I have not recieved oreo for paraguay UPO csc.. but i have multicsc rom for PEO peru... i have installed it successfully.. device status and everything is official but csc did not change... will i get the ota updates? If not then how do i update my firmware when a new update for peru is available... or how can i simly change csc... my sim card has no effect on chosing the csc as i dont live in peru or paraguay.
Thanks.
Bilal billi said:
I have not recieved oreo for paraguay UPO csc.. but i have multicsc rom for PEO peru... i have installed it successfully.. device status and everything is official but csc did not change... will i get the ota updates? If not then how do i update my firmware when a new update for peru is available... or how can i simly change csc... my sim card has no effect on chosing the csc as i dont live in peru or paraguay.
Thanks.
Click to expand...
Click to collapse
you can flash a peru firmware oreo . from sammobile.
StonebridgeGr said:
you can flash a peru firmware oreo . from sammobile.
Click to expand...
Click to collapse
I have flashed peru firmware with all four files ap bl csc etc. But still i have UPO as active csc rather than PEO.
Bilal billi said:
I have flashed peru firmware with all four files ap bl csc etc. But still i have UPO as active csc rather than PEO.
Click to expand...
Click to collapse
why you want peru csc? you can flash csc selection and select peru csc . through twrp recovery
StonebridgeGr said:
why you want peru csc? you can flash csc selection and select peru csc . through twrp recovery
Click to expand...
Click to collapse
And then i will flash peru firmware through odin and twrp will convert to stock and still i have peru csc?
Bilal billi said:
And then i will flash peru firmware through odin and twrp will convert to stock and still i have peru csc?
Click to expand...
Click to collapse
yes just flash peru firmware .. through odin
StonebridgeGr said:
why you want peru csc? you can flash csc selection and select peru csc . through twrp recovery
Click to expand...
Click to collapse
StonebridgeGr said:
yes just flash peru firmware .. through odin
Click to expand...
Click to collapse
Thanks buddy... ?
Bilal billi said:
Thanks buddy...
Click to expand...
Click to collapse
try it and reply , hope everything will be fine .
Bilal billi said:
And then i will flash peru firmware through odin and twrp will convert to stock and still i have peru csc?
Click to expand...
Click to collapse
Thanks for the information, the same thing happens to me, I upgraded my S8 to Oreo with a firmware from Sammobile PEO from Peru and when I started the phone, I got an app from Paraguay, it tells me the system is UPO, how should I make it to stay in PEO only?
I inform you that my phone is from Peru and it is Nougat, Movistar SAM.
Can you explain the procedure step by step? I already have the PEO Firmware files.
Kevinat said:
Thanks for the information, the same thing happens to me, I upgraded my S8 to Oreo with a firmware from Sammobile PEO from Peru and when I started the phone, I got an app from Paraguay, it tells me the system is UPO, how should I make it to stay in PEO only?
I inform you that my phone is from Peru and it is Nougat, Movistar SAM.
Can you explain the procedure step by step? I already have the PEO Firmware files.
Click to expand...
Click to collapse
I didnt tried to change csc as it was a risk. My device is never rooted. So i kept running peo oreo on my upo s8. As i had said csc is still upo after peo firmware. And the disadvantage is we will not recieve ota updates after doing this. Good news is that oreo for paraguay upo is finally available through ota and also on sammobile. What i have done two days ago is that i have installed AQL5 UPO nougat firmware and got the ota oreo for paraguay update as soon as device was ready to use. So i am now successfully running oreo on official upo device. You can also flash upo oreo directly but i prefer u to install nougat aql5 for paraguay from sammobile and then ota update to oreo. Also go to develepor options and enable unclock bootloader so in case of failure your device dont get an error. And the your csc didnt change because we have multi csc firmwares haveing all cscs. Enjoy oreo. ?
I understand you but I want it to be in PEO, does anyone know the way to leave my S8 in PEO? Because it comes out in UPO but I have installed the PEO firmware.
Kevinat said:
I understand you but I want it to be in PEO, does anyone know the way to leave my S8 in PEO? Because it comes out in UPO but I have installed the PEO firmware.
Click to expand...
Click to collapse
StonebridgeGr has told the procedure.. i didn't perform as i didn't need to. U can try that which he explained in previous comments. ?
