Database Users

Nexus 10 won't start at all after bootloop problem

Hi,
Just randomly after I ran my battery completely out one time on my nexus 10, I wasn't able to start the nexus 10. The only thing that happened was that it showed me the Google logo, and then the X-symbol. After that, it restarted itself over and over. In other words, it just entered a bootloop. After a while it stopped showing the X-symbol, and only the Google logo. So I wasn't able to start it at all. The only thing I was able to, was to enter the bootloader menu. But from there, I wasn't able to enter recovery mode or something like that, it just entered the bootloop with the Google logo.
When this happened, I had never tried to root it or something like that.
But then I decided I wanted to flash it back to stock with fastboot, to hopefully solve the bootloop issue. Then I followed this guide: nexus10root.com/nexus-10-unroot/how-to-unrootunbrick-nexus-10-factory-firmware/
However, when I tried to write ./fastboot-mac flash bootloader bootloader-XXX.img, I got the following error:
"writing 'bootloader'... FAILED (remote: partition table update fail!)"
Then I read some place that I could try to run several erase-command before I tried the previously mentioned command. After that, I am now not able to enter the bootloader menu any longer. The device will not turn on. The only way to get anything on the screen, is by plugging in the USB-cable and then it shows the loading-symbol. To summarize, I am not able to start my nexus 10 and I am not able to enter the bootloader menu.
Any suggestions for how I can try to solve this issue? Any help will be much appreciated

Update: Now I am able to get into bootloader/fastboot mode again. However, still get this when trying to flash:
sending 'bootloader' (1280 KB)... OKAY
writing 'bootloader'... FAILED (remote: partition table update fail!)
This really drives me crazy. Hope some of you have any suggestions

You have a solution?
IBalic said:
Update: Now I am able to get into bootloader/fastboot mode again. However, still get this when trying to flash:
sending 'bootloader' (1280 KB)... OKAY
writing 'bootloader'... FAILED (remote: partition table update fail!)
This really drives me crazy. Hope some of you have any suggestions
Click to expand...
Click to collapse
Hello find some solution? I have same problem:crying:
---------- Post added at 11:35 AM ---------- Previous post was at 10:44 AM ----------
I had this Problem, when i want to restore to Android 4.4.2 (KOT49H) Factory -> With command "flash-all.bat"
So i tryd to install an older Version, first to Android 4.2.2 (JDQ39) -> That's work! so i had again a working Android.
After i overwrite with newer version 4.4 and finaly overwrite again with 4.4.2. So that way works. (Maybe you dont need to install 4.4 fist, i dont try it.) :good::laugh:

Blasted kingroot - bricked my phone?

Ahh, hind sight is a wonderful thing.
After trying to use kingroot to get root access, it failed. And a few days later after rebooting.
I'm now stuck at bootup with Start Up Failed.
hab check failed for boot
Failed to verify hab image boot
failed to validate boot image
I've now tried lot's of different things, over the last few hours.
RSDLite (show device brings no thing up)
Unlock bootloader (request key, but error regarding OEM unlock not being set - no access to now set it LOL)
Downloaded stock X_Play_UK_Retail_XT1562_LPD23.118-10_CFC.xml.zip, and tried using various guides on fastboot but keep getting remote failed.
I'm on stock recovery (obviously still locked).
Any thoughts, or hope from anyone?
Obviously, not sure what support Motorola would provide for what is essentially my own fault?

Have you tried manually flashing each bit of the stock firmware/image. That might help. There's a good guide here which I followed to unbrick my device. Just follow the instructions http://theunlockr.com/2015/09/22/how-to-unroot-the-motorola-moto-x-play/

Or try this one.
http://forum.xda-developers.com/showthread.php?t=2499926

Tried the first fastboot oem lock begin but get ... (althought my phone is locked already)
(bootloader) Not supported command in current status!
FAILED (remote failure)
finished. total time: 0.063s
So stepping to next command, I get:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash partition gpt.bin
(bootloader) has-slotartition: not found
target reported max download size of 268435456 bytes
sending 'partition' (32 KB)...
OKAY [ 0.166s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 1.078s

sharebubbles said:
Tried the first fastboot oem lock begin but get ... (althought my phone is locked already)
(bootloader) Not supported command in current status!
FAILED (remote failure)
finished. total time: 0.063s
So stepping to next command, I get:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash partition gpt.bin
(bootloader) has-slotartition: not found
target reported max download size of 268435456 bytes
sending 'partition' (32 KB)...
OKAY [ 0.166s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 1.078s
Click to expand...
Click to collapse
I think you need to unlock the bootloader and then start with the 'fastboot oem lock begin' command. You can't flash a system image with a locked bootloader. Let me know how it goes!

