Related
Had a problem with audio playback (volume always high no matter what). Decide to flash. PAC for my Sprint LS980. I see this:
Seems to be a lot of confusion so I'll clear things up..
ZV7->ZV8->ZVA is how the ota history goes, with ZVB on the way.
If you're on stock ZVA, your aboot (bootloader) may not be downgraded, in that case, use FreeGee from Play Store to install a recovery, it will automatically downgrade your aboot.
if you have the ZVA Radio, just flash furnace or dr87's kernel after you flash an AOSP ROM, all done.
Click to expand...
Click to collapse
Sorce: http://forum.xda-developers.com/showthread.php?t=2669074
Seeing the last sentance, I think that if I flash ZVA Radio, SlimKat ROM (the one that causes me problems) and then dr87's kernel I could try a ZVA experience. I flashed SlimKat again becuase I was going to change anyway, I wanted to try it with ZVA.
Tell myself why not, I do it.
Fails but I didnt pay much attention. I reboot.
Stuck in fastboot mode and cant escape. Recovery is a no-go.
Tried flashing both ZV7aboot.img and twrp2.6.3.0.img into their appropriate partitions (boot and recovery).
Still having problems, but now I cant do any button combination (except DownloadMode. Cant turn off) after ZV7aboot.img flash.
I dont want to erase my memory (~26GB of valuable data). Is there a way to flash a ZV8Radio.zip from fastboot? I think thats my problem, but Im not too sure. Just access to recovery would allow my to fix my problems.
Thanks anyone for any help! I think I really screwed myself over this time. Thanks everyone!
Edit: Anyone know where to get a boot.img and system.img for the Sprint LS980?
zv7_aboot.img isn't a boot.img, it's the bootloader. Use FreeGee to install twrp, it will handle the aboot for you. Then you can take advantage of the last sentence.
Savoca said:
zv7_aboot.img isn't a boot.img, it's the bootloader. Use FreeGee to install twrp, it will handle the aboot for you. Then you can take advantage of the last sentence.
Click to expand...
Click to collapse
I am stuck in fastboot. No recovery. Download mode is also accessable.
Which of the following would help:
* System.img and Boot.img (where to find em?)
* A kernel .img (Do they exist?)
* Flashing the ZV7 or 8 aboot.img oncemore with twrp.img again?
Thanks for coming to help! It means a lot.
RevolcFael4 said:
I am stuck in fastboot. No recovery. Download mode is also accessable.
Which of the following would help:
* System.img and Boot.img (where to find em?)
* A kernel .img (Do they exist?)
* Flashing the ZV7 or 8 aboot.img oncemore with twrp.img again?
Thanks for coming to help! It means a lot.
Click to expand...
Click to collapse
If you can boot into a rom, use FreeGee to install twrp. If you can't boot into rom and recovery, you need to flashtool.
Savoca said:
If you can boot into a rom, use FreeGee to install twrp. If you can't boot into rom and recovery, you need to flashtool.
Click to expand...
Click to collapse
Flashtools is asking for login and password. ?
Does this mean I have to wipe all user data in order to use it?
Edit: Do you know where System.img and Boot.img could be downloaded? I think its my only hope.
RevolcFael4 said:
Flashtools is asking for login and password. ?
Does this mean I have to wipe all user data in order to use it?
Edit: Do you know where System.img and Boot.img could be downloaded? I think its my only hope.
Click to expand...
Click to collapse
You didn't read the tutorial.
http://downloads.codefi.re/autoprime/LG/LG_G2
Savoca said:
You didn't read the tutorial.
http://downloads.codefi.re/autoprime/LG/LG_G2
Click to expand...
Click to collapse
Thanks for the link! That was extremely helpful.
What I did to gain access to twrp again was:
Download boot.img from the link.
Download aboot.img from link.
Download twrp.img (but this isnt necessary, file is already available on phone. No need.)
* Enter command 'fastboot flash boot boot.img'
* (If you hold power it starts showing LG Logo.)
* Go back to Fastboot. Enter command 'fastboot flash aboot aboot.img'
* Now TWRP access is regained! Phone doesnt boot normally, must flash ROM and stuff again.
Thanks a lot! This was an okay first fastboot experience.
Soft Bricked Sprint LS980?
Hello, I'm having a similar problem. I haven't had a phone for a couple years since tinkering with my Evo and thought I still knew what I was doing with my new G2. That proved to be incorrect.
I had it semi rooted. (I followed the instructions using Ioroot and Kingo) I wasn't able to change APN and use GSM for Metro PCS
After reading up about the spark patch I followed a tutorial (not very well obviously) and managed to get the phone will it will no longer boot.
I can get it into bootloader, and a frozen in download mode. otherwise it just hangs at the LG logo.
Is there a way to recover from bootloader?
I copied twrp-2.6.3.2-g2spr.img and zv7-aboot.img to the phone and did the following.
Here are the commands I used with the guide. I looks like I was using 2 different guides at once..... :/
Originally Posted by darkpoe View Post
This phone does not use Mass storage mode, it uses MTP, you will see it as a phone inside windows explorer and when you click into it you will see "internal storage" this internal storage is what I am referring to as the root of the sdcard (as they are as well)
Also, dont blame me if your phone dies, all this stuff will void your warranty of your phone and your toaster!
Hit the build number under about phone --> software until developer mode is enabled
goto developer mode turn on mtp mode
go download twrp from there site http://www.teamw.in/project/twrp2/197
I used kingo but cant link on xda ,, google it .. its on cnet as well
get http://koush.com/post/universal-adb-driver install (works on all windows)
get http://www.xda-developers.com/androi...oot-installer/has good quick adb install it
copy the downloaded openrecovery for sprint onto the phone directly into the "root" folder (root folder being like when you look at yoru C: drive in windows explorer that is the root folder under linux), when you plug into the pc, make sure in mtp mode
with phone still plugged in run kingo and root it
it will reboot
with phone plugged in run "adb usb" from command prompt on pc (from the link for adb that it installed, it will open a command prompt for you in the proper folder when you click it)
approve adb connection on phone
then run "adb shell" from command prompt on pc
type su, approve it on phone
paste this next line exactly at the prompt
********** this is the line I used from a different guide ***** dd if=/sdcard/zv7-aboot.img of=/dev/block/platform/msm_sdcc.1/by-name/aboot
dd if=/sdcard/openrecovery-twrp-2.6.3.2-g2spr.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
let it flash
it will say bytes copied and you will be good
type reboot inside the shell
the phone will reboot
I use goo manager from play store to boot into recovery, I dont even know the key combo for it yet.
Any help would be appreciated, thank you.
---------- Post added at 02:59 AM ---------- Previous post was at 02:06 AM ----------
x_lord said:
Hello, I'm having a similar problem. I haven't had a phone for a couple years since tinkering with my Evo and thought I still knew what I was doing with my new G2. That proved to be incorrect.
