hi guys,
i have searched the forums for wm 6.5 ROM, but lots of them are still in beta phase,have bugs or slow.
can anyone give link to a stable WM 6.5 ROM for my xda orbit
Thanks in advance
...
6.5
Babbelut ROM WM6.5-28005 v0.3 NLD/WWE
*spb mobile shell is great, he is currently developing beta rom
http://www.sendspace.com/file/97d3p7 (download link for v.3)
http://www.megaupload.com/?d=ZTXWO4D7 (download link for v.Beta)
Downloading it now, will check it later on. THX
Was about to create topic but found this and hopefully will try this and hope it works on my XDA Orbit 2. I brought it off Cex from Aylesbury and it needs some love and update as i have Windows Mobile 6.1 (eeurrgh) and brought it off cos i thought i can upgrade to Winodws Mobile so i hope these works well for me.
Any introductions of doing that?
Thanks in advance.
First link didnt work. The XDA tried to block it by restarting it themselves. Tried third time. And unlucky.
Second Link. How can i use NBH file for my XDA?
...
Wrong place dude..
this is for xda orbit 1/artemis..
your looking for xda orbit 2/ poloris..
you need to be here..
Rn
Hi all I'm new here. My phone "O2 XDA Orbit" behaving strangely. Suddenly the sound disappeared and I can not hear phone calls directly into the phone, and any other person hears me not(microphone off), and not just one click sound on the screen. If I restart the phone with USB cable inserted into the phone and computer (on), then the sound occurs again(but not in original style, sound occur in to the back speaker not in front ), and phone function almost normally with microphone (on)>>> until the next reboot when sound disappear again and microphone is off. I mention that;.... connection the phone to the computer can not be achieved in any of this cases. The error code (USB connection) connection on my computer is {Code 10(One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it)} who can not recognize the new hardware. In your opinion of specialists in this field what would be done? I think something happens to the ROM which gives errors of hardware power. The sound occurs when I insert into the phone power charger connector and disappears when the power supply plug out ... Please if you can help me with some guidance what I have to do one upgrade of ROM or something? Specification of the phone is:
[*]IPL-3.04.0001
[*]SPL - 3.04.000
[*]OS - 3.4.0.0
[*]CPU - OMAP850
[*]Speed 201Mhz
[*]RAM 64Mb
[*]Flash 128Mb
[*]Data bus 16bits
[*]ROM 3.4.206.2WWE
[*]ROM date 4/18/07
[*]RADIO Vers. 02.67.90
[*]PROTOCOL Vers. 4.1.13.28
[*]EXT. ROM.Vers 3.4.206.101
[*]MODEL of phone -ARTE200
[*]Platform - PocketPC
Funny ...!!! Today I put the phone to the charger and after I removed the plug from the power supply, the sound has returned, but the USB connection to a PC still can not set ...! What should I do? A new version of Windows can install on my phone; without connecting the USB cable to the phone(ex.-of my card micro SD)??
Adryum said:
Funny ...!!! Today I put the phone to the charger and after I removed the plug from the power supply, the sound has returned, but the USB connection to a PC still can not set ...! What should I do? A new version of Windows can install on my phone; without connecting the USB cable to the phone(ex.-of my card micro SD)??
Click to expand...
Click to collapse
have you got activesync or windows mobile device centre installed on the pc?
if yes..
i suggest you buy a new usb cable.
i have this problem with a couple of cables.
"USB DEVICE NOT RECOGNISED"
but when i change to a differant cable, everything is ok.
flashing via micro sd - upgrading windows.
have you done uspl 1.11.cmon?
Thanks for your attention Raving in the first place ...! Data cable has no damage that I checked the same cable with my photo camera and it works normally with PC and I have two more data cables and the problem is the same. It seems weird that the phone do some work once, ...once not. It starts when he wants the sound, and can not find any explanation ... In contrast with the USB connection can not establish anything, something happens to the sound module and USB ...PC see's something, but it's not sure what it is, and says he can not establish connection with the new hardware and it gives me error "CODE 10". in Universal Serial Bus Controller and the Active Sync is instaled on my PC but he don't say a word about this connection...I don't know on what to do...! I must mention that this oddity occurred only three days go and without them I do something wrong ... He grabbed him crazy after a normal operation for a year and a half, because we had no problems with it until now ... I used as a GPS and the phone and I was really pleased with him. By the way, what they mean uspl 1.11.cmon? All data of my phone are in the first post.The phone it was once unlocked by someone else, and now I can use any SIM card from any GSM provider..............I forgot to say that I've rebooted 2 times in general mode and now works but without USB connection sound when he wants it or not................But I think she has lost some registry ...!!!
click 1.11.cmon in my signature.
this will divert you to a tutorial thread.
when you can connect your device to your pc successfully, you should do the uspl 1.11.cmon but not for now. do not try and flash a rom yet either, you will break your device. (thats what uspl 1.11.cmon is for)
id like you to just try the "hard reset".
back up all your data first.
bookmark the page as ill be updating it regularly.
personaly i think its your usb cable, eg:
one of my cables works with a micro sd reader but not my for my device, i understand your cable worked but now does not.. however thats what happened to me.
