly cleaning the N4's glass back.
UPDATE:. I've realized I don't like bumpers. The feeling of the recessed back kills it for me. This bumper/vinyl combo is excellent for protection, button feedback and looks....but the recessed back is a deal breaker for me. Just a personal preference.
4. Diztronic (TPU)
Like: Feels great in the hand. Solid. Probably my fav in terms of feeling. Great build quality. Confidence in a drop situation. Looks great.
Don't Like: Suffers from the same problem as the Rearth hard case. Material isn't grippy. Feel like it's going to slide off a slanted surface. Buttons are covered and because the rubber is stiff, it's hard to push and there's very little feedback. The lip that surrounds the screen is pretty pronounced... occasionally get's in the way of swiping. Not as bad as the Mercury though.
Overall: Although it has some negatives it the best of the TPUs I've tried.
UPDATE: After reading some other posts on the topic, I used an Exacto blade to put little slits along the edges of the molded buttons and it made a huge difference in button feedback. I really like the case now. This is my "rough activity" case.
5. Official Nexus 4 bumper (Biggest mistake purchase)
Like: Looks cool. Best button feedback (feels like the original button). Good drop protection as all sides are covered.
Dislike: Widest case on the list. The hard plastic sides make it slippery and uncomfortable. Port/mic holes are smaller than the Poetic. The back plastic edge is dimpled which a) is uncomfortable and b) makes it slippery on a surface (or more so than the Poetic). The USB port hole is deep so you need a skinny USB cable end. Oh ya, and the price is ridiculous. After shipping and taxes it was $33.
Note: Like the Poetic bumper the back of the phone is exposed so you may want to put a rear screen protector or vinyl (i.e. DBrand)
Overall: This was my biggest waste of money of all the cases. Far to expensive for what you get. Get the poetic.
6. Meifeng Hard Skin Cover Case (Hard case)
Like: Great feeling. It's a hard case but the coating on it makes it feel squishy. Grip feeling is excellent. Button and port openings are excellent...better button openings than the Ringke Slim. Although I've only had this one for 30 minutes it doesn't appear to be a fingerprint magnet like the Ringke is. Wow. I really like this case. Inexpensive too...$7.
Dislike: Like the Ringke Slim the top/bottom front edges are totally exposed so no protection on those edges. Corners are covered but not as much as the Ringke Slim.
Overall: Want a slim case that feels good that protects the sides and back, this is the case. I'll post some pics in this thread.
eBay Link
7. Rearth Hybrid
I'm a huge fan of Rearth because of my previous purchases. Unfortunately, the Ringke Hybrid is a big miss.
Likes: Very small lip on the holding on to the LCD screen which makes it easy to do edge to edge swiping. The clear plastic (when not covered in fingerprints) looks cool.
Dislikes:
1) The button feedback is almost non-existent so you can never tell if you've pushed them hard enough. You can mod by cutting the button sides but you should have to if it was designed properly.
2) The clear plastic back, although good in theory, is terrible in practice because it's a fingerprint magnet, dirt/dust/fuzz is impossible to keep out so you see it, and I imagine that the first scratch I get will ruin the look of the case.
3) The small 4 feet that keep the back off a flat surface provide no grip. The phone slides very easily. The feet also feel awkward when handling the phone.
4) On my particular model there was a small molding defect. It wasn't a big deal but not in line with Rearth's high quality products.
Rearth took a chance on a unique design so I applaud them for that. But I would not recommend this case.
http://www.rearthusa.com/google-nexus-4-hybrid-fusion-case
Overall: A lot of people like this case but, next to the S-Line, this is my least favorite. Great in theory...awful in practice.
8. Poetic Palette slim hardcase UPDATED
Like: Excellent feeling coating on the plastic. Even better than the Meifeng. It's also grippy in the hand and on flat surfaces. Not as much as the Meifeng but more then the Rinkge. The bottom and top edges of the case cover more than 50% of the top/bottom edge of the phone giving it more protection on those edges than the Ringke Slim and Meifeng.
