Related
Hi Folks
My tab only stuck Android logo, ask for password. i enter password then again comes android logo and nothing
I tried hard reset combination. but none worked for me. is there any solution to this problem ?
a solid hard reset combination ? or a rom which will recover my device from this state ?
Any help would be greatly appreciated.
Thanks & regards
subr4t4 said:
Hi Folks
My tab only stuck Android logo, ask for password. i enter password then again comes android logo and nothing
I tried hard reset combination. but none worked for me. is there any solution to this problem ?
a solid hard reset combination ? or a rom which will recover my device from this state ?
Any help would be greatly appreciated.
Thanks & regards
Click to expand...
Click to collapse
Sounds like you'll need to try to do a factory wipe from recovery and then flash a zip of the stock rom (which you'll need to copy to your SD card)
Did forget your own password or buy this one hot?
dottat said:
Sounds like you'll need to try to do a factory wipe from recovery and then flash a zip of the stock rom (which you'll need to copy to your SD card)
Did forget your own password or buy this one hot?
Click to expand...
Click to collapse
Probably not a good idea for him to answer that if it's the latter.
dottat said:
Sounds like you'll need to try to do a factory wipe from recovery and then flash a zip of the stock rom (which you'll need to copy to your SD card)
Did forget your own password or buy this one hot?
Click to expand...
Click to collapse
Thanks for reply
Trying to factory wipe by following some hard reset manual but none worked for me.
No, password i know still i can enter.
Trying to restore with Update or Full package.
Acer_A500_0.000.00_4.017.07_EMEA_CUS7_1311771237783_253e5e46.zip
Acer_A500_0.000.00_4.010.42_EMEA_GEN3_1311244577711_036d89ae New.zip
Tried with this 2 files, but none worked yet.
which file i ve to try from here ?
http://forum.xda-developers.com/showthread.php?t=1113878
??
anyone else ? i m still stuck
Did you try a full wipe of the tablet? Hold down the volume up key and the power button until the tablet vibrates. Release the power button while still holding the volume up key, and slide the screen lock button (next to the volume up key) to the right and then back to the left.
The screen should display 'Erasing Userdata', you can then release the volume key. It should then erase the cache, Acer says it can take 5-10 minutes to complete. The tablet should then reboot, and you may be able to get in from the stock settings.
If the tablets hangs at 'Erasing Cache' for more than 15 minutes, force a power down by holding in the power key. The try the power/volume/lock routine again.
subr4t4 said:
Tried with this 2 files, but none worked yet.
Click to expand...
Click to collapse
What doesn't work exactly? Did you get an error during installation? Or was installation successful but the problem still exists?
ThatGeekGuy said:
Did you try a full wipe of the tablet? Hold down the volume up key and the power button until the tablet vibrates. Release the power button while still holding the volume up key, and slide the screen lock button (next to the volume up key) to the right and then back to the left.
The screen should display 'Erasing Userdata', you can then release the volume key. It should then erase the cache, Acer says it can take 5-10 minutes to complete. The tablet should then reboot, and you may be able to get in from the stock settings.
If the tablets hangs at 'Erasing Cache' for more than 15 minutes, force a power down by holding in the power key. The try the power/volume/lock routine again.
Click to expand...
Click to collapse
Tried exactly same as u said, it shows "Erasing cach before sd update" then it brings recovery icon. nothing........
sc2k said:
What doesn't work exactly? Did you get an error during installation? Or was installation successful but the problem still exists?
Click to expand...
Click to collapse
Installation was 80% but not success........ stuck @ Recovery logo
anyone else with any other idea? m still stuck......
I have the same issues. I have tried installing new roms, and still get the same issues. Any ideas would be great
Hallo guys, i just flashed N7000XXLPY via ODIN. Everything worked well but I have one big issue (that wasn't discussed in "bugs" thread).
Whatever I select, Swipe Unlock, Face recognition, Draw pattern, PIN code or whatever, it reacts the same: never requires swipe, PIN, pattern or else for unlocking. If i press briefly the power button, the display light switchs off. If I press again any other button (volume, home or power), the display light turns on but never asks for any method of unlocking. What to do? Does anyone else have the same issue?
Not happening here. Try a hard-reset after flashing a new ROM.
I have swipe unlock by default and it works. Screen does not power on when you press volume button, only if you press power or home button.
Thanks vcespon for your quick response. I tried hard reset via "Volume UP + Home + Power" method, I wiped cache, I tried hard reset via changing the CSC, I restored it to factory settings from menu, nothing worked. Any other oppinion?
