Related
[FONT="]As some of us including myself have been wondering how do i update my honor 7 while running android 5.0.2 to the latest Marshmallow 6.0 update if my honor 7 is rooted?
[/FONT]
[FONT="]I have successfully updated to The latest Marshmallow 6.0 using this method[/FONT][FONT="] and i was running b180 rooted
[/FONT]
[FONT="]I have a uk version of honor 7 so the process will be the same except the firmware files for your country.[/FONT][FONT="]
[/FONT][FONT="]Please back your phone as i have done with titanium backup and Hisuite
[FONT="]I[/FONT] don't take any responsibility for any damage caused by your mistakes[/FONT][FONT="]
[/FONT] [FONT="]Step 1: We need to unroot honor 7 before doing anything else
open superSU scroll down and you will see an option full unroot click and phone should reboot sometime it may not reboot so dont worry just to be sure download root checker app from play store to see if unroot has been successful[/FONT]
[FONT="]Step 2: Head to your computer and download and install the following tool:
[/FONT][FONT="]http://forum.xda-developers.com/show....php?t=2433454[/FONT]
[FONT="]Step 3: Download the [FONT="]full[/FONT] complete update file (B121) from:
[/FONT][FONT="]http://www.modaco.com/forums/topic/3...s-121115-b140/[/FONT][FONT="]
Then, extract it and get its UPDATE.app file.[/FONT]
· [FONT="]Step 4: [/FONT]Use the Huawei Update Extractor to extract the (BOOT.img), (SYSTEM.img), (RECOVERY.img), (CACHE.img), (CUST.img),) from the UPDATE.app file that you have extracted from Step 3.
[FONT="]Step 5: Open your command prompt, and navigate to the right directory where you have extracted the image files. Use the “cd” and “..” commands to do so.[/FONT]
[FONT="]Step 6: Type the following commands and execute them one by one
[/FONT]
Code:
fastboot reboot bootloaderTest if your device is detected by typing
the following command fastboot devices while you are in the bootloader mode
Then execute the these commands
fastboot flash boot BOOT.img
fastboot flash system SYSTEM.img
fastboot flash recovery RECOVERY.img
fastboot flash cache CACHE.img
fastboot flash cust CUST.img
[FONT="]Step 7: Navigate to your sd card and copy the dload [/FONT]folder that you have extracted from Step 3 to the root of your sd card. Note inside the dload folder is the update file UPDATE.APP
· [FONT="]Step 8: Hold volume + and volume – at the same time then hold the power button don’t let go until you see Huawei software installation screen, Once installation is done phone will reboot and android system will load after setup process you will get a ota update notification, Click on it and update to b180 [/FONT]
· [FONT="]Step 9: Go to http://www.hihonor.com/uk/support/ and [/FONT][FONT="]Download the latest complete update file honor 7 firmware[/FONT][FONT="] (PLK-L01, Andriod 6.0, EMUI4.0, C432B330, United Kingdom) [/FONT]
Step 10: Extract The files download in Step 9 And you will see a folder called dload copy that folder to the root of your sd card .
Note if you already have a folder called dload then just copy the APDATE.APP from the dload folder to your sd cards dload folder
· [FONT="]Step [FONT="]11[/FONT]: Hold volume + and volume – at the same time then hold the power button don’t let go until you see Huawei software installation screen[/FONT]
You may get installation failed error don’t worry just reboot the system and enjoy the Official Marshmallow 6.0 update.:good:
Thanks for the guide, however, I couldn't get it to work on my UK H7. I'm already on B180 with no root and bootloader still locked so I just proceeded from step 9. I placed the UPDATE.APP from the update.zip I downloaded to the dload folder but it fails (like you said) but when i reboot i'm still on B180.
I also tried just placing the update.zip directly into dload but that also fails after attempting a local update.
Any ideas?
Andy4Shurr said:
Thanks for the guide, however, I couldn't get it to work on my UK H7. I'm already on B180 with no root and bootloader still locked so I just proceeded from step 9. I placed the UPDATE.APP from the update.zip I downloaded to the dload folder but it fails (like you said) but when i reboot i'm still on B180.
