Database Users

Nexus 10 does not boot after Update

After attempt at installing software update to Nexus 10 tablet will not boot. Have wiped Cache and even then did a factory reset. Nothing. Google appears and then twirling colorful dots and nothing. For hours just twirling dots., Samsung and Google and Best Buy geeks says nothing they can do. No longer under warranty but very upset since tablet was working great until update. I am not very tech savvy but can anyone help or do I just have a new paperweight? Thanks for any advice.
I have not made any modifications to the tablet.

Just flash the newest factory image. Get it and the instructions to flash it from here:
https://developers.google.com/android/nexus/images

yes flash the newest image

After getting a notification of the latest update I went and rebooted for the update to install but it went to the twrp recovery and nothing happens, is there a way to install the update?

VivaErBetis said:
Just flash the newest factory image. Get it and the instructions to flash it from here:
https://developers.google.com/android/nexus/images
Click to expand...
Click to collapse
Gibbothegreat said:
After getting a notification of the latest update I went and rebooted for the update to install but it went to the twrp recovery and nothing happens, is there a way to install the update?
Click to expand...
Click to collapse
Still having proble? what is your recovery ? stock? did you update the bootloader? depending on your answer I should be able to help you out, thx

Khaon said:
Still having proble? what is your recovery ? stock? did you update the bootloader? depending on your answer I should be able to help you out, thx
Click to expand...
Click to collapse
Hi Khaon, I have stock lollipop version 5.1.1 . (LMY47V) and latest twrp version. When upgrading it restarts and goes to recoverys main screen.
BTW how can I check which version my bootloader is?

same problem
VivaErBetis said:
Just flash the newest factory image. Get it and the instructions to flash it from here:
as a newbie .I'm not allowed to reference your link !!
I rooted my nexus 10 using xda instructions., installed CWM. All good. I tried backup and recovery and screwed something up in recovery. Got stuck in recovery mode reboot loop. Many gyrations, no fix, so I tried factory reset. Still no fix.
I decided to install a new version of the OS using the Mantaray tar you reference above. UBS connecting and fastboot. All messages look good. Now I have the problem reported in this thread. Stuck with flying balls and no boot. Very interested in any suggestions you may have.
Click to expand...
Click to collapse

Gibbothegreat said:
Hi Khaon, I have stock lollipop version 5.1.1 . (LMY47V) and latest twrp version. When upgrading it restarts and goes to recoverys main screen.
BTW how can I check which version my bootloader is?
Click to expand...
Click to collapse
So you keep just boot looping into twrp, right ?
Did you try installing a custom ROM through adb or just connecting your device?
If it keeps boot looping you gotta to wipe the full storage.

Khaon said:
So you keep just boot looping into twrp, right ?
Did you try installing a custom ROM through adb or just connecting your device?
If it keeps boot looping you gotta to wipe the full storage.
Click to expand...
Click to collapse
No, on a normal reboot or a shutdown/restart it's fine no problems there but when I try to install the update via system update it reboots into twrp. I attach a pic of my system.

Gibbothegreat said:
No, on a normal reboot or a shutdown/restart it's fine no problems there but when I try to install the update via system update it reboots into twrp. I attach a pic of my system.
Click to expand...
Click to collapse
Oh I see, well, you should just flash a custom ROM or if you want to stay with official factory images, you should just follow instruction there:
https://developers.google.com/android/nexus/images
What you do need is just have fastboot executable once you are into the bootloader.
You can easily access the bootloader from twrp : shutdown > reboot into booatloader

Cool thx for your continued help :good:

The problem is due to your attempting an OTA update with a custom recovery (TWRP). You can only do OTA with stock recovery. Once you are in this situation, your easiest way out of it is to simply apply the latest factory image using "fastboot", but this will also wipe your user data so backup any photos, music, etc. before you start. You will also have to reload programs from Playstore once the new image is installed.

Wrongly installed TWRP 3.0. 2-0

I was running on an older version of TWRP. Also I had uprooted my phone recently due to battery heating and media server issue. I flashed the new zip file but did not clear cache after flashing instead directly booted into system. System boots perfectly but cannot load recovery as it gets stuck on splash screen( Lenovo logo). Please do help me.

Flash it back to older twrp version using fastboot.