I had it semi rooted. (I followed the instructions using Ioroot and Kingo) I wasn't able to change APN and use GSM for Metro PCS
After reading up about the spark patch I followed a tutorial (not very well obviously) and managed to get the phone will it will no longer boot.
I can get it into bootloader, and a frozen in download mode. otherwise it just hangs at the LG logo.
Is there a way to recover from bootloader?
I copied twrp-2.6.3.2-g2spr.img and zv7-aboot.img to the phone and did the following.
Here are the commands I used with the guide. I looks like I was using 2 different guides at once..... :/
Originally Posted by darkpoe View Post
This phone does not use Mass storage mode, it uses MTP, you will see it as a phone inside windows explorer and when you click into it you will see "internal storage" this internal storage is what I am referring to as the root of the sdcard (as they are as well)
Also, dont blame me if your phone dies, all this stuff will void your warranty of your phone and your toaster!
Hit the build number under about phone --> software until developer mode is enabled
goto developer mode turn on mtp mode
go download twrp from there site http://www.teamw.in/project/twrp2/197
I used kingo but cant link on xda ,, google it .. its on cnet as well
get http://koush.com/post/universal-adb-driver install (works on all windows)
get http://www.xda-developers.com/androi...oot-installer/has good quick adb install it
copy the downloaded openrecovery for sprint onto the phone directly into the "root" folder (root folder being like when you look at yoru C: drive in windows explorer that is the root folder under linux), when you plug into the pc, make sure in mtp mode
with phone still plugged in run kingo and root it
it will reboot
with phone plugged in run "adb usb" from command prompt on pc (from the link for adb that it installed, it will open a command prompt for you in the proper folder when you click it)
approve adb connection on phone
then run "adb shell" from command prompt on pc
type su, approve it on phone
paste this next line exactly at the prompt
********** this is the line I used from a different guide ***** dd if=/sdcard/zv7-aboot.img of=/dev/block/platform/msm_sdcc.1/by-name/aboot
dd if=/sdcard/openrecovery-twrp-2.6.3.2-g2spr.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
let it flash
it will say bytes copied and you will be good
type reboot inside the shell
the phone will reboot
I use goo manager from play store to boot into recovery, I dont even know the key combo for it yet.
Any help would be appreciated, thank you.
Click to expand...
Click to collapse
Found this: Worked like a charm.
–]rdsqc22 2 points 23 days ago
Alright, sorry to comment on something 3 months old, but I just had this problem and managed to solve it.
When in the mode described above, you are still able to use Fastboot. Get a linux computer and install fastboot.
Then, go here: http://downloads.codefi.re/autoprime/LG/LG_G2/LS980/Stock_Firmware/zvc_partitions
Download the images for laf, aboot, boot, and recovery.
type the following commands in fastboot:
fastboot erase boot
fastboot erase aboot
fastboot erase recovery
fastboot erase laf
fastboot flash boot 6-boot.img
fastboot flash aboot 4-aboot.img
fastboot flash recovery 10-recovery.img
fastboot flash laf 11-laf.img
fastboot reboot
This fixed the problem for me. Good luck!
x_lord said:
Found this: Worked like a charm.
–]rdsqc22 2 points 23 days ago
Alright, sorry to comment on something 3 months old, but I just had this problem and managed to solve it.
When in the mode described above, you are still able to use Fastboot. Get a linux computer and install fastboot.
Then, go here: http://downloads.codefi.re/autoprime/LG/LG_G2/LS980/Stock_Firmware/zvc_partitions
Download the images for laf, aboot, boot, and recovery.
type the following commands in fastboot:
fastboot erase boot
fastboot erase aboot
fastboot erase recovery
fastboot erase laf
fastboot flash boot 6-boot.img
fastboot flash aboot 4-aboot.img
fastboot flash recovery 10-recovery.img
fastboot flash laf 11-laf.img
fastboot reboot
This fixed the problem for me. Good luck!
Click to expand...
Click to collapse
Sorry for not replying, but I see you managed to fix your problem. All you needed to do was download .img files, then enter commands through fastboot. Although it is slightly more complicated than that, its the rough outline of what needs to be done to fix it. Nice work fixing your problem. I came back to this thread to remind myself of the commands that need to be entered (My comments help myself).
I think I am just going to copy-paste the quoted box above if anyone needs instructions how to do this. Thanks for the quick guide I can use to help others!
bricked , simple fix?
x_lord said:
Hello, I'm having a similar problem. I haven't had a phone for a couple years since tinkering with my Evo and thought I still knew what I was doing with my new G2. That proved to be incorrect.
I had it semi rooted. (I followed the instructions using Ioroot and Kingo) I wasn't able to change APN and use GSM for Metro PCS
After reading up about the spark patch I followed a tutorial (not very well obviously) and managed to get the phone will it will no longer boot.
I can get it into bootloader, and a frozen in download mode. otherwise it just hangs at the LG logo.
Is there a way to recover from bootloader?
I copied twrp-2.6.3.2-g2spr.img and zv7-aboot.img to the phone and did the following.
Here are the commands I used with the guide. I looks like I was using 2 different guides at once..... :/
Originally Posted by darkpoe View Post
This phone does not use Mass storage mode, it uses MTP, you will see it as a phone inside windows explorer and when you click into it you will see "internal storage" this internal storage is what I am referring to as the root of the sdcard (as they are as well)
Also, dont blame me if your phone dies, all this stuff will void your warranty of your phone and your toaster!
Hit the build number under about phone --> software until developer mode is enabled
goto developer mode turn on mtp mode
go download twrp from there site http://www.teamw.in/project/twrp2/197
I used kingo but cant link on xda ,, google it .. its on cnet as well
get http://koush.com/post/universal-adb-driver install (works on all windows)
get http://www.xda-developers.com/androi...oot-installer/has good quick adb install it
copy the downloaded openrecovery for sprint onto the phone directly into the "root" folder (root folder being like when you look at yoru C: drive in windows explorer that is the root folder under linux), when you plug into the pc, make sure in mtp mode
with phone still plugged in run kingo and root it
it will reboot
with phone plugged in run "adb usb" from command prompt on pc (from the link for adb that it installed, it will open a command prompt for you in the proper folder when you click it)
approve adb connection on phone
then run "adb shell" from command prompt on pc
type su, approve it on phone
paste this next line exactly at the prompt
********** this is the line I used from a different guide ***** dd if=/sdcard/zv7-aboot.img of=/dev/block/platform/msm_sdcc.1/by-name/aboot
dd if=/sdcard/openrecovery-twrp-2.6.3.2-g2spr.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
let it flash
it will say bytes copied and you will be good
type reboot inside the shell
the phone will reboot
I use goo manager from play store to boot into recovery, I dont even know the key combo for it yet.