LE: I found another issue, maybe is related with the first one. When I want to switch off the phone, I press (for 2 seconds) the power button and it just go to Samsung logo and swhitches off, without asking me those two questions about what I want to do (to can choose beetween flight mode, silent and power off) and if I'm sure that I want to power off the phone.
LE2: Tryed also Indian version (N7000DDLP8), no improvements.
ludiconiric said:
Thanks vcespon for your quick response. I tried hard reset via "Volume UP + Home + Power" method, I wiped cache, I tried hard reset via changing the CSC, I restored it to factory settings from menu, nothing worked. Any other oppinion?
LE: I found another issue, maybe is related with the first one. When I want to switch off the phone, I press (for 2 seconds) the power button and it just go to Samsung logo and swhitches off, without asking me those two questions about what I want to do (to can choose beetween flight mode, silent and power off) and if I'm sure that I want to power off the phone.
LE2: Tryed also Indian version (N7000DDLP8), no improvements.
Click to expand...
Click to collapse
DO NOT WIPE ON LPY!!!
http://forum.xda-developers.com/showthread.php?t=1633938
DaanJordaan said:
DO NOT WIPE ON LPY!!!
http://forum.xda-developers.com/showthread.php?t=1633938
Click to expand...
Click to collapse
I already did it, not knowing that I might brick it.
Thanks for the advice, I won't do it in the future till a safe official Kernel will be released.
Any solve to the issue that I have?
After another search I can see that there are others that encounter the same problem, here is the topic http://forum.xda-developers.com/showthread.php?t=1651005
Hello Sir
Sir i am facing the same problem i have bought galaxy not n7000 and the problem i am facing is i have updated it to official ics indian rom and now i am not able to activate screen lock function and if i hold the lock buttton for 2-3 seconds the phone gets switched off, is it because of the kernel problem or anything else, i tried giving it to the samsung store but they dint fixed it. P.S i was not able to update my mobile through Kies as it said "this device can not be updated through kies" please help...
I just found a fast way to fix this problem.
1. Root your device.
2. Use this solution:
Download from Market "Terminal Emulator"
Open it and type this commands:
su
echo -n ON > /efs/imei/keystr
sync
reboot
100% works !
vcespon said:
not happening here. Try a hard-reset after flashing a new rom.
I have swipe unlock by default and it works. Screen does not power on when you press volume button, only if you press power or home button.
Click to expand...
Click to collapse
are u serious??? Never ever hard reset on the lpy!
Hello Sir
yes it worked, but will it go away if i flash it again with other rom and dont root it???
Hello!
So the problem started today, when my phone got shutted down ( because battery was 4%.. ) and when i was able to charge it, this sh#t started.
So, some things first:
- I'm not able to get to the place ( phone off -> volume down and turn phone on ) where i could flash wp6.5 or do task29
- I couldn't enter into rom because it froze to the part where HTC is green with black background
- Rom worked with safe mode
- USB flasher doesn't work in malgdr
- Buttons are messy ( but i have now figured how they work )
- I*M NOT ABLE TO HARD RESET, when it says " press volume up to reset ", it does nothing. I have to take off the battery to get off there.
+ I'm able to go to AD recovery, and do anything there
+ I'm able to use USB MassStg
So what can I do? Or what should i do? This is really sad to me. I've flashed roms since March with great succes, but now I face a problem like this in normal use. So i'm pretty confused.
I'm able to take some video if you need it.
Not sure did i make it to the right section, but i hope i made.
Hey u said that your buttons are messy and you figured out how they work. can you tell me i they started working. coz my hd2 is stuck on htc logo screen and not going to bootloader after pressing the power and volume down key . ithink their some malfuncaning in volume down key......... plz reply fast
---------- Post added at 07:26 PM ---------- Previous post was at 07:07 PM ----------
keetsy said:
Hello!
So the problem started today, when my phone got shutted down ( because battery was 4%.. ) and when i was able to charge it, this sh#t started.
So, some things first:
- I'm not able to get to the place ( phone off -> volume down and turn phone on ) where i could flash wp6.5 or do task29
- I couldn't enter into rom because it froze to the part where HTC is green with black background
- Rom worked with safe mode
- USB flasher doesn't work in malgdr
- Buttons are messy ( but i have now figured how they work )
- I*M NOT ABLE TO HARD RESET, when it says " press volume up to reset ", it does nothing. I have to take off the battery to get off there.