Related
Hi. I am kinda new to S4. I bought my phone in baltic region but my phone has CSC EVR (its UK). As they are delaying updates a lot what will happen if I will download firmware for SEB region from Sammobile and flash it via Odin? Is there any danger to brick the phone? Will CSC then will change to SEB?
Thanks in advance.
Leinger said:
Hi. I am kinda new to S4. I bought my phone in baltic region but my phone has CSC EVR (its UK). As they are delaying updates a lot what will happen if I will download firmware for SEB region from Sammobile and flash it via Odin? Is there any danger to brick the phone? Will CSC then will change to SEB?
Thanks in advance.
Click to expand...
Click to collapse
U can download firmware for same variant and install it using Odin no plm
for more info on CSC etc u go to the banner link on my signature
123hiten said:
U can download firmware for same variant and install it using Odin no plm
for more info on CSC etc u go to the banner link on my signature
Click to expand...
Click to collapse
Worked like a charm :good: Thanks mate!
Hi, I want to flash my galaxy as fedup with waiting for updates.
I got BTU, UK unbranded, unlocked S4
I am polish, so thinking flash it to polish firmware as they get it fast.
GT-I9505 XEO I9505XXUBMEA thats the one I want go for
Can someone tell what is it ? is it network firmware or unbranded?
I would go for it only if I can change CSC code to XEO, so I can get OTA updates.
If not I will keep waiting for BTU
And Dont really want XEO polish carier firmware, as I can flash to Three UK BTU network, would be the same and dont have to change CSC.
So, main questions are
What it is XEO ? what network ?
Can I flash it + change code to CSC all safe?
and how to do it ? Odin
Thank You.
Kris
matale0 said:
Hi, I want to flash my galaxy as fedup with waiting for updates.
I got BTU, UK unbranded, unlocked S4
I am polish, so thinking flash it to polish firmware as they get it fast.
GT-I9505 XEO I9505XXUBMEA thats the one I want go for
Can someone tell what is it ? is it network firmware or unbranded?
I would go for it only if I can change CSC code to XEO, so I can get OTA updates.
If not I will keep waiting for BTU
And Dont really want XEO polish carier firmware, as I can flash to Three UK BTU network, would be the same and dont have to change CSC.
So, main questions are
What it is XEO ? what network ?
Can I flash it + change code to CSC all safe?
and how to do it ? Odin
Thank You.
Kris
Click to expand...
Click to collapse
as far as i tried you cant change csc with flashing . unless you flash single csc not multi.
only way is to root with auto root than change csc wit csc changer and then flash desired firmware with odin.
xeo looks like it is simfree so its just general for poland
madman_cro said:
as far as i tried you cant change csc with flashing . unless you flash single csc not multi.
only way is to root with auto root than change csc wit csc changer and then flash desired firmware with odin.
xeo looks like it is simfree so its just general for poland
Click to expand...
Click to collapse
can i get singles files for odin? CSC XEO ?
thx
matale0 said:
can i get singles files for odin? CSC XEO ?
thx
Click to expand...
Click to collapse
i didnt find any searching on net so i guess no. they usualy pack 20+- csc together
there was some talk of chcnging csc with flashing twice with odin without auto reboot. but that didnt work for me.
madman_cro said:
i didnt find any searching on net so i guess no. they usualy pack 20+- csc together
there was some talk of chcnging csc with flashing twice with odin without auto reboot. but that didnt work for me.
Click to expand...
Click to collapse
i try that http://www.hotfile.com/dl/229983758/7d4d060/I9505XXUBMEA_I9505OXXBMF1_XEO.zip.html
matale0 said:
i try that http://www.hotfile.com/dl/229983758/7d4d060/I9505XXUBMEA_I9505OXXBMF1_XEO.zip.html
Click to expand...
Click to collapse
try it. remember if you want to change csc with single flash(wich i dont think so ,that worked on s2) after first boot reboot to recovery and wipe data/chache. in recovery you will see wich csc applied.
https://play.google.com/store/apps/details?id=com.manniakk.cscselector
Can someone help me out as I am new to all of this...
I am using a Samsung galaxy tab 7.0 (p2610), and I flashed a jelly bean update successfully using odin. I am not rooted.
