[GT-I9515] [BRICK] Help with Samsung Galaxy S4 Value Edition Full Brick - Galaxy S 4 Q&A, Help & Troubleshooting

Hi Guys!
I'm new to XDA developers, but I've been following this forum for many years.
I would like to resurrect my old phone, a Samsung Galaxy S4 Value Edition (GT-I9515), witch is most likely bricked.
About one year ago, the device started to randomly reboot, until it no longer powered on (It was NOT rooted or modded).
Recovery also did not work, so I decided to flash the stock firmware with Odin. The flash failed, so i decided to follow a (really stupid ) guide that said that to solve it was necessary to flash a PIT file of the Samsung GT-I9505, so I tried it.
Since then, I'm not able to boot the phone anymore.
What can I do with the phone now? What have I tried? I'll try to be as clear as possible:
Recovery mode:
I can boot into recovery only by pressing VOL UP + POWER with phone connected to charger, and then inserting battery keeping pressed the buttons, but when I try to boot into Recovery Mode, 3 different things can happen:
It does not power on
It vibrates, then reboot and freeze in Samsung GT-I9515 logo
It vibrates randomly and then open successfully the stock recovery
Download mode:
I can boot into download only by pressing VOL DOWN + POWER with phone connected to charger, and then inserting battery keeping pressed the buttons, but when I try to boot into Download Mode, it seems that the screen freeze at a certain point while loading the recovery mode warning (this warning loads slowly, like a slide from top to bottom). The device rarely fully load the warning, and when it does, when I press the VOL UP key to confirm entering download mode (sometimes it does not respond to VOL UP click for confirmation and i must reboot) Odin is able to find the device but during a flash the Odin log stop at Setup Connection, so the device is not responding.
Normal boot:
Yesterday, after hundreds of attempts, I was able to start the phone normally (I don't know how) , it asked for the initial configuration and language, but when I turned it off, the problem reappeared and I was not able to boot it normally. In most cases, the device freezes in Samsung GT-I9515 logo, it continues to restart or simply does not vibrate or power on.
When charging, I don't see anything such as the charging battery icon or the LED.
I realize that I was wrong to flash that PIT file, but is there anything I can do to make this device work properly?
Thank you in advance for your cooperation.

Noone?

Related

[Q] LG G2 stuck for no apparent reason

Ok, so I installed the LG G Pro 2 ROM, had it rooted and ofc had stock recovery ... My Wi-Fi (for some odd reason) didn't want to turn itself on, so i tried to restart the phone .... It got stuck in a bootloop, so I'm having following problems ... I entered stock recovery and tried to wipe the rom, no help, still stuck in recovery .... Can't access download mode to flash a KDZ file, since I cant really "shut" the phone down, rather just "restart" it by long pressing the power key, and if i try to hold the vol up button while connecting it to the computer to enter download mode, it fails every time and it just goes to the LG logo and get's stuck there .... Can I somehow shut the phone down completly or flash a kdz file from stock recovery ?
Edit: OK, I somehow did shut it down completly ... I think i held all 3 buttons at the same time for like, 10 - 15 secs and it did shut down completly ...
So - sorry for the thread, mods can lock it!
Doomhamma said:
Ok, so I installed the LG G Pro 2 ROM, had it rooted and ofc had stock recovery ... My Wi-Fi (for some odd reason) didn't want to turn itself on, so i tried to restart the phone .... It got stuck in a bootloop, so I'm having following problems ... I entered stock recovery and tried to wipe the rom, no help, still stuck in recovery .... Can't access download mode to flash a KDZ file, since I cant really "shut" the phone down, rather just "restart" it by long pressing the power key, and if i try to hold the vol up button while connecting it to the computer to enter download mode, it fails every time and it just goes to the LG logo and get's stuck there .... Can I somehow shut the phone down completly or flash a kdz file from stock recovery ?
Edit: OK, I somehow did shut it down completly ... I think i held all 3 buttons at the same time for like, 10 - 15 secs and it did shut down completly ...
So - sorry for the thread, mods can lock it!
Click to expand...
Click to collapse
download mode. try holding power button down for 20+ seconds. now hold volume up button while plugging in usb cable.