+ I'm able to go to AD recovery, and do anything there
+ I'm able to use USB MassStg
Hey u said that your buttons are messy and you figured out how they work. can you tell me i they started working. coz my hd2 is stuck on htc logo screen and not going to bootloader after pressing the power and volume down key . ithink their some malfuncaning in volume down key......... plz reply fast
So what can I do? Or what should i do? This is really sad to me. I've flashed roms since March with great succes, but now I face a problem like this in normal use. So i'm pretty confused.
I'm able to take some video if you need it.
Not sure did i make it to the right section, but i hope i made.
Click to expand...
Click to collapse
Hey u said that your buttons are messy and you figured out how they work. can you tell me i they started working. coz my hd2 is stuck on htc logo screen and not going to bootloader after pressing the power and volume down key . ithink their some malfuncaning in volume down key......... plz reply fast
keetsy said:
Hello!
So the problem started today, when my phone got shutted down ( because battery was 4%.. ) and when i was able to charge it, this sh#t started.
So, some things first:
Click to expand...
Click to collapse
I am going to try to explain this a little and maybe it will help you out.
keetsy said:
- I'm not able to get to the place ( phone off -> volume down and turn phone on ) where i could flash wp6.5 or do task29
Click to expand...
Click to collapse
What you are talking about is called bootloader and this is probably caused by a faulty volume down button. Unless you check the hardware for the volume down button and fix it if it is faulty there is no other fix for this issue unless you are using Windows Mobile then you can use the enterbootloader.exe.
keetsy said:
- I couldn't enter into rom because it froze to the part where HTC is green with black background
Click to expand...
Click to collapse
It froze on what is called the splash screen and this is not all in all just a major issue and can more than likely be fixed.
keetsy said:
- Rom worked with safe mode
Click to expand...
Click to collapse
Safe mode on a device is the same as safe mode on a computer, it will allow you to boot the device and hopefully find the problem or fix the problem.
keetsy said:
- USB flasher doesn't work in malgdr
Click to expand...
Click to collapse
This is probably a driver issue and is only needed to flash a Android recovery or to flash a Windows Phone ROM.
keetsy said:
- Buttons are messy ( but i have now figured how they work )
Click to expand...
Click to collapse
I would like some more info on this actually as far as what buttons you are talking about. It also plays into what I said about a faulty volume down button.
keetsy said:
- I*M NOT ABLE TO HARD RESET, when it says " press volume up to reset ", it does nothing. I have to take off the battery to get off there.
Click to expand...
Click to collapse
This is because you have MAGLDR installed, there is no software for the device to reset.
keetsy said:
+ I'm able to go to AD recovery, and do anything there
Click to expand...
Click to collapse
This is good because I think recovery just may be what you need to use to fix your issue.
keetsy said:
+ I'm able to use USB MassStg
Click to expand...
Click to collapse
This is also good because you can transfer any needed files to your SD card using this.
keetsy said:
So what can I do? Or what should i do? This is really sad to me. I've flashed roms since March with great succes, but now I face a problem like this in normal use. So i'm pretty confused.
I'm able to take some video if you need it.
Not sure did i make it to the right section, but i hope i made.
Click to expand...
Click to collapse
I assume you are using a Android ROM because you said you can still use AD recovery. I suggest you read the first couple of post in the thread for the ROM you are using to find the suggested partition size you need as you may not have the right partition size if that is the case you will need to re partition your device but without being able to use USB flasher you will not be able to flash a new recovery with your new partition size. But you you should be able to edit a recovery and use it with AD sd, look in my guide linked in my sig for more infor on using recovery from SD card.
Also you can try to do a wipe of your cache and delvik cache and see if that helps. You can also try to make a backup of your ROM and re flash the Android ROM to see if that helps.
But to be honest with you your situation is odd because it did not happen right after you flashed a ROM. This sorta leads me to beleive you may have hardware issues.
LOL, when i started the phone today, the buttons worked normally. In Malgdr & AD recovery.
Of course, i tried to go to bootloader and I did. After that I flashed WM6.5 succesfully.
I'm going to upload a video about this all today or tomorrow. Rendering the video just now.
Edit: Installed this rom: http://forum.xda-developers.com/showthread.php?t=1912740
Still, back and "windows" button are bugging. Sometimes when i press them, they change the volume and the real volume buttons do the same.
Edit 2: You can watch the video here: http://www.youtube.com/watch?v=mDMZQRzcZmM
keetsy said:
LOL, when i started the phone today, the buttons worked normally. In Malgdr & AD recovery.
Of course, i tried to go to bootloader and I did. After that I flashed WM6.5 succesfully.