Any help would be appreciated, thank you.
---------- Post added at 02:59 AM ---------- Previous post was at 02:06 AM ----------
Found this: Worked like a charm.
–]rdsqc22 2 points 23 days ago
Alright, sorry to comment on something 3 months old, but I just had this problem and managed to solve it.
When in the mode described above, you are still able to use Fastboot. Get a linux computer and install fastboot.
Then, go here: http://downloads.codefi.re/autoprime/LG/LG_G2/LS980/Stock_Firmware/zvc_partitions
Download the images for laf, aboot, boot, and recovery.
type the following commands in fastboot:
fastboot erase boot
fastboot erase aboot
fastboot erase recovery
fastboot erase laf
fastboot flash boot 6-boot.img
fastboot flash aboot 4-aboot.img
fastboot flash recovery 10-recovery.img
fastboot flash laf 11-laf.img
fastboot reboot
This fixed the problem for me. Good luck!
Click to expand...
Click to collapse
this process (which i got from a different thread originally)
bricked my phone Lg G2 (Ls 980 sprint 32 gb)
i was on remote connection with my friend attempting all kinds of flashes (mostly custom roms and recoveries)
what he did
he FIRST flashboot erase aboot
and then erased all the other files
foolishly he then used fastboot reboot BEFORE reflashing the necessary images
this leaves me with a device that is practically 100% empty all hardware no software
i have no response no life not even a backlight EXCEPT
i can plug into windows and see Qdloader9008 is connected comport 3
and i can communicate with the device on ubuntu terminal although im not too farmiliar with terminal syntax so im not having much luck
im convinced it is as simple as reflashing at least a working recovery or download mode from which i can install everything else i nee
between QPST, Terminal, and or some other method
sorry for Noob ish ness
any help would be appreciated even if just help with a better understanding of what to do next
payment is possible
True2This said:
this process (which i got from a different thread originally)
bricked my phone Lg G2 (Ls 980 sprint 32 gb)
i was on remote connection with my friend attempting all kinds of flashes (mostly custom roms and recoveries)
what he did
he FIRST flashboot erase aboot
and then erased all the other files
foolishly he then used fastboot reboot BEFORE reflashing the necessary images
this leaves me with a device that is practically 100% empty all hardware no software
i have no response no life not even a backlight EXCEPT
i can plug into windows and see Qdloader9008 is connected comport 3
and i can communicate with the device on ubuntu terminal although im not too farmiliar with terminal syntax so im not having much luck
im convinced it is as simple as reflashing at least a working recovery or download mode from which i can install everything else i nee
between QPST, Terminal, and or some other method
sorry for Noob ish ness
any help would be appreciated even if just help with a better understanding of what to do next
payment is possible
Click to expand...
Click to collapse
Sorry, I barely understood what to do originally. What you have to do next is to reflash the aboot/boot/ whatever partitions but getting to that position might be difficult. Maybe some sort of command would allow you to connect to it oncemore?
Sorry, try to look into it more and see if a dev could help. Try posting something in /r/lgg2 but then again I cant be certain anything would happen. Good luck!
Easy guide
Since the problem keeps happening to people heres a quick tutorial I made.
Download and install this (PC only?)
Now go here. (D802) (D800) (LS980) (VS980) (D803) (Device tree/others)Download the images for laf, aboot, boot, and recovery.
Place the 4 .img files in the same folder. Control right click in that folded and open terminal. If this isn't how you open terminal in a folder search"how to open terminal in a folder".
(NOTE: Commands below will differ from the file names. Change the values in the parenthesis to match the files, HOWEVER, do not type the parenthesis into the terminal prompt! It will not work if you do.)
type the following commands in fastboot:
fastboot erase boot
fastboot erase aboot
fastboot erase recovery
fastboot erase laf
fastboot flash boot (6-boot.img)
fastboot flash aboot (4-aboot.img)
fastboot flash recovery (10-recovery.img)
fastboot flash laf (11-laf.img)
fastboot reboot
You should be fine now!
Unbrick Ls980 formatting partitions
Do this: (only for LS980)
1. Download the adb.zip file
2. Unzip in you computer the adb.zip file
3. Connect your phone LS980 to your computer
4. Run "particiones lg g2.bat"
5. Enter in download mode and flash the phone
6. enjoy your phone
Link of download
https://drive.google.com/file/d/0B6VmAym2TGdIRGJmSXFqdm84NU0/view?usp=sharing
RevolcFael4 said:
Since the problem keeps happening to people heres a quick tutorial I made.
Download and install this (PC only?)
Now go here. (D802) (D800) (LS980) (VS980) (D803) (Device tree/others)Download the images for laf, aboot, boot, and recovery.
Place the 4 .img files in the same folder. Control right click in that folded and open terminal. If this isn't how you open terminal in a folder search"how to open terminal in a folder".
(NOTE: Commands below will differ from the file names. Change the values in the parenthesis to match the files, HOWEVER, do not type the parenthesis into the terminal prompt! It will not work if you do.)
type the following commands in fastboot:
fastboot erase boot
fastboot erase aboot
fastboot erase recovery
fastboot erase laf
fastboot flash boot (6-boot.img)
fastboot flash aboot (4-aboot.img)
fastboot flash recovery (10-recovery.img)
fastboot flash laf (11-laf.img)
fastboot reboot
You should be fine now!
Click to expand...
Click to collapse
i tried this with almost all model files but still on fastboot any other option?>
I want to say thank you so much for this thread. Just got a new (refurb) G2 switching carriers to T-Mo and my idiot self used the wrong root program and soft bricked to fastboot. 4 .img files later and a few commands and I don't think I've ever been so happy to see a download screen on a phone...
juancho8207 said:
Do this: (only for LS980)
1. Download the adb.zip file
2. Unzip in you computer the adb.zip file
3. Connect your phone LS980 to your computer
4. Run "particiones lg g2.bat"
5. Enter in download mode and flash the phone
6. enjoy your phone
Link of download
https://drive.google.com/file/d/0B6VmAym2TGdIRGJmSXFqdm84NU0/view?usp=sharing
Click to expand...
Click to collapse
GREAT, You are a life saver :laugh:
juancho8207 said:
Do this: (only for LS980)
1. Download the adb.zip file
2. Unzip in you computer the adb.zip file
3. Connect your phone LS980 to your computer
4. Run "particiones lg g2.bat"
5. Enter in download mode and flash the phone
6. enjoy your phone
Link of download
https://drive.google.com/file/d/0B6VmAym2TGdIRGJmSXFqdm84NU0/view?usp=sharing
Click to expand...
