Related
hi i have the sms to unlock
i start the unlocktool ...log in and then Your device isnt Support
my device MiMix
gorillalaci said:
hi i have the sms to unlock
i start the unlocktool ...log in and then Your device isnt Support
my device MiMix
Click to expand...
Click to collapse
Might be redundant to question, but you're logging in with the same credentials you used to request the unlock?
On the Smartphone i have log in with Phonenumber and password... The same on My Laptop
gorillalaci said:
On the Smartphone i have log in with Phonenumber and password... The same on My Laptop
Click to expand...
Click to collapse
Did you unlock Developer mode?
Did you enter your Mi account credentials under the Developer settings entry?
To unlock Dev mode, tap on the MIUI Build entry under "About Phone". You have to tap it 7 or 8 times.
Then when you go back out to the Settings menu, under Additional Setttings, you'll see Developer Settings. In the Developers Setting area you'll see Mi Unlock or something like that. Enter your credentials there
Under developers settings ist dont have this settings... I have Under MiAccount My Email My Number Name etc...
gorillalaci said:
Under developers settings ist dont have this settings... I have Under MiAccount My Email My Number Name etc...
Click to expand...
Click to collapse
Have you activated Developers mode?
Aeskulapio said:
Did you unlock Developer mode?
Did you enter your Mi account credentials under the Developer settings entry?
Click to expand...
Click to collapse
I don't see that entry, and I didn't have to do that to unlock my Mi Mix.
To the OP, in about phone, what does it say for Model number and MIUI version?
Yes i have activated developers... And Mi account credentials dont See in developers
I have the same problem. From my understanding you need to apply to unlock your device first in order to have that bind MI account in developer option. I just applied and they said it might take to 10 days to get approved
Bootloader unlocking
I don't want to argue the issue:
here is what I DID.
link here http://en.miui.com/thread-202290-1-1.html
Please make sure you're on official MIUI ROM to unlock
What you should do after received the approval SMS?
1) Settings---> About phone---> MIUI Version (Tap on it to enable developer option).
2) Settings---> Additional settings---> Developer option and bind your approved Mi account under Mi Unlock Status. This works on latest China & Global Stable and Developer ROM. For those who don't see this option please check out next tutorial and unlock in Developer ROM
I hope this helps, because for me it did
Cheers
J
Hi i dont have Under developers Option Mi unlock Status... No Option ist sie...
i Flash the developers cn and found under developers Settings MiUnlock ...
but the same Problem ....i Login to the UnlockTool and YOUR DeVICE ISNT SUPPORT
What can I do ???
gorillalaci said:
i Flash the developers cn and found under developers Settings MiUnlock ...
but the same Problem ....i Login to the UnlockTool and YOUR DeVICE ISNT SUPPORT
What can I do ???
Click to expand...
Click to collapse
So you received the SMS indicating permission to unlock?
And you entered the same credentials (login or MIUI ID number or cell phone number and password) you used to create MIUI account and request unlocking permission?
J
so the Problem is solve ...
i Log in to the Unlock Tool with my phone number ..the curios mistake was my number is ...0151******* my country Germany ...+49
in Germany must i write +49151*******
in the Unlock Tool must write +490151****
Curios but I been happy
I'm in Vietnam. I did by your guidance, but when i use +840989.... to login, it is unable to loging in. Only when i use +84988... it can be loging in.
did you check the device isn't already unlocked, alot with vendor roms have been unlocked already thats how they installed it.
Hi all.
IMPORTANT S7 T-Mobile and S8 T-Mobile are Qualcomm based and MY METHOD DOES NOT WORK. I WILL UPDATE WHEN/IF IT DOES
UPDATE 27.01.2018
MAGISK........
I am having trouble unlocking on phones with Magisk installed for ROOT
Nothing against Magisk, I personally use and love it. Feel free to install this AFTER UNLOCK
I'm just having trouble with the unlock using Magisk.
I am offering a free unlock via
I will still gladly accept any donations that come my way via PayPal ([email protected])
But DONATION is 100% OPTIONAL
All i ask is RESPECT and PATIENCE. (if these are not given then I may CHOOSE not to help you)
Remember this is taking time away from my wife and family to help YOU!