I'm going to upload a video about this all today or tomorrow. Rendering the video just now.
Edit: Installed this rom: http://forum.xda-developers.com/showthread.php?t=1912740
Still, back and "windows" button are bugging. Sometimes when i press them, they change the volume and the real volume buttons do the same.
Edit 2: You can watch the video here: http://www.youtube.com/watch?v=mDMZQRzcZmM
Click to expand...
Click to collapse
I watched the video and I gotta say I think you have hardware issues. I would recommend you find someone to take a lookk at you volume buttons and the hardware buttons to see about fixing them. Both sets of buttons are replaceable.
I'll try to take care of that.
Thank you really much !
Hello fellow people...
So, my lovely Android (LG P700) is stuck in a bootloop. So, here's the story of my phone:
1) I bought it and eventually managed to root it.
2) The same day I installed CyanogenMod 10. Everything worked so fine.
3) Later I upgraded to KitKat prime (Based on CM11). Pretty darn fine, but it was laggy like hell.
4) So I decided to downgrade back to CM10. It worked, BUT THEN - it ignored my SIM card completely and when dialed *#06# I found that my IMEI got torn off my phone.
5) So I installed AOKP KitKat. Was REALLY good but it didn't have some crucial-to-me options, so I found somewhat tasty...
6) And I installed the Pac-Man ROM. And something went quite wrong, because it only booted every third time, else it gave black screen, but everything worked really fine. But later, I noticed that Wi-Fi won't turn on, so guess what...
7) AND WHAM! MY WORST MISTAKE! Wait for it... I decided to install the Phenom kernel (Idiot me, it was made for CM10...), TADAA!
8) After the LG icon it gave me 3 random stripes distorted and pink in color. And the recovery is nothing but black screen.
9) So I tried to flash rooted v20d kdz to it... Nope. Only stuck on stock boot animation and the three button combo won't work, no recovery, no black screen, no data wipe option.
10) I used the official KDZ updater... Same sh* as 9).
11) Tried flashing rooted v10k... NOPE, the flasher is throwing the error: WParam: 4, IPARAM:1002.
NOTICE - Yes, I did data/cache/dalvik/system wipes everytime when I upgraded my ROM/changed kernels. I also used GApps every time.
Anyone can help me?
Thanks in advance!
My solution
Jakemeow said:
Hello fellow people...
So, my lovely Android (LG P700) is stuck in a bootloop. So, here's the story of my phone:
1) I bought it and eventually managed to root it.
2) The same day I installed CyanogenMod 10. Everything worked so fine.
3) Later I upgraded to KitKat prime (Based on CM11). Pretty darn fine, but it was laggy like hell.
4) So I decided to downgrade back to CM10. It worked, BUT THEN - it ignored my SIM card completely and when dialed *#06# I found that my IMEI got torn off my phone.
5) So I installed AOKP KitKat. Was REALLY good but it didn't have some crucial-to-me options, so I found somewhat tasty...
6) And I installed the Pac-Man ROM. And something went quite wrong, because it only booted every third time, else it gave black screen, but everything worked really fine. But later, I noticed that Wi-Fi won't turn on, so guess what...
7) I decided to install the Phenom kernel (Idiot me, it was made for CM10...)
8) After the LG icon it gave me 3 random stripes distorted and pink in color. And the recovery is nothing but black screen.
9) So I tried to flash rooted v20d kdz to it... Nope. Only stuck on stock boot animation and the three button combo won't work, no recovery, no black screen, no data wipe option.
10) I used the official KDZ updater... Same sh* as 9).
11) Tried flashing rooted v10k... NOPE, the flasher is throwing the error: WParam: 4, IPARAM:1002.
NOTICE - Yes, I did data/cache/dalvik/system wipes everytime when I upgraded my ROM/changed kernels. I also used GApps every time.
Anyone can help me?
Thanks in advance!
Click to expand...
Click to collapse
I had almost the same problem yesterday. My phone could go to emergency mode. If yours too then try this. Download the V20a ROM with root and CMW (it's really important to use this one): http://forum.xda-developers.com/showthread.php?t=2214717 (thanks Homero2 so much!),
- Installed the msxml file in the KDZ folder
- Run KDZ_FW_UPD.exe as administrator
- Set it to 3GQCT and DIAG, open the V20a kdz file and press "Launch software update"
- I still got a lparam error, but here's the great thing about this ROM. Even though I still got a bootloop, I MANAGED TO GET INTO RECOVERY! Instructions: Press the power button and the volume - button at the same time. When capacitive buttons turn up, press the menu button. When LG logo appears, release the power button. (REMEMBER: VOLUME "-" BUTTON AND MENU BUTTON NOT HOME....
