is it possible to root mi a1 without disabling ota updates?
Just flash magisk in twrp
sebin619 said:
is it possible to root mi a1 without disabling ota updates?
Click to expand...
Click to collapse
U have to flash magisk through twrp
Ravi malge said:
U have to flash magisk through twrp
Click to expand...
Click to collapse
is it cause to error on insralling ota update
Can you flash magisk with twrp then download the ota like normal but use twrp to flash it?
Sent from my CMR-W09 using Tapatalk
robgee789 said:
Can you flash magisk with twrp then download the ota like normal but use twrp to flash it?
Click to expand...
Click to collapse
No, but you can uninstall magisk, install ota like normal and after install magisk again
mardrest said:
No, but you can uninstall magisk, install ota like normal and after install magisk again
Click to expand...
Click to collapse
So the ota doesn't mind having twrp as recovery instead of stock recovery?
Sent from my CMR-W09 using Tapatalk
No, you must have stock recovery, so you can't use persistent twrp. Only boot twrp with fastboot and mount read only system image.
mardrest said:
No, you must have stock recovery, so you can't use persistent twrp. Only boot twrp with fastboot and mount read only system image.
Click to expand...
Click to collapse
ahh ok I get it mate cheers
Sent from my CMR-W09 using Tapatalk
Related
I have huawei VNS-L21C66B131 and i already unrooted with supersu but how do i remove the twrp? cause it wont update to Nougat :/
FaNtaSy00 said:
I have huawei VNS-L21C66B131 and i already unrooted with supersu but how do i remove the twrp? cause it wont update to Nougat :/
Click to expand...
Click to collapse
Flash stock recovery using adb
You can extract stock recovery from update files
Hi, just as the title says everytime i reboot my devices after successfully installing magisk through a patched boot image file i lose root. Root works i also checked with the root checker when i don't reboot my device. What is causing this ?
Try boot to twrp [yes, just boot if you don't want to flash it] and flash magisk thru it.
tanapak1 said:
Try boot to twrp [yes, just boot if you don't want to flash it] and flash magisk thru it.
Click to expand...
Click to collapse
thanks i'll give it a try
emiljano539 said:
thanks i'll give it a try
Click to expand...
Click to collapse
Flash magisk 16.7
tanapak1 said:
Try boot to twrp [yes, just boot if you don't want to flash it] and flash magisk thru it.
Click to expand...
Click to collapse
now its working after i flashed the magisk by twrp thanks
ProchyGaming said:
Flash magisk 16.7
Click to expand...
Click to collapse
i just flashed by twrp and its working now
Doesn't twrp unable ota updates?
I updated to OOS 9.0.11. i was using root before the update. But this update just unrooted my one plus 6t. And now i get to root it with magisk. I installed TWRP through ADB. It worked but when i tried to flash magisk in twrp. I couldn't find the magisk file in twrp.please help me.
swahmad76 said:
I updated to OOS 9.0.11. i was using root before the update. But this update just unrooted my one plus 6t. And now i get to root it with magisk. I installed TWRP through ADB. It worked but when i tried to flash magisk in twrp. I couldn't find the magisk file in twrp.please help me.
Click to expand...
Click to collapse
Let's see if we can help you But first, just an FYI, you have posted in the wrong section, you should have posted in the Question and Answer section....
Moving on, what version of TWRP did you flash?
follow the TWRP guide here and use Magisk version 18.0
TWRP https://forum.xda-developers.com/on...overy-unofficial-twrp-touch-recovery-t3861482
Magisk https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Download the Stable version. Then you should be fine.
Sent from my ONEPLUS A6013 using Tapatalk
phillymade said:
Let's see if we can help you But first, just an FYI, you have posted in the wrong section, you should have posted in the Question and Answer section....
Moving on, what version of TWRP did you flash?
follow the TWRP guide here and use Magisk version 18.0
TWRP https://forum.xda-developers.com/on...overy-unofficial-twrp-touch-recovery-t3861482
Magisk https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Download the Stable version. Then you should be fine.
Click to expand...
Click to collapse
Did you root yours while on on OOS 9.0.11?
swahmad76 said:
Did you root yours while on on OOS 9.0.11?
Click to expand...
Click to collapse
I have two 6Ts on 9.0.11 rooted. Magisk 18.0, no issues.
OhioYJ said:
I have two 6Ts on 9.0.11 rooted. Magisk 18.0, no issues.
Click to expand...
