I installed a stock ROM on my XT1680 which didnt have apps from my old cellphone service provider (TELCEL on Mexico) because i use another one (Weex on Mexico) however, i entered my TELCEL SIM Card, but a "Telcel" app appeared, then i went back using the newer sim Card (from Weex). Does this (insert a TELCEL SIM Card) change the update channel or anything like that? I'm afraid that i will get the updates through Telcel.
Related
I have a T-Mobile MDA (US) upgraded to v2.26 ROM. At this point the only SIM card I have installed in the phone is my standard T-Mobile SIM card.
In about two weeks I am headed to China, and I would like to buy a local China Mobile SIM card (pay as you go type) and install it in my phone, as the per-minute rates are only $1 versus $3 for T-Mobile.
Am I going to have to unlock my phone in order to use this second SIM card? If so, what is the correct procedure to do so?
Thanks to all in advance for your help.
lokiwiz03a is the file for this model
connect the phone to the pc
run the program on the pc
it will give you the unlocking code
you will need to enter this code when you use the new sim
good luck
I'm trying to unblock my HTC Touch 3g but every time I place a SIM Card into the mobile it says NO SIM CARD, and it doesn't ask me for a code to unblock it. What can I do to solve this problem and unblock my phone??
The phone doesn't ask me for a code to unblock
Bad sim card.
Bad sim card contacts (the gold metallic parts that make contact with your sim, not your phone numbers) on phone
Binary100100 I used 3 different sim card and t-mobile sim card too
call tech support for your phone
32b myTouch 3g 2.2.1
Cyanogen Nightly 271
Hboot - 1.33.0006
Radio - 2.22.19.26i
Kernel - 2.6.35.9
ADW 1.3.3
ClockworkMod Recovery
Slideit keyboard
here's couple of pic
sim card inside
pin on the phone
_PaPaUpA_ said:
Binary100100 I used 3 different sim card and t-mobile sim card too
Click to expand...
Click to collapse
Then it's your phone. Sorry.
Dear all,
I hv got an i9502, but the SIM card slot 1 is always showing "no SIM card" whatever I put different SIM cards.
But I am going to use it in HK, is it caused by the chinaunicom network lock. Is anybody using the other wcdma card except chinaunicom?
If it s caused by network lock, any method to unlock the network lock?
Thanks.
I think if locked, it should be both... I9502 from China unicom should be unlocked
Sent from my GT-I9502 using xda app-developers app
I have similar issue. My i9502 suddenly have sim card 1 locked. When I go to <Settings> <More> <Security> <Set up SIM card lock>, it is found SIM1 is locked.
I tried to tick and unlock it, but it says "0 attempts left" and as a result, I cannot unlock SIM Card 1.
Now, I can only use SIM Card 2 on my i9502.
I have tried to refresh the firmware and the result is the same, i.e. SIM 1 is still locked and cannot be used.
Any hint to solve it!!!
Million thanks in advance.
I met same problem since this morning. have you got solution yet?
yklai said:
I have similar issue. My i9502 suddenly have sim card 1 locked. When I go to <Settings> <More> <Security> <Set up SIM card lock>, it is found SIM1 is locked.
I tried to tick and unlock it, but it says "0 attempts left" and as a result, I cannot unlock SIM Card 1.
Now, I can only use SIM Card 2 on my i9502.
I have tried to refresh the firmware and the result is the same, i.e. SIM 1 is still locked and cannot be used.
Any hint to solve it!!!
Million thanks in advance.
Click to expand...
Click to collapse
Hello,
I updated my 900FD (XSG) from G900FDXXU1CPE1/CPB4 (mai 2016) to 900FDXXU1CPF4/CPB4 (june 2016) through OTA last week.
Since then I can no longer use data plan from sim2.
Configuration: French Sosh Sim1, French Bouygues Sim2
I tried both sim alone, regardless of slot 1 or slot 2: data plan OK
I tried both sim in a galaxy S6 (single sim): data access OK --> the sim cards are fine
The issue appears only if both cards are inserted, and Sosh card is in slot 1.
The issue is: data plan starts (or sometimes not) works for maximum 15s, and then stops.
I can't blame any operators, as sim cards and networks are fine, it's just the combination described above which fails !
I am using Sosh in slot 1 and Bouygues in slot 2 for the past 2 months without any issue (previous rom)...
I finally found that the Sosh card is NFC (NFC N9), whereas Bouygues card seems not to be NFC (nothing indicated).
NFC is off in the settings of the phone.
I am used to have personnal card in slot1 and Work card in slot2 for phone access, and don't want to try a firmware downgrade (downgrade may be risky).
Is anybody here have and idea how to sort out my issue ?
Regards,
Fred
Guys , I bought a moto x play used. When I check my SIM card 's number(settings > SIM card > SIM card slot 1), it is still with the previous owner device , and not my current number . What to do?
My actual SIM card works normally
You need to load an xposed module (http://repo.xposed.info/module/com.gnufabio.simeditor). You need to this only once even not on your moto, phone with your sim card will be enough
dzialo88 said:
You need to load an xposed module (http://repo.xposed.info/module/com.gnufabio.simeditor). You need to this only once even not on your moto, phone with your sim card will be enough
Click to expand...
Click to collapse
Man, i really dont want my phone rooted... Exists other ways to do this?
I don't think so, but this can be done on your old android phone if you can install your SIM card there