Is there any possible way to keep USB debugging on while being in MTP mode...I don't really care how hacky it is. That option keeps cutting off and acting stupid. There must be a way to keep it on at all times.
Developer options, turn on USB debugging. If it turns itself off, you have bigger problems to worry about.
agraceful said:
Developer options, turn on USB debugging. If it turns itself off, you have bigger problems to worry about.
Click to expand...
Click to collapse
What do you mean I have bigger problems to worry about?
jintrigger said:
What do you mean I have bigger problems to worry about?
Click to expand...
Click to collapse
USB debugging will not turn itself off once turned on. IF that is the case here then you have a significant problem with your software.
So why have I read this is typical of Honor phones?
https://forum.xda-developers.com/honor-8-pro/help/usb-debugging-getting-off-t3651152
https://forum.xda-developers.com/honor-8/help/usb-debugging-off-t3672785
So is it typical behavior or not? Regardless of the answer how do I fix it?
jintrigger said:
So why have I read this is typical of Honor phones?
https://forum.xda-developers.com/honor-8-pro/help/usb-debugging-getting-off-t3651152
https://forum.xda-developers.com/honor-8/help/usb-debugging-off-t3672785
So is it typical behavior or not? Regardless of the answer how do I fix it?
Click to expand...
Click to collapse
No. Did you read the solution? Neither allowed permission to the PC they used. There is a picture shown in one of your links that shows the little window that pops up. That is what you need to look for. If it doesn't show up, you must clear the recent attached items. I use driver booster, so I'm not sure how to do so otherwise. When you turn on your USB debugging it ALWAYS works in mtp mode, so look for that window that pops up once your program requests it.
Sorry, I was bit aggravated since this is holding up my work, but let me explain. This computer has already been allowed. Unless I have 'Allow USB debugging only in charge mode' or 'Allows prompt when connecting to USB' turned on, I cant get USB debugging to stay on. I'd like to default to MTP (so it doesn't prompt me) while using adb (so I have to allow debugging outside of charge mode)...I guess I'll be fine with the prompt...Just like to know if it's possible.
I do know from my own use that if you optimize the phone through phone manager, debugging will be turned off.
Sent from my XT1575 using XDA Labs
jintrigger said:
Sorry, I was bit aggravated since this is holding up my work, but let me explain. This computer has already been allowed. Unless I have 'Allow USB debugging only in charge mode' or 'Allows prompt when connecting to USB' turned on, I cant get USB debugging to stay on. I'd like to default to MTP (so it doesn't prompt me) while using adb (so I have to allow debugging outside of charge mode)...I guess I'll be fine with the prompt...Just like to know if it's possible.
Click to expand...
Click to collapse
I haven't found a way to link them. Everytime I restart my phone debugging turns off. I guess it's an EMUI limitation.
Sent from my Honor 8 using XDA Labs
ayush rao said:
I haven't found a way to link them. Everytime I restart my phone debugging turns off. I guess it's an EMUI limitation.
Sent from my Honor 8 using XDA Labs
Click to expand...
Click to collapse
...this won't be helpful but perhaps encouraging. it is possible as I was having the same issue. ...how i got it working I am not sure but my usb debugging survives reboots. perhaps try a few different combo's in the developer mode. for starters i do have always prompt when connect to usb = on; allow adb debugging in charge only mode = on
jasonvxs4 said:
...this won't be helpful but perhaps encouraging. it is possible as I was having the same issue. ...how i got it working I am not sure but my usb debugging survives reboots. perhaps try a few different combo's in the developer mode. for starters i do have always prompt when connect to usb = on; allow adb debugging in charge only mode = on
Click to expand...
Click to collapse
Well this is my config as of now. I've tried all the possible combinations but I can never get USB debugging to survive a reboot, but then again I never really dwelled into it since I hardly ever use it.
Thanks for the help though!
Sent from my Honor 8 using XDA Labs
ayush rao said:
Well this is my config as of now. I've tried all the possible combinations but I can never get USB debugging to survive a reboot, but then again I never really dwelled into it since I hardly ever use it.
Thanks for the help though!
Sent from my Honor 8 using XDA Labs
Click to expand...
Click to collapse
Scroll down in developer options and reset the settings and then enable USB debugging..
ayush rao said:
I haven't found a way to link them. Everytime I restart my phone debugging turns off. I guess it's an EMUI limitation.