DTLblaze said:
I think you need to unlock the bootloader and then start with the 'fastboot oem lock begin' command. You can't flash a system image with a locked bootloader. Let me know how it goes!
Click to expand...
Click to collapse
I run the unlock command, with my unique key but I get ..
...
(bootloader) Check 'Allow OEM Unlock' in Developer Options.
FAILED (remote failure)
finished. total time: 0.013s
And since I can't get into the phone, I can't therefore check the "allow OEM unclock"

Have you tried any erase data commands or reset commands? Perhaps you could reset the phone so kingroot is un-installed and then try to turn on the phone. Short of that I'm stuck for ideas really, accept booting into 'fastboot and then erasing all data and factory reset in there. Let me know.

DTLblaze said:
Have you tried any erase data commands or reset commands? Perhaps you could reset the phone so kingroot is un-installed and then try to turn on the phone. Short of that I'm stuck for ideas really, accept booting into 'fastboot and then erasing all data and factory reset in there. Let me know.
Click to expand...
Click to collapse
I tried the wipe data/factory reset and wipe cache partition from the stock recovery.
And if I try from fastboot:-
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot erase userdata
(bootloader) has-slot:userdata: not found
erasing 'userdata'...
OKAY [ 0.196s]
finished. total time: 0.198s
And then a fastboot reboot.
Back to the now standard "start up failed"
And the
AP Fastboot Flash Mode (Secure)
hab check failed for boot
Failed to verify hab image boot
failed to validate boot image
ERROR: Failed to pass validation, backup to fastboot
Fastboot reason: Fall-through from normal boot mode

Sickaxis79 said:
Or try this one.
http://forum.xda-developers.com/showthread.php?t=2499926
Click to expand...
Click to collapse
Have downloaded, and tried that - but the crux appears to be the fact that my bootloader is locked and I can't access the OEM checkbox. And therefore the tool itself can't unlock or equally install TWRP.
Unless I'm missing something in it's usage.

sharebubbles said:
I tried the wipe data/factory reset and wipe cache partition from the stock recovery.
And if I try from fastboot:-
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot erase userdata
(bootloader) has-slot:userdata: not found
erasing 'userdata'...
OKAY [ 0.196s]
finished. total time: 0.198s
And then a fastboot reboot.
Back to the now standard "start up failed"
And the
AP Fastboot Flash Mode (Secure)
hab check failed for boot
Failed to verify hab image boot
failed to validate boot image
ERROR: Failed to pass validation, backup to fastboot
Fastboot reason: Fall-through from normal boot mode
Click to expand...
Click to collapse
That really does sound like you bricked the device. If you where on lollipop software you wouldn't have the issue with check bootloader OEM unlock. If it was me I would either contact Motorola or go to a repair shop and have a motd experienced person take a look at it.

Try this, not necessary for unlock bootloader
Recognized Contributor3,144 posts Thanks: 1,591
Quote:
Originally Posted by sheikh.sami17
but i have locked bootloader. can i flash stock firmware with locked bootloader?
YES you can flash stock Moto roms meant for your model and carrier only.
Also, Never attempt to downgrade.
In this page
http://forum.xda-developers.com/moto-x/moto-x-qa/q-how-to-flash-to-stock-firmware-t3041813
I edit and made one firmware autoflasher for my x play Indian version and flashed successfully . everybody should check sparsechunk files no in flash file of your extracted stock firmware and edit my autoflasher files according to number of sparsechunk files and flash your firmware. It is definitely safe and I flashed my firmware by this but use at your own risk .
https://mega.nz/#!aoETEL7b!6WUe8tXeh...HHohpfYf2duoLc
First you have to download your phone's correct firmware and extract in fastboot folder , and add my autoflasher and check your sparsechunk files number and make changes according to that in autoflasher then save ..Enter your phone in fastboot mode or in bootloader and not in stock recovery and run autoflasher.
IF YOU HAVE ANY DOUBT AT TAKING RISK , CONTACT Motorola AND MAKE EVERYTHING EASY.

sharebubbles said:
Have downloaded, and tried that - but the crux appears to be the fact that my bootloader is locked and I can't access the OEM checkbox. And therefore the tool itself can't unlock or equally install TWRP.
Unless I'm missing something in it's usage.
Click to expand...
Click to collapse
Strange. This is the tool I used to unlock my bootloader.