I have a system update in the notifications window that is stuck there, that is not working (process fails), this is due to the csc code being in great britain.
I am in Canada, I have Odin ready to go, can someone please show me how to change the CSC of my device to Canada?
Where do I go to download the appropriate file? After I assume I load it up in Odin with device in recovery mode, and flash using the "CSC" option in Odin correct?
Any help would be great.
Hello,
i have a belgian S7 edge and flashed a while ago the british nougat beta firmware.
yesterday i wanted to go back to my countries own firmware but was still marshmallow on sammobile.
so i installed this version using odin.
but when i did a recovery and wiped everything it installed german apps and the language was in german.
i tought that my CSC wasnt correct so i only flashed the CSC from the marshmallow rom for my country but the problem remains.
now i have multi CSC but i only want one and that is CSC PRO (Belgium Proximus)
how can i fix this? i tried the code with *#27*imei# but nothing works?
because of this problem i cannot use VOLTE on my own operator.
You need to flash a totally different CSC that is not multi csc with re partiton enabled in Odin... then flash the csc you want to be on again with re partition enabled in Odin.
And which csc shpuld i choose for example?
_DrG_ said:
You need to flash a totally different CSC that is not multi csc with re partiton enabled in Odin... then flash the csc you want to be on again with re partition enabled in Odin.
Click to expand...
Click to collapse
And which csc should i choose for example?
nielsvg said:
And which csc should i choose for example?
Click to expand...
Click to collapse
Try flashing a KSA CSC firmware (Saudi Arabia) and then flash the CSC firmware you want
I also have the same problem. Last month I flashed a BTU firmware because I haven't got the Nougat update yet here in the Philippines and I really wanted to try out the Nougat update as soon as it started rolling out in UK. This month the Nougat update finally rolled out here in the Philippines so I decided to go back to Philippine firmware which is XTC. After flashing I got the Thailand CSC (THL) even though I flashed the Philippine firmware (XTC). My s7e is not rooted and I have no plans on rooting it. Can someone help me go back to Philippine CSC? Thanks in advance.
Piravinth said:
Try flashing a KSA CSC firmware (Saudi Arabia) and then flash the CSC firmware you want
Click to expand...
Click to collapse
And this will surely work because on sammobile forum they say it isnt possible to change it back
nielsvg said:
And this will surely work because on sammobile forum they say it isnt possible to change it back
Click to expand...
Click to collapse
The CSC you are trying to flash maybe part of the same firmware so you have to change to another csc entirely. Try KSA CSC firmware and flash the PRO CSC firmware
I am in the UK and my phone orgibally had XEU CSC and I wanted to flash the BTU CSC to get Nougat however because BTU and XEU were in the same firmware this meant when I flashed the BTU CSC I still had the XEU CSC.
So I flashed KSA CSC and flashed BTU CSC and now I have BTU
Piravinth said:
The KSA CSC wouldn't be part of the multi-csc you have so if you flash that and flash the firmware that has the CSC you want you should get that CSC
I am in the UK and had the XEU CSC and wanted to flash the BTU CSC to get Nougat however because BTU is part of a multi-csc this meant when I flashed the BTU CSC I still had the XEU CSC. I flashed KSA CSC and flashed BTU CSC and now I have BTU
Click to expand...
Click to collapse
Do i have to turn on re partitioning when flashing ksa csc and have i turn it on again when flashing pro csc ?
nielsvg said:
Do i have to turn on re partitioning when flashing ksa csc and have i turn it on again when flashing pro csc ?
Click to expand...
Click to collapse
Yes
Piravinth said:
Yes
Click to expand...
Click to collapse
Final check to be definitive sure
So when finally flashing pro software with pro csc re partitioning had to be turned on
nielsvg said:
Final check to be definitive sure
So when finally flashing pro software with pro csc re partitioning had to be turned on
Click to expand...
Click to collapse
Yes that's what I did and to receive OTA update wipe cache and data, I did it after flashing ksa and BTU just to be sure
Piravinth said:
Yes that's what I did and to receive OTA update wipe cache and data, I did it after flashing ksa and BTU just to be sure
Click to expand...
Click to collapse
ok thx will try it now
nielsvg said:
ok thx will try it now
Click to expand...