Click to expand...
Click to collapse
This is a common problem with EMUI. The solution, keep toggling it until it sticks.
hackslash said:
This is a common problem with EMUI. The solution, keep toggling it until it sticks.
Click to expand...
Click to collapse
Ahhh. Thanks a lot for clearing this up :good:
Sent from my Honor 8 using XDA Labs
Related
I've finally figured out how to fix my Vibrant after the OTA disaster, however only thing is that even after installing the latest drivers it still won't recognize my phone. When I plug it in it says "Gadget". I don't know whats wrong.
gridironbear said:
I've finally figured out how to fix my Vibrant after the OTA disaster, however only thing is that even after installing the latest drivers it still won't recognize my phone. When I plug it in it says "Gadget". I don't know whats wrong.
Click to expand...
Click to collapse
Have you been to settings, applications, usb settings and set to ask on connection. You have to disable usb debugging though
Sent from my SAMOLED Vibrant using XDA app
Hi Guys,
I used the new Nexus 4 Toolkit to unlock the bootloader.
As I unfortunately dont have 10 Posts, I cant ask in this thread, so I hope it's ok to ask here.
I installed the drivers with USB-Debugging (as before for my galaxy nexus) and unlocked the bootloader.
So far everything went normal and good!
Then I wanted to root the system. It was said that I've to enable USB-Debugging again and the system will reboot.
But then :
I tap on "Enable USB-Debugging" and I'm asked If im sure. After this, nothing happens. Usually I see a information-icon, that usb-debugging is enabled in the taskbar.
This icon is now missing. And im completly not able to connect to phone via PC and use ADB.
Im slightly desperated, as anything I could do requires ADB/USB-Debugging.
Can you guys help me?
Thanks in advance.
Does your phone show up as MTP storage OK?
I remember my One X decided to cease all USB activity except charging once, a reboot sorted it.
The USB debugging icon is a little jelly bean as per the attached screenshot.
thanks for your reply.
I dont remember If it was shown as MPT-Storage - will check this immediately after work
THe Jelly-Bean-Icon showed up before, when used the toolkit to unlock the bootloader.
I also rebooted the phone several times
Ok, now everything seems to be identified correctly, again. Very strange.
Maybe the PC needed to be restarted.
Sorry for this post. It can be closed.
Thank you!
Were you able to resolve the problem?
I actually have the same problem also my Nexus 4 is getting very hot and the battery is drain within 4 hours from 100% to ~10% (about 400-800mA consumption).
All stock - I've already contacted the google support but now are holidays.
ev!denz said:
Were you able to resolve the problem?
I actually have the same problem also my Nexus 4 is getting very hot and the battery is drain within 4 hours from 100% to ~10% (about 400-800mA consumption).
All stock - I've already contacted the google support but now are holidays.
Click to expand...
Click to collapse
I've got the same problem, except my device is not loading until 100%. It gets really hot while not doing anything and it's empty in about 3 hours.
I figured out that the Nexus is only charged via "USB" although it's plugged in the charger.
Now my device is charging up until 100% but it still gets hot, is empty in about 5 hours and if I connect it in fastboot mode my laptop says that the drivers are not installed properly even though I installed the naked drivers. Re-installing the drivers does not work either, it says that my laptop already had the right drivers installed. And when I connect my device when it's booted it is not recognized at all and does not show up in the device manager. I tried three other cables... Sounds like an USB brick, right?
Ultraschorsch said:
Sounds like an USB brick, right?
Click to expand...
Click to collapse
That's what I think, too.
ev!denz said:
That's what I think, too.
Click to expand...
Click to collapse
Having the same trouble guys. Anyone found any insight into this or possibly a fix?
loopyoyo said:
Having the same trouble guys. Anyone found any insight into this or possibly a fix?
Click to expand...
Click to collapse
My battery life got a lot better with the new Franco kernel but the USB-debugging is just gone. I was wondering if maybe one of the recovery developers could help here. The USB brick solution for the HTC Desire was via Cyanogenmod. But I don't think that they know the solution since it isn't a very common problem as it seems...
Ultraschorsch said:
My battery life got a lot better with the new Franco kernel but the USB-debugging is just gone. I was wondering if maybe one of the recovery developers could help here. The USB brick solution for the HTC Desire was via Cyanogenmod. But I don't think that they know the solution since it isn't a very common problem as it seems...