drmuruga said:
Try this, not necessary for unlock bootloader
Recognized Contributor3,144 posts Thanks: 1,591
Quote:
Originally Posted by sheikh.sami17
but i have locked bootloader. can i flash stock firmware with locked bootloader?
YES you can flash stock Moto roms meant for your model and carrier only.
Also, Never attempt to downgrade.
In this page
http://forum.xda-developers.com/moto-x/moto-x-qa/q-how-to-flash-to-stock-firmware-t3041813
I edit and made one firmware autoflasher for my x play Indian version and flashed successfully . everybody should check sparsechunk files no in flash file of your extracted stock firmware and edit my autoflasher files according to number of sparsechunk files and flash your firmware. It is definitely safe and I flashed my firmware by this but use at your own risk .
https://mega.nz/#!aoETEL7b!6WUe8tXeh...HHohpfYf2duoLc
First you have to download your phone's correct firmware and extract in fastboot folder , and add my autoflasher and check your sparsechunk files number and make changes according to that in autoflasher then save ..Enter your phone in fastboot mode or in bootloader and not in stock recovery and run autoflasher.
IF YOU HAVE ANY DOUBT AT TAKING RISK , CONTACT Motorola AND MAKE EVERYTHING EASY.
Click to expand...
Click to collapse
I've ben used the latest rom so far why trying to flash (and failing) when I look at recovery I have a LPD23.118-10 number that matches to an earlier 5.1.1 rom (I had been upgraded to 6.0.1 via OTA updates) - do I therefore take that LPD ID to mean that I should actually use the 5.1.1 rom - I'm in the UK, so I'm assuming I'd use the UK one rather than Europe (I'm looking at roms on https://github.com/motoxplay/stock).
Thanks

Dooh!!
Looking back at what I was doing yesterday, within the mix of downloading various roms - appears that I was actually using the LPD23.118-10 and NOT the latest.
I figured, I'd give it one last whirl using the latest not expecting much - and hey presto, it's worked. Just in the process of resetting it all up again.
Thanks for everyone who contributed, and a lesson learnt about always rechecking what you attempt (and not to try to root if you're not 100% sure of what I'm doing)

sharebubbles said:
Dooh!!
Looking back at what I was doing yesterday, within the mix of downloading various roms - appears that I was actually using the LPD23.118-10 and NOT the latest.
I figured, I'd give it one last whirl using the latest not expecting much - and hey presto, it's worked. Just in the process of resetting it all up again.
Thanks for everyone who contributed, and a lesson learnt about always rechecking what you attempt (and not to try to root if you're not 100% sure of what I'm doing)
Click to expand...
Click to collapse
And also never try kingroot.

sharebubbles said:
Dooh!!
Looking back at what I was doing yesterday, within the mix of downloading various roms - appears that I was actually using the LPD23.118-10 and NOT the latest.
I figured, I'd give it one last whirl using the latest not expecting much - and hey presto, it's worked. Just in the process of resetting it all up again.
Thanks for everyone who contributed, and a lesson learnt about always rechecking what you attempt (and not to try to root if you're not 100% sure of what I'm doing)
Click to expand...
Click to collapse
Most in the threads suggesting using rsdlite or manual flash/root and you decided to use kingroot,haha.
Welcome back.

Guys I have been searching EVERYWHERE on how to unbrick my moto x play, I used kingroot and it bricked, been a week and I TRIED everything. CAN ANYONE HELP PLEASE!!!!!!
---------- Post added at 05:26 AM ---------- Previous post was at 05:14 AM ----------
Guys I have been searching EVERYWHERE on how to unbrick my moto x play, I used kingroot and it bricked, been a week and I TRIED everything. CAN ANYONE HELP PLEASE!!!!!!
Tried restoring it, deleted everything and the phone is still on bootloader (LOCKED) and i dont even know how to fix it, I know nothing on how to root, friend suggested it, downloaded it, installed it, didnt work and then i restarted my phone and now its stuck on bootloader screen and the screen has the message "Start up failed: your device didnt start up successfully. Use the software repair assisstant on computer to repair your device. Connect your device to your computer to get the Software Repair Assistant." <- Downloaded it, tried it and it was stuck on 6% on repairing, left it over night and it was still on 6%.
ALSO under the message "AP Fastboot Flash Mode(Secure) is there)

Hai same problem for my moto x play ple.......s help contact.7708892303(WhatsApp no.)