Click to collapse
Also flash the KSA firmware with reparation enabled
Piravinth said:
Also flash the KSA firmware with reparation enabled
Click to expand...
Click to collapse
never had a problem with odin but now first time it said failed.
and now second and thirthed time it didnt do anything. it kept saying setupconnection but nothing else happened.
nielsvg said:
never had a problem with odin but now first time it said failed.
and now second and thirthed time it didnt do anything. it kept saying setupconnection but nothing else happened.
Click to expand...
Click to collapse
Are you using the latest version, v 3.12.3?
Under options in odin the following should be ticked;
Auto Reboot
Re-Partion
F.Reset Time
Piravinth said:
Are you using the latest version, v 3.12.3?
Under options in odin the following should be ticked;
Auto Reboot
Re-Partion
F.Reset Time
Click to expand...
Click to collapse
thx was using older model. i use it a lot but now i am having doubts.
do i only have to add the AP file or do i have to choose the AP file and the CSC file?
nielsvg said:
thx was using older model. i use it a lot but now i am having doubts.
do i only have to add the AP file or do i have to choose the AP file and the CSC file?
Click to expand...
Click to collapse
I added the files into ; BL, AP, CP and CSC. For CSC I didn't choose the home_CSC but the other one
Piravinth said:
I added the files into ; BL, AP, CP and CSC. For CSC I didn't choose the home_CSC but the other one
Click to expand...
Click to collapse
It didnt work. Still on german csc. I did a complete wipe in recovery mode but it is still the same.
I didnt do thuis procedure when i flashed the ksa version
nielsvg said:
It didnt work. Still on german csc. I did a complete wipe in recovery mode but it is still the same.
I didnt do thuis procedure when i flashed the ksa version
Click to expand...
Click to collapse
What is going on?
When flashing the KSA CSC firmware, did you add the BL,AP,CP AND CSC files and did you choose the csc file and not the home csc?
Did you follow the same step when flashing PRO CSC firmware?
As you know, Oreo is out in U.K.
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935F/BTU/download/G935FXXU2ERD5/217550/
I have G-935F and it is from Vietnam. Is it possible to flash the official U.K. release and use it without any problems?
yes you can , i have been flashing firmware of different country to my s7 edge duos .
you just need to be sure chipset and model number are same.
Between you can flash s7 edge single sim firmware to dual sim.
P.S. can you upload the btu oreo firmware to google drive and share. Sammobile server is slow here.
Thanks
kwaasung said:
yes you can , i have been flashing firmware of different country to my s7 edge duos .
you just need to be sure chipset and model number are same.
Between you can flash s7 edge single sim firmware to dual sim.
P.S. can you upload the btu oreo firmware to google drive and share. Sammobile server is slow here.
Thanks
Click to expand...
Click to collapse
Thank you for the info! Sadly I am downloading the firmware from the sammobile.com 'slug' slow too.
Havik1453 said:
Thank you for the info! Sadly I am downloading the firmware from the sammobile.com 'slug' slow too.
Click to expand...
Click to collapse
Great . Can you upload it to google drive after downloading.
kwaasung said:
Great . Can you upload it to google drive after downloading.
Click to expand...
Click to collapse
Since it is from Sammobile.com, I don't think it is right to upload it to other site because it's their files. You can get Premium Service for faster downlad tho.
kwaasung said:
yes you can , i have been flashing firmware of different country to my s7 edge duos .
you just need to be sure chipset and model number are same.
Between you can flash s7 edge single sim firmware to dual sim.
P.S. can you upload the btu oreo firmware to google drive and share. Sammobile server is slow here.
Thanks
Click to expand...
Click to collapse
How about Galaxy S7 edge SM-G935FD?
can as well? TQ..
komok said:
How about Galaxy S7 edge SM-G935FD?
can as well? TQ..
Click to expand...
Click to collapse
yes you can , i have been flashing single sim firmware to dual sim s7 edge.
both sim works .
I can't align the BTU CSC once I installed the firmware for future OTA updates. I did everything I used to do but I keep having the ITV CSC.
I tried installing the firmware with Odin 3 times...
Tommolo said:
I can't align the BTU CSC once I installed the firmware for future OTA updates. I did everything I used to do but I keep having the ITV CSC.