I also tried just placing the update.zip directly into dload but that also fails after attempting a local update.
Any ideas?
Click to expand...
Click to collapse
I used german file and it failed at 98% but when phone reboot its b330... i was on b180.
its strange but everything works fine.
no root of course
Tile0107 said:
I used german file and it failed at 98% but when phone reboot its b330... i was on b180.
its strange but everything works fine.
no root of course
Click to expand...
Click to collapse
Did you start from step 1 or did you already have B180 like me?
I downloaded this file: http://www.hihonor.com/de/support/details/?DOC_ID=77508
than i create dload folder and copy this,( unziped and take update.app) to sd card. Next i open the updater and start.
phone restart goes to 98% than i saw on screen "failed", phone reboot and its b330 i dont know how but work fine...
Tile0107 said:
I downloaded this file: http://www.hihonor.com/de/support/details/?DOC_ID=77508
than i create dload folder and copy this,( unziped and take update.app) to sd card. Next i open the updater and start.
phone restart goes to 98% than i saw on screen "failed", phone reboot and its b330 i dont know how but work fine...
Click to expand...
Click to collapse
Thanks Tile, we both started from the same point with the same firmware then :/
I'll try again.
Andy4Shurr said:
Thanks Tile, we both started from the same point with the same firmware then :/
I'll try again.
Click to expand...
Click to collapse
Oh and one more thing my phone dont wipe after this update. I tried again now to update it was completed and phone restart, now my phone was wiped...
Strange...
Andy4Shurr said:
Thanks for the guide, however, I couldn't get it to work on my UK H7. I'm already on B180 with no root and bootloader still locked so I just proceeded from step 9. I placed the UPDATE.APP from the update.zip I downloaded to the dload folder but it fails (like you said) but when i reboot i'm still on B180.
I also tried just placing the update.zip directly into dload but that also fails after attempting a local update.
Any ideas?
Click to expand...
Click to collapse
Hi Andy
I think it maybe because you are not rooted or you may have done something different.
Try downloading the files again.
If not follow this official guide if you are not rooted http://www.modaco.com/forums/topic/377073-how-to-update-your-honor-7-to-marshmallow/
Tile0107 said:
Oh and one more thing my phone dont wipe after this update. I tried again now to update it was completed and phone restart, now my phone was wiped...
Strange...
Click to expand...
Click to collapse
I backed up, just in case.
I tried again, the update went really quick (like 15 seconds) then said it was complete and I restarted. Since then it has been sat with the honor boot up logo for about 10 minutes... I'm just going to wait and hopefully it will boot into the android system
EDIT: So it's not progressing from the boot logo... I went into the recovery and wiped/factory reset to see if that would help but it's just sat at the boot logo again and won't go any further
I can obviously get to recovery and to the update screen so I'll have to try and download the full B121 ROM and put it on my SD card to try again.
Andy4Shurr said:
I backed up, just in case.
I tried again, the update went really quick (like 15 seconds) then said it was complete and I restarted. Since then it has been sat with the honor boot up logo for about 10 minutes... I'm just going to wait and hopefully it will boot into the android system
EDIT: So it's not progressing from the boot logo... I went into the recovery and wiped/factory reset to see if that would help but it's just sat at the boot logo again and won't go any further
I can obviously get to recovery and to the update screen so I'll have to try and download the full B121 ROM and put it on my SD card to try again.
Click to expand...
Click to collapse
Are you running custom recovery or stock?
If you are on stock recovery Start a fresh install
download the full B121 firmware flash it and after setup you should get OTA update notification proceed with the update once the update it done to b180 download the full firmware for marshmallow from here http://www.hihonor.com/uk/support/details/?DOC_ID=77509
Extract the zip file once done you will see a dload folder copy the UPDATE.APP to you dload folder in your sd card then go to settings and update click on local update and update the phone.
Let me know if it worked.
alphadude said:
Are you running custom recovery or stock?