pravin kkr said:
Hai same problem for my moto x play ple.......s help contact.7708892303(WhatsApp no.)
Click to expand...
Click to collapse
Download and flash this firmware
https://mega.nz/#!H5YlDCrD!T8tAAW7nHVS-erizRiqg5-Yp_p23hKParMjjHD4diQA credits @kumeipark
Use RSD lite to flash the firmware
http://rsdlite.com/rsd-lite-download/
Moto drivers
http://motorola-mobility-en-in.custhelp.com/app/answers/detail/a_id/88481
If you have problems installing device drivers using Windows 8.1 or Windows 10 follow this guide
https://www.youtube.com/watch?v=gmw86KplqmU
And don't post your contact no. in public forums for everyone to see.

what is the decryption key for the mega link
drmuruga said:
Try this, not necessary for unlock bootloader
Recognized Contributor3,144 posts Thanks: 1,591
Quote:
Originally Posted by sheikh.sami17
but i have locked bootloader. can i flash stock firmware with locked bootloader?
YES you can flash stock Moto roms meant for your model and carrier only.
Also, Never attempt to downgrade.
In this page
http://forum.xda-developers.com/moto-x/moto-x-qa/q-how-to-flash-to-stock-firmware-t3041813
I edit and made one firmware autoflasher for my x play Indian version and flashed successfully . everybody should check sparsechunk files no in flash file of your extracted stock firmware and edit my autoflasher files according to number of sparsechunk files and flash your firmware. It is definitely safe and I flashed my firmware by this but use at your own risk .
https://mega.nz/#!aoETEL7b!6WUe8tXeh...HHohpfYf2duoLc
First you have to download your phone's correct firmware and extract in fastboot folder , and add my autoflasher and check your sparsechunk files number and make changes according to that in autoflasher then save ..Enter your phone in fastboot mode or in bootloader and not in stock recovery and run autoflasher.
IF YOU HAVE ANY DOUBT AT TAKING RISK , CONTACT Motorola AND MAKE EVERYTHING EASY.
Click to expand...
Click to collapse
provide the decryption key

Phone Stuck | Need to recover photos from internal memory

Hi All,
Due to in ternal memory full, suddenly my home button stopped working and notifications were not appearing. I tried and followed advice written in one of the websites:
"f you didn't enabled developer settings and usb debug prior to the defect, you can create an icon to call this Activity using Nova Launcher.
After installing it and launching, long press home screen, select widgets, swipe right to find Activity icon, place on empty space in your home, search for setup wizard (it changes accordingly to your native language), select .SetupWizardTestActivity and voilá."
But, now my phone is stuck in SetupWizardTestActivity loop. I desperately need to recover my photos and other data on internal memory.
Please suggest.
Additional Info:
Using Moto X play (updated to Marshmallow)
Bootloader is unlocked

Can't you just boot into safe mode and try if that works.
Boot into Safe Mode
With the phone on, press and hold the power key until the on-screen “Power off” option shows up.
Long press on the on-screen button, and select “Boot into Safe Mode.”
or if you have an unlocked bootloader you can flash TWRP and use the build in file manager to transfer the files to your sd.

anujagraj said:
Hi All,
Due to in ternal memory full, suddenly my home button stopped working and notifications were not appearing. I tried and followed advice written in one of the websites:
"f you didn't enabled developer settings and usb debug prior to the defect, you can create an icon to call this Activity using Nova Launcher.
After installing it and launching, long press home screen, select widgets, swipe right to find Activity icon, place on empty space in your home, search for setup wizard (it changes accordingly to your native language), select .SetupWizardTestActivity and voilá."
But, now my phone is stuck in SetupWizardTestActivity loop. I desperately need to recover my photos and other data on internal memory.
Please suggest.
Additional Info:
Using Moto X play (updated to Marshmallow)
Bootloader is unlocked
Click to expand...
Click to collapse
If bootloader is unlocked then recovering data is easy, I guess you have TWRP recovery if not flash twrp then pop in a sd-card boot into recovery and copy everything to the card. Done.
Edit: the above comment says the same thing, I had not noticed that .

While flashing TWRP recovery, I am getting the following message in CMD:
target reported max download size of 268435456 bytes
sending 'recovery' (8362 KB)...
OKAY [ 0.276s]
writing 'recovery'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.310s
In phone's bootloader logs, I can see: "Mismatched partition size (recovery).
Please help!