I tried installing the firmware with Odin 3 times...
Click to expand...
Click to collapse
Dial *#1234# if your csc is "OXA" you are fine its multi csc from different countries. I have ITV csc too by the way.
meawww said:
Dial *#1234# if your csc is "OXA" you are fine its multi csc from different countries. I have ITV csc too by the way.
Click to expand...
Click to collapse
It says OXA but if I open the Phone Info App it says that the active CSC is the ITV one. And I won't receive future ota updates if it doesn't apply the BTU/OXA one.
Tommolo said:
It says OXA but if I open the Phone Info App it says that the active CSC is the ITV one. And I won't receive future ota updates if it doesn't apply the BTU/OXA one.
Click to expand...
Click to collapse
Maybe it will get ota from multi csc too as OXA or maybe it will fixed ota from current ITV. We will find out if theres an ota update to any of those country listed in OXA csc which are france uk germany italy poland
I got same problem with You guys but i found solution, i downloaded firmware TCL portugal install via odin boot up to first settings turn off my phone and go to recovery mode again wipe cache and data, go to download mode and install BTU. If You wanna faster download via samobile use tool samfirm and it will be faster
https://forum.xda-developers.com/showpost.php?p=76398677&postcount=4037
use this link folks and download official oreo firmware BTU and install it through ODIN.
Thats it
Tommolo said:
It says OXA but if I open the Phone Info App it says that the active CSC is the ITV one. And I won't receive future ota updates if it doesn't apply the BTU/OXA one.
Click to expand...
Click to collapse
it´s because of Mulit-CSC.. when you don´t wipe and factory reset, you stay on your CSC.. so ITV.. when you want BTU ota´s, you need to wipe your S7 complete including factory reset
raider2k9 said:
it´s because of Mulit-CSC.. when you don´t wipe and factory reset, you stay on your CSC.. so ITV.. when you want BTU ota´s, you need to wipe your S7 complete including factory reset
Click to expand...
Click to collapse
That's what I did. Three times. With Odin and from the stock recovery too.
Tommolo said:
It says OXA but if I open the Phone Info App it says that the active CSC is the ITV one. And I won't receive future ota updates if it doesn't apply the BTU/OXA one.
Click to expand...
Click to collapse
Since BTU and ITV are in same OXA CSC file you must first flash a non OXA firmware like NEE , EUR, DBT and then reflash the BTU firmware.
OXA is multi csc file. ALL in same group wont change from ITV.
Tommolo said:
That's what I did. Three times. With Odin and from the stock recovery too.
Click to expand...
Click to collapse
I forgot the important Point so far.. you Need to boot first time with simcard for BTU region to set CSC to BTU.. because multi-CSC changes CSC after wipe and only when simcard from the other Country is inserted
---------- Post added at 02:14 PM ---------- Previous post was at 02:12 PM ----------
DBT is a OXA Firmware so far.. on my S8 it was the Point.. S7 DBT isn´t OXA?
how to root official oreo rom my samsung helath not work , i need one way to root official oreo uk , please help me
I can't flash with odin
Good afternoon, someone can help me, try to flash the rom btu and the odin tells me pass but when restarting there is no change of android. Now I have android 7 region DBT and probe flashing with home_csc and csc and with the same thing happens, no change. Greetings and thanks
Use Odin 3.13 and uncheck F. Reset Time.
I had XEO csc. I've used HOME_CSC_OXA.
Installation was a success. It didn't erase my data. 0x0
Will see how it goes
Hi guys finally samsung realesed oreo update for russian 935fd model last night and russia support volte so can i flash that firmware on my india 935fd model ?
Astra441 said:
Hi guys finally samsung realesed oreo update for russian 935fd model last night and russia support volte so can i flash that firmware on my india 935fd model ?
Click to expand...
Click to collapse
Yes. Just use HOME_CSC of latest INS firmware.
ajhavery said:
Yes. Just use HOME_CSC of latest INS firmware.
Click to expand...
Click to collapse
in ins still noguat mate but russia now have oreo thats why i am asking
Astra441 said:
in ins still noguat mate but russia now have oreo thats why i am asking
Click to expand...