Click to collapse
wow.. worked flawlessly... thank you very much :good::good::laugh::laugh:
My Remix Ultratablet current running 2.0.305 keep random restart everyday.
So I wish to downgrade to OS 1.5
I ask for help form office Jide support , they told me I need to
Q1) Problem # stuck on step #1 already , When I ask where is the Remix Ultratablet driver when I install adb and fastboot ? Offical jide support told me I don't need a driver? How so ?
I can't get the tablet connect ??
Note: 1, I connect the tablet with USB to PC
Note: 2, I turn the USB debugging option on Tablet already.
Note: 3, I Test it on pc adb folder by trying "fastboot devices" only get "Waiting for Device" error
Q2) I also try other method (Power key + Volume up) on tablet which show
"Continue
Fastboot Protocol
Recovery Kernel
Reboot
Poweroff
Forced Recovery"
But when i press"Fastboot Protocol" , doesn't do anything ?
For your references:
Steps of instruction I receive from Jide offical support so far....
1) have ADB and Fastboot running, I download the Minimal ADB and Fastboot[/URL])
2)Download Remix OS 1.5 ROM[/URL]
3) Unzip the downloaded zip file ( SK1WG.zip ) and go to the folder
4. Connect the Remix to the computer via USB.
Make sure the fastboot binary is in your PATH ) or that you place the recovery image in the same directory as fastboot.
6. Open a terminal on your PC and reboot the device into fastboot mode by typing adb reboot bootloader or by using the hardware key combination for your device while it is powered off.
7. Once the device is in fastboot mode, verify your PC sees the device by typing fastboot devices
-If you don't see your device serial number, and instead see "", fastboot is not configured properly on your machine. See fastboot documentation for more info.
-If you see "no permissions fastboot", make sure your UDEV rules are setup correctly.
8. Clean the existing data by entering the following command: fastboot -w
9. Flash images onto your device by entering the following three commands:
-fastboot flash system system.img
-fastboot flash recovery recovery.img
-fastboot flash boot boot.img
10. Once the flash completes successfully, run the following command to reboot the device into recovery to verify the installation.
-fastboot reboot
did u download the correct fastboot? you need Android 5.0 to get Remix 1.5
AmoraRei said:
did u download the correct fastboot? you need Android 5.0 to get Remix 1.5
Click to expand...
Click to collapse
That makes no sense what so ever.
Maybe it would be better to ask what platform he is using to flash his device with, as the instructions he has copy and pasted refer to Linux (udev rules)
it makes sense to me cause you have download the correct Android SDK to work on certain Android platforms.
https://developer.android.com/studio/releases/platforms.html
To compile your application against a particular version of Android, you must use the SDK Manager to download and install the SDK Platform for that release.
AmoraRei said:
it makes sense to me cause you have download the correct Android SDK to work on certain Android platforms.
To compile your application against a particular version of Android, you must use the SDK Manager to download and install the SDK Platform for that release.
Click to expand...
Click to collapse
Thanks of the reply ,
I'm using Win7 amd the Remix Ultratablet current running 2.0.305
I can't post link , but the ADB /Fastboot verson I download is also from xda Title "[TOOL]Minimal ADB and Fastboot [10-22-16]"
I download the "Version 1.4.1 Portable Here" with
MD5 Checksum: D7B1C009C87C77AAF045FA3ED239E591
Thanks for all the help in advance
When u plugged up the tablet to the pc, what did device manager say?
my associate said try this fastboot http://forum.xda-developers.com/showthread.php?t=2588979
AmoraRei said:
When u plugged up the tablet to the pc, what did device manager say?
my associate said try this fastboot http://forum.xda-developers.com/showthread.php?t=2588979
Click to expand...
Click to collapse
not exactly,i said to try this ,to install adb drivers.
http://forum.xda-developers.com/attachment.php?attachmentid=2480396&d=1388281089
tailslol said:
not exactly,i said to try this ,to install adb drivers.
http://forum.xda-developers.com/attachment.php?attachmentid=2480396&d=1388281089
Click to expand...
Click to collapse
well thank u for coming here and posting
:victory:
AmoraRei said:
When u plugged up the tablet to the pc, what did device manager say?
my associate said try this fastboot http://forum.xda-developers.com/showthread.php?t=2588979
Click to expand...
Click to collapse
when the tablet plugin to WIN7 , I got pop up windoes "Autoplay"
Name REMIX SK1WG
-Sync digital media file to this device
-Open device to view files
-Import picture and Video
when I click "Open device to view files" , I get to to see tablet "Internal Storage"
Thanks
sfbay998 said:
when the tablet plugin to WIN7 , I got pop up windoes "Autoplay"
Name REMIX SK1WG
-Sync digital media file to this device
-Open device to view files
-Import picture and Video
when I click "Open device to view files" , I get to to see tablet "Internal Storage"
Thanks
Click to expand...
Click to collapse
and what happens when you plug it when the device is in fastboot mode?
tailslol said:
and what happens when you plug it when the device is in fastboot mode?
Click to expand...
Click to collapse
That's the part I'm lost : What is consider "in fastboot mode"
I go to the WIN7 Folder there is unzip the "[TOOL]Minimal ADB and Fastboot [10-22-16] Version 1.4.1 Portable" and type fastboot devices , nothing happen
then I go to the tablet : turn off, then I try other method (Power key + Volume up) on tablet which show
-Continue
-Fastboot Protocol
-Recovery Kernel
-Reboot
-Poweroff
-Forced Recovery"
Nothing Happen ??
Note: I'm a first time ADB/ Fastboot user, but not totally a newbie. thanks
sfbay998 said:
That's the part I'm lost : What is consider "in fastboot mode"
I go to the WIN7 Folder there is unzip the "[TOOL]Minimal ADB and Fastboot [10-22-16] Version 1.4.1 Portable" and type fastboot devices , nothing happen
then I go to the tablet : turn off, then I try other method (Power key + Volume up) on tablet which show
-Continue
-Fastboot Protocol
-Recovery Kernel
-Reboot
-Poweroff
-Forced Recovery"
Nothing Happen ??
Note: I'm a first time ADB/ Fastboot user, but not totally a newbie. thanks
Click to expand...
Click to collapse
you should look the picture i gave you in my first message.
tailslol said:
you should look the picture i gave you in my first message.
Click to expand...
Click to collapse
Thanks, I will try the install "15 seconds ADB Installer v1.4.3" tonight when back home.
on side question: anyone know WHEN to use the (Power key + Volume up) on tablet which show
-Continue
-Fastboot Protocol
-Recovery Kernel
-Reboot
-Poweroff
-Forced Recovery"
The reason I ask because when I press "Fastboot Protocol" , it doesn't do anything. !!??