Lennyz1988 said:
Can't you just boot into safe mode and try if that works.
Boot into Safe Mode
With the phone on, press and hold the power key until the on-screen “Power off” option shows up.
Long press on the on-screen button, and select “Boot into Safe Mode.”
or if you have an unlocked bootloader you can flash TWRP and use the build in file manager to transfer the files to your sd.
Click to expand...
Click to collapse
Hi,
Safe mode is not helping. Same loop is continuing.
Also, I am not able to flash TWRP custom recovery. I am getting the following message:
(bootloader) Preflash validation failed
FAILED (remote failure)
In phone bootloader logs I can see: "Mismatched partition size (recovery).

bablu048 said:
If bootloader is unlocked then recovering data is easy, I guess you have TWRP recovery if not flash twrp then pop in a sd-card boot into recovery and copy everything to the card. Done.
Edit: the above comment says the same thing, I had not noticed that .
Click to expand...
Click to collapse
While flashing TWRP recovery, I am getting the following message in CMD:
target reported max download size of 268435456 bytes
sending 'recovery' (8362 KB)...
OKAY [ 0.276s]
writing 'recovery'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.310s
In phone bootloader logs I can see: "Mismatched partition size (recovery).
Please help!

anujagraj said:
While flashing TWRP recovery, I am getting the following message in CMD:
target reported max download size of 268435456 bytes
sending 'recovery' (8362 KB)...
OKAY [ 0.276s]
writing 'recovery'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.310s
In phone bootloader logs I can see: "Mismatched partition size (recovery).
Please help!
Click to expand...
Click to collapse
is the bootloader unlocked, did you input the code to unlock??just checking

Yes. Bootlader is unlocked with input code to unlock.

I guess adb is not authorised then. when the phone is in setup wizard connect it to pc and type 'adb devices' there will be a pop-up asking you to authorise adb. select it. the try to flash recovery again .
---------- Post added at 07:47 AM ---------- Previous post was at 07:44 AM ----------
anujagraj said:
Yes. Bootlader is unlocked with input code to unlock.
Click to expand...
Click to collapse
or simply run
fastboot boot <enter twrp name>

bablu048 said:
I guess adb is not authorised then. when the phone is in setup wizard connect it to pc and type 'adb devices' there will be a pop-up asking you to authorise adb. select it. the try to flash recovery again .
---------- Post added at 07:47 AM ---------- Previous post was at 07:44 AM ----------
or simply run
fastboot boot <enter twrp name>
Click to expand...
Click to collapse
"adb devices" is not working during Setup wizard.
Do you mean to say that I run fastboot boot <enter twrp name> during setup wizard?
Also, alternatively, will flashing a rom without clearing user data help in any way?
Thanks a lot for the help..

bablu048 said:
I guess adb is not authorised then. when the phone is in setup wizard connect it to pc and type 'adb devices' there will be a pop-up asking you to authorise adb. select it. the try to flash recovery again .
---------- Post added at 07:47 AM ---------- Previous post was at 07:44 AM ----------
or simply run
fastboot boot <enter twrp name>
Click to expand...
Click to collapse
adb and fastboot are different things and are unrelated to each other. He doesn't need adb to flash the recovery.
anujagraj said:
"adb devices" is not working during Setup wizard.
Do you mean to say that I run fastboot boot <enter twrp name> during setup wizard?
Also, alternatively, will flashing a rom without clearing user data help in any way?
Thanks a lot for the help..
Click to expand...
Click to collapse
What happens when you just clear /cache in the stock recovery?
What recovery are you trying to flash?

Lennyz1988 said:
adb and fastboot are different things and are unrelated to each other. He doesn't need adb to flash the recovery.
What happens when you just clear /cache in the stock recovery?
What recovery are you trying to flash?
Click to expand...
Click to collapse
Clear /cache in the stock recovery didn't help. Also, I am trying to flash TWRP recovery 2.8.7.

no, boot phone in fastboot mode ...then run the command
fastboot boot <recovery>
try latest TWRP

bablu048 said:
no, boot phone in fastboot mode ...then run the command
fastboot boot <recovery>
try latest TWRP
Click to expand...
Click to collapse
Hi,
I tried re-unlocking the phone using code and got following message:
(bootloader) Check 'Allow OEM Unlock' in Developer Options.
FAILED (remote failure)
finished. total time: 0.008s
Any workaround?

unlocking bootloader will wipe the data in your phone.
I thought you had unlocked.
what is the problem when you try to setup the phone ? or skip the setup
---------- Post added at 05:15 PM ---------- Previous post was at 05:12 PM ----------
anujagraj said:
Hi,
I tried re-unlocking the phone using code and got following message:
(bootloader) Check 'Allow OEM Unlock' in Developer Options.
FAILED (remote failure)
finished. total time: 0.008s
Any workaround?
Click to expand...
Click to collapse
best option now is flashing the firmware manually without wiping data.
Read this, also read a few comments after it.http://forum.xda-developers.com/showpost.php?p=65715334&postcount=43

bablu048 said:
unlocking bootloader will wipe the data in your phone.
I thought you had unlocked.
what is the problem when you try to setup the phone ? or skip the setup
---------- Post added at 05:15 PM ---------- Previous post was at 05:12 PM ----------
best option now is flashing the firmware manually without wiping data.
Read this, also read a few comments after it.http://forum.xda-developers.com/showpost.php?p=65715334&postcount=43
Click to expand...
Click to collapse
Hi,
Where can I find firmware to flash on my phone?
Also RSDLite is not able to detect phone. Can I enter commands from fastboot?
Thanks!