Click to expand...
Click to collapse
Tap Build Number in about phone 10 times.
zephiK said:
Tap Build Number in about phone 10 times.
Click to expand...
Click to collapse
Thanks, but I already did that when I rooted my N4. Turning USB debugging on and off and on again didn't help.
Ultraschorsch said:
Thanks, but I already did that when I rooted my N4. Turning USB debugging on and off and on again didn't help.
Click to expand...
Click to collapse
Yea...computer doesn't even recognize nexus under recovery or fastboot menus..I think it's really fooked up. Just submitted a rma request to lg so will see how this plays out.
I have the same problem. Did the rma work out? I am wondering about doing that too and how to go back to stock without usb working...
studjuice said:
I have the same problem. Did the rma work out? I am wondering about doing that too and how to go back to stock without usb working...
Click to expand...
Click to collapse
I have teh same problem.
1) the battery drains like crazy, even with franco kernel lastest nightly
2) USB debugging does not work now... when plugging into the pc the phone is just not found...
3) I can reboot to recovery but that doesnt do me any good since I cant do jack from it.
anyone has any insight ? what can be going on that the phone is not showing up in windows
studjuice said:
I have the same problem. Did the rma work out? I am wondering about doing that too and how to go back to stock without usb working...
Click to expand...
Click to collapse
return to stock with a bad USB n4
http://forum.xda-developers.com/showthread.php?p=36046198
Sent from my Nexus 4
spaceman860 said:
return to stock with a bad USB n4
http://forum.xda-developers.com/showthread.php?p=36046198
Sent from my Nexus 4
Click to expand...
Click to collapse
even if you return it to Stock, you still cannot connect to USB...
what to do ? call google and ask for an RMA?
al3b3d3v said:
even if you return it to Stock, you still cannot connect to USB...
what to do ? call google and ask for an RMA?
Click to expand...
Click to collapse
Yes. If your on stock with a locked bootloader your warranty is still good
Sent from my Nexus 4
al3b3d3v said:
even if you return it to Stock, you still cannot connect to USB...
what to do ? call google and ask for an RMA?
Click to expand...
Click to collapse
Yes, I called Google but they don't have any N4's in stock. so I keep rooted until I get a new device from them.
Hi,
The usb connection of my Nexus 4 suddenly stopped working.
On my pc, or even on different ones, device is not recognized: when plugged in the built-in usb ports the device does not even appear on windows device manager, while on a powered hub (the one inside my lcd display) it appears as an "Unknown device".
The hardware id itself is shown as "USB/UNKNOWN", in this case.
This happens both when the Nexus is in normal mode, or in recovery mode.
In Fastboot mode the phone does not show at all in device list, wherever I plug it in.
I tried to remove /reinstall all the drivers, rebooting both pc and phone, using different cables.
The phone, btw, charges correctly, even when plugged in the built-in ports and works perfectly
I'm on stock 4.2.2 unlocked, rooted + franco kernel M3.
I tried to revert to stock firmware, stock kernel, tried to do a factory reset, with no success.
What can I try more before a RMA?
EDIT: I solved it!!!
This is what I have done, so far: Downloaded 4.3 odexed/rooted update zip from development section, radio and bootloader (link), and applied the update via twrp.
Rebooted, the update was successful, but usb was still no-go.
Rebooted a couple of time after restoring apps using Titanium, still no usb.
So I just switched off my phone, connected to the charger (not the original one, a normal, bulk, 2€ usb charger), and left the phone there for 10 minutes or so.
Then I switched it on, unplugged from charger, plugged to usb and BANG usb and adb are now working.
It looks to me like some setting of the usb status (maybe fast charge???) where messing up the connection.
I tested the phone with every single port on my pc, and now it just works.
Still, I did not update the bootloader, I believe I'll do this later, but it should have no side effect at all.
What cable are you using and have you tried changing MTP to PTP in the Computer USB Settings on the Storage settings in the Settings on your device?
If that does not help then you will have to try an other USB cable.
Sent from my Nexus 4 using Tapatalk 4 Beta
andyabc said:
What cable are you using and have you tried changing MTP to PTP in the Computer USB Settings on the Storage settings in the Settings on your device?