- Recovery shows up.
- After that, I pushed a downloaded ROM (zip file) to my SD card and installed it via CMW succesfully!
Use CPA rom for p700/005 this time, it bugless and remember to factory data reset.
Hope it helps you!
mandeepsingh said:
I had almost the same problem yesterday. My phone could go to emergency mode. If yours too then try this. Download the V20a ROM with root and CWM (it's really important to use this one): http://forum.xda-developers.com/showthread.php?t=2214717 (thanks Homero2 so much!),
- Installed the msxml file in the KDZ folder
- Run KDZ_FW_UPD.exe as administrator
- Set it to 3GQCT and DIAG, open the V20a kdz file and press "Launch software update"
- I still got a IParam error, but here's the great thing about this ROM. Even though I still got a bootloop, I MANAGED TO GET INTO RECOVERY! Instructions: Press the power button and the volume - button at the same time. When captive buttons turn up, press the menu button. When LG logo appears, release the power button. (REMEMBER: VOLUME "-" BUTTON AND MENU BUTTON NOT HOME....
- Recovery shows up.
- After that, I pushed a downloaded ROM (zip file) to my SD card and installed it via CWM successfully!
Use CPA ROM for p700/705 this time, it bugless and remember to factory data reset.
Hope it helps you!
Click to expand...
Click to collapse
Thanks a lot, but... recovery won't turn on, everytime I try to push vol-/menu/power button combo nothing happens and the phone tries to boot up as it would normally leaving it in an infinite bootscreen... Btw, my home button is broken and the vol- button is brokenish and I need a few tries to press it normally AND the captive button lights, well... they won't turn on anytime, just dark touch-able areas and that's all. I'll try to get to recovery though.
EDIT: BTW, you sure it's DIAG not EMERGENCY?
mandeepsingh said:
I had almost the same problem yesterday. My phone could go to emergency mode. If yours too then try this. Download the V20a ROM with root and CMW (it's really important to use this one): http://forum.xda-developers.com/showthread.php?t=2214717 (thanks Homero2 so much!),
- Installed the msxml file in the KDZ folder
- Run KDZ_FW_UPD.exe as administrator
- Set it to 3GQCT and DIAG, open the V20a kdz file and press "Launch software update"
- I still got a lparam error, but here's the great thing about this ROM. Even though I still got a bootloop, I MANAGED TO GET INTO RECOVERY! Instructions: Press the power button and the volume - button at the same time. When capacitive buttons turn up, press the menu button. When LG logo appears, release the power button. (REMEMBER: VOLUME "-" BUTTON AND MENU BUTTON NOT HOME....
- Recovery shows up.
- After that, I pushed a downloaded ROM (zip file) to my SD card and installed it via CMW succesfully!
Use CPA rom for p700/005 this time, it bugless and remember to factory data reset.
Hope it helps you!
Click to expand...
Click to collapse
Hey, it worked! Thanks, I managed to get to recovery! *Psst, admin, you can lock this thread or whatsoever*
Happy to help You!!!
Jakemeow said:
Hey, it worked! Thanks, I managed to get to recovery! *Psst, admin, you can lock this thread or whatsoever*
Click to expand...
Click to collapse
Lol I thought its just me whose home button and volume- button isn't working!!!!! But I pressed the button hard and it went into recovery!!!!! Glad to help you!!!! ENjoy!!!!!
I am super new to rooting I mainly use it for PokemonGo. I am following this video on YouTube.
Basically when I flashed via Odin, I then install Magisk. Then everything is working and rooted BUT when I restart my phone my Magisk is then magically unrooted (I dont know if this is the right term) it says 'Magisk is not installed' and underneath that is says 'Magisk Manager is up to date'
So why does it keep doing this? Everytime this happens I need to Flash again via Odin and do the whole procedure again. This only happens when I restart the phone. Why does it keep doing this and how do I fix this? I will pay someone who can fix this for me. Ive been trying to figure out for the past day and Im going insane. I have no knowledge about rooting etc like i said i just want to play Pokemongo location spoofing.
Appreciate everyones help.
If you are on the stock ROM, you need to restart into recovery to activate Magisk.
Hi what is a stock rom and do I have that? What is this recovery? Sorry I am new
littlepuppies said:
Hi what is a stock rom and do I have that? What is this recovery? Sorry I am new
Click to expand...