Soft bricked my T280 and so confused!!

I recently updated my Samsung Galaxy Tab A T280 to the latest firmware and I lost my root. So this afternoon I re-rooted it. Or I attempted to, anyway. Everything seemingly went fine, and I booted into TWRP just fine. I went to flash the ROM and I also selected wipe cache/davlik cache to be done as well, and tapped reboot. My device then turned off and when it started the reboot, it got stuck on the Samsung Galaxy Tab A logo screen and would not move or power off by holding the power button (I tried for a LONG time by using a rubber band to hold it down so I didn't have to, with no luck), and every other combination of buttons wouldn't do a thing, except for holding power + vol down, which made it turn off and back on, but it wouldn't finish rebooting and it just got stuck at the Samsung Galaxy Tab A logo again. So then I thought that maybe plugging it into a charger might not be a bad idea, and after holding down power + vol down again, it turned off and turned on and showed a battery with a charging symbol. I've had it plugged in for an hour and it does not show a charge or do anything except for go back to that boot logo if I unplug it from the charger and again hold down power and volume down separately.
I know it's not hard bricked because it is somewhat responsive so I think there's a chance to fix it, hopefully. I just want it to turn on and fully reboot into anything or in any way that will allow me to be able to fix the issue. My computer will not recognize the device so ADB is not an option right now unless I'm wrong.
Thanks a lot guys, I am so confused and could really use some advice.
What firmware did you install
Try to install original firmware via software "Samsung Smart Switch" on your PC with connected tablet.
I too recommend that you try installing the last firmware that you were on via Odin. Also, when you hit that screen lock issue after a firmware flash, where only the Samsung logo appears do this:
1. press and hold Home + volume up and volume down along with power button (that's all 4 buttons). Hold it there for at least 20 seconds and it should power off.
2. Once the device powers off keep holding the buttons but let go of the volume down button.
3. Once the tablet starts to power back up again release the power button and then in about 1 to 2 second release the rest of the buttons.
This should get you back into recovery. You should at least be able to restore any backup, that you should have already, on your external micro SD.
Good luck.. : )
"Chance Favors the Prepared"
the above post is 100% right. Reboot back into recovery and you'll be good to go. Also twrp has a option to reboot back to recovery so this doesn't happen, just a fyi for future knowledge. Best of luck..
You tried to flash a rom with twrp?
You need to flash stock firmware with odin.

HELP! S8 won't boot after updating TWRP

I updated TWRP to 3.1.1.2 inside TWRP. The issue I encounter now is that my S8 stucks on the very first booting screen. You know the very first screen where it stated "Samsung Galaxy S8" and down below "powered by android".
I can't do anything. It's just like the phone has frozen at that state. Nothing works anymore. Even If I try to turn it off by pressing Volume down + Bixby + power button, it just restart and get stucks at the boot screen again and again. There's NO boot loop.
I'm on europe version of the Galaxy S8
stock rom and rooted (Magisk)
Got TWRP installed but after updating TWRP the phone freeze at the very first booting screen.
Any help would be appreciated!
Thanks for your efforts!
First of all - make sure you have the correct TWRP for your device. I know for myself that by searching google I got the S8+ twrp at first and flashed it by mistake without noticing.
Then try this-
Connect your device to a power socket (pc or wall, doesn't matter)
When you are on the very first screen, turn off the device by pressing Power + Volume down. Your device will shut down and you will see the charging animation.
Once you see it, disconnect the device from the USB and try one of the following:
Power + Volume up + Bixby for recovery mode
or
Power +Volume down + Bixby for download mode
I think the download mode will work, then just flash a stock rom or the correct recovery and try again
I failed right at the second step. Once I connect my S8 to power socket and tried to turn of the device by pressing Volume down + Power, the device turnt off for about 2 seconds and then reboot again to the very first screen. Even if my S8 is on power socket, I do not see the charging animation. So that is why I cannot continue with step 3.
Any Ideas buddy?
EDIT:
I got it enter the download mode
I downloaded the TWRP img from here https://eu.dl.twrp.me/dreamlte/
After enter the download mode, I flash TWRP via odin. It passed via Odin but my S8 doesn't enter TWRP but instead stuck at the very first boot screen.
Any ideas, buddy?
EDIT:
I've solved it myself. Thanks for your efforts!
I got the exact same problem but how did u do it please help me
Hi I just got the exact same problem as you but I cannot get how I would fix it please help???
Edit: I got it to download mode but I do nut understand how I would flash it
The only way around this I found was to Odin back to stock https://forum.xda-developers.com/galaxy-s8+/development/rom-galaxy-s8-t3749444
Then follow the instructions to reinstall twrp using odin https://forum.xda-developers.com/ga...-s8-exynos-t3847712/post77735501#post77735501