Also , the whole purpose for me to do the ADB/fastboot is to download back to OS 1.5, because my OS 2.0.305 keep random reboot ! So if anyone can tell me how to fix the OS 2.0.305 random reboot ? I might not have to do all this ADB/fastboot things ?
Thanks
sfbay998 said:
Thanks, I will try the install "15 seconds ADB Installer v1.4.3" tonight when back home.
on side question: anyone know WHEN to use the (Power key + Volume up) on tablet which show
-Continue
-Fastboot Protocol
-Recovery Kernel
-Reboot
-Poweroff
-Forced Recovery"
The reason I ask because when I press "Fastboot Protocol" , it doesn't do anything. !!??
Also , the whole purpose for me to do the ADB/fastboot is to download back to OS 1.5, because my OS 2.0.305 keep random reboot ! So if anyone can tell me how to fix the OS 2.0.305 random reboot ? I might not have to do all this ADB/fastboot things ?
Thanks
Click to expand...
Click to collapse
when you turn it on,it seems you do not have the minimum knowledge required to flash a device... you should stay away from downgrading it or study adb and fastboot videos and tutorials on google and youtube before doing anything.if you do anything wrong and brick your device,the warranty will not work,any bad flash could void your device warranty.
tailslol said:
when you turn it on,it seems you do not have the minimum knowledge required to flash a device... you should stay away from downgrading it or study adb and fastboot videos and tutorials on google and youtube before doing anything.if you do anything wrong and brick your device,the warranty will not work,any bad flash could void your device warranty.
Click to expand...
Click to collapse
I have try
Connect the Remix to the computer via USB.
fastboot devices
Which show:
xxxxxxxxxxxxxx fastboot
Then I type the following commands
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
ALL successful , then when reboot , it stuck on "Remix" flashing logo forever !!
Any help ?
sfbay998 said:
I have try
Connect the Remix to the computer via USB.
fastboot devices
Which show:
xxxxxxxxxxxxxx fastboot
Then I type the following commands
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
ALL successful , then when reboot , it stuck on "Remix" flashing logo forever !!
Any help ?
Click to expand...
Click to collapse
yea you forgot to wipe your device...
return to fastboot if you can then use those commands:
fastboot -w
fastboot reboot
update:
Now when i type
fastboot devices
I got :
xxxxxxxxxxxxxxxxxxxxxxxxxxxx fastboot
When I type: adb devices
I got:
List of devices attached
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
On the Tablet side:
Bootloop only
But I can still press "Vol up + Power" and see the following menu
-Continue
-Fastboot Protocol
-Recovery Kernel
-Reboot
-Poweroff
-Forced Recovery"
Any help would be appreciated !!
Thanks
sfbay998 said:
update:
Now when i type
fastboot devices
I got :
xxxxxxxxxxxxxxxxxxxxxxxxxxxx fastboot
When I type: adb devices
I got:
List of devices attached
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
On the Tablet side:
Bootloop only
But I can still press "Vol up + Power" and see the following menu
-Continue
-Fastboot Protocol
-Recovery Kernel
-Reboot
-Poweroff
-Forced Recovery"
Any help would be appreciated !!
Thanks
Click to expand...
Click to collapse
go to fastboot protocol ,hook it to your pc and proceed with the command i told you,but anyway caution,i told you you could brick your device...
tailslol said:
go to fastboot protocol ,hook it to your pc and proceed with the command i told you,but anyway caution,i told you you could brick your device...
Click to expand...
Click to collapse
Will try
but just want to check When I type: adb devices , iy did not list my drvice number , does it matter since I will be using "Fastboot -W" only?
sfbay998 said:
Will try
but just want to check When I type: adb devices , iy did not list my drvice number , does it matter since I will be using "Fastboot -W" only?
Click to expand...
Click to collapse
don't forget fastboot reboot and yes it matter,if the computer does not see the device the device can't receive commands...
Hi friends, i have followed instructions as per youtube video (official oneplus),struck on rebooting ..now i am able to fastboot,twrp recovery menu,have backed up using twrp backup.But not able to reboot to system.The boot logo after one plus symbol kept on rotating infinitely.Please help me.
Do a factory reset
Sent from my ONE A2005 using Tapatalk
My phone is not getting power on,though i have done factory reset from twrp 3.000 recovery.Still no go struck in boot menu with rotating logo after 1+ symbol..
Hello . Firstly try get your phone into fastboot mode. Once you have get up adb. (if you don't have adb, or find it really confusing to install, get wugfreshs root tool kit has built in adb terminal)
Open up your terminal plug in your phone and type
Code:
fastboot devices
Something should come up .
Once you done that grab the latest twrp for your device. Then FLASH! AAHHHHHHH, PROTECTOR OF THE UNIVERSE. In fastboot
Code:
fastboot flash recovery twrp.img
Once that's done type
Code:
fastboot boot recovery twrp.img
The it should boot into recovery from. Here your computer should recognize your device . You should be able to easily drag and drop a new rom and gaps on to your device
---------- Post added at 08:52 AM ---------- Previous post was at 08:50 AM ----------
Brandon Indar said:
Do a factory reset
Click to expand...
Click to collapse
Also factory reset only works on a rom level. So if roms wrong. It won't do anything
So, I had the same problem and here is my fix for it.
I am not sure, but I think you will lost all your data on this way :/
You can Skip the first 2 lines, because when you installed TWRP you already done this
1. Go to a Computer and install Adb
2. Download Minimal Adb and Fastboot
3. Download the offical Rom on the OP2 Site and copy the .zip file into the Fastboot folder
4. Rename the .zip into rom.zip
5.Connect your phone to the Computer
6. Start into Twrp, go to advanced, click on adb Sideload
6. Now go to your computer, into the Fastboot Folder and start the command line and type: adb sideload /path/to/rom.zip
7. It should now take some minutes to install the Rom, you will see how many percentages on the Screen (It will only show until 50%, don't worry about that)
8. Voila, your Phone should now work again
To root it again, there are some modified UpdateSu-Files specially for your current Rom.Version. When you are on 3.5.6 you can use the attached file
Hi.
I need help. I already checked any relating topics on this and other boards, but I couldn't find any help.
I tried to flash TWRP Recovery with the "All-In-One-Tool", but as soon as the phone entered fastboot-mode it couldn't be recognized by the system anymore.
Error Code 43. (USB\DEVICE_DESCRIPTOR_FAILURE)
I am running a Windows 10 Machine.
Solutions I already tried:
- using different drivers (lenovo v1.1.16, zuk v1.0.8, latest google usb drivers from sdk)
- with deactivated driver-signing-check (or what it is called)
- different adb, fastboot tools (mini adb, etc.)
- running live cd of FWUI (forget windows use linux)
- using different usb ports on my pc
Additional to that, my power-button isn't working anymore (since a few weeks now) and I have no idea how to reboot my phone.