Dislike: It doesn't have raised corners like the other two so you get very poor screen-down protection. I would never but my phone screen down with this case. Less corner protection than that Ringke Slim but more than the Meifeng. It has the smallest button openings of all the slim cases. They've put slits on each corner to make it easier to take the case off but that gives it a very lose fit. I'm not going to test it but I'm willing to bet that your phone would pop out of the case if dropped. It's also the widest of the hard cases cases I've reviewed making it less comfortable to hold than the other two,
Overall: If you take your phone out of it's case to clean often, this is your case.
9. Mercury TPU UPDATED
Like: Looks. I have the black one and the sparkle effect is really nice. As long as it's somewhat free of fingerprints, it's pretty grippy too. Great protection as the rubber is soft and covers all front edges of the screen.
Dislikes: The button cutouts are the smallest of all the cases making it uncomfortable to push a button. The cutouts for the mics/speakers are a little off. That doesn't cause a function issue but looks ghetto. It's a fingerprint magnet. The overall fit isn't that good so when you grab it from the sides you can see that the case deform slightly. The mold lines bad and noticeable to the touch. Although I don't have a scale, I feels like the heaviest of the bunch. Also the raised front edge the surrounds the screen is big making the screen look recessed and makes it tough to touch the edge of the screen.
Overall: Not recommended. If you want TPU spend the extra few bucks on the Diztronic and you'll be way happier. This is a "you get what you pay" for case.
So my personal ranking choices are:
Slim hardcase: Rearth Slim because of the feeling (almost like there's no case), superior slimness, great button cutouts, full exposed ports, and looks. Meifeng is the runner up because of the cost, great feeling due to grippy coating and big button cutouts.
TPU: Diztronic TPU because of protection, button feedback (after slits made), feel in the hand and looks. Don't bother with anything else.
Bumper: No brainer. Poetic for the button feedback, surface grip due to rubber edges and protection.
goister said:
Hi,
I'm primarily protecting against scratches, and the occasional drop. I'd like the thinnest and most non intrusive case possible, and one with some grip so the phone doesn't fall so easily.
So far, my choices seem to be Nillkin, Rearth, Poetic and Diztronic. I'm leaning more towards hard cases than soft TPU cases due to aesthetics.
Any pros and cons for the above?
Thanks!
Click to expand...
Click to collapse
I think you are going to have a hard time satisfying all your conditions. The hard cases I have seen do not provide the best protection due to the stiffness of the material. More shock is going to be transmitted to the device and less absorbed by the case. Also many of the hard cases I have seen leave a portion of the bezel open where a drop could damage it. The tpu cases are thicker but that thickness provides protection. The elastic nature of polyurethane provides some shock protection. Also the tpu is much better than the older silicone cases as far as friction being removed from a pocket (also not as bad a lint magnet). It all comes down to how much risk your phone is exposed to and how much you are willing to compromise your desires. Me, I feel this phone is relatively fragile and I err on the side of protection. If you are only concerned about scratches just get a screen and back protector.
AdamUpNorth said:
<snip>3. Poetic Bumper (Bumper) - MY CURRENT CASE.
Like: Great fit. Looks way better in person compared to photos. Buttons are covered but are very easy to push (this is a big deal for me). Get to see the N4 backing. Good drop protection because all sides are covered. Easy to remove. Of all the cases, this case gives me the most confidence NOT sliding on a slanted surface.
<snip>).
Click to expand...
Click to collapse
Glad I went with the poetic bumper case.I just couldnt get down with spending so much for the official google one. It Should be delivered today. Now if I only I had my nexus 4 already lol:silly:
i have a Rearth Ringke Slim (hard case) and i like very much
I just ordered one from diztronic. Pretty simple basic TPU.
Stanerefor said:
I just ordered one from diztronic. Pretty simple basic TPU.
Click to expand...
Click to collapse
Let us know what you think of it and whether it would survive a drop from say chest height.
On a different note, what do people think of this case, it seems like a hard case with a leather cover over the screen which double up as a stand for the screen. Thinking this would be very useful for watching or reading a pdf off the screen.
What kind of case are you guys thinking, im torn between diztronic, a bumber and the above case.
mufc09 said:
Let us know what you think of it and whether it would survive a drop from say chest height.
On a different note, what do people think of this case, it seems like a hard case with a leather cover over the screen which double up as a stand for the screen. Thinking this would be very useful for watching or reading a pdf off the screen.
What kind of case are you guys thinking, im torn between diztronic, a bumber and the above case.
Click to expand...