Click to collapse
I installed the stable magisk. But no luck so far. The problem is that i can't find magisk zip in twrp recovery mode to flash it.
phillymade said:
Let's see if we can help you But first, just an FYI, you have posted in the wrong section, you should have posted in the Question and Answer section....
Moving on, what version of TWRP did you flash?
follow the TWRP guide here and use Magisk version 18.0
TWRP https://forum.xda-developers.com/on...overy-unofficial-twrp-touch-recovery-t3861482
Magisk https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Download the Stable version. Then you should be fine.
Click to expand...
Click to collapse
And i flashed fajita version.
You need to fastboot boot twrp image and then sideload twrp installer, then magisk 18 on top of that.
BIGWORM said:
You need to fastboot boot twrp image and then sideload twrp installer, then magisk 18 on top of that.
Click to expand...
Click to collapse
I did that in the first place. As i said i had root on the previous version. But after update. I just couldn't find magisk file in twrp recovery mode to flash it for root.
swahmad76 said:
I did that in the first place. As i said i had root on the previous version. But after update. I just couldn't find magisk file in twrp recovery mode to flash it for root.
Click to expand...
Click to collapse
Updating removes root, so you have to do it all over again. It's what has to be done with A/B partitions (unless flashing full update from twrp or going the uninstall/restore images magisk-flash to other slot route).
sssarg said:
Updating removes root, so you have to do it all over again. It's what has to be done with A/B partitions (unless flashing full update from twrp or going the uninstall/restore images magisk-flash to other slot route).
Click to expand...
Click to collapse
Then tell me what to do all over again?
Why don't you just download Magisk.zip again. Boot back to TWRP and flash
Sent from my OnePlus6T using XDA Labs
swahmad76 said:
Did you root yours while on on OOS 9.0.11?
Click to expand...
Click to collapse
No, I rooted on 9.0.7
Sent from my ONEPLUS A6013 using Tapatalk
Koont said:
Why don't you just download Magisk.zip again. Boot back to TWRP and flash
Click to expand...
Click to collapse
Did that... 100 times bro
Koont said:
Why don't you just download Magisk.zip again. Boot back to TWRP and flash
Click to expand...
Click to collapse
I just can't find any zip file in twrp! That's the issue.
sssarg said:
Updating removes root, so you have to do it all over again. It's what has to be done with A/B partitions (unless flashing full update from twrp or going the uninstall/restore images magisk-flash to other slot route).
Click to expand...
Click to collapse
You mean like unlock bootloader again? And then twrp and magisk?
swahmad76 said:
You mean like unlock bootloader again? And then twrp and magisk?
Click to expand...
Click to collapse
After unlocking bootloader.
Sent from my OnePlus 6T using XDA Labs
swahmad76 said:
I did that in the first place. As i said i had root on the previous version. But after update. I just couldn't find magisk file in twrp recovery mode to flash it for root.
Click to expand...
Click to collapse
Are you serious right now? Your can't find it either because your haven't downloaded it or haven't looked in the right directory for the zip. Download magisk boot into TWRP choose install navigate to the directory the zip is stored in then choose it and swipe to flash. And FYI anything you download normally goes to the Download folder.
Use one of the rooting tools it will do all for you, more simple.
9.0.11 don't prevent any method of rooting, it's in your side that something is wrong
Striatum_bdr said:
Use one of the rooting tools it will do all for you, more simple.
9.0.11 don't prevent any method of rooting, it's in your side that something is wrong
Click to expand...
Click to collapse
Which tool specifically?
Man, stop, I don't know, try them all
Does anybody use the TWRP A/B Retention Script? Is this for stock OOS only? Or custom Roms Too? I'm a little lost on how it actually works hope someone can explain it.
KaM1KaZ3 said:
Does anybody use the TWRP A/B Retention Script? Is this for stock OOS only? Or custom Roms Too? I'm a little lost on how it actually works hope someone can explain it.
Click to expand...
Click to collapse
When you install TWRP for Fajita (6T) you use a zip file that is run from inside a TWRP boot.
The zip install TWRP.
tech_head said:
When you install TWRP for Fajita (6T) you use a zip file that is run from inside a TWRP boot.
The zip install TWRP.
Click to expand...
Click to collapse
Yes, but if you are rooted with Magisk, you'll need to also reflash Magisk right after from within TWRP, otherwise it will boot loop to TWRP.
Sent from my ONEPLUS 6T 8/256GB using Tapatalk
Rayan said:
Yes, but if you are rooted with Magisk, you'll need to also reflash Magisk right after from within TWRP, otherwise it will boot loop to TWRP.
