Related
***UPDATE***
Thanks to reply, I have now successfully done everything I set out to do, and created follow-up guide!
You can find it HERE
Original Post below:
Hello Everyone!
I'd like to start off saying I used to have a Nexus 4, with TWRP and Lollipop-based CyanogenMod. I was able to install this all by myself, and keep both TWRP and the ROM updated. I also flashed custom radio to unlock the LTE capability on that phone. My tool of choice to help customize the phone was Nexus Root toolkit.
I was able to follow guides posted long ago on these forums, to do what I wanted with the Nexus 4 back in 2013/2014, but it seems I'm not so capable these days. I've hit such a roadblock with lack of root and constant stutters/slowdowns with everyday use on my current device, the Axon 7, that I must get away from the stock software. I heard it was not so easy with other devices, and while a few devs have posted wonderful guides for users, it's just not enough for a true beginner like me. From skimming guides posted, it seems like devs already expect you to have installed custom recovery, or unlocked bootloader. Then when I try to do these things, so I can move onto custom ROM, it seems the guides are out of date or just not step-by-step enough for me to use, and I don't want to take a risk and brick my device trying things that I'm not sure about. I'm a power user through and through, but not so up-to-date or knowledgeable enough to be able to follow the guides already on the forums. Consider me 1 out of 5 on tech level for Android software.
Here's the model/software already on my device: Stock everything, from bootloader and recovery, to ROM.
Model: A2017U, Nougat 7.0 on B15 ROM
What I still need clarification on:
with my device already running on nougat, do I need to install the nougat universal bootloader/radio I saw in earlier guides?
will LineageOS have any downgrades in regard to audio quality, on either the headphone output or speakers?
will my ROM of choice have Daydream VR support? if not what would be needed?
this is not a big deal, but do I need a special app or entire custom ROM if I'm interested in a temporary unroot to use apps like Android Pay?
Here's what I want on my device: TWRP, LineageOS with root.
If anyone, expert users and devs alike, could reply with current known-good info about the following, I and a lot of other users would be eternally grateful:
unlocking the bootloader, installing TWRP, and LineageOS, in a stupidly long but simple step-by-step process.
Quick follow-up info:
What I can do so far: download current LineageOS nightly, correct version of root .zip, and TWRP from official websites
NO, I'm not good with using ADB on Windows to get things done. I had to ask a friend to help me install it on windows, the guide he sent was much easier than the one i was using, and he still had to walk me through how to use it once installed to help me unlock bootloader/root on another device, Zenphone Zoom if anyone is interested.
PLEASE, don't link me to other guides for any part of this process, if the steps are thorough and relevant, please copy here, of course with all due credit given to original poster.
Feel free to let me know if more info about my knowledge level or device is needed to help you work on my request.
Thanks for reading, here's to several years more of everyone enjoying this wonderful device!
ok there is three real steps, but it can be aheadache, mainly because you didn't unlock before going to nougat.
Step 1. Downgrade to B29 Marshmallow - go here https://www.zteusa.com/axon-7/ and on the support tab in software updates is a full B29 software package. Download it, unzip it once, then put the update.zip file on your SD card.
- on the phone, in developers options, turn on OEM unlocking (it is needed to flash from sd card)
- boot phone to recovery, choose update from sd card, pick the update.zip from the sdcard, the phone will flash the B29 software. It is a bit slow, let it do what it needs to do.
Step 2. Unlock phone and install TWRP - go here https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514 download the miflash program, fastboot unlock program, and twrp for B29.
- instructions are all there, just do what it says.
Step 3, Install LineageOS - https://forum.xda-developers.com/axon-7/development/unofficial-lineageos-14-1-zte-axon-7-t3545679 very straight forward. Don't forget to install first the bootloader, then the rom, then gapps.
What makes this so hard is not being easily able to unlock in nougat. Most of us here unlocked way before marshmallow
No need to downgrade to b29.
lafester said:
No need to downgrade to b29.
Click to expand...
Click to collapse
I was thinking this too. Should be as simple as the steps below
1) Flash signed twrp using axonroot tool - this pry's open the door
2) Using twrp, flash fastboot (b20_fbop or something?) - opens door wider
3) Enable usb debugging and oem unlocking in developer options
4) reboot to fastboot/bootloader mode
5) fastboot oem unlock - door is now wide open
Done.
gpz1100 said:
I was thinking this too. Should be as simple as the steps below
1) Flash signed twrp using axonroot tool - this pry's open the door
2) Using twrp, flash fastboot (b20_fbop or something?) - opens door wider
3) Enable usb debugging and oem unlocking in developer options
4) reboot to fastboot/bootloader mode
5) fastboot oem unlock - door is now wide open
Done.
Click to expand...
