i didnt do anything with my yureka, tomorrow its battery dropped down and switched off so i put it on charging after decent charge upto 80%, then i tried to switch i on but its stuck at cyanogen logo.
here's what i already tried 1. i went to recovery and wiped data and tried rebooting. nothing happened still stuck at cyanogen logo/
2. i tried unlocking bootloader but i cant, coz i cant turn on usb debugging. and all in one toolbox needs my device in turn on state which i cant do.
3. i downloaded a custom rom of marshmellow cm13 but it gave me signature error when i tried to flash it via stock recovery.
4. then i downloaded the rom provided to me via cutomer support it sucessfully flashed but still stuck at cyanogen logo/
now m fedup i dont know what to do please give me sugestions thank you.
I took it to service center and they said motherboard is faulty and asked 6000 fr repair, i was hopeless coz i tried unlocking bootloader it said ok and then tried installing custom recovery but nothing happened it still boots in stock recovery then i used
Fastboot -i 0x1ebf boot recovery so it boots in twrp and then i was able to access internal memory and flash new rom but to my surprise it also got stuck at boot logo. So i guess now i have no other option but to buy new phone.
I come to this point that yureka phones/ micromax phns are not very good phn to buy all micromax phns ive ever came across didnt stood fr more than one year.
Hello,
my Galaxy S4 got soft bricked recently and I am looking for a solution for 5 days now and now I decided to ask you guys for help since I can't find anyone with the same problem.
I had Albe95 LolliROM 9.0 (15/05/16) [HPA1] flashed on my phone for about 3 weeks and everything was perfect.
I was using my phone when it suddenly restarted itself and it got stuck in a bootloop (SAMSUNG animation). After many attempts I could boot into recovery (TWRP) but it would freeze there and I had to remove the battery...
I could also boot into Download Mode so I decided to flash a stock rom (I9505XXUHOJ2_I9505OXAHOJ2_I9505XXUHOJ2_HOME.tar) which I downloaded from Sammobile. Odin would always stuck at system.img.ext4 but again after many attempts it workted and I had success. When it was booting my phone froze at "optimizing apps". So I had to turn it off and restart again, but this time the phone was always freezing at the first samsung logo and wouldn't go further.
I can still go into Download mode but can't flash anything because eather Odin fails (complete(write) operation failed) or my phone freezes. Sometimes when I boot my phone into Download Mode the screen would do strange things like flickering and weird colors would show in DL Mode.
So my problem:
- booting into Download mode after works though it freezes sometimes
- can't flash roms because phone is freezing all the time
The model # in download mode is 9505? Was the phone ever dropped? You're using the original Samsung USB cable to flash?
audit13 said:
The model # in download mode is 9505? Was the phone ever dropped? You're using the original Samsung USB cable to flash?
Click to expand...
Click to collapse
Thanks for the reply.
-yes modelnr is 9505.
-i have not dropped my phone recently. I mean its over 3 years old so of course I've dropped it but never really bad and it has no scratches or anything.
-I've tried different cables and samsung cable was one of them.
I also tried all ports of my laptop even tried another pc
Maybe flash the stock rom with a pit file?
audit13 said:
Maybe flash the stock rom with a pit file?
Click to expand...
Click to collapse
I didn't try this pit file thing because I don't understand the meaning of it exactly..
But after many many Odin flash attempts I got a success with a stock rom 5.0.1.
I think I figured out what the problem is but I can't really tell why it's happening (Hardware broken maybe, but which one?)
So after the flashing the stock rom successfully the phone restarted and started the first boot but it froze during the samsung animation again...
I thought maybe if I try a lot of times eventually it will work, so I tried and tried and it always got stuck at samsung animation. (before every boot I had to remove the battery and wait ca 10 sec because otherwise the phone would not start booting at all)
I did not come further than the samsung animation so I removed the battery and placed the phone (I almost gave up).
But after one hour I tried again and this time it passed the samsung animation and got to the Optimization part of the apps. aaaaand it froze there again.
I thought maybe if I wait again for 1 hour I can pass the optimization part. So I did and it really worked. I got to the startscreen.
So the current problem is:
- The phone boots and makes it to the homescreen and freezes after ca 10 seconds. And also I have to wait for about half an hour or one hour to get that far. If I try again right after the freezing I can't get passed the Samsung logo.
What could cause this freezing? Maybe the cpu has to "cool down" in the one hour of waiting and freezes because it gets to hot? I really don't know what it could be.
Something on the motherboard, likely either CPU, EMMC chip, or GPU, is failing. Why or how I don't know, but I'd have a tech look at it.
Can anyone PLEASE help??
My partner opted to do a suggested update on her S5, but didn't notice the wifi was off. The phone seemed to have done the update, but shortly after it rebooted itself, then again, then again. The frequency of reboot got quicker and quicker and now it loops between the Galaxy S5 splash screen and the SAMSUNG logo, but doesn't go any further.
I managed to boot the phone into reset mode, cleared the cache and then did a factory reset, but that did nothing to prevent the boot loop.
I then downloaded Odin (ver 10.3.7) and what I believed to be the correct firmware (G900FXXS1CPLV_G900FVFR1CPJ1_G900FXXU1CPIW_HOME.tar.md5).