Guys, hi
There is one more new problem. I tried to update the OTA update but got stuck at boot screen. It's not responding after the Lenovo logo. I think the issue is not having any recovery(custom nor stock). How to fix this issue? Please help me to
# Reset stock recovery or TWRP 3.0.2-0
# Update the OTA update( I badly want this as I saw that Resurrection Remix requires the device to presently run on stock Lollipop to update. I soo badly want to use CM13

Iamjomy said:
I was running on an older version of TWRP. Also I had uprooted my phone recently due to battery heating and media server issue. I flashed the new zip file but did not clear cache after flashing instead directly booted into system. System boots perfectly but cannot load recovery as it gets stuck on splash screen( Lenovo logo). Please do help me.
Click to expand...
Click to collapse
Use cwm ...its working 100% sure

ANDROiDCO said:
Flash it back to older twrp version using fastboot.
Click to expand...
Click to collapse
Thank you. But can you please tell how to do this via the flash boot. I haven't tried yet in a PC. I installed the older TWRP and now tried flashing the new version using my phone. Wouldn't I get stuck because none of the recoveries(custom and stock) are opening

can you boot into the system? if Yes then use rashr app and flash twrp's img file from the storage.. and reboot to recovery and u don't need to update to stock lollipop you can directly flash cm12.1 by ed300 and after booting into system once you can install any lollipop or marshmallow rom with the help of recovery. i advice you to not to do update as u r a root user.

varun4495 said:
can you boot into the system? if Yes then use rashr app and flash twrp's img file from the storage.. and reboot to recovery and u don't need to update to stock lollipop you can directly flash cm12.1 by ed300 and after booting into system once you can install any lollipop or marshmallow rom with the help of recovery. i advice you to not to do update as u r a root user.
Click to expand...
Click to collapse
Thank you bro. Yes I can boot into system. Actually I'm not root user anymore. I had heating issues with the battery earlier. After rooting media server started draining battery. So i uninstalled SuperSU.

Iamjomy said:
Thank you bro. Yes I can boot into system. Actually I'm not root user anymore. I had heating issues with the battery earlier. After rooting media server started draining battery. So i uninstalled SuperSU.
Click to expand...
Click to collapse
You first hv to root for the installation of recovery.. First root ur phone then install stock recovery.. Using flashify or rashr.

If you can boot into system, then you can use adb sideload to flash zips(recovery or rom).
For detailed info, google it or go to http://www.droidviews.com/sideload-roms-mods-using-adb-sideload/
If it doesn't work, root your phone and then install flashfire. Then use it to flash recovery.

varun4495 said:
You first hv to root for the installation of recovery.. First root ur phone then install stock recovery.. Using flashify or rashr.
Click to expand...
Click to collapse
Thanks bro. Is it bad to root using iRoot or KingRoot? Or should I do it using ADB?

@Iamjomy if you have pc then go for adb otherwise go for the latest version of kingoroot.. I rooted with kingroot.. No problem in that.. You can find that apk by searching on google.. !!

varun4495 said:
@Iamjomy if you have pc then go for adb otherwise go for the latest version of kingoroot.. I rooted with kingroot.. No problem in that.. You can find that apk by searching on google.. !!
Click to expand...
Click to collapse
Hello,
Thank you soo much. I flashed TWRP 2.8 using Flashify and it works. Actually I wanted to do a factory reset to solve "Unfortunately the process com.android.phone has stopped" issue. It wasn't allowing me to turn on my mobile data. I couldn't reset the phone too as a recovery was missing. Now the issue is fixed and I'm happy with it. Can I flash the TWRP 3.0.2-0 similarly using Flashify? Also please do suggest some good ROMS bro. Im still on the KitKat version( S040_150805)

Iamjomy said:
Hello,
Thank you soo much. I flashed TWRP 2.8 using Flashify and it works. Actually I wanted to do a factory reset to solve "Unfortunately the process com.android.phone has stopped" issue. It wasn't allowing me to turn on my mobile data. I couldn't reset the phone too as a recovery was missing. Now the issue is fixed and I'm happy with it. Can I flash the TWRP 3.0.2-0 similarly using Flashify? Also please do suggest some good ROMS bro. Im still on the KitKat version( S040_150805)
Click to expand...
Click to collapse
Recovery version are depended on the different andtoid versions.. 3.0.2 is for the LP and MM.. If u use custom roms then u can use that.. I dnt suggest you to use that as u r on the lollipop.. And the best roms are.. CM12.1, RR5.7.3, MOKEE, XOSP.. press thanks if i helped you. !!

New update to fix voLTE 911 bug...