anujagraj said:
Hi,
Where can I find firmware to flash on my phone?
Also RSDLite is not able to detect phone. Can I enter commands from fastboot?
Thanks!
Click to expand...
Click to collapse
RSD lite needs windows 7.
Yes you have to flash manually then using fastboot commands.
firmware
Just don't use the command to erase user data. Skip it. Open the zip there will be flashfile. xml/servicefile.xml open it , you will find the list of commands to run. Or the commands can be found here.

bablu048 said:
RSD lite needs windows 7.
Yes you have to flash manually then using fastboot commands.
firmware
Just don't use the command to erase user data. Skip it. Open the zip there will be flashfile. xml/servicefile.xml open it , you will find the list of commands to run. Or the commands can be found here.
Click to expand...
Click to collapse
Just to confirm, will any firmware will work or I need to download one specific to my phone/higher version?
Also, any risks of bricking the device while flashing?

anujagraj said:
Just to confirm, will any firmware will work or I need to download one specific to my phone/higher version?
Also, any risks of bricking the device while flashing?
Click to expand...
Click to collapse
If you are on 6.0.1 then flash 6.0.1...better flash the appropriate region firmware.
There is a risk of bricking if you are downgrading and flash old gpt.bin and bootloader
As long as you are flashing proper firmware it's safe thoughi haven't done it but as you can see the comments I linked previously others have done it.

bablu048 said:
If you are on 6.0.1 then flash 6.0.1...better flash the appropriate region firmware.
There is a risk of bricking if you are downgrading and flash old gpt.bin and bootloader
As long as you are flashing proper firmware it's safe thoughi haven't done it but as you can see the comments I linked previously others have done it.
Click to expand...
Click to collapse
Hi,
I have an Indian model and got the following error on flashing contents of XT1562_LUX_RETASIA_DS_6.0_MPD24.65-18.1_cid7_subsidy-DEFAULT_CFC.xml using fastboot:
AP Fastboot Flash Mode (Secure)
failed to validate system image
ERROR: Failed to pass validation, backup to fastboot
Fastboot Reason: Fall-through from charger boot mode
Please help!

TWRP on Nougat

I saw where someone said you could flash B20 bootloader and flash TWRP on Nougat, is this true? Is anyone working on a guide for Nougat TWRP and root. On another note I thought that I read that ZTE would be bringing Wifi calling for Nougat with carries such as T-Mobile? I was unable.to find it under options and assume that it is not possible, anyone have any idea about this.
Thanks

I have an unlocked BL and recently upgraded to Nougat, but when I try to reinstall TWRP via fastboot flash method, it fails. I have tried two different versions of TWRP 3.0.3-1 & 3.0.4-1. This is the message I get.
PS C:\adb> fastboot flash recovery twrp-3.0.4-1-a7.img
target reported max download size of 536870912 bytes
sending 'recovery' (14472 KB)...
OKAY [ 0.332s]
writing 'recovery'...
FAILED (remote: unknown command)
finished. total time: 0.363s
Any ideas?

jim262 said:
I have an unlocked BL and recently upgraded to Nougat, but when I try to reinstall TWRP via fastboot flash method, it fails. I have tried two different versions of TWRP 3.0.3-1 & 3.0.4-1. This is the message I get.
PS C:\adb> fastboot flash recovery twrp-3.0.4-1-a7.img
target reported max download size of 536870912 bytes
sending 'recovery' (14472 KB)...
OKAY [ 0.332s]
writing 'recovery'...
FAILED (remote: unknown command)
finished. total time: 0.363s
Any ideas?
Click to expand...
Click to collapse
I got TWRP 3.0.4 installed (as well as 3.0.3-1)... It installed sucessfully via Fastboot for me, I even flashed SU, but I couldn't get my phone to boot into the OS (tried with and without SU).......It just hung at the boot pre-boot screen (where it warns you the bootloader is unlocked). I'd restart it, and it always hangs at that screen..... Only way to fix it was to boot back into TWRP, revert back to B29 (using DrakenFX guide) and then update to Nougat again. I spent about 16 hours straight working on this on Tuesday, before I gave up and decided to keep it stock until a custom ROM comes out, soon (Z.A.D. v.4), hopefully?