A20e stuck in download mode

Hi,
I have a new a20e (a202f) out of the box.
I followed another guide to root and install twrp which turns out was wrong. I unlocked the bootloader just fine.
I have no backup, no personal boot.img or anything.
Essentially I am stuck in download mode and restarting takes me straight back to download mode.
Recovery: Error validating footer.
SW REV. CHECK FAIL (BOOTLOADER) DEVICE"
Cheers guys
What guide did you follow? You have to download your stock fw from sites like sammobile then from there you can have the boot.img and etc. Have you tried flashing stock fw using odin?
Note: Usually you flash vbmeta for footer error when you flash twrp.
Deluriane said:
What guide did you follow? Have you tried flashing stock fw using odin?
Note: Usually you flash vbmeta for footer error when you flash twrp.
Click to expand...
Click to collapse
It was a guide on 'unofficialtwrp.com' - I can't link things here yet.
I have since tar'ed an unpatched twrp (TWRP-3.3.1.0_A20_by_Agrim720.img) + vbmeta.img + boot.img (from https://forum.xda-developers.com/galaxy-a20/help/boo-img-a205fxxu2asfb-t4008739), then I flashed through AP on Odin and now I think it boots past the download mode but instead it now has fuzzy dark red screen with nothing legible.
Oh bugger, I've been a class A plum.
Can I get out of this horrible mess?
craigywaigy said:
It was a guide on 'unofficialtwrp.com' - I can't link things here yet.
I have since tar'ed an unpatched twrp (TWRP-3.3.1.0_A20_by_Agrim720.img) + vbmeta.img + boot.img (from https://forum.xda-developers.com/galaxy-a20/help/boo-img-a205fxxu2asfb-t4008739), then I flashed through AP on Odin and now I think it boots past the download mode but instead it now has fuzzy dark red screen with nothing legible.
Oh bugger, I've been a class A plum.
Can I get out of this horrible mess?
Click to expand...
Click to collapse
Well you have to use your own boot.img from your fw, not all of use the same fw that's why, some are still on u2, u3 and u4. Maybe the boot.img you got isnt the same as your fw.
Well you can start from scratch and reflash your stock fw in odin.
https://www.sammobile.com/firmwares/
Deluriane said:
Well you have to use your own boot.img from your fw, not all of use the same fw that's why, some are still on u2, u3 and u4. Maybe the boot.img you got isnt the same as your fw.
Well you can start from scratch and reflash your stock fw in odin.
Click to expand...
Click to collapse
Yep, but now I can not get back to download mode. Any pointers?
craigywaigy said:
Yep, but now I can not get back to download mode. Any pointers?
Click to expand...
Click to collapse
Try holding volume - and power and your phone will turn off, as soon as it turns off press volume + & - and plug your usb cable that is connected to a computer.
No luck with that. It displays the message about running custom os etc and to press power to continue. So I press it and it boots to the messed up red/pink/black display.
craigywaigy said:
No luck with that. It displays the message about running custom os etc and to press power to continue. So I press it and it boots to the messed up red/pink/black display.
Click to expand...
Click to collapse
Do you mean like the one attached? If yes you havent booted to download mode.
Try booting to recovery by holding volume + and power while you turn on the phone.
There is a option there to boot to download mode.
Deluriane said:
Do you mean like the one attached? If yes you havent booted to download mode.
Try booting to recovery by holding volume + and power while you turn on the phone.
There is a option there to boot to download mode.
Click to expand...
Click to collapse
Yes that screen. I've tried your suggestion with volume + but that also ends up with messed up screen
Yes so currently I'm unable to get to recovery (not sure it even flashed properly), unable to get to download mode, or to get the device recognised in odin.
I'm unable to power off. The screen is blank and when I press power it flickers shortly with some black/white/red pink colours around the edges, but the screen quickly turns blank.
From this position I can only restart by holding volume - and power.
This boots to the samsung logo and then the 'bootloader unlocked' warning. No amount of button configs have proved successful so far, and then I end up back at the blank screen.
I'm happy to start from scratch. I have downloaded the stock firmware but I'm simply unable to proceed.