Click to collapse
Although I wouldn't test it, I would say the Diztronic TPU would save the phone in a chest height drop.
The cover case you linked to looks good. For me it's a no go because I look at my phone too many times a day so the cover would drive me nuts.
As promised in post 4, here are some pics of the Meifeng Hard Skin case. Love the feeling of this thing. See my 2 cents in post #4.
AdamUpNorth said:
As promised in post 4, here are some pics of the Meifeng Hard Skin case. Love the feeling of this thing. See my 2 cents in post #4.
Click to expand...
Click to collapse
Hey is that a glass screen protector you have on? Seems thick, just want to confirm. If so which one? TY
Crisisx1 said:
Hey is that a glass screen protector you have on? Seems thick, just want to confirm. If so which one? TY
Click to expand...
Click to collapse
No, it's the Rearth Ultimate Clear Plus (link)
The original one without the proximity sensor cut out...although I've never had a problem with that.
It is a little thick but the way the light is catching it makes it look much thicker than it is.
AdamUpNorth said:
No, it's the Rearth Ultimate Clear Plus (link)
The original one without the proximity sensor cut out...although I've never had a problem with that.
It is a little thick but the way the light is catching it makes it look much thicker than it is.
Click to expand...
Click to collapse
Oh gotcha... this is what I just bought: http://www.spigen.com/cell-phone/google/nexus-4/google-nexus-4-screen-protector-steinheil-dual.html
Hopefully its as good.
AdamUpNorth said:
Although I wouldn't test it, I would say the Diztronic TPU would save the phone in a chest height drop.
The cover case you linked to looks good. For me it's a no go because I look at my phone too many times a day so the cover would drive me nuts.
Click to expand...
Click to collapse
I did this a couple of days ago with my Diz TPU. I was pulling the phone out of my shirt pocket and it slipped out of my hand and landed on the concrete sidewalk face down. As i was going to pick it up I was expecting the worst but when I turned it over not a scratch. The case has a few scuff marks though, I can live with it.
joe rz said:
I did this a couple of days ago with my Diz TPU. I was pulling the phone out of my shirt pocket and it slipped out of my hand and landed on the concrete sidewalk face down. As i was going to pick it up I was expecting the worst but when I turned it over not a scratch. The case has a few scuff marks though, I can live with it.
Click to expand...
Click to collapse
Good stuff!!
Sent from my Nexus 4 using xda premium
What about a bumper + a best screens ever screen protector ?
Sent from my Nexus 4 using xda app-developers app
Here is the case I bought...
http://www.amazon.com/gp/product/B00AH86WMU/ref=oh_details_o00_s00_i00
Anyone who has bought this, feedback is appreciated
AdamUpNorth said:
UPDATED 2013-02-05 7pm EST
1. S-Line (TPU)
Like: Cheapest of the bunch. The soft rubber gives the most grip of all the cases I have.
Don't Like: IMO it looks ghetto. Poor molding so there are sharp edges everywhere. I guess you could trim this but it already looks like a hack job. The buttons are covered and are difficult to push. Tried this for 5 seconds and then tore it off.
3. Poetic Bumper (Bumper) - MY CURRENT CASE.
Like: Great fit. Looks way better in person compared to photos. Buttons are covered but are very easy to push (this is a big deal for me). Get to see the N4 backing. Good drop protection because all sides are covered. Easy to remove. Of all the cases, this case gives me the most confidence NOT sliding on a slanted surface.
Don't Like: Makes the phone feel wide. There's no backing so it's not as comfortable to hold compared to a case with a backing. This isn't something no one seems to talk about...it just feels odd. Makes one-hand operation tough.
Note: The back of the phone is exposed so you may want to put a rear screen protector or vinyl (i.e. DBrand). I have a screen protector (which is really slippery when finger grease is on it so I've ordered the carbon fiber vinyl back from DBrand..it's in the mail).
Click to expand...
Click to collapse
I have the poetic bumper and the TPU S-Line Case and agree with this review. I'm currently using the poetic bumper for the exact same reasons mentioned above. I think I'm going to order the Diztronic Matte Back Black TPU Case since it seems to offer more protection. Has anyone ever purchased accessories from HandHeldItems.com (really inexpensive but not sure if thats good or bad)? I purchased a couple of cases (hard case and soft gel case) and a few screen protectors from them and will see how they are when I receive them.
