I need your help! I have a Yoga tab 3 Pro Wifi.
Short story: It started showing battery level 1% at all times. Even while charging.
Lenovo told me its a firmware bug. Please update. Well, I cant update the tablet if it is at 1% battery. Lenovo couldnt help.
So, without warranty I decide to flash it with stock rom. Big mistake.
I have been using Intel Platform Flash Tool for two days and flashed Blank, 1st stage factory, 2nd stage factory. It took some figuring out, but at last i got it done.
I´dont know if I got the right firmware but I think so (Yt3-X90F ENG). However, I get it to boot into OS, the battery is still 1% so maybe battery is at fault. But I cant light up my screen anymore.
It works though. When I boot it up it works. But when I lock it, or it times out I cant get it to light up again and its sluggish. Im not sure if I flashed it correctly.
First DNX mode: Flash Blank
Then Bootloader mode: Flash 1st stage Factory
(Then 2nd stage)
What am I missing?
Where did u get those firmware ? Share links please.
Related
After a year of playing with Galaxy S3 I got bored with constant flashing and well, I never got used to onscreen keyboard.
I wanted a phone that will just work and decided to go for a Droid Pro+. Device was form Germany as there is no official distribution in Poland. It worked like a charm for two weeks till just now.
While playing with it (changing ringtones and stuff) I got several messages about services failing - com.service.usb, com.service.google, etc.) As it happened before (but only com.service.usb) I restarted it - in a normal way - power button and then Reboot. It rebooted and after that got stuck on M logo.
The firmware was as stock as it could be. No modifications were made. What's strange, the device can't be hard resetted. I can hold the power button for several minutes and it won't turn off.
Recovery mode works, but wiping does not help. Fastboot also works, but RSD Lite shows N/A in every column of Device info. I flashed GB 2.3.6 (5.5.1Q-110_ELW-TA-36-65-release-keys-signed.Retail-en-GB.tar) found on XDA. The rom itself should be OK, as no functionality was lost (recovery and fastboot), but the device still hangs on the boot logo. Device info is still N/A.
Could it be a hardware malfunction or is there something else I could try? Warranty is probably not an option since as i mentioned there is no official distribution in Poland. Any help would be appreciated since I'm out of ideas by now... Also, does anyone know if the battery is charged when in Recovery or fastboot mode? Connecting to a charger ends up on the M logo. And because very few people in Poland have Moto devices I have no other way to recharge the battery.
Hallo,
i hope someone can help me here.
After a low battery my phone doesnt turn on any more. After some research i thought it might by the "death battery problem". So i but the phone on Laptop Charge port for 6 hours and i got it booted in to system.
But only for some seconds and it turned of again. So i decided to buy a new battery. Installed it and tried to boot. Sometimes it bootet in to System, sometime just got Blackscreen. I tried hard reset in it showed some errors. That was some days ago. Now it boots and everytime blackscreen. I tried also longer presses like 10 secs and 60secs. I tried fast press for hard reset with boot logo. I have no detection on Windows. I never rooted the phone and it has still stock rom. Must be the latest kitkat 4.4.2 i guess. I checked every cable. No charge led or logo.
Hey dude check out my video https://youtu.be/rpmbk9RFE_U there is step by step instruction how to reflash your rom... Just watch im here for any questions.
Hi
I am stuck with Pulsing blue LED and the "Powered by Android" screen,
have access to both the recovery and the download Mode,
I also have Odin (version 3.13) on my computer along with TWRP (3.1.1 trlte and 3.2.1 version)
My device is a Samsung Galaxy Note 4 N910F bought in shop, no special carrier. It was bought in the Netherlands.
I have tried everything that I have read. The furthest that I can go is the Second Samsung Logo with the Flashing Light
Whenever I try to Flash the stock Firmware for my N910F, everything goes well in Odin but then when the phone reboots, it (sometimes) install the system update until 30% then shows erasing then either crashes right there and then or load the system update bar, completes it then shuts down.
I have tried multiple firmwares, even recovery firmwares. All the same problem. I can see the firmware is flashed, because when I enter recovery mode after I flashed a different ROM, it shows the version I flashed.