I would really appreciate your help.
Follow these steps to install twrp in easy manner:
1.Firstly install lenovo usb drivers.( look download one at bottom of this post for files)
2.Then Go to the adb driver folder and do install necessary set ups according to your system(64 bit or 32 bit).
3.Now go back and move to AndroidSDKSlim\android-sdk-windows\platform-tools folder (put on your phone into bootloader mode and connect usb).
4.Type fastboot -i 0x2b4c devices in cmd and see if there is a reply.If you got reply It means that your drivers are properly installed otherwise not.
5.Once you get reply type fastboot -i 0x2b4c flash recovery twrp_recovery.img
6.After flashing done Disconnect USB then go to the recovery mode and that's it you will see twrp installed as successfully.
(To boot your Device into recovery mode, just turn your device off and then press and hold volume down and power keys at the same time)
Note: It worked for me in windows 10(64 bit).Don't disconnect Usb from your PC while flashing Twrp.
Download:Because xda won't allowing me to put download links up to 10 posts as i'm new So give your email in reply i will send files to that email.
thank you.
delete
Problem solved. I don't know the exact solution.
I waited until the battery was empty and recharged it, phone was booting normal. I installed another set of lenovo driver on my pc and gave it a shot. This time the device got recognized by windows and i was able to unlock the bootloader and flash the recovery.
Stuck in Fastboot, USB does not connect
srk2521 said:
Follow these steps to install twrp in easy manner:
1.Firstly install lenovo usb drivers.( look download one at bottom of this post for files)
2.Then Go to the adb driver folder and do install necessary set ups according to your system(64 bit or 32 bit).
3.Now go back and move to AndroidSDKSlim\android-sdk-windows\platform-tools folder (put on your phone into bootloader mode and connect usb).
4.Type fastboot -i 0x2b4c devices in cmd and see if there is a reply.If you got reply It means that your drivers are properly installed otherwise not.
5.Once you get reply type fastboot -i 0x2b4c flash recovery twrp_recovery.img
6.After flashing done Disconnect USB then go to the recovery mode and that's it you will see twrp installed as successfully.
(To boot your Device into recovery mode, just turn your device off and then press and hold volume down and power keys at the same time)
Note: It worked for me in windows 10(64 bit).Don't disconnect Usb from your PC while flashing Twrp.
Download:Because xda won't allowing me to put download links up to 10 posts as i'm new So give your email in reply i will send files to that email.
thank you.
Click to expand...
Click to collapse
Please send the download link to my email id : [email protected]
Thank you in Advance.
srk2521 said:
Follow these steps to install twrp in easy manner:
1.Firstly install lenovo usb drivers.( look download one at bottom of this post for files)
2.Then Go to the adb driver folder and do install necessary set ups according to your system(64 bit or 32 bit).
3.Now go back and move to AndroidSDKSlim\android-sdk-windows\platform-tools folder (put on your phone into bootloader mode and connect usb).
4.Type fastboot -i 0x2b4c devices in cmd and see if there is a reply.If you got reply It means that your drivers are properly installed otherwise not.
5.Once you get reply type fastboot -i 0x2b4c flash recovery twrp_recovery.img
6.After flashing done Disconnect USB then go to the recovery mode and that's it you will see twrp installed as successfully.
(To boot your Device into recovery mode, just turn your device off and then press and hold volume down and power keys at the same time)
Note: It worked for me in windows 10(64 bit).Don't disconnect Usb from your PC while flashing Twrp.
Download:Because xda won't allowing me to put download links up to 10 posts as i'm new So give your email in reply i will send files to that email.
thank you.
Click to expand...
Click to collapse
When i am connecting my lenovo zuk z1 in laptop its only charging......does not recognize my zuk z1..i am getting irritating..
plz solve this issue....
send me also personally...
thanks for advance
my mail id: [email protected]
srk2521 said:
Follow these steps to install twrp in easy manner:
1.Firstly install lenovo usb drivers.( look download one at bottom of this post for files)
2.Then Go to the adb driver folder and do install necessary set ups according to your system(64 bit or 32 bit).
3.Now go back and move to AndroidSDKSlim\android-sdk-windows\platform-tools folder (put on your phone into bootloader mode and connect usb).
4.Type fastboot -i 0x2b4c devices in cmd and see if there is a reply.If you got reply It means that your drivers are properly installed otherwise not.
5.Once you get reply type fastboot -i 0x2b4c flash recovery twrp_recovery.img
6.After flashing done Disconnect USB then go to the recovery mode and that's it you will see twrp installed as successfully.
(To boot your Device into recovery mode, just turn your device off and then press and hold volume down and power keys at the same time)
Note: It worked for me in windows 10(64 bit).Don't disconnect Usb from your PC while flashing Twrp.
Download:Because xda won't allowing me to put download links up to 10 posts as i'm new So give your email in reply i will send files to that email.
thank you.
Click to expand...
Click to collapse
Same happened to me..computer not recognising my phone (zuk z1 ham) even after installing drivers.
It is showing usb not recognized in device manager.and Please share fastboot tutorial for flashing stock rom as I also hardbricked my phone.
Send me files to= [email protected]
thanks i advance.:angel:
hello, may i have the drivers to my dnalexxio on gmail com mailbox?
thanks
Help me my dear friend!!!!
srk2521 said:
Follow these steps to install twrp in easy manner:
1.Firstly install lenovo usb drivers.( look download one at bottom of this post for files)
2.Then Go to the adb driver folder and do install necessary set ups according to your system(64 bit or 32 bit).
3.Now go back and move to AndroidSDKSlim\android-sdk-windows\platform-tools folder (put on your phone into bootloader mode and connect usb).
4.Type fastboot -i 0x2b4c devices in cmd and see if there is a reply.If you got reply It means that your drivers are properly installed otherwise not.
5.Once you get reply type fastboot -i 0x2b4c flash recovery twrp_recovery.img
6.After flashing done Disconnect USB then go to the recovery mode and that's it you will see twrp installed as successfully.
(To boot your Device into recovery mode, just turn your device off and then press and hold volume down and power keys at the same time)
Note: It worked for me in windows 10(64 bit).Don't disconnect Usb from your PC while flashing Twrp.
Download:Because xda won't allowing me to put download links up to 10 posts as i'm new So give your email in reply i will send files to that email.
thank you.
Click to expand...
Click to collapse
Email ID: [email protected]
Pls send me the files as soon as possible.......... I will be grateful to you!
srk2521 said:
Follow these steps to install twrp in easy manner:
1.Firstly install lenovo usb drivers.( look download one at bottom of this post for files)
2.Then Go to the adb driver folder and do install necessary set ups according to your system(64 bit or 32 bit).