These are the two cases I ordered:
Black Rubberized Hard Case
Slim Fit Flexible Jelly Rubber Case
AW: Case suggestions
mammenj said:
Anyone who has bought this, feedback is appreciated
Click to expand...
Click to collapse
You could be the first
Currently I'm using an S5 without any cases or covers, and it's still drop-proof, dropped it multiple times on hard floor/concrete and there is no damage on the screen what so ever. And before that I had an HTC One X, which is probably more similar to the Edge in that the screen isn't protected if it drops face down, I did eventually crack it with that kind of a drop. However the edge is gonna be even more problematic because even the back is glass, and no plastic protruding edge to protect it.
Sure I could put it in a bulky case but then it kind of defeats the purpose of having one of the most premium feeling phones ever doesn't it? It'll also negate any ergonomic benefits of the curved back edge as well as the ease of edge swipe on the front edge. Might as well just get something like a.... I don't know, nobody makes high end plastic phones anymore now days, even cheap phones like One Plus is front+back curved glass. Also this thing is already a bigger phone than what I'm used to, adding a beefy case is just gonna make it that much bigger, which I do not like.
Well I guess plenty of people did survive the iPhone 4 glass sandwich era just fine, I'll just have to wish myself luck. I wonder how much would one of those adhesive skins help in a drop situation. Sure they are very thin but if think about the physics of it, gorilla glass is actually quite flexible so it doesn't break from the acceleration of the impact itself, so thinness doesn't really matter. What actually breaks these surface hardens glass is usually a microscopic failure on the surface developing into a big crack. And those microscopic failures can happen when they make contact with sharp hard stuff like individual sand particles, they effectively puncture the surface and develop a weakness. So if you have a skin on the glass, what'll hopefully happen instead is that the skin will be thick enough for the particle to not make direct contact with the glass, and prevent breaking. Even though such thin skins cannot significantly reduce the impact acceleration.
I understand your points, but please, don't ever try to use this phone naked. You NEED a case, the grip is so bad that dropping it is almost a guarantee and the back glass seems to be much more fragile than the front glass from what I have seen in videos. About the cases, you may want to look into the Samsung official plastic backs or (when available) the leather backs. The official plastic back cases from Samsung are the only ones (in my opinion) that really do not ruin the phone's design, the design remains almost intact. However, while the grip is much improved over the naked phone, it is nowhere near other bulky and rubberized cases. A rubberized plastic wrap would be a solution, but the big problem still remains - the metal sides of the phone which are very narrow.
PS: As I understand from the latest spy pics, the iPhone 7 will have a glass back again...probably needed for radio/charging/payment/other secret developments.
There are plenty of case available that won't make the phone look s**t. I'm using a Spigen Crystal Clear, a very good combination of protection and looks. It's impossible to completely keep the phone's look and feel, but it's probably as close as possible whilst being confident of being able to accidentally drop it from pocket height without damage.
Glass protectors on these curved screens are to be avoided, that's my personal opinion anyway. My brother bought numerous types of these for his S6 Edge (expensive and cheap) and not one went on properly without raising on the curves within twenty minutes, causing touch problems on the edges. Go for a good quality film type like a Zagg HD Dry.
I copied you entirely mate I'm not ashamed to say. Got my Spigen Crystal Clear yesterday and, your right, it does look good, but not as good as the nekkid phone itself. But I guess that's the price of good protection.
Just waiting for my Zagg HD Dry front and back covers to arrive today.
I'm personally using Otter Box Commuter for me and my wife's phone. I was able to try it on in store before purchasing. I was sort of desperate for a case on delivery day and it was the most protective case I found. I'm happy with it overall. It's sleep and slim and although the whole front in uncovered it does have raised top and bottom edges so if the phone falls flat the screen doesn't actually touch the floor.
Sent from my SM-G935F using Tapatalk
Use it naked.
Control your fingers.
nobnut said:
Use it naked.
Control your fingers.
Click to expand...
Click to collapse
Too risky lol
Sent from my Blackberry Bold
I would love to use the phone naked as it just looks so good, but I am scared to risk it. I have never dropped and cracked a phone, and I had an Iphone 4S without a case for 2 years which were well known for getting smashed, I have a clear case on the edge at the moment to offer it some protection.