I have an issue where I installed B15 but whenever I boot my phone, it hangs on the Linux Tux logo. Any fix?

xDaDeevellopar said:
I have an issue where I installed B15 but whenever I boot my phone, it hangs on the Linux Tux logo. Any fix?
Click to expand...
Click to collapse
You probably pushed the power button to "Start"? Try letting it sit there about 10-15 seconds, if it won't boot...This is the exact same problem I had. I had to go back to B29, then do the update again. There is now a B15 "return to stock" walk-through, that may be the quicker route.....But I know returning to B29, turning on OEM Unlock in Dev options and then taking the update via your SD card was what I did (3 times in one day).

Flash signed TWRP with tennear's tool (axon7tool):
https://forum.xda-developers.com/axon-7/development/axon7tool-flash-backup-boot-recovery-t3514254
https://we.tl/dv78KwQZCY
and then follow this guide:
https://forum.xda-developers.com/axon-7/how-to/guide-how-to-unlock-bootloader-stay-t3461165
3 files and 10 minutes of your time for TWRP + unlocked bootloader

bornlivedie said:
Flash signed TWRP with tennear's tool (axon7tool):
https://forum.xda-developers.com/axo...overy-t3514254
https://we.tl/dv78KwQZCY
and then follow this guide:
https://forum.xda-developers.com/axo...-stay-t3461165
3 files and 10 minutes of your time for TWRP + unlocked bootloader
Click to expand...
Click to collapse
Those 2 XDA links don't work, take me to a generic XDA 404 error page (on both)...the WeShare page worked.

tele_jas said:
Those 2 XDA links don't work, take me to a generic XDA 404 error page (on both)...the WeShare page worked.
Click to expand...
Click to collapse
That's because I copypasted lol
https://forum.xda-developers.com/axon-7/development/axon7tool-flash-backup-boot-recovery-t3514254
https://forum.xda-developers.com/axon-7/how-to/guide-how-to-unlock-bootloader-stay-t3461165

bornlivedie said:
That's because I copypasted lol
https://forum.xda-developers.com/axon-7/development/axon7tool-flash-backup-boot-recovery-t3514254
https://forum.xda-developers.com/axon-7/how-to/guide-how-to-unlock-bootloader-stay-t3461165
Click to expand...
Click to collapse
If my bootloader is already unlocked, can I skip that part (the 2nd link)?? Or is it necessary?

tele_jas said:
If my bootloader is already unlocked, can I skip that part (the 2nd link)?? Or is it necessary?
Click to expand...
Click to collapse
Those steps are meant to unlock the bootloader.
You don't need any of it. You already have TWRP (skip step 1) and bootloader unlocked (skip step 2) so yeah...
What do you want exactly?

bornlivedie said:
Those steps are meant to unlock the bootloader.
You don't need any of it. You already have TWRP (skip step 1) and bootloader unlocked (skip step 2) so yeah...
What do you want exactly?
Click to expand...
Click to collapse
My bootloader is unlocked (back when ZTE actually provided the unlocking)....adb fastboot works on my phone as well and I've flashed TWRP (3.0.4 and 3.0.3-1) and it's booted into TWRP, but I cannot boot into the actual OS...My phone goes all black and just hangs there, I think this may be booting directly into EDL mode and not the OS? I can plug my phone into the computer and my computer makes noises as if a USB device has been attached, but my screen is completely black. If I push the start button while the phone is booting (to bypass the bootloader is unlocked warning screen), I boot to a small penguin screen.
The only thing I can do from there is revert back to stock B29, then update back to stock B15.
I want to be able to install TWRP, root my phone, on Nougat, and be able to use my phone too?

tele_jas said:
My bootloader is unlocked (back when ZTE actually provided the unlocking)....adb fastboot works on my phone as well and I've flashed TWRP (3.0.4 and 3.0.3-1) and it's booted into TWRP, but I cannot boot into the actual OS...My phone goes all black and just hangs there, I think this may be booting directly into EDL mode and not the OS? I can plug my phone into the computer and my computer makes noises as if a USB device has been attached, but my screen is completely black. If I push the start button while the phone is booting (to bypass the bootloader is unlocked warning screen), I boot to a small penguin screen.
The only thing I can do from there is revert back to stock B29, then update back to stock B15.
I want to be able to install TWRP, root my phone, on Nougat, and be able to use my phone too?
Click to expand...
Click to collapse
Then follow this:
https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514
and flash this:
https://forum.xda-developers.com/showpost.php?p=68873482&postcount=2
I think I know what happened to you... did you by any chance allow system modifications in TWRP? That makes the OS bootloop if you have Nougat.