If you are on stock recovery Start a fresh install
download the full B121 firmware flash it and after setup you should get OTA update notification proceed with the update once the update it done to b180 download the full firmware for marshmallow from here http://www.hihonor.com/uk/support/details/?DOC_ID=77509
Extract the zip file once done you will see a dload folder copy the UPDATE.APP to you dload folder in your sd card then go to settings and update click on local update and update the phone.
Let me know if it worked.
Click to expand...
Click to collapse
Yes, full stock. Never rooted or unlocked bootloader. I agree, I think the full 121 upgrade path is probably the best option now, I'm in the process of copying over the update.app from the 121 firmware to my sd card as we speak. I tried the 330 update while I was at work and didn't have my usb sd card reader so I've only just managed to get home and start that now.
EDIT: I'm just getting the update failed message now when attempting to install the B121 Update.App... about 6% into the update, then just asks to reboot system which gets stuck at the boot logo again :/
EDIT 2: After repeatedly trying and switching between B100, B120 and B330 update.App files to try and reflash the firmware the B330 version finally decided to do a full install and complete 100%. Very strange how it literally just decided to work this time but all's well that ends well I guess. If anyone else has this issue then just persevere and keep trying, hopefully it will just work one time!
Thanks Tile and Alphadude for trying to figure it out
for unrooted B180 this is how i did it
I went from B180>B320>B330
downloaded B320 to sd card
extracted intermediate file to sdcard/dload
EMUI update app and manual update
it restarted and did its buisness
deleted the UPDATE.APP from dload folder and copied in the full UPDATE.APP
EMUI update app and manual update
it restarted and did its buisness
then once restarted back into the emui update app and it said the 330 update was available OTA
no data loss through any of it
joelk2 said:
for unrooted B180 this is how i did it
I went from B180>B320>B330
downloaded B320 to sd card
extracted intermediate file to sdcard/dload
EMUI update app and manual update
it restarted and did its buisness
deleted the UPDATE.APP from dload folder and copied in the full UPDATE.APP
EMUI update app and manual update
it restarted and did its buisness
then once restarted back into the emui update app and it said the 330 update was available OTA
no data loss through any of it
Click to expand...
Click to collapse
Which b320 download did you use, do you have a link.
sbellseb said:
Which b320 download did you use, do you have a link.
Click to expand...
Click to collapse
I used this one from the French honor sitehttp://www.hihonor.com/fr/support/details/?DOC_ID=72951
joelk2 said:
I used this one from the French honor sitehttp://www.hihonor.com/fr/support/details/?DOC_ID=72951
Click to expand...
Click to collapse
I'll try that one. I followed a different one which failed. Thanks.
sbellseb said:
I'll try that one. I followed a different one which failed. Thanks.
Click to expand...
Click to collapse
Make sure you flash the intermediate file first and then the main update
I doff my cap. It worked. An error at 95%, plodded on through and I'm now on MM B330.
Good work. I've noticed an improved battery life on b330
joelk2 said:
Good work. I've noticed an improved battery life on b330
Click to expand...
Click to collapse
There's nothing great that I've come across yet. No data lost either doing the upgrade so I'm happy to be on MM.
After the update everything else seems to be working fine and smooth, but i've had several sudden restarts and couple of freezes.
Hello, today i have decided to update to nougat so i have downloaded and installed CAN-L01C150B330 from firmware search, when i go to settings the updater tab is missing, if i search updater on setting, updater is show but i can`t open it....so i have tried to do a factory reset, phone boot into recovery stared factory reset but stopped at 5%.
I am the only one with the missing updater and the factory reset error?
What i`m doing wrong?
Here are the steps fallowed to install nougat:
- unlock bootloader
- download the firmware
- extract update.app and copy to dload folder in the root of sd card
- extract recovery.img from update.app with huawei extract tool
- flash extracted recovery.img with fastboot
- boot into recovery and update to nougat.
I had the same issue. After i installed the eu update package, i got the updater in settings back.
BaLLi89 said:
I had the same issue. After i installed the eu update package, i got the updater in settings back.
Click to expand...