Click to collapse
Is that a "should work" or "does work" because I'm trying to root and install LOS also on stock non rooted nougat Axon 7 and so far I've gotten nowhere and no one seems to be able to give me a list that says Yes this works
Help needed
I followed the instructions and is apparently in a boot loop. Initially it was working but now it is not. I can't even wipe the device to start from scratch. Is there another ROM available to try?
kingoftheafro said:
Is that a "should work" or "does work" because I'm trying to root and install LOS also on stock non rooted nougat Axon 7 and so far I've gotten nowhere and no one seems to be able to give me a list that says Yes this works
Click to expand...
Click to collapse
This is exactly the reason I made my post, I need concrete answers not guesses. Glad to see someone else needs the same answers
kaiso said:
I followed the instructions and is apparently in a boot loop. Initially it was working but now it is not. I can't even wipe the device to start from scratch. Is there another ROM available to try?
Click to expand...
Click to collapse
Did you downgrade to Marshmallow B29 first or skip this step?
[email protected] said:
This is exactly the reason I made my post, I need concrete answers not guesses. Glad to see someone else needs the same answers
Click to expand...
Click to collapse
I'm praying that someone will compile the information spread about into 3 guides that are model specific so people like us won't rack our heads trying to figure out what on earth to do.
[email protected] said:
Hello Everyone!
Model: A2017U, Nougat 7.0 on B15 ROM
What I still need clarification on:
1with my device already running on nougat, do I need to install the nougat universal bootloader/radio I saw in earlier guides?
2will LineageOS have any downgrades in regard to audio quality, on either the headphone output or speakers?
3will my ROM of choice have Daydream VR support? if not what would be needed?
4this is not a big deal, but do I need a special app or entire custom ROM if I'm interested in a temporary unroot to use apps like Android Pay?
Here's what I want on my device: TWRP, LineageOS with root.
If anyone, expert users and devs alike, could reply with current known-good info about the following, I and a lot of other users would be eternally grateful:
unlocking the bootloader, installing TWRP, and LineageOS, in a stupidly long but simple step-by-step process.
Quick follow-up info:
What I can do so far: download current LineageOS nightly, correct version of root .zip, and TWRP from official websites
5NO, I'm not good with using ADB on Windows to get things done. I had to ask a friend to help me install it on windows, the guide he sent was much easier than the one i was using, and he still had to walk me through
Click to expand...
Click to collapse
Ok, I've edited your post to clear some of the clutter and numbered everything so I can answer everything.
1. No, bootloader updates are only for users who haven't updated to B15 (through official means)
2. Only audio issues are with the front facing speakers. The way they sound is if you turn them up to 100% and then push it even higher to like 140%. So if you keep it at about 71% they sound normal. Check this guide here to get even better quality on overall sound (headphones, speakers)
3.B15 and LOS both work with Daydream. I currently use LOS with my Daydream headset currently.
4.Magisk with this kernel here. Currently have fully functioning Android Pay with LOS.
5. This is a big problem. If you're not comfortable with ADB you should maybe rethink messing with this phone. EDL mode (which is how I flash TWRP and subsequently the B20 bootloader to unlock) is very similar to ADB and the tools needed to flash in EDL can brick your device. Learning how to use ADB isn't bad but it's good as a fallback so you're not relying on strangers to help you out in a pinch (which most will, I just like having the ability to do things mostly myself).
---------- Post added at 10:05 AM ---------- Previous post was at 09:55 AM ----------
nolimit78 said:
I'll keep on saying this as much as I need to, I get where you're coming from. There's a lot of data about the correct way of doing things. Best thing to do is read and search. When I got my phone B29 was the new hotness and there was a bunch of older data floating around that I had to sift through. But I did it, I sifted and found my own way and combined two different methods to get my phone rooted and flashed with LOS. Honestly, the trial and error, the searching, the sifting is totally worthwhile because while this device is /DIFFERENT/ compared to methods for HTC and Samsung products, it's not harder. It's better to get yourself properly antiquated to the device you plan on flashing/hacking/rooting because there is /always/ a chance for bricking. Then another thread will be created asking for help to unbrick. Take the time, read now, read everything, understand your device, then push forward.
Click to expand...
Click to collapse
I quoted this because this thread is like the third I've seen in the last couple days. But to offer some help, this is the guide that I've followed with two phones one running B29 stock and one running B15 Stock. It remains the same because of the use of EDL. It's also good in case you want to go back to complete stock (which at the time was speculated would brick your device) but I read between the lines and discovered that it's just not a big deal. Once you get TWRP installed, make sure your Data partition is EXT4, flash LOS, flash GApps and you're good to go.
The hardest part of the process, is getting your drivers to be recognized properly for the EDL flashing tool to work. Anti-Virus softwares tend to throw false positives with tools like the EDL Flashing tool. I installed a fresh copy of Windows 7 JUST to have a flashing station ready JIC. Once I did that, smooth sailing.
nolimit78 said:
Ok, I've edited your post to clear some of the clutter and numbered everything so I can answer everything.