If that does not help then you will have to try an other USB cable.
Sent from my Nexus 4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I tried 3 different cables (Samsung, bulk and Nokia), and switched from MTP to PTP several times.
captive said:
I tried 3 different cables (Samsung, bulk and Nokia), and switched from MTP to PTP several times.
Click to expand...
Click to collapse
What where you doing at the time the issue occurred?
Sent from my Nexus 4 using Tapatalk 4 Beta
andyabc said:
What where you doing at the time the issue occurred?
Sent from my Nexus 4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Nothing. It worked until Friday, I believe.
Then I decided to switch to 4.3, downloaded the update zip from xda to my pc, and when I connected the Nexus in order to put the zip on its storage, it wasn't working anymore.
No hits, no bumps, nothing.
from what you said it seems that you have tried everything possible pc-side, except trying the same things on another os (you should if you have a secondary system)
IMO, something is broken in the phone's usb port, maybe the data pin is screwed up and it wont let your pc recognize the phone, but i'm no expert with circuits
SuicideFlasher said:
from what you said it seems that you have tried everything possible pc-side, except trying the same things on another os (you should if you have a secondary system)
IMO, something is broken in the phone's usb port, maybe the data pin is screwed up and it wont let your pc recognize the phone, but i'm no expert with circuits
Click to expand...
Click to collapse
That's what I suspected too, I just was trying to check everything to be sure the problem is hardware related
SuicideFlasher said:
from what you said it seems that you have tried everything possible pc-side, except trying the same things on another os (you should if you have a secondary system)
IMO, something is broken in the phone's usb port, maybe the data pin is screwed up and it wont let your pc recognize the phone, but i'm no expert with circuits
Click to expand...
Click to collapse
Exactly what I was thinking.
Sent from my Nexus 4 using Tapatalk 4 Beta
---------- Post added at 01:10 PM ---------- Previous post was at 01:09 PM ----------
captive said:
Nothing. It worked until Friday, I believe.
Then I decided to switch to 4.3, downloaded the update zip from xda to my pc, and when I connected the Nexus in order to put the zip on its storage, it wasn't working anymore.
No hits, no bumps, nothing.
Click to expand...
Click to collapse
Try connecting your device to an other computer.
Sent from my Nexus 4 using Tapatalk 4 Beta
andyabc said:
Try connecting your device to an other computer.
Sent from my Nexus 4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Tried this one too. I believe it's hardware-related. Damn.
captive said:
Tried this one too. I believe it's hardware-related. Damn.
Click to expand...
Click to collapse
You may want to play around and have a look at the female Slimport micro USB port.
Sent from my Nexus 4 using Tapatalk 4 Beta
andyabc said:
You may want to play around and have a look at the female Slimport micro USB port.
Sent from my Nexus 4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Ok, just to let you know, I solved it.
Don't really know how, but I did.
This is what I have done, so far: Downloaded 4.3 odexed/rooted update zip from development section, radio and bootloader (link), and applied the update via twrp.
Rebooted, the update was successful, but usb was still no-go.
Rebooted a couple of time after restoring apps using Titanium, still no usb.
So I just switched off my phone, connected to the charger (not the original one, a normal, bulk, 2€ usb charger), and left the phone there for 10 minutes or so.
Then I switched it on, unplugged from charger, plugged to usb and BANG usb and adb are now working.
It looks to me like some setting of the usb status (maybe fast charge???) where messing up the connection.
I tested the phone with every single port on my pc, and now it just works.
Still, I did not update the bootloader, I believe I'll do this later, but it should have no side effect at all.
captive said:
Ok, just to let you know, I solved it.
Don't really know how, but I did.
This is what I have done, so far: Downloaded 4.3 odexed/rooted update zip from development section, radio and bootloader (link), and applied the update via twrp.
Rebooted, the update was successful, but usb was still no-go.
Rebooted a couple of time after restoring apps using Titanium, still no usb.
So I just switched off my phone, connected to the charger (not the original one, a normal, bulk, 2€ usb charger), and left the phone there for 10 minutes or so.
Then I switched it on, unplugged from charger, plugged to usb and BANG usb and adb are now working.
It looks to me like some setting of the usb status (maybe fast charge???) where messing up the connection.
I tested the phone with every single port on my pc, and now it just works.
Still, I did not update the bootloader, I believe I'll do this later, but it should have no side effect at all.