Aslo the device is not recognised in windows at any point.
Thanks guys
craigywaigy said:
Yes so currently I'm unable to get to recovery (not sure it even flashed properly), unable to get to download mode, or to get the device recognised in odin.
I'm unable to power off. The screen is blank and when I press power it flickers shortly with some black/white/red pink colours around the edges, but the screen quickly turns blank.
From this position I can only restart by holding volume - and power.
This boots to the samsung logo and then the 'bootloader unlocked' warning. No amount of button configs have proved successful so far, and then I end up back at the blank screen.
I'm happy to start from scratch. I have downloaded the stock firmware but I'm simply unable to proceed.
Aslo the device is not recognised in windows at any point.
Thanks guys
Click to expand...
Click to collapse
Are you sure you pressed and hold volume +&- and plugging cable before the samsung logo pops up? You have to do it quickly right after the device turns off. You shoudn't see the bootloader warning if you done this quickly and correctly.
craigywaigy said:
Yes so currently I'm unable to get to recovery (not sure it even flashed properly), unable to get to download mode, or to get the device recognised in odin.
I'm unable to power off. The screen is blank and when I press power it flickers shortly with some black/white/red pink colours around the edges, but the screen quickly turns blank.
From this position I can only restart by holding volume - and power.
This boots to the samsung logo and then the 'bootloader unlocked' warning. No amount of button configs have proved successful so far, and then I end up back at the blank screen.
I'm happy to start from scratch. I have downloaded the stock firmware but I'm simply unable to proceed.
Aslo the device is not recognised in windows at any point.
Thanks guys
Click to expand...
Click to collapse
Hello -
Please trust me when I tell you that it can be fixed. I had the EXACT same problem and drove me crazy for 24 hours. You can deffinetly fix your phone once you get to download mode.
I had the same issue where I could not turn the phone OFF it just looped back and I pushed buttons for hours to no avail... Then some one told me it WILL WORK, it is just the timing of
the button pushing, AND the USB cable plug in. Sure enough he was right. It took me alot of tries and I even took my phone apart and un plugged the battery so I could controll the power
ON / OFF better and time the button's easier. Here is what I did ...
unplug battery so phone was 100% OFF.
Plug in battery ( phone is still OFF )
Hold Vol - then Hold Power and Vol -
As soon as the power started IMEDITALY PLUG IN USB ( have USB READY to be plugged in FAST )
DONT let go of buttons ... screen will flash quickly and then Imediatly let go of power keep holding Vol -
IF you timed this right, IT WILL proced to download mode. If not, then start over again from power OFF ( step 01 )
It took me 3 tries to get it ( after 50+ tries before ) lol
Now I am not sure about the battery unplugging ... maybe you dont need to, but it mad it work for me as I could control the power ON part of this now.
Getting to your battery is not very hard and there is a you tube video on how to do it... if you need help just PM ME.
Good luck friend.
When this happened to me all I did was hold volume up and volume down. Kept cord connected to computer. Connected to device during the bootloop and boom within seconds I was in download mode. It catches it once screen goes off in between the bootloop.
Sent from my SM-N950U using Tapatalk
Thanks you guys. In the end the battery died and then I could power up whilst holding vol+, straight to recovery and then I could flash stock rom.
Much appreciation for your help guys, it got me out of a pinch - it is my mother-in-law's new phone!
craigywaigy said:
Hi,
I have a new a20e (a202f) out of the box.
I followed another guide to root and install twrp which turns out was wrong. I unlocked the bootloader just fine.
I have no backup, no personal boot.img or anything.
Essentially I am stuck in download mode and restarting takes me straight back to download mode.
Recovery: Error validating footer.
SW REV. CHECK FAIL (BOOTLOADER) DEVICE"
Cheers guys
Click to expand...
Click to collapse
can you help me i have the same problem idk how to fix it help