Click to collapse
how did you install?? i have tried to install as instructed but update failed
make it like Jozinek has written in this thread (https://forum.xda-developers.com/nova-plus/how-to/c432b320-android-7-0-available-try-t3527084)
only i have the eu update package just as extracted and installed as the full package.
1. download both zip files
2. extract the full update zip and put the UPDATE.APP file in the dload directory on the root of your sd card
3. force updating by (poweroff your phone and) holding all three buttons on right side together
4. wait until the update is complete
5. extract the eu update zip and put the UPDATE.APP file in the dload directory on the root of your sd card
6. force updating by (poweroff your phone and) holding all three buttons on right side together
7. you have it (i hope so )
Forgive me if my English is not the best
BaLLi89 said:
make it like Jozinek has written in this thread (https://forum.xda-developers.com/nova-plus/how-to/c432b320-android-7-0-available-try-t3527084)
only i have the eu update package just as extracted and installed as the full package.
1. download both zip files
2. extract the full update zip and put the UPDATE.APP file in the dload directory on the root of your sd card
3. force updating by (poweroff your phone and) holding all three buttons on right side together
4. wait until the update is complete
5. extract the eu update zip and put the UPDATE.APP file in the dload directory on the root of your sd card
6. force updating by (poweroff your phone and) holding all three buttons on right side together
7. you have it (i hope so )
Forgive me if my English is not the best
Click to expand...
Click to collapse
solved. :good:
BaLLi89 said:
make it like Jozinek has written in this thread (https://forum.xda-developers.com/nova-plus/how-to/c432b320-android-7-0-available-try-t3527084)
only i have the eu update package just as extracted and installed as the full package.
1. download both zip files
2. extract the full update zip and put the UPDATE.APP file in the dload directory on the root of your sd card
3. force updating by (poweroff your phone and) holding all three buttons on right side together
4. wait until the update is complete
5. extract the eu update zip and put the UPDATE.APP file in the dload directory on the root of your sd card
6. force updating by (poweroff your phone and) holding all three buttons on right side together
7. you have it (i hope so )
Forgive me if my English is not the best
Click to expand...
Click to collapse
Still i am not able to install the eu pack, uptade stops at 52%.
i dont know, if anything is wrong with your unlocked bootloader combined with the update package. that is the only idea i have.
BaLLi89 said:
i dont know, if anything is wrong with your unlocked bootloader combined with the update package. that is the only idea i have.
Click to expand...
Click to collapse
Bootloader was locked....i just don't know why update stops at 52%. Now i'm back on android 6, i'll wait for the oficial update.
Hu guys.. i have p9 plus and after i updte to nougat, my updater goes missing. Can sombody pls help me.. my build number changed into NDR90M test keys.. wht to do?
Iamdesireeabalos said:
Hu guys.. i have p9 plus and after i updte to nougat, my updater goes missing. Can sombody pls help me.. my build number changed into NDR90M test keys.. wht to do?
Click to expand...
Click to collapse
In got the same problem. Don't you have a small update package for eu verion? I didn't manage to install update for eu version so i'm stuck at beta version, i have to wait the official stable release.
Look here https://www.google.ro/amp/www.theandroidsoul.com
Hi everyone!
I just noticed that my P8 Lite ALE-L21C128B130 hasn't been updated since a while and i was wondering why i didn't receive Marshmallow. Turns out my provider does not support P8 Lite anymore hence we didn't receive any OTA. The past two days i've been reading about updating manually and i successfully unlocked my bootloader.
My firmware is ALE-L21C128B130 and i've read on the internet that before the 6.0 update i should put ALE-L21C432B170 on it. I tried it, created a dload folder and put the UPDATE.app in it. Rebooted but i always get the "Software install failed" error and it reboots with the original L21C128B130.
Please help me find a solution for this problem because now i downloaded the third B170 firmware but everytime "Software install failed".