3.Now go back and move to AndroidSDKSlim\android-sdk-windows\platform-tools folder (put on your phone into bootloader mode and connect usb).
4.Type fastboot -i 0x2b4c devices in cmd and see if there is a reply.If you got reply It means that your drivers are properly installed otherwise not.
5.Once you get reply type fastboot -i 0x2b4c flash recovery twrp_recovery.img
6.After flashing done Disconnect USB then go to the recovery mode and that's it you will see twrp installed as successfully.
(To boot your Device into recovery mode, just turn your device off and then press and hold volume down and power keys at the same time)
Note: It worked for me in windows 10(64 bit).Don't disconnect Usb from your PC while flashing Twrp.
Download:Because xda won't allowing me to put download links up to 10 posts as i'm new So give your email in reply i will send files to that email.
thank you.
Click to expand...
Click to collapse
Please email me at [email protected] Thank you!!
Stuck in fastboot
srk2521 said:
Follow these steps to install twrp in easy manner:
1.Firstly install lenovo usb drivers.( look download one at bottom of this post for files)
2.Then Go to the adb driver folder and do install necessary set ups according to your system(64 bit or 32 bit).
3.Now go back and move to AndroidSDKSlim\android-sdk-windows\platform-tools folder (put on your phone into bootloader mode and connect usb).
4.Type fastboot -i 0x2b4c devices in cmd and see if there is a reply.If you got reply It means that your drivers are properly installed otherwise not.
5.Once you get reply type fastboot -i 0x2b4c flash recovery twrp_recovery.img
6.After flashing done Disconnect USB then go to the recovery mode and that's it you will see twrp installed as successfully.
(To boot your Device into recovery mode, just turn your device off and then press and hold volume down and power keys at the same time)
Note: It worked for me in windows 10(64 bit).Don't disconnect Usb from your PC while flashing Twrp.
Download:Because xda won't allowing me to put download links up to 10 posts as i'm new So give your email in reply i will send files to that email.
thank you.
Click to expand...
Click to collapse
Same here, I'm desperately trying to unlock the bootloader. On Windows 10 adb correctly recognize my Z1, but when I reboot in fastboot mode I can't get past the "<waiting for device>" message.
Could you please send a download link to [email protected]?
Thanks a lot!
srk2521 said:
Follow these steps to install twrp in easy manner:
1.Firstly install lenovo usb drivers.( look download one at bottom of this post for files)
2.Then Go to the adb driver folder and do install necessary set ups according to your system(64 bit or 32 bit).
3.Now go back and move to AndroidSDKSlim\android-sdk-windows\platform-tools folder (put on your phone into bootloader mode and connect usb).
4.Type fastboot -i 0x2b4c devices in cmd and see if there is a reply.If you got reply It means that your drivers are properly installed otherwise not.
5.Once you get reply type fastboot -i 0x2b4c flash recovery twrp_recovery.img
6.After flashing done Disconnect USB then go to the recovery mode and that's it you will see twrp installed as successfully.
(To boot your Device into recovery mode, just turn your device off and then press and hold volume down and power keys at the same time)
Note: It worked for me in windows 10(64 bit).Don't disconnect Usb from your PC while flashing Twrp.
Download:Because xda won't allowing me to put download links up to 10 posts as i'm new So give your email in reply i will send files to that email.
thank you.
Click to expand...
Click to collapse
Can you please send me on [email protected]
Thanks in advance
Need Link for Fastboot Drivers
Please send the download link to me on [email protected]
VictKibal said:
Same here, I'm desperately trying to unlock the bootloader. On Windows 10 adb correctly recognize my Z1, but when I reboot in fastboot mode I can't get past the "<waiting for device>" message.
Could you please send a download link to [email protected]?
Thanks a lot!
Click to expand...
Click to collapse
santakittu said:
Can you please send me on [email protected]
Thanks in advance
Click to expand...
Click to collapse
waqas9783 said:
Please send the download link to me on [email protected]
Click to expand...
Click to collapse
Here are working drivers I used for my Zuk Z1 many times on windows 10 without problems.
https://drive.google.com/folderview?id=0B4Zy8uoEfFKLRFlCNVJ6aGxlYVk
I posted these drivers in other threads too
Please do not give your private mail here...
DWYOR
After a long time of googling I got a solution for yu5510a full access.
You need
Adb + fastboot
Twrp 2.8.7.0 tomato
SuperSU.zip
Coolpad drivers
Cyanogen ROM V1 from firmwarefile.com
Any Custom Rom, I am using aosp extended.
Gapps
Memory card
Install all drivers , adb & fastboot.
First flash Cyanogen ROM using YGDP tool
Use version 3.98 in other versions I got problems.
After ROM installation enable developer option.
Enable android debugging, fast reboot and check update cyanogen recovery
Now connect phone with PC
Goto adb folder
Copy twrp.img in adb folder
Shift + Right click select open command window here
Type adb devices
Device should be shown if not showing try to install adb drivers
Now after that
Type Command adb reboot-bootloader
Device will be rebooted in bootloader
Type command fastboot -i 0x1ebf oem device-info to verify device in fastboot mode and your bootloader is unlocked or not.
If bootloader showing unlocked then follow next process if not then unlock it
Type command fastboot -i 0x1ebf oem unlock
Boot loader unlocked now.
Remove data cable and remove battery from phone for 30 secs and reinsert again.
Press volume + key and hold
Attach phone with PC ( it shows fastboot mode)
After that type command
fastboot -i 0x1ebf flash recovery twrp.img
When done remove data cable & battery
After 30 secs reinsert battery
Press Volume + , Volume - & Power key
When yu logo appears release power key and keep pressing both volume keys
You will be goto twrp
Now wipe everything also format data/don't delete mmc
Restart twrp to recovery
Your internal and external storage are mounted.
Install any custom ROM for yureka/yureka plus
Flash gapps ( not required in miui & quarkos)
Flash SuperSU.zip
Reboot
It takes 10-15 minutes for first boot .
Done
Flash Latest NON-HLOS.bin before flashing any volte ROM.
Flash through fastboot
File link
https://drive.google.com/file/d/0B8Vodzmhc0GlXzdtOUFjb29EOFU/view
Extract .zip
Copy NON-HLOS.bin in adb folder
Open command prompt here
Connect phone into fastboot mode
Type command
fastboot -i 0x1ebf flash modem NON-HLOS.bin
Wait till process done.
Disconnect phone
Remove battery and insert again
Goto twrp recovery.
Install any volte enabled ROM.
Enjoy.:good:
OEM unlock command not found
hi,
I am trying to root my yu yureka plus( YU5510A white color) running android 5.1.1 , build number is 5.1.111.P0.160314.YU5510A , i am able to connect the phone to my PC running adb,
"adb devices" lists the phone , "adb reboot bootloader" puts the phone in fastboot ( screeen doesnt show fastboot instead it shows do not disconnect usb cable and non secure phone). When i run the command fastboot -i 0x1ebf oem unlock , im getting the error as command not found. same error im getting when i run the command fastboot -i 0x1ebf oem device-info
what could be the reason.