Click to expand...
Click to collapse
Yeah, it could be possible that the device triggered Fast Charge but the kernel does not support it which could be causing the issue.
Sent from my Nexus 4 using Tapatalk 4 Beta
Got this strange problem. Every time when I connect G4 with my Win7 PC via USB, the "Moto G(4)" icon shows up but it is empty under it. I will have to go to the Developer options to click on MTP again (even it is already set to MTP) to show the internal storage. This is really annoying extra step. Anyone knows what is the problem and how to fix it? Thanks.
[Update] Finally got it worked by following this thread:
http://forum.xda-developers.com/xposed/modules/mod-usb-marshmallow-1-0-t3272072
myasus said:
Got this strange problem. Every time when I connect G4 with my Win7 PC via USB, the "Moto G(4)" icon shows up but it is empty under it. I will have to go to the Developer options to click on MTP again (even it is already set to MTP) to show the internal storage. This is really annoying extra step. Anyone knows what is the problem and how to fix it? Thanks.
Click to expand...
Click to collapse
That setting in the developer options doesn't do anything. Every time you plug it in, it will default to charging and you have to click MTP in the notification. It was that way in the G3 also.
Tel864 said:
That setting in the developer options doesn't do anything. Every time you plug it in, it will default to charging and you have to click MTP in the notification. It was that way in the G3 also.
Click to expand...
Click to collapse
This is really annoying. Is there anyway to change it defaulted to MTP?
myasus said:
This is really annoying. Is there anyway to change it defaulted to MTP?
Click to expand...
Click to collapse
Not that I know of. I've done it so often on the G3 and now the G4 that it's habit.
Tel864 said:
Not that I know of. I've done it so often on the G3 and now the G4 that it's habit.
Click to expand...
Click to collapse
Finally got it worked by following this thread:
http://forum.xda-developers.com/xposed/modules/mod-usb-marshmallow-1-0-t3272072
myasus said:
Finally got it worked by following this thread:
http://forum.xda-developers.com/xposed/modules/mod-usb-marshmallow-1-0-t3272072
Click to expand...
Click to collapse
OK, I didn't know you were rooted.
It is a new security feature of Android since lolipop. It is to prevent malware on your pc targeting android connected phones. So that if you were charging it couldn't switch to connect storage without explicit approval on the phone itself.
Redmi Note 7 International ROM, 64 bit 48Mpx 32GB 3GB Updated to android 10 QKQ1.190910.002 Miui Global 12.0.1 stable 12.0.1.0(QFGMIXM)
Hi all, there are for and against why USB debugging should be enabled or disabled by default - instead of having to find the option in Developer Options and enabling it there, Google should have made it available in ADB with a password and security question - but they did not do that, and here we are.
Now, I keep the USB debugging enabled on my phone just in case I can't access it other way than ADB(Ilive in the province in the Philippines and not many PRO phone shops here, the local ones can do some things but not recover a phone when USB debugging is OFF) - The problem I'm facing now, is that the build-in Security App(the one you can't disable or customize), disables USB debugging every time it Optimize. It's very annoying.
Do anyone have a solution for this?
Jan
Only solution I can think of is not to use the Security app. It's really annoying that USB debugging gets turned off and you loose Developer options and have to tap it back again. Anybody knows why the Security app can't be removed or just frozen?
svendsvin said:
Only solution I can think of is not to use the Security app. It's really annoying that USB debugging gets turned off and you loose Developer options and have to tap it back again. Anybody knows why the Security app can't be removed or just frozen?
Click to expand...
Click to collapse
Hi Svendsvin, do NOT under any circumstances remove the Security APP, it will send your phone into endless bootloop. I wouldn't try freezing either, since that might do it too.
Seems like Xiaomi just have to fix the app so that this exception can be added(most likely never going to happen, but we can hope and request it in their forum).
with kind regards
Jan
EDIT: link to my post in Xiaomi forum https://c.mi.com/forum.php?mod=viewthread&tid=3548581&page=1&extra=#pid18566423
I tried to freeze it but nothing happened. It just wasn't possible.
svendsvin said:
I tried to freeze it but nothing happened. It just wasn't possible.
Click to expand...
Click to collapse
Well there have been many reports on the net of bootloop when trying to freeze the system app, I guess you were lucky.