What should i download? Which versions of the firmwares? And do i need to do anything else except putting a dload and selecting "Update from local" in the EMUI menu? I'm putting the dload folder on the internal memory of my phone cause I have a class 4 SD card and i read somewhere that it wont work from that one. My phones internal memory has 2,8GB free space out of 16, could this be the problem? If so what should i delete, cause i checked every folder on it and i just cant find what takes up to 10+GB of storage.
Thanks and cheers from Hungary!
bozont said:
Hi everyone!
I just noticed that my P8 Lite ALE-L21C128B130 hasn't been updated since a while and i was wondering why i didn't receive Marshmallow. Turns out my provider does not support P8 Lite anymore hence we didn't receive any OTA. The past two days i've been reading about updating manually and i successfully unlocked my bootloader.
My firmware is ALE-L21C128B130 and i've read on the internet that before the 6.0 update i should put ALE-L21C432B170 on it. I tried it, created a dload folder and put the UPDATE.app in it. Rebooted but i always get the "Software install failed" error and it reboots with the original L21C128B130.
Please help me find a solution for this problem because now i downloaded the third B170 firmware but everytime "Software install failed".
What should i download? Which versions of the firmwares? And do i need to do anything else except putting a dload and selecting "Update from local" in the EMUI menu? I'm putting the dload folder on the internal memory of my phone cause I have a class 4 SD card and i read somewhere that it wont work from that one. My phones internal memory has 2,8GB free space out of 16, could this be the problem? If so what should i delete, cause i checked every folder on it and i just cant find what takes up to 10+GB of storage.
Thanks and cheers from Hungary!
Click to expand...
Click to collapse
unlock bootloader and flash b052 in fastboot and vendor file europe (c432)( cheak mega thread on xda),later flash b170 and android 6.0!!
I just received the information that there is a new OTA update WAS-LX1AC432B184, but it failed to install I think because it want to patch the system, vendor and custom partition instead of adding file. With Firmware Finder I found the full version, is there a way I can force my phone to use the full version and not the OTA to do the update?
Will it delete all of may files?
Thanks
I believe it will wipe your phone so you will lose all data.
To force the update put the 'update.app' file in a folder named 'dload' (if no dload folder just make one) to the root of your sd card.
With the phone dialer type *#*#2846579#*#* and select software upgrade or, turn your phone off and press and hold volume up and down buttons and power on the phone, this will force update.
You could also contact Huawei support (via Hi Care App) who might be able to help you install the failed update.
i received notification for WAS-LX1AC432B185 (i have the 4 GB version)
update failed, because i had TWRP flashed and after reboot it tried to flash the update in TWRP.
so, i flashed stock recovery in fastboot and then the update was succesfull.
[email protected]@[email protected] said:
i received notification for WAS-LX1AC432B185 (i have the 4 GB version)
update failed, because i had TWRP flashed and after reboot it tried to flash the update in TWRP.
so, i flashed stock recovery in fastboot and then the update was succesfull.
Click to expand...
Click to collapse
I tried the same, but it doesn't work. I added the update of some System application inside the System Directory and I think that this is the Problem.
Reading the script for the update/rebrand for Mate9 and P10 I found this command:
$ADB shell "echo --update_package=$TARGET_UPDATE > /cache/recovery/command"
if I download only update.zip from Full-MT through Firmware Finder and copy it for example in /dload (adb push update.zip /dload) and then launch
adb shell " echo /dload/update.zip > /cache/recovery/command"
adb reboot recovery
Will it update my phone without doing a factory reset like if it was an OTA update?
In the update.zip there are the full Version of System, Vendor and Custom Partition instead of only the patch files.
Thanks
I tried but it doesn't work.
I found a tricky solution.
I accepted and download the 3 update files then I don't do immediately the installation, but I substitute in the directory where they where stored (/data/update/HwOUC/serie of number) the update.zip with the full-OTA that I downloaded through FF. I had to change owner, group and SE contest with that of the original file.
After that I tell the system update to perform the update.
The phone rebooted and the update started at end I received an error message, the system rebooted showing the old version B182 but patch updated to 1st September.
Immediately I receive a notification of a system update, but this time the FULL-OTA was proposed I did again the update and this time everything works fine. NOw my Telephone is B184
After that I had to reinstall TWRP and reroot it.