Any help in this regard is appreciated.
nischait said:
DWYOR
After a long time of googling I got a solution for yu5510a full access.
You need
Adb + fastboot
Twrp 2.8.7.0 tomato
SuperSU.zip
Coolpad drivers
Cyanogen ROM V1 from firmwarefile.com
Any Custom Rom, I am using aosp extended.
Gapps
Memory card
Install all drivers , adb & fastboot.
First flash Cyanogen ROM using YGDP tool
Use version 3.98 in other versions I got problems.
After ROM installation enable developer option.
Enable android debugging, fast reboot and check update cyanogen recovery
Now connect phone with PC
Goto adb folder
Copy twrp.img in adb folder
Shift + Right click select open command window here
Type adb devices
Device should be shown if not showing try to install adb drivers
Now after that
Type Command adb reboot-bootloader
Device will be rebooted in bootloader
Type command fastboot -i 0x1ebf oem device-info to verify device in fastboot mode and your bootloader is unlocked or not.
If bootloader showing unlocked then follow next process if not then unlock it
Type command fastboot -i 0x1ebf oem unlock
Boot loader unlocked now.
Remove data cable and remove battery from phone for 30 secs and reinsert again.
Press volume + key and hold
Attach phone with PC ( it shows fastboot mode)
After that type command
fastboot -i 0x1ebf flash recovery twrp.img
When done remove data cable & battery
After 30 secs reinsert battery
Press Volume + , Volume - & Power key
When yu logo appears release power key and keep pressing both volume keys
You will be goto twrp
Now wipe everything also format data/don't delete mmc
Restart twrp to recovery
Your internal and external storage are mounted.
Install any custom ROM for yureka/yureka plus
Flash gapps ( not required in miui & quarkos)
Flash SuperSU.zip
Reboot
It takes 10-15 minutes for first boot .
Done
Click to expand...
Click to collapse
nithin1664 said:
hi,
I am trying to root my yu yureka plus( YU5510A white color) running android 5.1.1 , build number is 5.1.111.P0.160314.YU5510A , i am able to connect the phone to my PC running adb,
"adb devices" lists the phone , "adb reboot bootloader" puts the phone in fastboot ( screeen doesnt show fastboot instead it shows do not disconnect usb cable and non secure phone). When i run the command fastboot -i 0x1ebf oem unlock , im getting the error as command not found. same error im getting when i run the command fastboot -i 0x1ebf oem device-info
what could be the reason.
Any help in this regard is appreciated.
Click to expand...
Click to collapse
Try without using 0x1ebf and report.
nischait said:
Try without using 0x1ebf and report.
Click to expand...
Click to collapse
I tried without -i 0x1ebf also but it does not show in fastboot. With -i 0x1ebf it shows "xyznumbers fastboot" . The problem now is , I flashed through YGDP tool and now it shows aboot failed image, and does not boot at all.
Why doe my phone show non secure phone ?
Please help.
Yogesh1969 said:
I tried without -i 0x1ebf also but it does not show in fastboot. With -i 0x1ebf it shows "xyznumbers fastboot" . The problem now is , I flashed through YGDP tool and now it shows aboot failed image, and does not boot at all.
Why doe my phone show non secure phone ?
Please help.
Click to expand...
Click to collapse
Download cyanogen ROM and flash it with ygdp
1st ever rom uploaded in AFH.
Your device should be boot up.
Then try with command prompt.
May be new device having different device ID.
nischait said:
Try without using 0x1ebf and report.
Click to expand...
Click to collapse
Hi...
I too face the same problem, I tried fastboot adb and YU yureka drivers reinstalling and connected device to PC it gets charger when connection in on, when connected in fastboot mode on device it shows fastboot but when check in PC for device info, it dosen't show any connected device. I followed many tutorials for this to install TWRP but its impossible to install without establishing a proper connection. I also tried to install TWRP without PC, for this i need to root my device and flash TWRP img, so I started trying root I had used kingroot, kingoroot, towelroot and some more but failed to root, I am still trying to install TWRP can anyone help me in either of the process to install TWRP.
nischait said:
Download cyanogen ROM and flash it with ygdp
1st ever rom uploaded in AFH.
Your device should be boot up.
Then try with command prompt.
May be new device having different device ID.
Click to expand...
Click to collapse
I couldnt find the ygdp version of Cynogen, any way I found a way from youtube which solved my problems.
Link : https://www.youtube.com/watch?v=2Gpz65r2pNM
---------- Post added at 05:21 PM ---------- Previous post was at 05:18 PM ----------
vijaykumarbabu079 said:
Hi...
I too face the same problem, I tried fastboot adb and YU yureka drivers reinstalling and connected device to PC it gets charger when connection in on, when connected in fastboot mode on device it shows fastboot but when check in PC for device info, it dosen't show any connected device. I followed many tutorials for this to install TWRP but its impossible to install without establishing a proper connection. I also tried to install TWRP without PC, for this i need to root my device and flash TWRP img, so I started trying root I had used kingroot, kingoroot, towelroot and some more but failed to root, I am still trying to install TWRP can anyone help me in either of the process to install TWRP.
Click to expand...
Click to collapse
For drivers problem install pdanet. And you can refer to the youtube video link (above post) if you want for all needs.
vijaykumarbabu079 said:
Hi...
I too face the same problem, I tried fastboot adb and YU yureka drivers reinstalling and connected device to PC it gets charger when connection in on, when connected in fastboot mode on device it shows fastboot but when check in PC for device info, it dosen't show any connected device. I followed many tutorials for this to install TWRP but its impossible to install without establishing a proper connection. I also tried to install TWRP without PC, for this i need to root my device and flash TWRP img, so I started trying root I had used kingroot, kingoroot, towelroot and some more but failed to root, I am still trying to install TWRP can anyone help me in either of the process to install TWRP.
Click to expand...
Click to collapse
Getting your device connected is a very important stage, whether it is system,recovery or fastboot. From what I read , you can connsct through fasatboot, since you flashed cyanogen. Just flash TWRP 3.2.1 or so which is the latest, through fastboot:
fastboot flash recovery twrp.3.2.1 .img ( Remember the spaces, the name twrp.xxx.img should be same as you downloaded. If flash is successful, you can see twrp when you boot to recovery. Then flash supersu file and/or whichever rom you want.
Sorry for late answers.
I was lil busy and sorry for wrong address also.
You could get it from firmwarefile.com
I can't post link here but select yu yureka plus variant and download oldest CBP