I cannot seem to install TWRP because it was never rooted.
Whatever I do, at some point, my phone either gets stuck in a bootloop, freezes with the LED light or shuts down.
And I have also proceeded to use different batteries.
Do you have any options?
Thank you
Heat????
I'm far from an expert here, but I've just experienced a similar problem where my N910F started boot looping / freezing within 15s to 2 min after unlocking. Unfortunately my micro Sd (SanDisk 256GB) was corrupted a week ago, so before doing anything else I did some research (XDA/YouTube) and probably found pretty much what you've found. I frequently change batteries so I could discount that as an issue. Someone suggested using the Samsung Smart switch here https://www.samsung.com/uk/getting-started/smart-switch/, but I haven't used it (yet) so I can't tell. I presume you had the latest firmware from Sams https://www.sammobile.com/firmwares/galaxy-note4/SM-N910F/.
My issue was that I needed to recover data, docs, photos, phone numbers etc. When boot looping the note 4 got very hot . In particular around and to the left of the camera (looking at the rear). Thinking it could possibly be the dreaded eMMC problem which also manifests itself by creating heat, I thought cooling the device might help. I placed the Note on a cooler box freezing block and voilà! No boot loop. I was able to remove all, but necessary apps and do a full copy to my PC. Storage was reduced from around 90% to 50% and memory 80% to 60%. It's now been stable for 12 hours, but the jury is still out. Next will be full reset with he latest available firmware 6.0.1 as mine was still on 5.1.1.
Good luck and hope this may be of some help.
I've got this problem, too, when using the unofficial Lineage 15.1 rom. SIM death and boot loop. After flashing the latest stock rom through odin, it passed but the screen was black and no system was installed. The blue notification light was constantly stuttering, though. And I couldn't even go to recovery!
When flashing, a 910F can get hot - use a cool temperature room and/or a fan blowing onto the device.
If it's not too late...
I am having a big problem with A2017G. What happened is since the battery was ready for replacement, I took it to a service shop and the man did it in front of me, opened the phone, replaced the battery and put it back together. However, when we turned it on, it went to bootloop showing only ZTE logo and that is it. He told me that he can't help with that. So, I used the Axon 7 Tool to flash Full EDL and it was successful, but the phone works like it is severely down-clocked, it is so slow you can see where you touched the screen, and it takes 3-4 seconds for it to respond to a touch. I tried at least 7-8 different full EDL ROMs (MM, N, O) always with same result. I unlocked bootloader and installed TWRP (last version available for Axon 7) but never managed to boot into any custom ROM (flashing goes fine, but no boot). Does anyone have any ideas or suggestions, or is it probably hardware problem? Any help is appreciated !
So basically i wanted to custom rom this tablet because it was slow and wated to put crdroid on it, i know what you're thinking, TWRP IS NOT AVAILABLE FOR MY TABLET so i went with the lineageOs recovery flashed trough heimdail (on Fedora 37 Linux) i flashed it two times because the first one it booted normally and it resetted the tablet. After i booted into recovery, the tablet showed the stock recovery, so i flashed the recovery again, causing it to bootloop
Please can someone help me, i need that tablet for school, i dont have any money to bring the tablet to a repair shop
EDIT: So after my last post, you can see it in my profile, I somehow managed to get off the bootloop by flashing the stock again. But now I came upon a thing that I think that's worse, if before it turned off after rebooting like 5 times, now I can't even turn it off, I have to wait until it's battery drains (I charged at 1% and took 30 minutes to power off) ,can someone help me, it shows at first the logo with the name of the tablet then it remains on the Samsung logo
Refer to this thread: https://forum.xda-developers.com/t/...-installing-lineage-os.4588147/#post-88556803
Perhaps you could contact the author of that thread. It seemed like he/she was experiencing the same problem as you and ended up fixing it.
dumdedumda said:
Refer to this thread: https://forum.xda-developers.com/t/...-installing-lineage-os.4588147/#post-88556803
Perhaps you could contact the author of that thread. It seemed like he/she was experiencing the same problem as you and ended up fixing it.
Click to expand...
Click to collapse
Thank you