Sound engages when he wants and where he wants. If I restart the phone, sound disappears and microphone stop; and I can not talking on the phone. Enter data cable from PC to phone, and give the phone restart. Once the phone is starts, sound appear but only in back. When talking on the phone sound very loud and sounds of the touchscreen controls can not disconnect the rear speaker who remains engaged and does not want to disengage it from the normal operating mode. Another job here would be that when inserted in the charger cable, the sound is right: each speaker and microphone or operational. If I remove the plug (charger) of phone then the phone function normally just like before, but without USB connection. If I plug "USB cable data" on the phone, to the desktop I see message "One of the USB devices attached to this computer has malfunctioned, and Windows does Not Recognize it. USB Device not recognized." If I unplug USB cable from phone the sound disappears, and what I have to do is to start over again.......!!!!!!!!!
I tested all data cables, and are ok. The problem is hard. The hardware has a technical failure which somehow blocks the data on USB. Battery power consumption is higher and the battery is discharged rather quickly than it was before the cage. At night when I charge the battery full, morning at 10:00 is only 30/40% of capacity. But what is even stranger is that: when I connect phone to PC, in device manager shows me the new hardware (Mobile Device) but after a few seconds there appear a connection error code (CODE 10) that is the hardware can not start. Active sync has not started when the fault occurred..... In your opinion what should be done in this case? ... Should contact a service or ... in any way I can test something before others get the screwdriver into my phone?
sabih00 said:
hi guys,
i have searched the forums for wm 6.5 ROM, but lots of them are still in beta phase,have bugs or slow.
can anyone give link to a stable WM 6.5 ROM for my xda orbit
Thanks in advance
Click to expand...
Click to collapse
Thanks, i will test...
The connection was made the first attempt. After a week of "digging" through all possible places I noticed that the connection was obstructed by the firewall.PFFFFFFFF ..... Finally found! The FIRE WALL(on PC) settings to be set: ADD PORT------ "Outbound UDP ----5679" -on exceptions tab....See this:http://www.microsoft.com/windowsphone/en-us/howto/wp6/sync/activesync-troubleshooting.aspx?WT.mc_id=FWLink
TKX Raving U're the best...
...
Adryum said:
PFFFFFFFF .....FIRE WALL
Click to expand...
Click to collapse
lol, i didnt think about the fire wall being the problem.. typical that it was something that simple.lol although it did sound like a dodgy usb cable..
thats something ill remember
have a good new year dude!
guys i am having a problem....whenever i try to install any ROM i get error 224 device not responding......my htc is connected through activesync.....what can be the issue...i am using windows 7.
..
raving_nanza said:
ERROR [224] : DEVICE NOT RESPONDING
check the ActiveSync connection and run RUU again. if problem continues, uninstall active sync and re-install.
Click to expand...
Click to collapse
1. unplug device
2. re-connect device to pc
3. wait for active sync/wmdc to connect
4. run ruu
5. if error continues unplug device
6. uninstall active sync/wmdc
7. re-install active sync/wmdc
8. restart pc
9. go to step 1.
Rn
quertz?
Hi raving nanza,
you did a great work with BAB v03.
It works great. sometime the touchpanel reacts slow but good.
But i can't change my touch keyboard from qwerty into qwertz.
HKEY_LOKAL_MACHINE\System\CurrentControlSet\Control\Keyboard Layout\"Active" is "00000407"
Thats the German code - but still having Qwerty?
HKEY_LOKAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD\"TaskManVKey" is "0x23"
HKEY_CURRENT_USER\keyboard layout\Preload\1\"default" is "000000407"
What to do?
...
che.bike said:
Hi raving nanza,
you did a great work with BAB v03.
It works great. sometime the touchpanel reacts slow but good.
Click to expand...
Click to collapse
thats Babbeluts rom, not mine!
i merely suggest it to the other users
ill look into your qwerty to qwertz keyboard, when i find out ill post it here and ill update the tips&tricks thread
Rn
Hi !