Galaxy A40 infinite loop - impossible to turn on

Hi!
I have a problem with a galaxy a40 device, I flashed a stock ROM with Odin, everything went fine, green lights, PASS and all, but now the device just won't go pass the SM logo anymore. When I turn on, logo appears 2-3 secs I get a warning of the unlocked BL then logo comes back and after a second the phone restarts itself and the same goes on forever ( well about several hours, and after that it just shuts off somehow ). I cannot enter recovery mode or download mode at all. I keep pressing the combinations Power + Vol Down, Power + Vol Up, All three and every combinations I have just found on the internet so far. Odin doesnt recognize the phone, which is not a surprise since it won't start up. I have tried with adb but waiting for device is all I get.
How is it even possible that I cannot enter download mode at all? There was no problem with the physical keys, and the power still works, I cannot test the Vol buttons tho.
Has anyone ever had a problem like this? How can I come back from this? Is there a way to flash a ROM without download mode or turned off phone?
Thanks for any help!!
The download mode for this model is different from previous Samsung's :
IIRC, with the phone off, you need to hold VolumeUp and VolumeDown, then plug in the USB cable connected to a computer (you may need to press Power to power up the phone, I can't recall properly).
From there, you should be able to restore a stock ROM with Odin.
Let us know if it helped !
gmarko247 said:
Hi!
I have a problem with a galaxy a40 device, I flashed a stock ROM with Odin, everything went fine, green lights, PASS and all, but now the device just won't go pass the SM logo anymore. When I turn on, logo appears 2-3 secs I get a warning of the unlocked BL then logo comes back and after a second the phone restarts itself and the same goes on forever ( well about several hours, and after that it just shuts off somehow ). I cannot enter recovery mode or download mode at all. I keep pressing the combinations Power + Vol Down, Power + Vol Up, All three and every combinations I have just found on the internet so far. Odin doesnt recognize the phone, which is not a surprise since it won't start up. I have tried with adb but waiting for device is all I get.
How is it even possible that I cannot enter download mode at all? There was no problem with the physical keys, and the power still works, I cannot test the Vol buttons tho.
Has anyone ever had a problem like this? How can I come back from this? Is there a way to flash a ROM without download mode or turned off phone?
Thanks for any help!!
Click to expand...
Click to collapse
Here the same problem, have a40 in loop and never get rocgnized for computer, tryed many different cables, and installed a booring large amount of drivers software and nothing...
you need to power off device completely. let battery drain if you can't shut down. press and keep holding volume down + plug in usb cable for Odin3 (I doubt both?)
aIecxs said:
you need to power off device completely. let battery drain if you can't shut down. press and keep holding volume down + plug in usb cable for Odin3 (I doubt both?)
Click to expand...
Click to collapse
Generic answers, repeated 800 times why really need to waste a post with that? and that not was the problem:
1- For no usb recognition, is this phone bad design, in the back tap where is the battery in the samsung logo more or less if you push with fingers and charge is because the design of baterry is so crap and your usb port goes off when the under tap cable moves or just get little out of conection. If you can get working after push, usb on phone will do too.

Categories

Resources