So this morning I got an update to fix the voLTE bug. I'm unlocked with twrp installed and rooted. Just for the sake of experimenting I tried installing it. Well that didn't work. Just gets stuck in twrp recovery and you have to power the phone off completely to get it to boot. I guess my question (even though it's a little early) is there a way to install the update without reverting back to stock?
EDIT: Link to the zip
https://drive.google.com/open?id=0BxqNotAWlwLUQ1Fzcjc2YXd4QzA

I don't believe so.
In the past you either had to go back to stock or wait on someone to create a compatible update for rooted devices.

Can you post link to zip?
If you are rooted, you can find the zip in cache folder in recovery.

Can you add what variant and build you are using before the update? Also the build afterwards?

KapilFaujdar said:
Can you post link to zip?
If you are rooted, you can find the zip in cache folder in recovery.
Click to expand...
Click to collapse
I got the update, but all I see on my magisk rooted G5+ in /cache/recovery are log files and the fstab files. Anywhere else to look?

gghose said:
I got the update, but all I see on my magisk rooted G5+ in /cache/recovery are log files and the fstab files. Anywhere else to look?
Click to expand...
Click to collapse
Yeah I can't find anything in that folder either.

I received the update and applied it. I am not rooted.
I have the XT1687 model.
My current build number is NPN25.137-35

My device BL unlocked, TWRP installed and rooted with magisck.
I'm getting the update notification and splash screens several times daily.
Anyone rooted try installing the update with Flashfire app?

bvsbutthd101 said:
So this morning I got an update to fix the voLTE bug. I'm unlocked with twrp installed and rooted. Just for the sake of experimenting I tried installing it. Well that didn't work. Just gets stuck in twrp recovery and you have to power the phone off completely to get it to boot. I guess my question (even though it's a little early) is there a way to install the update without reverting back to stock?
Click to expand...
Click to collapse
If you have systemless supersu, you should just be able to apply the update after reverting to stock recovery.

So I found where the zip downloads. I wonder what flashing it in twrp would do?
EDIT: Here's the link to the zip and I've put it in the OP.
https://drive.google.com/open?id=0BxqNotAWlwLUQ1Fzcjc2YXd4QzA

glight0 said:
My device BL unlocked, TWRP installed and rooted with magisck.
I'm getting the update notification and splash screens several times daily.
Anyone rooted try installing the update with Flashfire app?
Click to expand...
Click to collapse
OK, so I tried flashing recovery.img from stock firmware build 33. But the OTA update will not install, instead I get an error after downloading and rebooting (red triangle at recovery mode).
So I tried fully reverting to stock firmware but I decided to skip over erasing userdata. Afterward the OTA downloaded and installed successfully. Keeping userdata does not seem to have caused an issue.
My problem now though is how to get root back without having to wipe userdata after re-flashing TWRP.
Or is this not possible and if I want to root I must first wipe userdata so that TWRP can read internal memory?

bvsbutthd101 said:
So I found where the zip downloads. I wonder what flashing it in twrp would do?
EDIT: Here's the link to the zip and I've put it in the OP.
https://drive.google.com/open?id=0BxqNotAWlwLUQ1Fzcjc2YXd4QzA
Click to expand...
Click to collapse
Just tried flashing it with TWRP and no luck:
Verifying current system....
E3002: Package expects build thumbprint of 7.0/NPN25.137-35/37:user/release-keys or 7.0/NPN25.137-33/35:user/release-keys; this device has .
Updated process ended with ERROR: 7
which doesn't make much sense since I rooted the stock ROM (Build number reads NPN25.137-33).

If your using a custom recovery flash the stock recovery, then go to the stock recovery and using your computer flash using adb sideboard command. I assume you already know how to do this. Hope that helps.
gghose said:
Just tried flashing it with TWRP and no luck:
Verifying current system....
E3002: Package expects build thumbprint of 7.0/NPN25.137-35/37:user/release-keys or 7.0/NPN25.137-33/35:user/release-keys; this device has .
Updated process ended with ERROR: 7
which doesn't make much sense since I rooted the stock ROM (Build number reads NPN25.137-33).
Click to expand...
Click to collapse

I'm stuck in the same boat... no idea how to flash the stock recovery and sideboard, what that even means, or if that would break root. I just followed the step-by-step "how to root" video when I first got the phone
There's a workaround to disable the "advanced LTE" or whatever it was called, so I did that. But in the meantime until a more "user friendly" means of updating is available, is there a way I can get rid of this nag screen? Way back on an earlier device (Samsung Charge?) I remember manually editing a "build.prop" file or something to match the latest version so I wouldn't keep getting the software update nag. Is there something that will do the same here, or is there a system app I can freeze in TiB?
My best guess is freezing "Moto Actions 03.022.1.4-N" because it's showing "(updated)" on the side.