Carrying and using smart phones without any case is just asking for trouble. I have the S7 Edge and when it arrived on March 2nd it stayed at home in the box until my Spigen Ultra Hybrid case arrived (which was a few days later). I was still using my S5 because I didn't want to take any chances.
After my case arrived I put it on but I still keep the original plastic film on the screen because I was waiting for my Skinomi screen protector to arrive. My Skinomi arrived yesterday and I installed it last night.
So if you don't want a bulky case get the Spigen Ultra Hybrid (I went with the crystal clear color). I ordered my case and screen protector from Amazon. The case is very nice looking and doesn't add any bulk to the phone.
Sk17z0 said:
but I still keep the original plastic film on
Click to expand...
Click to collapse
Oh my.
I'm using this case. It's amazing. Thin, easy to grip and not too expensive.
http://www.bodyguardz.com/unequal-shock-case-samsung-galaxy-s7-edge.html
I use the phone naked and dropped it from about 3,5 feet, first it hit the steel base of a table and than it bounced on a wooden floor, not a scratch :angel:
Juuls said:
I use the phone naked and dropped it from about 3,5 feet, first it hit the steel base of a table and than it bounced on a wooden floor, not a scratch :angel:
Click to expand...
Click to collapse
Q.E.D.
Pics now attached!
I have always preferred minimalist cases, especially on a phone this gorgeous. I've always had great luck with the Ringke and Nillkin slim/thin fit cases but, this time around, when I went to pre-order my phone, the only slim cases available were manufactured by Spigen and Elago. Now, I LOVE Elgo cases because they're almost like not having a case at all, just like a skin. They offer no real drop protection, but are primarily designed for scratch protection. Absolutely no lip on the front to protect the display. Still, they fit the bill for me and are my case of choice when at home or the office. Places where I NEVER drop my phone and, if I do, it's on very soft carpet.
Anyway, I went ahead and ordered the Spigen slim case. While it DID look awesome and provided some added protection in the form of a slight lip at the top and bottom of the display, ultimately the case failed me. My phone is perfectly unscathed. However, the Spigen design results in a ton of flex and bend when removing the case. Eventually, this lead to the case cracking along the backside. Not acceptable.
Today I received my Ringke slim case (now available on Amazon) and I must say I'm VERY happy with it. The fit is perfect, almost no bend or flex when taking the case off or putting it on, and the lip of protection for the display along the top and bottom edge is even more pronounced than the lip on the Spigen model.
5/5 stars from me. An awesome, lightweight, nearly zero bulk case that offers excellent drop and scratch protection. If this is what you're looking for, look no further than Ringke's offering. Go get it!
pieces of cake said:
Pics to follow soon.
I have always preferred minimalist cases, especially on a phone this gorgeous. I've always had great luck with the Ringke and Nillkin slim/thin fit cases but, this time around, when I went to pre-order my phone, the only slim cases available were manufactured by Spigen and Elago. Now, I LOVE Elgo cases because they're almost like not having a case at all, just like a skin. They offer no real drop protection, but are primarily designed for scratch protection. Absolutely no lip on the front to protect the display. Still, they fit the bill for me and are my case of choice when at home or the office. Places where I NEVER drop my phone and, if I do, it's on very soft carpet.
Anyway, I went ahead and ordered the Spigen slim case. While it DID look awesome and provided some added protection in the form of a slight lip at the top and bottom of the display, ultimately the case failed me. My phone is perfectly unscathed. However, the Spigen design results in a ton of flex and bend when removing the case. Eventually, this lead to the case cracking along the backside. Not acceptable.
Today I received my Ringke slim case (now available on Amazon) and I must say I'm VERY happy with it. The fit is perfect, almost no bend or flex when taking the case off or putting it on, and the lip of protection for the display along the top and bottom edge is even more pronounced than the lip on the Spigen model.
5/5 stars from me. An awesome, lightweight, nearly zero bulk case that offers excellent drop and scratch protection. If this is what you're looking for, look no further than Ringke's offering. Go get it!
Click to expand...
Click to collapse
Do you think this will work with the whitestone dome glass protector?
Sent from my SM-G965U using Tapatalk
daddymikey1975 said:
Do you think this will work with the whitestone dome glass protector?