Hope it helps
[SOLVED] Hi i was on l-31c432b381 firmware with emui 5.0 and android 7.0, i have unlocked the bootloader for install magisk 12.0 and have root permissions, after months i saw an update for my phone (b389) so i tried to upgrade but i had twrp so error 1 or 7, i flashed the stock recovery, redowload the update and the install failed at 5%, so i tried to unistall magisk before update, but nothing it wont update, after few tries the upgrader says that the update now is not 300mb but is full and is 2gigs, so i think is the time.. but no. so i tried to force the update with 3 buttons recovery dload method but it doesn't work at all 5% at every try. so i searched for support and i found that the ota connot be installed on unlocked devices, so i tried to relock my bootloader with oem relock and the unlock number but it says root type is risk... so i can't even relock my bootloader.. other says that i have to install to relock or can relock... but is b381 the stock? or they instend the mm version? i don't remember what version p9 lite ships. i tried to flash imgs through fastboot but even if i flash system and boot of the b389 the system boot and the info are of the b381, unisatlling app system crash, so i restored my previous backup made through twrp recovery, i immidiatly noticed that the huawei boot animations was gone and was an android stock animation. i thinked it was fine and all was working properly, i give up o upgrade and i was fine but sad. after few hours i tried to make a paper copy with my printer that have nfc but my phone keep shows and hide nfc symbol like on off on off on off over and over even after reboot, after a call i understand that the audio doesn't was working, every type of audio not work even the mic. i don't see any other problems but without sounds is unusable as a phone or mulimedia things... sorry for bad english please HELP i tried all i founded ...
Franseven said:
Hi i was on l-31c432b381 firmware with emui 5.0 and android 7.0, i have unlocked the bootloader for install magisk 12.0 and have root permissions, after months i saw an update for my phone (b389) so i tried to upgrade but i had twrp so error 1 or 7, i flashed the stock recovery, redowload the update and the install failed at 5%, so i tried to unistall magisk before update, but nothing it wont update, after few tries the upgrader says that the update now is not 300mb but is full and is 2gigs, so i think is the time.. but no. so i tried to force the update with 3 buttons recovery dload method but it doesn't work at all 5% at every try. so i searched for support and i found that the ota connot be installed on unlocked devices, so i tried to relock my bootloader with oem relock and the unlock number but it says root type is risk... so i can't even relock my bootloader.. other says that i have to install to relock or can relock... but is b381 the stock? or they instend the mm version? i don't remember what version p9 lite ships. i tried to flash imgs through fastboot but even if i flash system and boot of the b389 the system boot and the info are of the b381, unisatlling app system crash, so i restored my previous backup made through twrp recovery, i immidiatly noticed that the huawei boot animations was gone and was an android stock animation. i thinked it was fine and all was working properly, i give up o upgrade and i was fine but sad. after few hours i tried to make a paper copy with my printer that have nfc but my phone keep shows and hide nfc symbol like on off on off on off over and over even after reboot, after a call i understand that the audio doesn't was working, every type of audio not work even the mic. i don't see any other problems but without sounds is unusable as a phone or mulimedia things... sorry for bad english please HELP i tried all i founded ...
Click to expand...
Click to collapse
Hi, my english is bad too , B389 is an OTA update, its impossible upgrade via fstboot or via TWRP (error 7). IMO the right way to fix your problems - downgrade to MM , then back to Nougat etc. (remove pattern Lock , Fingerprint lock, root etc. before installing downgrade). It will erase all your phone data!!!
Download official rollback package for your VNS-L31C432
http://download-c1.huawei.com/download/downloadCenter?downloadId=93789&version=373429&siteCode=sk
and download MM firmware VNS-L31C432B161 (Single SIM)
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v66022/f1/full/update.zip
1) Create a new folder dload in root directory of SD card (root directory : it means dont put it in any folder .) Now unpack the rollback package and copy its contents “UPDATE.APP” to the “dload” folder. Use the 3 button combo installation. After your firmware version should now be on “B300” or "test-keys".