Click to collapse
Yes. You can use Nougat CSC with OREO AP, BL and CP.
Hey what's up can you install it? How do you feel with battery? Thanks
Astra441 said:
in ins still noguat mate but russia now have oreo thats why i am asking
Click to expand...
Click to collapse
hey did anyone install the Russian firmware ? Does it support volte ?
_HUNT3R_ said:
hey did anyone install the Russian firmware ? Does it support volte ?
Click to expand...
Click to collapse
i am unable to download it as i dnt find any fast links till now
Astra441 said:
i am unable to download it as i dnt find any fast links till now
Click to expand...
Click to collapse
I am downloading it from sammobile right now . I'll install it later today .
---------- Post added at 10:00 AM ---------- Previous post was at 09:56 AM ----------
Astra441 said:
Hi guys finally samsung realesed oreo update for russian 935fd model last night and russia support volte so can i flash that firmware on my india 935fd model ?
Click to expand...
Click to collapse
Are you sure Russia has Volte ??
Use this link for faster download.
http://www.mediafire.com/file/oah25feh6x4m3g5/G935FXXU2ERE8_G935FOXE2ERE8_SER.zip
Don't install the Russian S7 Edge firmware if you expect volte works .Volte Is Not Working. Although i did notice that the phone works a bit smoother than it does normally .
_HUNT3R_ said:
Don't install the Russian S7 Edge firmware if you expect volte works .Volte Is Not Working. Although i did notice that the phone works a bit smoother than it does normally .
Click to expand...
Click to collapse
I already mentioned it. Flash HOME_CSC of INS firmware.
See the screenshot.
ajhavery said:
I already mentioned it. Flash HOME_CSC of INS firmware.
See the screenshot.
Click to expand...
Click to collapse
Home_csc of INS Android 7.0 works with the Russian Firmware or UK firmware ?
_HUNT3R_ said:
Home_csc of INS Android 7.0 works with the Russian Firmware or UK firmware ?
Click to expand...
Click to collapse
Yes. CSC is independent of AP or BL choice. I've tried it with both BTU and SER firmware and works with both.
AP - Oreo
BL - OREO
CP - OREO (Can try Nougat INS too for Indian modem. I haven't tried it though)
CSC - Nougat INS HOME_CSC
ajhavery said:
yes. Csc is independent of ap or bl choice. I've tried it with both btu and ser firmware and works with both.
Ap - oreo
bl - oreo
cp - oreo (can try nougat ins too for indian modem. I haven't tried it though)
csc - nougat ins home_csc
Click to expand...
Click to collapse
bro it failed , please help
_HUNT3R_ said:
bro it failed , please help
Click to expand...
Click to collapse
You need ODIN 3.13.1 to be able to flash this. And original or equivalent Samsung Cable.
Previous versions of ODIN don't work.
Use the below setup:
AP - AP_G935FXXU2ERE8_CL13438344_QB18102056_REV00_user_low_ship_meta.tar.md5
BL - BL_G935FXXU2ERE8_CL13438344_QB18102056_REV00_user_low_ship.tar.md5
CP - CP_G935FXXU2ERD6_CP9567704_CL13438344_QB17934979_REV00_user_low_ship.tar.md5
CSC - HOME_CSC_ODD_G935FODD2DRAG_CL12785220_QB16560289_REV00_user_low_ship.tar.md5
The above setup worked for me thrice.
ajhavery said:
You need ODIN 3.13.1 to be able to flash this. And original or equivalent Samsung Cable.
Previous versions of ODIN don't work.
Use the below setup:
AP - AP_G935FXXU2ERE8_CL13438344_QB18102056_REV00_user_low_ship_meta.tar.md5
BL - BL_G935FXXU2ERE8_CL13438344_QB18102056_REV00_user_low_ship.tar.md5
CP - CP_G935FXXU2ERD6_CP9567704_CL13438344_QB17934979_REV00_user_low_ship.tar.md5
CSC - HOME_CSC_ODD_G935FODD2DRAG_CL12785220_QB16560289_REV00_user_low_ship.tar.md5
The above setup worked for me thrice.
Click to expand...
Click to collapse
means if i use home csc so this give me volte main thing i want ...... as samsung delay more days to provide firmware to india