1. No, bootloader updates are only for users who haven't updated to B15 (through official means)
2. Only audio issues are with the front facing speakers. The way they sound is if you turn them up to 100% and then push it even higher to like 140%. So if you keep it at about 71% they sound normal. Check this guide here to get even better quality on overall sound (headphones, speakers)
3.B15 and LOS both work with Daydream. I currently use LOS with my Daydream headset currently.
4.Magisk with this kernel here. Currently have fully functioning Android Pay with LOS.
5. This is a big problem. If you're not comfortable with ADB you should maybe rethink messing with this phone. EDL mode (which is how I flash TWRP and subsequently the B20 bootloader to unlock) is very similar to ADB and the tools needed to flash in EDL can brick your device. Learning how to use ADB isn't bad but it's good as a fallback so you're not relying on strangers to help you out in a pinch (which most will, I just like having the ability to do things mostly myself).
---------- Post added at 10:05 AM ---------- Previous post was at 09:55 AM ----------
I quoted this because this thread is like the third I've seen in the last couple days. But to offer some help, this is the guide that I've followed with two phones one running B29 stock and one running B15 Stock. It remains the same because of the use of EDL. It's also good in case you want to go back to complete stock (which at the time was speculated would brick your device) but I read between the lines and discovered that it's just not a big deal. Once you get TWRP installed, make sure your Data partition is EXT4, flash LOS, flash GApps and you're good to go.
The hardest part of the process, is getting your drivers to be recognized properly for the EDL flashing tool to work. Anti-Virus softwares tend to throw false positives with tools like the EDL Flashing tool. I installed a fresh copy of Windows 7 JUST to have a flashing station ready JIC. Once I did that, smooth sailing.
Click to expand...
Click to collapse
I've already used EDL mode from that page to put a fresh copy of stock nougat to, among other things, reduce the potential issues upgrading causes. So all I should have to do is flash B15-NEW_TWRP (Nougat) from that page and then fastboot unlock?
from there reset data/cache, flash custom ROM.
flash gapps
reboot, install apps.
?????
KyJelly69 said:
I've already used EDL mode from that page to put a fresh copy of stock nougat to, among other things, reduce the potential issues upgrading causes. So all I should have to do is flash B15-NEW_TWRP (Nougat) from that page and then fastboot unlock?
from there reset data/cache, flash custom ROM.
flash gapps
reboot, install apps.
?????
Click to expand...
Click to collapse
Yup.
kingoftheafro said:
Is that a "should work" or "does work" because I'm trying to root and install LOS also on stock non rooted nougat Axon 7 and so far I've gotten nowhere and no one seems to be able to give me a list that says Yes this works
Click to expand...
Click to collapse
In case you still need all this, I made a new guide after successfully doing everything:
https://forum.xda-developers.com/axon-7/how-to/complete-guide-to-unlocking-installing-t3561128
[email protected] said:
In case you still need all this, I made a new guide after successfully doing everything:
https://forum.xda-developers.com/axon-7/how-to/complete-guide-to-unlocking-installing-t3561128
Click to expand...
Click to collapse
Thank you for the guide, but I managed to get everything done without having to downagrade from Nougat. I was having issues with my Windows variant recognizing my phone after drivers were installed so I used Linux Mint 18.1 and everything went smooth as a whistle. I think the mods should pin your thread post.
I followed the rootjunkie YouTube videos, worked perfectly and the files were all available.
Sent from my ZTE A2017U using Tapatalk
Hey guys!
At first, this is my first post here so please be lenient if I posted this in the wrong section or whatever. I still need to get used to this forum.
Second, English is not my native language so it could become some gibberish from time to time. I also have to mention that my Android skills are somewhere between newbie and advanced, so please keep that in mind.
But let's get ahead to my problem:
Some days ago, I decided to install Linage OS 14 on my SM-N910F because I don't like the Stock Android 6.0.1 of it.
As you know, a custom ROM requires an unlocked bootloader an that's where my struggle starts.
I simply can't find any tutorial or similar for my phone. The only one I found didn't work (It was with adb fastboot, the process got stuck at "<wating for device>" after the command "fastboot unlock oem" which was described in the tutorial).
I retried it about three or four times before I gave up. It feels like I searched the entire internet, including this forum, but I couldn't find anything useful.
Maybe it's my fault because I didn't look properly, but yeah, know I'm here to ask directly:
Do you guys have any tricks, tipps, ideas or tutorials for me to try?
If it helps you, my phone is already rooted. (chainfire's CF Autoroot)
It'd make me really, really happy and already thank you for your (hopefully) incoming answers.
Vygravlil said:
Hey guys!