2) Remove from dload folder rollback package, extract the ZIP file with MM firmware to the dload folder and use 3 combo button installation.
Or you can use this method : on your phone launch the phone dialer app and dial *#*#2846579#*#*. Next, select Project Menu – > Software upgrade – > SDcard upgrade – > and confirm the flashing process that is about to be initiated.
Good luck!
bozka1 said:
Hi, my english is bad too , B389 is an OTA update, its impossible upgrade via fstboot or via TWRP (error 7). IMO the right way to fix your problems - downgrade to MM , then back to Nougat etc. (remove pattern Lock , Fingerprint lock, root etc. before installing downgrade). It will erase all your phone data!!!
Download official rollback package for your VNS-L31C432
http://download-c1.huawei.com/download/downloadCenter?downloadId=93789&version=373429&siteCode=sk
and download MM firmware VNS-L31C432B161 (Single SIM)
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v66022/f1/full/update.zip
1) Create a new folder dload in root directory of SD card (root directory : it means dont put it in any folder .) Now unpack the rollback package and copy its contents “UPDATE.APP” to the “dload” folder. Use the 3 button combo installation. After your firmware version should now be on “B300” or "test-keys".
2) Remove from dload folder rollback package, extract the ZIP file with MM firmware to the dload folder and use 3 combo button installation.
Or you can use this method : on your phone launch the phone dialer app and dial *#*#2846579#*#*. Next, select Project Menu – > Software upgrade – > SDcard upgrade – > and confirm the flashing process that is about to be initiated.
Good luck!
Click to expand...
Click to collapse
Ok i'm posting in real time now. i'm copy update.app in dload folder (rollback)
it have completed ... wow
same android boot animation, the version says is nrd90m test keys (still no audio)
now i'm copying full mm firmware
its installing 40% i'm loving you.. 50% 60% 70%80%90% SUCCESS
user reset... OK
huawei boot animation with audio!!!!!!!!!!!!!!! and there is not unlocked text like (......can't be trusted...)
ok wifi connected skip.skip skip.... start
song... AUDIO WORKING
recording, its working, nfc ok
i'm on b161 and it shows update, now, can i update to the latest version?
THANK YOU SO MUCH
Franseven said:
Ok i'm posting in real time now. i'm copy update.app in dload folder (rollback)
it have completed ... wow
same android boot animation, the version says is nrd90m test keys (still no audio)
now i'm copying full mm firmware
its installing 40% i'm loving you.. 50% 60% 70%80%90% SUCCESS
user reset... OK
huawei boot animation with audio!!!!!!!!!!!!!!! and there is not unlocked text like (......can't be trusted...)
ok wifi connected skip.skip skip.... start
song... AUDIO WORKING
recording, its working, nfc ok
i'm on b161 and it shows update, now, can i update to the latest version?
THANK YOU SO MUCH
Click to expand...
Click to collapse
Yes, you can. Via OTA, or you can use TWRP (Meticulus 3.0.2.0 only ! ) and flash both .zip files. You must download two files:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v80474/f1/full/update.zip
and
http://update.hicloud.com:8180/TDS/...-L11_hw_eu/update_data_full_VNS-L11_hw_eu.zip.
In TWRP set Install, then select memmory SD card, and klick on
update.zip, confirm installation. After, STAY in TWRP, go back to Install, find file ...hw_eu....zip , confirm installation. Then select rebot system. Done!
bozka1 said:
Yes, you can. Via OTA, or you can use TWRP (Meticulus 3.0.2.0 only ! ) and flash both .zip files. You must download two files:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v80474/f1/full/update.zip
and
http://update.hicloud.com:8180/TDS/...-L11_hw_eu/update_data_full_VNS-L11_hw_eu.zip.
In TWRP set Install, then select memmory SD card, and klick on
update.zip, confirm installation. After, STAY in TWRP, go back to Install, find file ...hw_eu....zip , confirm installation. Then select rebot system. Done!
Click to expand...