Click to expand...
Click to collapse
Absolutely, it will. I used it together with the Whitestone on my S8+ and Note8.
I won't use Whitestone anymore though. Way overpriced and far too fragile. They also tend to lift up over time, even with a perfect installation and no drops or knocks. There are smarter options available, if you're patient.
pieces of cake said:
Absolutely, it will. I used it together with the Whitestone on my S8+ and Note8.
I won't use Whitestone anymore though. Way overpriced and far too fragile. They also tend to lift up over time, even with a perfect installation and no drops or knocks. There are smarter options available, if you're patient.
Click to expand...
Click to collapse
I had a whitestone on my S7 Edge for a year and my note 8 for the last 6 months with good results.
I'm open to other suggestions though...
Sent from my SM-G965U using Tapatalk
Pics now attached. You can see my fingers on the other side of the phone with it face down on the table, demonstrating the lift the lip provides. The display is well-protected. This is surely the slimmest case you can get for the S9+ that still offers drop protection and guards against screen damage in the event of a fall.
You can also see that the camera is well protected. I was even able to fit a large metal plate behind the case to allow it to attach to my car mount, and I've positioned it in such a place as to avoid any interference with wireless charging. Everything works properly.
I got this case and love it as well! Even thinking about getting some of the other colors available, for days when you need a little extra protection their onyx case is not bad either, still thin but not as slim
vwite said:
I got this case and love it as well! Even thinking about getting some of the other colors available, for days when you need a little extra protection their onyx case is not bad either, still thin but not as slim
Click to expand...
Click to collapse
Agreed. Top notch case.
ugly AF case, those buttons cutouts must not be on the case.
x111 said:
ugly AF case, those buttons cutouts must not be on the case.
Click to expand...
Click to collapse
Sure, the case isn't for everyone. Some people (perhaps you?) prefer a huge bulky case with all kinds of patterns colors and textures that detract from the clean lines and curves of the devices. But this is a plain black case, with almost nothing to it. What about it is "ugly," in your opinion?
Also, I don't even know what this means: "those buttons [sic] cutouts must not be on the case." The cutouts must not be on the case? What?! Can you help us understand what the heck you're saying?
pieces of cake said:
Sure, the case isn't for everyone. Some people (perhaps you?) prefer a huge bulky case with all kinds of patterns colors and textures that detract from the clean lines and curves of the devices. But this is a plain black case, with almost nothing to it. What about it is "ugly," in your opinion?
Also, I don't even know what this means: "those buttons [sic] cutouts must not be on the case." The cutouts must not be on the case? What?! Can you help us understand what the heck you're saying?
Click to expand...
Click to collapse
yeah he probably prefer one of those ugly otterbox or UAG cases that instead of cutouts have huge layers of silicone or tpu covering the buttons and making them harder to press. Those cases sell wel so yeah a lot of people like them, to each their own.
x111 said:
ugly AF case, those buttons cutouts must not be on the case.
Click to expand...
Click to collapse
What case are you using?
Care to show where you positioned the metal plate?
Sent from my SM-G965U1 using Tapatalk
yeah, uag cases are beautiful but also have some ugly cutouts where buttons are.
pieces of cake said:
Pics now attached. You can see my fingers on the other side of the phone with it face down on the table, demonstrating the lift the lip provides. The display is well-protected. This is surely the slimmest case you can get for the S9+ that still offers drop protection and guards against screen damage in the event of a fall.
You can also see that the camera is well protected. I was even able to fit a large metal plate behind the case to allow it to attach to my car mount, and I've positioned it in such a place as to avoid any interference with wireless charging. Everything works properly.
Click to expand...
Click to collapse
tips on how to move the clock to the middle of the screen like yours?
x111 said:
yeah, uag cases are beautiful but also have some ugly cutouts where buttons are.
Click to expand...
Click to collapse
UAG cases don't compliment the design of the S9/S9+ at all. They're functional, and offer great protection, but they're bulky and rugged-looking. The S9 is not bulky or rugged-looking. That's not its design.
Surprise! Button cutouts allow for direct access to the buttons. Keeping the feel and function of those buttons STOCK.
xxlikquidxx said:
tips on how to move the clock to the middle of the screen like yours?
Click to expand...