At first, this is my first post here so please be lenient if I posted this in the wrong section or whatever. I still need to get used to this forum.
Second, English is not my native language so it could become some gibberish from time to time. I also have to mention that my Android skills are somewhere between newbie and advanced, so please keep that in mind.
But let's get ahead to my problem:
Some days ago, I decided to install Linage OS 14 on my SM-N910F because I don't like the Stock Android 6.0.1 of it.
As you know, a custom ROM requires an unlocked bootloader an that's where my struggle starts.
I simply can't find any tutorial or similar for my phone. The only one I found didn't work (It was with adb fastboot, the process got stuck at "<wating for device>" after the command "fastboot unlock oem" which was described in the tutorial).
I retried it about three or four times before I gave up. It feels like I searched the entire internet, including this forum, but I couldn't find anything useful.
Maybe it's my fault because I didn't look properly, but yeah, know I'm here to ask directly:
Do you guys have any tricks, tipps, ideas or tutorials for me to try?
If it helps you, my phone is already rooted. (chainfire's CF Autoroot)
It'd make me really, really happy and already thank you for your (hopefully) incoming answers.
Click to expand...
Click to collapse
Pretty certain your bootloader isn't locked, you just need to install twrp with odin and then you are good to flash lineage
sawdoctor said:
Pretty certain your bootloader isn't locked, you just need to install twrp with odin and then you are good to flash lineage
Click to expand...
Click to collapse
Thank you for your fast reply. I'll try it once again, moreover I'll let you know if it worked.
It's me again. Flashing the ROM worked, my phone now runs under Linage OS 14.1. But now I've got another problem: Gapps. Somehow I can't flash the Gapps package, TWRP always tells me that the file is corrupted. I downloaded both the Pico and the Nano package for ARM Android 7.1* devices. Both don't work. I also tried the Android 7.0.* version, but that didn't work ofcourse. (Error 20: Wrong Android version installed on the device.) Is it my fault because I downloaded the wrong packages or what's the issue?
It'd be awesome if you could help me again.
Vygravlil
EDIT:
Okay, now it works. TWRP was right, the file was corrupted. I figured out that my PC kinda messed up the download of the package. I downloaded it with another computer and now everything works fine.
I have successfully booted the rr 7.1.2 rom from 4pda on my device every thing seems very well except in performance its much slower than the stuck firmware , also i have check the antutu score and it get lower by 10k points , i have check the gpu with another app and the working percent was stuck at 0%
So if any one could help fixing the hwc , kernel , hw coding and decoding,, it will make the device fly again
fir1996 said:
I have successfully booted the rr 7.1.2 rom from 4pda on my device every thing seems very well except in performance its much slower than the stuck firmware , also i have check the antutu score and it get lower by 10k points , i have check the gpu with another app and the working percent was stuck at 0%
So if any one could help fixing the hwc , kernel , hw coding and decoding,, it will make the device fly again
Click to expand...
Click to collapse
I have been trying to get this room to work but failed everytime, because of the encryption.
Everytime I get decryption successful but something went wrong. As far as I understand the encryption should be disabled on this ROM completely, but I can't get it done. I tried reformatting data to ext4 but that didn't work.
Edit: The problem was that I was using Magisk as root solution. I tried with the provided SuperSU and it all worked.
My device runs well with rr. I only notice the performance issue on startup, right after but the phone is very slow.
I noticed that there is no swap memory use in this ROM, while in stock there was a deal memory partition.
I'll try to figure out if we can enable it in this ROM. That might improve performance.
JudgeDread11 said:
I have been trying to get this room to work but failed everytime, because of the encryption.
Everytime I get decryption successful but something went wrong. As far as I understand the encryption should be disabled on this ROM completely, but I can't get it done. I tried reformatting data to ext4 but that didn't work.
Edit: The problem was that I was using Magisk as root solution. I tried with the provided SuperSU and it all worked.
My device runs well with rr. I only notice the performance issue on startup, right after but the phone is very slow.
I noticed that there is no swap memory use in this ROM, while in stock there was a deal memory partition.
I'll try to figure out if we can enable it in this ROM. That might improve performance.
Click to expand...
Click to collapse
Don't mean to hijack this thread but im desperate. Im trying to root mt MYA L22 but can't seem to find the right instructions. Posted here two times but no one is replying. Could you tell me how you unlocked bootloader on your phone? I already have the code from Huawei website. I am stuck at the cmd prompt when i type "list adb devices" from a cmd prompt opened through the adb and fastboot folder that ive downloaded. It says adb devices attached but shows nothing after that, basically an empty list. Any advice would be greatly appreciated!