Click to collapse
i've done b371 thrugh updater now it doesn't show newer versions but i'm using b389 dload and it should go ok right? (full b389 update.app)
Franseven said:
i've done b371 thrugh updater now it doesn't show newer versions but i'm using b389 dload and it should go ok right? (full b389 update.app)
Click to expand...
Click to collapse
Try it, but I think, you will get a message "not compatible" . Via dload its impossible, IMO use rather Huawei firmware finder or wait for OTA update.
bozka1 said:
Try it, but I think, you will get a message "not compatible" . Via dload its impossible, IMO use rather Huawei firmware finder or wait for OTA update.
Click to expand...
Click to collapse
yes it failed with b389 dload full
i'm on b371, i've to download and flash manually the b381 and after b389? where i can find otas?
Franseven said:
yes it failed with b389 dload full
i'm on b371, i've to download and flash manually the b381 and after b389? where i can find otas?
Click to expand...
Click to collapse
If I said, it's impossible manually update to 381 or 389 using OTA firmware, trust me . Try Firmware finder. GL!
bozka1 said:
If I said, it's impossible manually update to 381 or 389 using OTA firmware, trust me . Try Firmware finder. GL!
Click to expand...
Click to collapse
i tried full ota (firmware finder) flashes from twrp but gives error 7
e:unknown command [errno]
update_huawei_pkg_from_ota_zip: failed
Franseven said:
i tried full ota (firmware finder) flashes from twrp but gives error 7
e:unknown command [errno]
update_huawei_pkg_from_ota_zip: failed
Click to expand...
Click to collapse
https://m.youtube.com/watch?v=s5hHTZ4LGMM
bozka1 said:
https://m.youtube.com/watch?v=s5hHTZ4LGMM
Click to expand...
Click to collapse
it worked with the dns method not the proxy (was keeping redownload infinite patch over 4gigs tot crazy)
i'm now back at b381 with sound but without my data, i'm trying to reach b389 and over, can i restore through twrp only data partition without a hitch?
in b389 emui is 5.0.1 if i remember right. its data compatible? are the data the cause of no sound? thanks
ALL WORKED FINE , ALL SOLVED. currently b391 (latest) emui 5.0.1 and all my data, super happy thank you
2EDIT: nfc chip still not work, when selected emui crash. minor problem..
note: twrp by (that you said) didn't work in emui 5+ i'm using newer revolution based one twrp 3.03
Franseven said:
it worked with the dns method not the proxy (was keeping redownload infinite patch over 4gigs tot crazy)
i'm now back at b381 with sound but without my data, i'm trying to reach b389 and over, can i restore through twrp only data partition without a hitch?
in b389 emui is 5.0.1 if i remember right. its data compatible? are the data the cause of no sound? thanks
ALL WORKED FINE , ALL SOLVED. currently b391 (latest) emui 5.0.1 and all my data, super happy thank you
2EDIT: nfc chip still not work, when selected emui crash. minor problem..
note: twrp by (that you said) didn't work in emui 5+ i'm using newer revolution based one twrp 3.03
Click to expand...
Click to collapse
FF works with proxy fine, but you must first download and install Firmware finder proxy apk. On Nougat use TWRP 3.1.0-2.
---------- Post added at 21:03 ---------- Previous post was at 20:59 ----------
Franseven said:
it worked with the dns method not the proxy (was keeping redownload infinite patch over 4gigs tot crazy)
i'm now back at b381 with sound but without my data, i'm trying to reach b389 and over, can i restore through twrp only data partition without a hitch?
in b389 emui is 5.0.1 if i remember right. its data compatible? are the data the cause of no sound? thanks
ALL WORKED FINE , ALL SOLVED. currently b391 (latest) emui 5.0.1 and all my data, super happy thank you
2EDIT: nfc chip still not work, when selected emui crash. minor problem..
note: twrp by (that you said) didn't work in emui 5+ i'm using newer revolution based one twrp 3.03
Click to expand...
Click to collapse
FF works with proxy , but you must download and install Firmware finder proxy apk. On Nougat use TWRP 3.1.0-2.
OMG, sorry !