rellim113 said:
I'm stuck in the same boat... no idea how to flash the stock recovery and sideboard, what that even means, or if that would break root. I just followed the step-by-step "how to root" video when I first got the phone .
Click to expand...
Click to collapse
What he means is you need to download the stock rom, unzip it, then boot phone to bootloader mode and connect to PC. Then flash the recovery.IMG from the stock rom folder with command prompt:
Fastboot flash recovery recovery.img
Then you can on the phone tell it to boot to recovery mode. This will be a screen with Android on his back and the words NO Command on the bottom. Then plug to PC and use adb command to sideload the update zip like this:
adb sideload [nameofupdatefile].Zip

glight0 said:
What he means is you need to download the stock rom, unzip it, then boot phone to bootloader mode and connect to PC. Then flash the recovery.IMG from the stock rom folder with command prompt:
Fastboot flash recovery recovery.img
Then you can on the phone tell it to boot to recovery mode. This will be a screen with Android on his back and the words NO Command on the bottom. Then plug to PC and use adb command to sideload the update zip like this:
adb sideload [nameofupdatefile].Zip
Click to expand...
Click to collapse
Strange, reflashed the stock recovery and adb can't see it (adb devices returns nothing). And when trying to install it via the normal OTA way, the stock recovery tries to install but ends with an error.

That's what happened to me when I tried reverting to stock recovery and then trying to install update from phone Settings app.
I ended up having to revert to stock rom to get ota to apply with settings app. But now I am trying to root again but after installing TWRP data is encrypted again. So looks like I will have to wipe data before re-rooting.

[Q] Bootloop after May security update

Hey everyone, I need some help.
I have Magisk installed, and wanted to preserve root acces throughout the update (may security patch, ~80MB). I used this guide to do it, uninstalled Magisk, installed it on 2nd slot during phase 2, rebooted: bootloop. Stuck in an endless cycle: the kernel loads, but always reboots during the andorid one boot animation.
I'm looking for a way to make it functional while not losing my data, or a way to copy my data to a PC before flashing.
What can I do now?
Thanks in advance.

Flash stock ROM
Flash stock ROM through the MI FLASH TOOL..... download old version ROM through the XDA site nd flash it through MI FLASH TOOL also u can watch process on YouTube ....

Indiangautam said:
Flash stock ROM through the MI FLASH TOOL..... download old version ROM through the XDA site nd flash it through MI FLASH TOOL also u can watch process on YouTube ....
Click to expand...
Click to collapse
Will this preserve or wipe my data? I'm looking for a way that'll preserve my data.

droidx8 said:
Will this preserve or wipe my data? I'm looking for a way that'll preserve my data.
Click to expand...
Click to collapse
According to me no way to recover your data....if you flash stock ROM then all data will be wipe.....

Indiangautam said:
According to me no way to recover your data....if you flash stock ROM then all data will be wipe.....
Click to expand...
Click to collapse
Well let's not do that then, there could be another way... Thanks anyway!

droidx8 said:
Well let's not do that then, there could be another way... Thanks anyway!
Click to expand...
Click to collapse
As you wish....but if want to try my process then definitely your phone will bootup

droidx8 said:
Well let's not do that then, there could be another way... Thanks anyway!
Click to expand...
Click to collapse
You can choose to not wipe your data.
It's the "flash all except storage.bat"
You can download the last firmware here
http://en.miui.com/getrom.php?r=333&m=yes&app=false
You must have fastboot on your PC windows or Linux
So if you have a Windows just search how to install fastboot on Windows there's some great one on xda
Unzip the firmware open the flash all except storage bat
Remove both lines that contains
-OEM unlock
-OEM lock
Otherwise your data will be wiped and as you use magisk you want an unlocked bootloader
Open a powershell windows where the .bat file is
Then type without the quotes
"./flash_all_except_storage.bat"
Flashing procedure will take a few minutes on system partition but don't freak out
Once it's done reboot you'll be on 9.5.11 ROM version
You'll receive a 60mb ota to have the last one which is 9.11.13
You can boot TWRP to flash magisk now
And on next update download the last firmware
9.5.13 should be on the first link I gave you (there is always a delay between ota that are just patch and a full firmware that contains all the files)
Flash the boot.img or just reflash the ROM like above apply ota and reflash magisk
I ended up in the same situation but I think it's a technical problem where magisk is not concern I will not go into details but anyway this method is safe
JUST NEVER FORGET TO REMOVE THE OEM LOCK AND UNLOCK LINES since may update this will factory reset phone
ALWAYS USE THE "flash_all_except_storage" file
If you have some more questions I'm there