Dylan2232 said:
Don't mean to hijack this thread but im desperate. Im trying to root mt MYA L22 but can't seem to find the right instructions. Posted here two times but no one is replying. Could you tell me how you unlocked bootloader on your phone? I already have the code from Huawei website. I am stuck at the cmd prompt when i type "list adb devices" from a cmd prompt opened through the adb and fastboot folder that ive downloaded. It says adb devices attached but shows nothing after that, basically an empty list. Any advice would be greatly appreciated!
Click to expand...
Click to collapse
It was a long time ago since I setup fastboot and ADB. I used this thread
https://forum.xda-developers.com/showthread.php?t=2277112&page=53
JudgeDread11 said:
It was a long time ago since I setup fastboot and ADB. I used this thread
https://forum.xda-developers.com/showthread.php?t=2277112&page=53
Click to expand...
Click to collapse
I went through that thread. I understand you rooted it but then started having problems? Like you couldn't download? Where you able to solve those problems? Now I am worried to root it.
Dylan2232 said:
I went through that thread. I understand you rooted it but then started having problems? Like you couldn't download? Where you able to solve those problems? Now I am worried to root it.
Click to expand...
Click to collapse
I'm not sure which post you saw, but I think my post on there were with an other device and yes, I have never bricked a device unrecoverable (yet).
That said, you will always be taking a risk when rooting or trying custom ROMS.
Then again if you never take risks you won't get anywhere. The question is how much are you willing to risk. In this case are you willing to risk your phone for the extra possibilities you might get when rooting it
First think you need to do before modifying anything is learning how to backup and restore.
JudgeDread11 said:
I'm not sure which post you saw, but I think my post on there were with an other device and yes, I have never bricked a device unrecoverable (yet).
That said, you will always be taking a risk when rooting or trying custom ROMS.
Then again if you never take risks you won't get anywhere. The question is how much are you willing to risk. In this case are you willing to risk your phone for the extra possibilities you might get when rooting it
First think you need to do before modifying any freething is learning how to backup and restore.
Click to expand...
Click to collapse
Thanks JudgeDread. Yes, I've rooted several phones in my life time. I understand the risk, but I tend to research about that particular rooting method with my phone before going ahead and doing it. I feel like the rooting method for my phone is particularly more risky, not because of what I read but rather from what info I am NOT able to find. Did you have a Huwaei Y5 2017 MYA l22 that you rooted successfully without issues? Can you point me to the instructions? That thread is a bit confusing.
Dylan2232 said:
Thanks JudgeDread. Yes, I've rooted several phones in my life time. I understand the risk, but I tend to research about that particular rooting method with my phone before going ahead and doing it. I feel like the rooting method for my phone is particularly more risky, not because of what I read but rather from what info I am NOT able to find. Did you have a Huwaei Y5 2017 MYA l22 that you rooted successfully without issues? Can you point me to the instructions? That thread is a bit confusing.
Click to expand...
Click to collapse
Yes exact same model, rooted and after several tries custom ROM.
I unlocked using the official method and then flashed TWRP in the recovery partition.
The difficulty was to get back into TWRP after rebooting. So I would advice to immediately install a root solution. I used Magisk. While root works without problem Magisk modules will only work if you use the f2fs workaround.
I am now running Resurrection remix (Android 7.1.2) without many issues. Only every now and then a forced close of the system UI.
It took some time to get it running. Because I used a different root solution the provided on the same page as the ROM. So on install use the provided SuperSU. After install you can change of you want.
Also the patches are needed. I still have bad videos on YouTube but haven't looked into the issue much yet.
hi , good news for Huawei y5 2017(MYA-L22) users.
Download latest lineage14.
visit to my blog.
cheers
https://p55novo.blogspot.com/2018/07...e-141-for.html
JudgeDread11 said:
Yes exact same model, rooted and after several tries custom ROM.
I unlocked using the official method and then flashed TWRP in the recovery partition.
The difficulty was to get back into TWRP after rebooting. So I would advice to immediately install a root solution. I used Magisk. While root works without problem Magisk modules will only work if you use the f2fs workaround.
I am now running Resurrection remix (Android 7.1.2) without many issues. Only every now and then a forced close of the system UI.
It took some time to get it running. Because I used a different root solution the provided on the same page as the ROM. So on install use the provided SuperSU. After install you can change of you want.
Also the patches are needed. I still have bad videos on YouTube but haven't looked into the issue much yet.
Click to expand...
Click to collapse
Thanks again for replying. Unfortunately though, 80 percent of what you just said flew over my head
I am not an expert but I can follow instructions! Any step by step guide on how to root it? So far I've gotten the unlock code from Huawei. I downloaded the ADB and fast boot folder and launched from that folder the cmd prompt. I type in "list of ADB deviced" and below comes an empty list. Please share what you did.
Dylan2232 said:
Thanks again for replying. Unfortunately though, 80 percent of what you just said flew over my head
I am not an expert but I can follow instructions! Any step by step guide on how to root it? So far I've gotten the unlock code from Huawei. I downloaded the ADB and fast boot folder and launched from that folder the cmd prompt. I type in "list of ADB deviced" and below comes an empty list. Please share what you did.