I am new here. But I watched posts here many time.
I have Gionee Elife E7 Mini (just bought). Now I want to connect my phone to my PC for use PC's Internet through USB. The feature included in "MORE WIRELESS NETWORK" in device.
But after connecting, it need driver RNDIS and not supported drivers provided by Official website (Two type drivers, (1) USB DRIVER, (2) SMART PHONE USB DRIVERS).I have earphone provide with device with single button. It work with
single click - Play/Pause/Call pick/Call disconnect
Click and hold - Screen on / Screen off (Useless for me)
I want to more controls like
single click - same as above
click and hold - Next/Previous track of music
and one other feature that open VOICE SEARCH or GOOGLE NOW.
Can anybody help me about these problem.
Thanks in advance
Hello,
I have a SAMSUNG NOTE 4. For several months I'm trying to install drivers for additional wifi network adapter that connects to the microUSB port . Phone zrootowany etc. , but still can not cope with this wireless card : / First I bought TP - LINK TL - WN725N , then BPI - WF810S and nothing : / I thought that maybe she installs when you connect , but unfortunately it is not. I am writing to ask for help . I care very start on the network adapter and can not I'll be very grateful for your help ... I would ask you to explain exactly how to do this . Today I have Ditto Note 5 (for Note 4 ) , kernel version 3.10.9 .
Please contact,
Regards
Since I've never heard of this before, on any Android forum I've been to, I would assume it's not possible. I don't think you can install any drivers on any smart phone, mainly because it'd have to be written into the current version of the OS on your phone. I could be wrong, but I'm fairly sure whatever device you try to connect to your phone would have to be plug-and-play. That's why you can't use a blue tooth mouse on an iPad, for example, even though it supports blue tooth devices.
So my note 3's MTP functionality was beyond oof, i decided to get spacedesk on windows & android, my note 3 was connected & it didnt recognise the PC at all & the PC had no driver detection so like full on corrupted mtp in the highest directory not even root enabled devices read because even though this fix will defy that & show that software without admin rights can somehow get your phone to trigger somthing to reflash its MTP feature / flash the driver with the generic MTP feature!
Im not even sure how but heres a list of what happened in order:
What caused problem:
A drop (did the drop somehow write somthing via the pins? no clue but thank god it didnt touch the booting procedure)
What fixed problem:
Got spacedesk on android
Got spacedesk on windows
Connected android to windows with wire
PC gets a new driver connected sound with the display taking place
Phone supposedly crashes & this is where it fixes itself
Im not sure what couldve done this but i may be convinced that its the drivers that the software got the PC to put on the phone & the phone wasnt not connected at this stage as it was there, just as a display
Phone reboots & PC gives a new driver connected sound
Phone "suddenly" detects PC & so uses the data wires in the cable to tell the PC that theres an android here
Phone is fine now
I need confirmations from around 5 people whos either got this problem & now wants to try this or people with thrashed note 3's purposefully trying to make the problem to then try fix it
(Not saying you should try break your device to confirm this XD)
Device which fix was tested on:
SM-N9005
hlte
SM-N9005
n9005xxugboj1
Hello Dear Sir,
How are you doing???
Thanks for helping everybody out of their PC problems.
I have a final trial for your exceptional capabilities.
Let's see how do you handle something real important???
Something I have been failed to trouble shoot own my own even I have tried all kind of solutions, even regedit and uppercase and lower case removal everything in my power.
Let's see if you are good enough to solve out this issue successfully???!!!
I have tried to connect Hitachi + LG = HL slim portable Blu-ray Writer (with 128GB BDXL Burning capability).
Model: BP55EB40
SVC Code: EB40
Manufactured: Dec. 2021 (20-12-2021)
Rom Version: 1.03
Windows Home Edition (English Version) Version 22H2 (OS Build 22621.1848)
I have recently reinstalled Windows 11 Home edition on both laptops MSI GE66 Raider 10SFS & MSI GL66 Pulse 12UGK.
But none of them detect the above mentioned devices (I have 6 of them) and none of them works on both laptops. It is with USB2.0 interface and both USB2 and USB3.1 ports on both laptops do not detect them and there is nothing in device manager even I have installed all drivers on both laptops and have them Windows updated to full latest capacity.
No devices appears in device manager, if it was error with one drive I cannot presume that all 6 have error???
But funny thing is that I can open HL devices by pressing button on them???
Please take your time, and if you manage to solve out this issue successfully (make appear HL BP55EB40 in Windows explorer and Device manager) then my respect will be yours.
OK??? )))
Thanks,
Have a great weekend,
Best regards,
Themevictory