Dead-neM said:
You can choose to not wipe your data.
It's the "flash all except storage.bat"
I ended up in the same situation but I think it's a technical problem where magisk is not concern I will not go into details but anyway this method is safe
JUST NEVER FORGET TO REMOVE THE OEM LOCK AND UNLOCK LINES since may update this will factory reset phone
ALWAYS USE THE "flash_all_except_storage" file
If you have some more questions I'm there
Click to expand...
Click to collapse
Many thanks bro, worked perfectly! I haven't really kept up with android since 5.1, and now it's a bit hard to get back on track.
Data is intact, nothing lost, and the device is up and running.

droidx8 said:
Many thanks bro, worked perfectly! I haven't really kept up with android since 5.1, and now it's a bit hard to get back on track.
Data is intact, nothing lost, and the device is up and running.
Click to expand...
Click to collapse
Really nice to hear. Have fun with this little Beasty device

Phone is stuck on android one logo. TWRP Recovery installed can't wipe data. Help fix

So I was messing with my phone because I just got it rooted, I was excited; my last phone that was rooted was my Xperia C and that was years ago. I messed with Magisk modules and somehow came across a video on how to uninstall a module whereas I was just deleting them in the Magisk App. I tried the uninstall mod. I used TWRP Recovery but then the uninstall mod did not install. Now I am stuck with the android one logo. Please I need help .
Update! I was still trying to wipe the data. I don't know why it went through now it doesn't even go to the android one logo
Update no. 2! so i tried flashing it and it worked, I completely forgot about the MiFlashingTool, I was hesitant to actually flash with TRWP just because after I unlocked OEM on my device I can't seem to transfer files anymore in my phone (but probably it's because of the drivers). So I flashed it and rooted it again. I kinda am pretty knowledgeable about it too now. All's well that ends well.

Good to hear you were able to recover your phone. Always remember to do a full backup in TWRP before experimenting, in case something goes wrong

Tepig said:
Good to hear you were able to recover your phone. Always remember to do a full backup in TWRP before experimenting, in case something goes wrong
Click to expand...
Click to collapse
how to do a full back up in TWRP ? and what if i use the "Hot Boot" TWRP ?
#newbiehere

iSEKAI said:
how to do a full back up in TWRP ? and what if i use the "Hot Boot" TWRP ?
#newbiehere
Click to expand...
Click to collapse
Look at backup in twrp ? full means tick all the boxes. And hotboot means that you don't have a sticking twrp. However you still can backup on a MicroSD card.

henk_j said:
Look at backup in twrp ? full means tick all the boxes. And hotboot means that you don't have a sticking twrp. However you still can backup on a MicroSD card.
Click to expand...
Click to collapse
hmm.. so having twrp installed is really neccesary here .. ?
can i installed twrp recovery on my mi a1 running last pie OS ?
and if it can , will it make me unable to receive OTA update?
i know i can just flash the new update via twrp but the were kinda huge difference.. i mean OTA update were only around 250MB on the last patch feb 5th
but if we wanna flash it via twrp (i hotboot it back then) the file was above 1GB ?

NooDoAh said:
So I was messing with my phone because I just got it rooted, I was excited; my last phone that was rooted was my Xperia C and that was years ago. I messed with Magisk modules and somehow came across a video on how to uninstall a module whereas I was just deleting them in the Magisk App. I tried the uninstall mod. I used TWRP Recovery but then the uninstall mod did not install. Now I am stuck with the android one logo. Please I need help .
Update! I was still trying to wipe the data. I don't know why it went through now it doesn't even go to the android one logo
Update no. 2! so i tried flashing it and it worked, I completely forgot about the MiFlashingTool, I was hesitant to actually flash with TRWP just because after I unlocked OEM on my device I can't seem to transfer files anymore in my phone (but probably it's because of the drivers). So I flashed it and rooted it again. I kinda am pretty knowledgeable about it too now. All's well that ends well.
Click to expand...
Click to collapse
you can try installing twrp and flash magisk install via twrp.you can try installing twrp and flash magisk uninstall via twrp.