Click to expand...
Click to collapse
For rooting you need unlocked bootloader ( if you don't do ir then below won't work).
1)download the 4pda app from google play store and register an account .
2) download the TWRP.img file from 4pda website here is the link
https://4pda.ru/forum/index.php?showtopic=823938&view=findpost&p=74424572
3) enable developer mode in your phone by going to setting about phone , tap 6 times on the build number.
4)go to developer mode and enable usb debugging and oem factory unlock .
5) go to your pc install adb here link https://forum.xda-developers.com/showthread.php?t=2588979
6) now conect the phone to the pc and run cmd , type adb reboot bootloader . (Your device ahould restart and enter bootloader mode (white screen)).
7) now take the TWRP.img (must be copyied to desktop ) and type in cmd cd desktop.
8) type fastboot flash recovery TWRP.img (change the file name to TWRP ).
9) type fastboot reboot.
Now you have successfully install TWRP on your device.
Continue... If replied
Hi guys,
So, this is a last resort. I've followed a number of different guides and methods, but nothing has worked. The closest "success" I've had is with a Chainfire auto root; it flashes, it breaks Knox, but I still don't have SU. Could it be because I don't have an SD card? I saw it as a prerequisite in some guide but didn't really put much stock in it as that was a single mention which also involved loading it with verity, which I'm more interested in removing.
I've also tried twrp, which that looked like it had bricked my device, though I managed to recover it by flashing the auto root again. I'm speculating that it's something to do with the latest updates, but really I'm just clueless and frazzled after 4+ hours of wracking my brains. I'm not sure what other info you'd find helpful anymore without going full splurge, so I'll keep it sweet and let you question me or berate me for my vile, witholding ways as you see fit. Any help is greatly appreciated!
Edit:
My SU checker says that I've not got the binaries or root user account. The .tar from firmware.mobi is only 54mb. I tried turning off suhide, but changed no other options. Trying to use fastboot straight up fails, the device isn't recognised after adb booting (despite having tried the correct drivers and some random others multiple times over.) I've been unable to locate a release for the T585 on twrp site, though a version is out there on these forums from a year or so back.
Smellfungus said:
Hi guys,
So, this is a last resort. I've followed a number of different guides and methods, but nothing has worked. The closest "success" I've had is with a Chainfire auto root; it flashes, it breaks Knox, but I still don't have SU. Could it be because I don't have an SD card? I saw it as a prerequisite in some guide but didn't really put much stock in it as that was a single mention which also involved loading it with verity, which I'm more interested in removing.
I've also tried twrp, which that looked like it had bricked my device, though I managed to recover it by flashing the auto root again. I'm speculating that it's something to do with the latest updates, but really I'm just clueless and frazzled after 4+ hours of wracking my brains. I'm not sure what other info you'd find helpful anymore without going full splurge, so I'll keep it sweet and let you question me or berate me for my vile, witholding ways as you see fit. Any help is greatly appreciated!
Edit:
My SU checker says that I've not got the binaries or root user account. The .tar from firmware.mobi is only 54mb. I tried turning off suhide, but changed no other options. Trying to use fastboot straight up fails, the device isn't recognised after adb booting (despite having tried the correct drivers and some random others multiple times over.) I've been unable to locate a release for the T585 on twrp site, though a version is out there on these forums from a year or so back.
Click to expand...
Click to collapse
The only way I know of to successfully root a Tab A is by flashing TWRP and then using it to flash SU or Magisk. What version of TWRP are you using and what version of Odin? Using the correct ones won't brick a T585.
When I got my Tab A a couple of weeks ago I did a LOT of reading first ... but then it took less than 24 hrs from receiving it to having it rooted + running RR Oreo
Following the guide HERE I enabled OEM Unlocking and installed Odin.
Using Odin I flashed twrp-3.2.3-4-gtaxllte-OMNI6.tar from HERE.
Using the freshly installed TWRP I flashed RR-O-v6.2.1-20181210-gtaxllte-Unofficial.zip from HERE, Gapps from HERE and the latest Magisk from HERE.
That was it - rooted and ready to go :victory:
The first guide pretty much covers all the steps you need, I simply used a different TWRP version. You can't brick your device flashing TWRP unless you flash something that's not for your device. Make SURE to enable OEM Unlock first - and don't use SuperSU but Magisk.
Good luck :fingers-crossed:
Nimueh said:
When I got my Tab A a couple of weeks ago I did a LOT of reading first ... but then it took less than 24 hrs from receiving it to having it rooted + running RR Oreo
Following the guide HERE I enabled OEM Unlocking and installed Odin.