Sent from my ONEPLUS 6T 8/256GB using Tapatalk
Click to expand...
Click to collapse
Yes, but the OP was asking about the script.
But in general if you install TWRP, you need to install Magisk.
fastboot flash recovery OrangeFox-R10.1_1.img
boot in twrp
flash OrangeFox-R10.1_1.zip
rebbot in recovery
flash magisk 20.4
reboot recovery
flash vbmeta.img (FOR RECOVERY)
Clean caches
Reboot
fingerprint, no
Files
https://forum.xda-developers.com/realme-x2-pro/development/orangefox-recovery-x2-pro-t4063301
use vbmeta from this post
Magisk
https://github.com/topjohnwu/Magisk/releases/tag/v20.4
hi, any idea to fix fingerprint?
[email protected] said:
hi, any idea to fix fingerprint?
Click to expand...
Click to collapse
We need to wait for Realme to release a fix, just like what happened on color os when fingerprint wasn't working
On C.27 Bootloader Unlock and Root, Fingerprinter works
How to upgrade from Android 9 Color OS 6 rooted and with magisk 20.4 to new C.27? Is there a tutorial? Thank You
minoccio said:
How to upgrade from Android 9 Color OS 6 rooted and with magisk 20.4 to new C.27? Is there a tutorial? Thank You
Click to expand...
Click to collapse
Uninstall Magisk with the .zip from their site. Github here
Instal stock recovery like you did to install custom recovery.
Next, download the C.27 update and run it from the file manager. Phone will reboot and start updating
After update, just do the whole process to root C.27 version like for Android 9.
deviantor said:
Instal stock recovery like you did to install custom recovery.
Uninstall Magisk with the .zip from their site. Github here
Next, download the C.27 update and run it from the file manager. Phone will reboot and start updating
After update, just do the whole process to root C.27 version like for Android 9.
Click to expand...
Click to collapse
So basically if I'm on c27 already, it's okay to use the same root method?
adsubzero said:
So basically if I'm on c27 already, it's okay to use the same root method?
Click to expand...
Click to collapse
Yea. I was on C27 total stock then followed these tips to root and custom recovery. Its all working well so far and fingerprint works.
deviantor said:
Yea. I was on C27 total stock then followed these tips to root and custom recovery. Its all working well so far and fingerprint works.
Click to expand...
Click to collapse
I tried several thins to install Magisk succesfully with no luck.
I received my Global x2 Pro this thursday and i successfully unlocked the bootloader and flashed twrp recovery. But when I flask the magisk 20.4 zip and reboot my device, i get an error saying that my boot / recovery partition is corrupt. I have to install C27 again from twrp and it boots up.
Can anybody help me how to install Magisk succesfully? It's driving me nuts. Also, i cant download the vbmeta.img from the OP. So i tried to extract the vbmeta.img from the c27 image to flash, but also no lucck
Edit: Finally having it working with the Orangefox recovery with the vbmeta.img. I thought that the link in OneDrive wasnt working, but it was my home networks which was blocking OneDrive. Problem solved!
deviantor said:
Uninstall Magisk with the .zip from their site. Github here
Instal stock recovery like you did to install custom recovery.
Next, download the C.27 update and run it from the file manager. Phone will reboot and start updating
After update, just do the whole process to root C.27 version like for Android 9.
Click to expand...
Click to collapse
Isn't it possible to install ota update from twrp? (I use mauronofrio). Is it mandatory to unroot, install C27 and then re-root?
minoccio said:
Isn't it possible to install ota update from twrp? (I use mauronofrio). Is it mandatory to unroot, install C27 and then re-root?
Click to expand...
Click to collapse
It's possible if someone makes a flashable zip, though I dont know of that can be done for every phone. Otherwise you need a stock recovery to install the OTA.
minoccio said:
Isn't it possible to install ota update from twrp? (I use mauronofrio). Is it mandatory to unroot, install C27 and then re-root?
Click to expand...
Click to collapse
Like @adsubzero said. Unless you have a custom ozip file to flash on TWRP, you need to have stock recovery to install a standard ozip.
ogutolopes said:
fastboot flash recovery OrangeFox-R10.1_1.img
boot in twrp
flash OrangeFox-R10.1_1.zip
rebbot in recovery
flash magisk 20.4
reboot recovery
flash vbmeta.img (FOR RECOVERY)
Clean caches
Reboot
fingerprint, no
Click to expand...
Click to collapse
for recovery mean recovery ka option ckick krna hai..vbmeta krty huay
In the backup options I don't see system, only system image. Does anyone else have this issue?