Click to collapse
Substratum/Andromeda System Mods.
Thanks for the detailed reviews and pics. Although this case isn't for me, I appreciate your review in that it helped me decide the same ??Guess I'll stick to the one that comes with the phone out of the box.
IndDoc said:
Thanks for the detailed reviews and pics. Although this case isn't for me, I appreciate your review in that it helped me decide the same ??Guess I'll stick to the one that comes with the phone out of the box.
Click to expand...
Click to collapse
Your phone came with a case?
crzycrkr said:
Care to show where you positioned the metal plate?
Click to expand...
Click to collapse
Right there.
pieces of cake said:
Right there.
Click to expand...
Click to collapse
Sorry, didn't realize the rotation was off, but you still get the idea, I'm sure.
Hey guys, I'm thinking of getting the S20 when its out and want a case ready for it, but i don't know much about the differences and what is good. Does anyone recommend something that is strong and not too bulky?
The S20 comes with a clear plastic case in the box. (At least the Australian version did.)
I'm loving my Schnail cases! I got the clear bumper version as well as the military grade one. They are crazy good!
Clear case
Military grade
Mine using Spigen Liquid Air, so far this case don't make this phone bulky but still protect phone from drop or protect screen when you flip down.
any case recommendation which make perfect fit with some protective glass where no case over glass overlap or not covered space?
Has anyone with a spigen case experienced drops onto the screen side? Did the phone survive?
I am asking becauase for this model spigen front lip only goes over the top and bottom, not the sides.
They're suppose to be good. No side guards is an issue not just for face plants but to prevent accidental touches when holding.
I've been using the Zizo Bolt, it can suck up 3-4 foot drops onto concrete. I've inadvertently tested close to a dozen times. Easy to hold, stays clean and easy to clean. It's very durable except for it's inner case kickstand. Gone through 3 in a year.
They will replace it for $7, the case is $20.
It offers excellent spen corner protection which is the preferred touchdown corner in drops
Because of its overall drop protection and ease of use, it's the only one I use. Because of possible material fatigue after a few hard corner hits it's best to replace it anyway. Coming up on the 2 year mark with zero damage to the 10+.
Always use a plastic screen protector, if you go bare the display will get scratched. Been using Gorilla IQ Sheild for over a year, on my second one. Cheap and durable.
blackhawk said:
They're suppose to be good. No side guards is an issue not just for face plants but to prevent accidental touches when holding.
I've been using the Zizo Bolt, it can suck up 3-4 foot drops onto concrete. I've inadvertently tested close to a dozen times. Easy to hold, stays clean and easy to clean. It's very durable except for it's inner case kickstand. Gone through 3 in a year.
They will replace it for $7, the case is $20.
It offers excellent spen corner protection which is the preferred touchdown corner in drops
Because of its overall drop protection and ease of use, it's the only one I use. Because of possible material fatigue after a few hard corner hits it's best to replace it anyway. Coming up on the 2 year mark with zero damage to the 10+.
Always use a plastic screen protector, if you go bare the display will get scratched. Been using Gorilla IQ Sheild for over a year, on my second one. Cheap and durabwhen
Click to expand...
Click to collapse
Is the $7 replacement only for manufacturing defects or does it apply to wear and tear?
I have the black/black one, have you tried the gunmetal gray one?
Darklandscape said:
Is the $7 replacement only for manufacturing defects or does it apply to wear and tear?
I have the black/black one, have you tried the gunmetal gray one?
Click to expand...
Click to collapse
Blk/blk is my favorite, have both.
Wear isn't an issue with these cases, other than the kickstand they look like new after months of service. Many times I swap out the new kickstand and keep using the case
I now have a black case with a grey kickstand.
Not Zizo's fault if it takes some hard corner hits so I don't turn those in. Plus the fact the visible damage is a slight shininess that indicates the material has been stressed rather than gross visible damage.
Sort of like a pair of shoes, they all wear out if you pound em.
The important thing for me is ease of use and keeping the 10+ from being damaged. If that costs me $20 every couple months, I'm good with that. After over 18 months there's zero damage to the 10+ in spite of some nasty drops onto concrete. I feel bad about those drops but I be feeling much worse if it had been damaged.
I've only used Spigen Ultra Hybrid and I drop my phone constantly with no breakage.