Using Odin I flashed twrp-3.2.3-4-gtaxllte-OMNI6.tar from HERE.
Using the freshly installed TWRP I flashed RR-O-v6.2.1-20181210-gtaxllte-Unofficial.zip from HERE, Gapps from HERE and the latest Magisk from HERE.
That was it - rooted and ready to go :victory:
The first guide pretty much covers all the steps you need, I simply used a different TWRP version. You can't brick your device flashing TWRP unless you flash something that's not for your device. Make SURE to enable OEM Unlock first - and don't use SuperSU but Magisk.
Good luck :fingers-crossed:
Click to expand...
Click to collapse
I am about to try this.... was you device on Android 7 (nougat) or Android 8 (Oreo) when you did this?
Thanks for your time.
webzo said:
I am about to try this.... was you device on Android 7 (nougat) or Android 8 (Oreo) when you did this?
Thanks for your time.
Click to expand...
Click to collapse
I honestly don't remember
But it should work on either one - only difference now is that we have an official recovery that can be downloaded from twrp.me directly :highfive:
Nimueh said:
When I got my Tab A a couple of weeks ago I did a LOT of reading first ... but then it took less than 24 hrs from receiving it to having it rooted + running RR Oreo
Following the guide HERE I enabled OEM Unlocking and installed Odin.
Using Odin I flashed twrp-3.2.3-4-gtaxllte-OMNI6.tar from HERE.
Using the freshly installed TWRP I flashed RR-O-v6.2.1-20181210-gtaxllte-Unofficial.zip from HERE, Gapps from HERE and the latest Magisk from HERE.
That was it - rooted and ready to go :victory:
The first guide pretty much covers all the steps you need, I simply used a different TWRP version. You can't brick your device flashing TWRP unless you flash something that's not for your device. Make SURE to enable OEM Unlock first - and don't use SuperSU but Magisk.
Good luck :fingers-crossed:
Click to expand...
Click to collapse
Does this need twrp-3.2.3-4-gtaxllte-OMNI6.tar to go from Oreo to Pie?
I am not finding -OMNI.tar anywhere. All links are dead.
Can I use a newer version of TWRP?
Thanks.
webzo said:
Does this need twrp-3.2.3-4-gtaxllte-OMNI6.tar to go from Oreo to Pie?
I am not finding -OMNI.tar anywhere. All links are dead.
Can I use a newer version of TWRP?
Thanks.
Click to expand...
Click to collapse
Ok, so I went ahead and tried with the latest TWRP (3.3.1.1), RR (v7.0.2).
Everything seemed to go well..... except, tablet is now stuck in boot animation. It won't startup.
I double checked and I don't think I missed any steps.... Any ideas on what I can try?
Thanks.
webzo said:
Ok, so I went ahead and tried with the latest TWRP (3.3.1.1), RR (v7.0.2).
Everything seemed to go well..... except, tablet is now stuck in boot animation. It won't startup.
I double checked and I don't think I missed any steps.... Any ideas on what I can try?
Thanks.
Click to expand...
Click to collapse
Update:
I tried to restore the backup via TWRP and ended up with a "unable to mount /system" error.
My /system partition was showing zero size.
Many wipes and restores didn't help.
Eventually, what seemed to help was to choose repair the system partition, change file system to FAT, change file system back to ext4. Saw it in a youtube video- https://www.youtube.com/watch?v=T-7neHzSIvc
After /system error was fixed, I did an install of RR again and it went smooth.
All is well now.
Hope this helps someone.
webzo said:
Does this need twrp-3.2.3-4-gtaxllte-OMNI6.tar to go from Oreo to Pie?
I am not finding -OMNI.tar anywhere. All links are dead.
Can I use a newer version of TWRP?
Thanks.
Click to expand...
Click to collapse
Back then we had no working official version and the Omni6 one was the only one without issues. Now we have the official and it should work just fine.
No idea why you had those problems, but I'm glad you got it all sorted
i have a op6t bootloader unlocked still on tmobile 10.3.3 oos. i want to flash the nethunter/andrax kernel on it so i can check em both out. i am wondering if i should bother trying to flash the international rom on it, or what might be the best rom to use as a base for a pentesting platform.
it is my first oneplus device, but i messed around with nethunter on the galaxy series and kali on maemo before it. ive just gotten the unlock token and flashed it, i tried to msm it to the international rom prior, but kept getting a 'packed image not found' type error. i guess it doesnt matter now, i can just use twrp. but any advice, or direction on what i should flash or install in what order would be Greatly appreciated, im just trying to read up on all of it as much as i can right now.
moisturerichsoy said:
i have a op6t bootloader unlocked still on tmobile 10.3.3 oos. i want to flash the nethunter/andrax kernel on it so i can check em both out. i am wondering if i should bother trying to flash the international rom on it, or what might be the best rom to use as a base for a pentesting platform.
it is my first oneplus device, but i messed around with nethunter on the galaxy series and kali on maemo before it. ive just gotten the unlock token and flashed it, i tried to msm it to the international rom prior, but kept getting a 'packed image not found' type error. i guess it doesnt matter now, i can just use twrp. but any advice, or direction on what i should flash or install in what order would be Greatly appreciated, im just trying to read up on all of it as much as i can right now.
