7" Pumpkin android 8 and Nissan x-trail 2006 - Android Head-Units

Have ordered this unit for my 2006 xtrail.
But not sure what wiring harness I need. Will this fit directly to the connector in the car, or do I need a adapter?
Will steering wheel buttons work with this?

I know this is an old post but I'm looking at the same unit for my 07 X-Trail. How did you go fitting it, did you just need to buy a nissan iso pack? Did the unit fit in the dash ok and are you happy with the unit overall?

Related

Which head unit for Toyota Prado 120?

Hi guys,
My old Android head unit got touch screen broken so I'm looking for a new one.
My car is Toyota Land Cruiser Prado 120, 2005, with a JBL amplifier, but I already have a CANBUS decoder from my old android head unit.
Can you recommend a unit that will work with a rear view camera (RCA), car recorder (USB) and has possibly least number of issues?
And a seller (preferably tomtop, gearbest, banggood or aliexpress)?
You can look at Joying new Octa core 7'' head unit JY-UM135N2PX5C
SummerLiu said:
You can look at Joying new Octa core 7'' head unit JY-UM135N2PX5C
Click to expand...
Click to collapse
Thanks for recommendation, but this is a 2-DIN unit, and I need one specific for Toyota Prado to integrate nicely with my dashboard. I didn't find one like that from Joying.

Xtrons and Volvo

Hi everyone, I’m new to this forum. I know a bit about Volvo (the older ones!), and Volvo head units, but not about Chinese Android head units.
I’m considering replacing the aging head unit of my (also aging!) 2002 Volvo V70. The head unit is a simple HU 603, so no Dolby, center speaker or extra amplifier. I’m looking at Xtrons TA702P (quad core) or TB706PL (octa core). I prefer a 7 inch touch screen, no knobs, no DVD. But navi should be good, as would radio. Music I can play through usb. And my Elephone S7 (Android 7.1) phone should mirror on the unit if possible.
Other functions like back up camera or steering wheel control are not important to me.
I know how to take the HU 603 out. I know I need an adapter harness to connect with the new unit. And a fascia adapter. All that is available.
My questions:
Xtrons has many car/model specific head units (not for Volvo). They have Canbus decoders supplied with the unit. Not so for the TA702P or the TB706PL. Will that give problems? (The answer from the ebay seller is somewhat useless: ‘Both the TB706PL and the TL702P does not come with the canbus so that you just ignore it.’) Anyone has experience with this?
How are user experiences with these modern Xtrons units? I know, ‘you get what you pay for’, I know that. But still, worth the money?
Units from Kenwood or Pioneer are other options, but again, is it worth it?
Thanks!
Hi there
I own and drive a V70 from 2006. I have replaced the original HU with a SONY 2 DIN unit (XAV-V630BT). This unit has great sound. I also swapped the speakers to JBL. It is totally worth it.
I have a CANbus to resistor unit. This makes it possible to use the steering wheel buttons.
Right now i am testing a Android HU. Unfortunately i have bought the wrong one. The unit is full of bad design choices. The sound integration in the unit is bad. I think that radio, BLUETOOTH and AUX sound runs directly to the sound processor. This means that when the Android unit plays a sound, the sound from the other units are turned off. In my opinion the other source should just fade a little.
jacobwind said:
Hi there
As said, I don't need steering wheel controls, my steering wheel doesn't even have the buttons. Must have been a cheapskate first owner!
Does this mean the Canbus only affects steering wheel control? So ignoring Canbus (no resistor as in your case), will give no problems?
And yes, by now I've found out Android units may not have the best sound quality. Or radio reception.
Click to expand...
Click to collapse

Wiring Head Unit

Any ideas on how to wire a headunit intended for 1 car to be used in another?
I.e. I'm trying to install a unit that is made for a Honda into a Toyota, any ideas on how I can accomplish this?
The unit in particular appears to be a HA Dasaita 9" unit, going into a stock toyota (sans amplifier).
I was thinking of buying a generic Metra harness and than crimping the included HA Dasaita wires to matching colours to match the harness, but unsure if these HU's use the standard colour combination.
Any ideas?