Click to collapse
Donkeykong307 said:
If you are on the stock ROM, you need to restart into recovery to activate Magisk.
Click to expand...
Click to collapse
How do I do that?
You can press Power + Bixby + Volume Up then after seeing the bootloader warning screen, release all buttons so it can boot to the system.
You can also enable advanced restart in developer options.
Stock ROM is the one that comes with the phone.
Donkeykong307 said:
You can press Power + Bixby + Volume Up then after seeing the bootloader warning screen, release all buttons so it can boot to the system.
You can also enable advanced restart in developer options.
Stock ROM is the one that comes with the phone.
Click to expand...
Click to collapse
Hi yes I remember doing the 'Power + Bixby + Volume Up' after flashing. So that part is done unless I'm doing something wrong?
What is this advance restart in developer options? Where is that and what does it do? If I do this what do I do after? Will this fix the Magisk not installed when I restart my phone? Also when I turn off my phone and turn it back on it works and it keeps Magisk so its just restarting the phone that is causing the problem.
Appreciate your help
So this topic is the same as the other one I replied to hence the "double vision" comment.
I believe you need to Power + Bixby + Volume Up every time you restart.
Advanced restart will allow you to enable rebooting into recovery (magisk mode), so you don't need to press the button combo, unless you need the actual recovery.
What guide did you use to install magisk?
Donkeykong307 said:
I believe you need to Power + Bixby + Volume Up every time you restart.
Advanced restart will allow you to enable rebooting into recovery (magisk mode), so you don't need to press the button combo, unless you need the actual recovery.
What guide did you use to install magisk?
Click to expand...
Click to collapse
If I press that when I restart phone then isn't that risky? If I mess up then I need to format my phone again to get magisk again?
Whats this advance rebooting? Will this fix my problem?
I followed this video https://youtu.be/o3a8YnWT3yk
Just looking at that video I'm not sure if advanced restart is an option on the stock ROM, i use LineageOS (custom ROM).
The button combo shouldn't be risky, if you hold it for too long just select the option to restart and try again.
Donkeykong307 said:
Just looking at that video I'm not sure if advanced restart is an option on the stock ROM, i use LineageOS (custom ROM).
The button combo shouldn't be risky, if you hold it for too long just select the option to restart and try again.
Click to expand...
Click to collapse
I'm really confused so which part of the video am I suppose to do?
Since you already have magisk, you need to press the button combo every time you restart, if you want magisk.
Pressing the button combo activates magisk., and holding the button combo activates the recovery.
Donkeykong307 said:
Since you already have magisk, you need to press the button combo every time you restart, if you want magisk.
Pressing the button combo activates magisk., and holding the button combo activates the recovery.
Click to expand...
Click to collapse
OK so everything I restart my phone I need to hold down bixy, volume up and power? When do i stop holding down the combo? Also let's say I mess up will my magisk not work or can I restart my phone again and do the combo or do I have to re flash via Odin and format phone? Sorry I just want to make sure because I've re flashed and formated my phone about 90000 times ?
Thank you
littlepuppies said:
OK so everything I restart my phone I need to hold down bixy, volume
Click to expand...
Click to collapse
i have a feeling, that you should read these 3 links at least one more time:
magisk: https://topjohnwu.github.io/Magisk/install.html#samsung-system-as-root
TWRP Method 1: https://forum.xda-developers.com/ga...ecovery-twrp-3-3-0-galaxy-s10-exynos-t3924856
TWRP Method 2: https://forum.xda-developers.com/ga...covery-twrp-3-3-1-0-s10e-update-2020-t4067765
blackspy_ said:
i have a feeling, that you should read these 3 links at least one more time:
magisk: https://topjohnwu.github.io/Magisk/install.html#samsung-system-as-root
TWRP Method 1: https://forum.xda-developers.com/ga...ecovery-twrp-3-3-0-galaxy-s10-exynos-t3924856
TWRP Method 2: https://forum.xda-developers.com/ga...covery-twrp-3-3-1-0-s10e-update-2020-t4067765
Click to expand...
Click to collapse
Thata so confusing especially the twrp guide
have fun being banned in ur pokemon go game after ur rooted also if it even works on a rooted device
elliwigy said:
have fun being banned in ur pokemon go game after ur rooted also if it even works on a rooted device
Click to expand...
Click to collapse
elliwigy, are you being sarcastic there ?
blackspy_ said:
elliwigy, are you being sarcastic there ?
Click to expand...
Click to collapse
nope