Having checked the battery was charged, I followed the instructions of connecting the phone via USB, loading the md5 in the AP, checking Auto Reboot and F-Set time in the options and clicking the Odin Start button. I had removed the battery, replaced it and then booted it into the update mode (Power, Home, Volume Down, then volume up) with the screen confirming I was in the right place (....do not unplug.... etc).
The file loaded, (green bar at top of the Odin window on my PC) and Odin reported success. I then disconnected the phone, booted in recovery mode, reset the cache and then did a clear data, factory reset.
The same symptoms prevail, STUCK IN BOOT LOOP!!!!
The only thing different is that if I plug it into the USB on my PC, after a while the phone tries to turn itself on and goes into either a boot loop or freezes on the Galaxy S5 Splash screen or the SAMSUNG Logo.
I am charging another battery (just in case that is in some way to blame) and will try again to replace the firmware, but could I be missing something, do I need to do anything with PIT (I thought this was all taken care of by Odin using the MD5 file) or is there some other test I can perform that will show if the phone is fried???
MANY THANKS for looking!
ur going correct, try to reflash it again through odin and dont disconnect phone until it boots into system, it is taking some good time, so just wait and dont do anything this time like clearing anything or restoring. i hope ull get success.
THANKS - but...
Thanks Rayzen, I will try the whole thing again, but I think there is something more to this than a firmware fault!
There and gone again
OK, so on the 4th attempt I got the phone to take the firmware using Odin, it reported success and the phone rebooted itself (several times) and eventually appeared to boot to a new factory reset.
I put in a SIM card and entered my email and google account details and left it charging over night. This morning when I tried to use it, the screen froze and then it rebooted itself. Hey presto, the phone is back to square one with a boot loop.
ANYONE (please) got any suggestions?
THANKS
No one??
same here, same symptoms, same feeling.
when flash gone right... i feel lucky.. but for half hour only, rebooted and angain in boot loop.
I cannot even boot in recovery. flashed TWRP. from 5 boots in recovery only 1 success.
When trying to wipe phone in TWRP - it hangs.
still trying to install some other (custom) rom. still no success.
hope never dies
same things happened here! now cant get samsung galaxy s5 to boot...............
Are you sure your using right firmware? as it took me a few versions before it booted last time this happened?
Could any please confirm what is the right firmware for samsung galaxy s5 900F
It took another 6 or 7 attempts, left it over night and was about to trash it when it booted.
I then received a 'software update available' message and tried installing it. First attempt put the phone back into boot loop so I reflashed it again using Odin.
That worked immediately the over the network software update installed and now phone is 100%
Very frustrating but I got there!
glad you fixed it! ive tried three different firmwares and still nothing.
trying this one atm
G900FXXU1ANE2_G900FEVR1AND1_G900FXXU1ANE2_HOME.tar
oh and how long do they take to boot when there are sitting at the samsung glowing screen?>
I'm in UK and used what (I had to guess) was the best firmware.
I'll let you know which version it was when I get home tonight.
BUT I had all the problems with a single version and it eventually came good.
I read somewhere that overwriting a different core (from specific providers) with generic firmware, could lead to a world of pain until it gets full replaced... not sure if that's a good description (or has any fact to it) but it seemed to be re-loading and re-loading and re........ for ages, finally cracked it.
well mines booted now!but getting constant errors about samsung push!
If it'still booted, you'very made progress!
Push issues are mentioned elsewhere and can (eventually be sorted) but if you have a booted phone you should be able to get an over the air software update installed from the service provider....?!
Hi guys i need help recovering my s4 gt-i9500 i'm a newbe and i think i might have bit off more than i can chew.a few nights ago i download FlymeOS v6.7.1 just to see how it works i did the whole procedure of doing nandroid backups of my current rom which was marshmallow aicp v11 after that i flashed the flymeOS..when i was done exploring it i didnt like that much cause of its limited customization levels so i figured i'd just flash back my nandroid and get on with my life but it didnt go as planned i left the phone restoring and slept next thing i saw in the morning was black screen with an empty battery,i've tired everything flashing twrp from odin,stock rom but i still get stuck on initialization in odin and my phone wont boot into recovery mod it's just stuck on samsung logo at times it passes and led light glows but thats just it with a blank screen i need help it's the only phone i have and i love it:crying::crying:
Tried using different USB cables and USB ports to flash a stock ROM from Sammobile.com?
you need to flash repair firmware with pit file
I was using the device just fine, no problem. Then when I restarted the device for refreshing, it got stuck on bootloop, right stright to Samsung logo, not wait until the blue dot appeared, and it got bootloop after 1-2 seconds no more no less. The more scaring thing is that it completely got bootloop even when I attempted to boot into recovery mode, and I do have to plug my phone ( But at least it didnt bootloop when I was in Download Mode ). Yes, I did try Odin method, and it couldnt work. I tried the latest version, will try on older version to see if it works or not. The most weird thing is that the software at my Android before getting bootloop was G900F, and the back is still the same. I dont assume the back was resticked, but when it comes to Download Mode, it shows up as G900V. I dont know what to do now. Can anyone figure it out? I cant ****ing stand out anymore with Samsung old modem anymore. This is the second time after buying Samsung Galaxy Win. Ty