Click to expand...
Click to collapse
Reading is good! You'll really need that as you're about to venture on a potential world of pain. I have the international version so it's been smooth sailing for me but I've read a lot about these TMO devices and either it'll work for you if you follow the right guides or it'll go south really fast. And when it does, there's an endless road back to square one. It can be an excellent learning experience and there will usually be a way out but it will require a lot of patience. If you don't have that, you might as well stay with stock. You know yourself best [emoji6]
Timmmmaaahh said:
Reading is good! You'll really need that as you're about to venture on a potential world of pain. I have the international version so it's been smooth sailing for me but I've read a lot about these TMO devices and either it'll work for you if you follow the right guides or it'll go south really fast. And when it does, there's an endless road back to square one. It can be an excellent learning experience and there will usually be a way out but it will require a lot of patience. If you don't have that, you might as well stay with stock. You know yourself best [emoji6]
Click to expand...
Click to collapse
super good to know, as it sounds like if i can get the msm flash to work, it will be just like an international one. or maybe i can twrp flash it to a newish international oos that will work well with nethunter. But i guess my first order of business should be twrp flash and pull a full backup just in case. i am indeed looking for an odyssey, ive been bricking arm devices since the nokia n800 days so im sure i can figure things out.
im thinking:
twrp
magisk
backup
flash newest internation oos (msm or twrp?)
flash nethunter/andrax kernel
install non chroot nethunter
install andrax
...
profit?
i dunno why but im unreasonably excited to get a pentesting phone running with a kernel that supports native monitor mode and packet injection
I got it all to work, with plenty of haphazard dirty flashing, and only like 3 softbricks where I had to go back to 9x with msm. So I'm on 10.3.7 with twrp, magisk, seems like I disabled encryption, cause I ran into that issue before, and I have no lockscreen code now. I doubt I could reproduce it all, but the nethunter/andrax kernel seemed to have stuck, after I got nethunter chroot installed, I verified monitor mode worked. Got andrax all installed too, everything seems to be functioning properly. Sooo many tools to play with now. It's weird, every time I did things properly, I'd end up bricking it, then I would try some convoluted dirty flash and it would work out just how I wanted it.
moisturerichsoy said:
I got it all to work, with plenty of haphazard dirty flashing, and only like 3 softbricks where I had to go back to 9x with msm. So I'm on 10.3.7 with twrp, magisk, seems like I disabled encryption, cause I ran into that issue before, and I have no lockscreen code now. I doubt I could reproduce it all, but the nethunter/andrax kernel seemed to have stuck, after I got nethunter chroot installed, I verified monitor mode worked. Got andrax all installed too, everything seems to be functioning properly. Sooo many tools to play with now. It's weird, every time I did things properly, I'd end up bricking it, then I would try some convoluted dirty flash and it would work out just how I wanted it.
Click to expand...
Click to collapse
Hey im going through some things with the install so i flashed a international rom after the last fix i did with a .bat file from another post which its running fine so far. so could you explain some details with how you went about it at least the decryption part this has me lost as in...
1= TWRP format data
2=flash all the things i need to flash
3= flash DM verity disable force encryption last
all within the twrp.img first boot? or is it all done after twrp is installed
first of all im fresh to all flashing roms and i have been reading like crazy haha just trying to clearify the missing info or lack of maybe.
moisturerichsoy said:
I got it all to work, with plenty of haphazard dirty flashing, and only like 3 softbricks where I had to go back to 9x with msm. So I'm on 10.3.7 with twrp, magisk, seems like I disabled encryption, cause I ran into that issue before, and I have no lockscreen code now. I doubt I could reproduce it all, but the nethunter/andrax kernel seemed to have stuck, after I got nethunter chroot installed, I verified monitor mode worked. Got andrax all installed too, everything seems to be functioning properly. Sooo many tools to play with now. It's weird, every time I did things properly, I'd end up bricking it, then I would try some convoluted dirty flash and it would work out just how I wanted it.
Click to expand...
Click to collapse
Dude could you please help me I can't get nethunter running for the life of me, so it sounds you flashed the kernel then flashed nethunter oos10 for the op6 using twrp but it worked for the op6t? I'm pretty new to phones had nethunter on a oneplus one but that was a cakewalk, I got a T-Mobile op6t running international
Hate to bump an old post but did anyone manage to figure out the flash order on this?
And if so care ta share I'll be forever in your debt