Eonon 10.1 inch universal double din steering control

Just bought one of these eonon q03pro units to put in my 2006 mercedes c180 (W203), its a universal unit not car specific, to replace a failed other chinese unit(8 core 8667 chip based unit). I have tested it today but not fully fitted as waiting for facsia kit to arrive.
My last unit was car specific with dedicated wiring harness and canbus for steering controls, this one only came with a standard ISO connector and I have a dedicated mercedes wiring harness coming with the facsia kit, however having a day off I decided to try powering up with the harness from the old 8667 unit, it powered up ok but the steering controls will not work. I have been told Mercedes don't use the resistive control method, you can't program wheel controls like that via the key wires. You would need to use the high/low wires and select your Mercedes model in the advanced Canbus options
robfox1975 said:
Just bought one of these eonon q03pro units to put in my 2006 mercedes c180 (W203), its a universal unit not car specific, to replace a failed other chinese unit(8 core 8667 chip based unit). I have tested it today but not fully fitted as waiting for facsia kit to arrive.
My last unit was car specific with dedicated wiring harness and canbus for steering controls, this one only came with a standard ISO connector and I have a dedicated mercedes wiring harness coming with the facsia kit, however having a day off I decided to try powering up with the harness from the old 8667 unit, it powered up ok but the steering controls will not work. I have been told Mercedes don't use the resistive control method, you can't program wheel controls like that via the key wires. You would need to use the high/low wires and select your Mercedes model in the advanced Canbus options
Click to expand...
Click to collapse
Hi, as you changed device , you must set also model for wheel controls via canbus settings in factory settings. It must work.
Sometimes controls must be set afterwards, depends on the canbus box (if it is SIMPLE SOFT, HIWORLD or RAISE canbus) that you installed. You have to shift between canbus settings of various car models in order to work. If you have online update for canbus controls update via internet.
Thank you will try that, maybe trial and error but I thought there would be a way to make it work, as it was from a previous unit set for W203 Mercedes c class. This is my 3rd android unit in the car so hopefully this one will work

Android head unit Steering Wheel Controls-programmable without the adapter?

Hi, I have a Podofo 7" stereo with 2gb, single din. Trying to install in a 2009 BMW 128i. I only bought it to have steering wheel controls. No steering wheel controls. Axxess tech support tells me that the ASWC-1 is not supported when using off brand Chinese head units. I have a Scosche wiring harness. I'm not able to get the Axxess unit to work. Is there a way to get rid of the Axxess adapter completely, and just program the head unit to communicate with the BMW canbus?
Thanks,
Jimmy
trickstarj said:
Hi, I have a Podofo 7" stereo with 2gb, single din. Trying to install in a 2009 BMW 128i. I only bought it to have steering wheel controls. No steering wheel controls. Axxess tech support tells me that the ASWC-1 is not supported when using off brand Chinese head units. I have a Scosche wiring harness. I'm not able to get the Axxess unit to work. Is there a way to get rid of the Axxess adapter completely, and just program the head unit to communicate with the BMW canbus?
Thanks,
Jimmy
Click to expand...
Click to collapse
Axxess tech support tells me that the ASWC-1
Click to expand...
Click to collapse
This kind of adapter is supossed to work with professional audio brand such as Pioneer, JVC, kenwood etc. where device only accepts analog signal.
I have a Scosche wiring harness. I'm not able to get the Axxess unit to work. Is there a way to get rid of the Axxess adapter completely, and just program the head unit to communicate with the BMW canbus?
Click to expand...
Click to collapse
The best and the simplest solution is to buy complete new harness with canbus adapter dedicated for android head units and your car.
Something like this will do the job:
https://www.aliexpress.com/item/1005003784462950.html?spm=a2g0o.productlist.main.13.f2e7292c6OY07w&algo_pvid=36c02e0c-4e6e-465b-8420-5f8a873b8d49&algo_exp_id=36c02e0c-4e6e-465b-8420-5f8a873b8d49-6&pdp_ext_f=%7B%22sku_id%22%3A%2212000027158229553%22%7D&pdp_npi=3%40dis%21PLN%2198.54%2188.68%21%21%21%21%21%4021224cdb16785372831758079d070a%2112000027158229553%21sea%21PL%212634403771&curPageLogUid=O05Std8ZMkO9
or
https://www.aliexpress.com/item/1005004229947985.html?spm=a2g0o.productlist.main.47.f2e7292c6OY07w&algo_pvid=36c02e0c-4e6e-465b-8420-5f8a873b8d49&algo_exp_id=36c02e0c-4e6e-465b-8420-5f8a873b8d49-23&pdp_ext_f=%7B%22sku_id%22%3A%2212000028458990265%22%7D&pdp_npi=3%40dis%21PLN%2140.36%2132.28%21%21%21%21%21%4021224cdb16785372831758079d070a%2112000028458990265%21sea%21PL%212634403771&curPageLogUid=J9IkPm7opnQF
But make sure what type of plug is in your stereo and car harness. And canbus adapter too..
I bought simillar for my bmw x5 and works fine. beside stering wheel controls it provides open-door alerts (and trunk ) and simple data such as vehicle speed, revs, milage, temperature.
THANK YOU THANK YOU THANK YOU THIS IS JUST WHAT I WAS LOOKING FOR!!!!!!!!
Hi, use and buy HIWORLD canbus and settings for multimedia it's much more stable. If you can find any on sale.
This ones provided in links are unbranded. I don't know if they will work.

Categories

Resources