bornlivedie said:
Then follow this:
https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514
and flash this:
https://forum.xda-developers.com/showpost.php?p=68873482&postcount=2
I think I know what happened to you... did you by any chance allow system modifications in TWRP? That makes the OS bootloop if you have Nougat.
Click to expand...
Click to collapse
The MiFlash program found my phone, but failed every time I ran it.. So, I just bit the bullet and downloaded the latest TWRP 3.0.4-1 and flashed that.....And it worked! I then flashed SU, my fonts and changed my Emoji's....I'm about there with customization, and it's all booting up just fine!
But, yes the first few times I did allow system modifications......But I also did this last time too and it's working fine?

my h872 is brick,even though the download mode and system,anyone could help me?

my h872 is brick,even though the download mode and system,now i can only boot into the fastboot,how can i get my phone work?
i have tried fastboot flash command to flash boot or recovery ,etc,it always show:
sending 'bootloader'
ok,
target reported max download size of 536870912 bytes
sending 'laf' (29916 KB)...
OKAY [ 1.029s]
writing 'laf'...
FAILED (remote: unknown command)
finished. total time: 1.050s
might my drives is not proper? i have change the usb point or another device,it always is this...

小阿瑟 said:
my h872 is brick,even though the download mode and system,now i can only boot into the fastboot,how can i get my phone work?
i have tried fastboot flash command to flash boot or recovery ,etc,it always show:
sending 'bootloader'
ok,
target reported max download size of 536870912 bytes
sending 'laf' (29916 KB)...
OKAY [ 1.029s]
writing 'laf'...
FAILED (remote: unknown command)
finished. total time: 1.050s
might my drives is not proper? i have change the usb point or another device,it always is this...
Click to expand...
Click to collapse
How'd you get here? (Your phone bricked)

christopherrrg said:
How'd you get here? (Your phone bricked)
Click to expand...
Click to collapse
i use the twrp flash a wrong recover or maybe wrong root？mostly it is ，

小阿瑟 said:
i use the twrp flash a wrong recover or maybe wrong root？mostly it is ，
Click to expand...
Click to collapse
I just asked because the logs show that your LAF partition isn't flashing and from what I've been reading so far about the LAF partition is that it is a very fragile thing.
Have you tried a factory kdz with LGUP?

christopherrrg said:
I just asked because the logs show that your LAF partition isn't flashing and from what I've been reading so far about the LAF partition is that it is a very fragile thing.
Have you tried a factory kdz with LGUP?
Click to expand...
Click to collapse
what a amazing ! i got another‘s help,now i can boot into the twrp,
but after i install the AospExtended, it just play the aex booting video,how many times i erase all date include system and date,cache,etc.
now ,iwant to konw how to get it into a system

Find stock.kdz to flash using LGUP, reflash TWRP using fast boot commands. Should boot correctly after stock .kdz is applied. Once confirmed your phone works correctly.. Boot into TWRP factory reset, and wipe partition, then attempt to flash your choice of custom ROM.

小阿瑟 said:
what a amazing ! i got another‘s help,now i can boot into the twrp,
but after i install the AospExtended, it just play the aex booting video,how many times i erase all date include system and date,cache,etc.
now ,iwant to konw how to get it into a system
Click to expand...
Click to collapse
Hi mate,
I got into the same problem as u did, i hope you solved your problem by now. Will share to me how you solve it?
Did u flash twrp via fastboot? If u do, can you share to me the command u used?
Thanks alot for your help.

spaceantz said:
Hi mate,
I got into the same problem as u did, i hope you solved your problem by now. Will share to me how you solve it?
Did u flash twrp via fastboot? If u do, can you share to me the command u used?
Thanks alot for your help.
Click to expand...
Click to collapse
Download mode via holding VOL+ and plug in GOOD USB-C cable into Windows 10 laptop/desktop with LG USB drivers, Uppercut, LGUP installed. Then KDZ 10E image to bring back to stock Nougat (losing all root, data, and it'll force encryption): http://firmware-up.com/system/files/basicpr/8d0e1fc8/H87210e_00_0322.kdz

LG G6 H872 stucked in Download mode with 5 dots
My phone LG G6 H872 got stucked in download mode with 5 dots in the process of getting it rooted, pls anyone with information on how to get it out of this should pls help. you can mail me direct on [email protected]