This is a FREE remote unlock service. AT YOUR OWN RISK.
No, I will not share my method..... as it could get patched by Samsung.
Here we go........
SEE CURRENT SUPPORTED MODELS AND FIRMWARES HERE
F.A.Q
Q. What if my IMEI is bad or blacklisted?
A. There are a few times of blacklist... T-Mobile seems to block INTERNAL only if non payment. Others will block if non payment or lost/stolen.
This does not effect SIM unlock, I can do it regardless.... However, you WILL NOT GET NETWORK SIGNAL IF BLOCKED
Check here for T-mobile https://www.t-mobile.com/verifyIMEI.aspx and also here for all models http://imei24.com/blacklist_check/
If you are not sure ask first!
Q. Can you change/repair my IMEI?
A. HELL NO. This is not only against XDA Rules but it is illegal in most countries, including mine.
Q. Is this really free?
A. Yes, although I do hope for a donation for my time and effort
Q. When are you available?
A. See below.
Q. Can we get on with it all ready?
A. Yes!
Remote Sim Unlock Preparation
Contact
Please be considerate of my time zone this it GMT +03 (UTC +13), check here NZDT https://www.timeanddate.com/time/zones/nzdt I am usually available after work 5PM until 8PM.
I am also available some weekends. Leave me a message on hangouts here with [email protected] and i will get back to you ASAP.
Please contact me when you are ready after reading below. Contact [email protected] via Google Hangouts.
If you do not have a reply within 24 hours then please email me with your gmail address on [email protected] and I will add you to hangouts.
Google Hangouts is needed so you can follow directions as I unlock your device. Everyone with a Google accounts has Google Hangouts.
You can access it via hangouts.google.com
Phone Settings ALL Models
Disable FRP by enabling OEM UNLOCK
http://techbeasts.com/how-enable-oem-unlock-android-lollipop-marshmallow/
Enable USB debugging
https://forum.xda-developers.com/fire-phone/general/guide-enable-usb-debugging-setup-t2859697
Revoke USB authorization (if applicable)
Developer Settings > Revoke USB authorization
GSM Only
Phone dialer > *#0808# > USB = AP
Phone dialer > *#0808# > USB SETTINGS = DM + ACM/MODMEM + ADB (note, will say ACM or MODEM)
If and only IF the above doesn’t work then try:
Developer Settings > USB Configuration > RNDIS (USB Ethernet)
SPRINT Only
Phone dialer > ##3424# >Qualcomm USB settings > DM + ADB + Modem
If the above asks for MSL or doesn’t work then try:
Developer Settings > USB Configuration > RNDIS (USB Ethernet) then we can get MSL to enable the above if you need MSL
For those that don't know... the 5th to last digit in the firmware is the BOOTLOADER (BL) version. YOU CAN'T GO BACK!!
i.e G920TUVU5EQC2 the BL version is 5 so you can't flash anything less than BL version 5
PC
You will need a Windows PC for the software. Please ensure you have Windows 7 or newer
Windows Vista and XP are NOT RECOMMENDED (for anything lol).
Please download FlexiHub http://www.eltima.com/wiki/user-guides/flexihub-windows/installation.html and install on your PC.
Please reboot after install.
Please create a FREE flexihub account here https://flexihub.eltima.com/user/registration/ AFTER ENTER DETAILS, YOU WILL SEE A PAYMENT PAGE... CLOSE WINDOW NOW. FREE ACCOUNT ALREADY CREATED
Or I have a few accounts if you wish to use one just let me know.
Please have FlexiHub open and logged in.
Unlocking Process
When you have contacted me and I have replied that we are ready you may proceed to:
Open flexihub and log in to your account
DO NOT SEND COM PORT. THIS IS USELESS TO ME ALONE
If needed click 'UNLOCK' on the phone's driver so it can be accessed (i.e Samsung_Android OR Gadget_Serial OR MSMxxxx)
Right click on your phone's driver in flexihub(i.e Samsung_Android OR Gadget_Serial OR MSMxxxx) and click send invite.
Type in [email protected] and click OK.
I will connect to the device and proceed from there.
Please watch phone for USB Authorization prompt.
Check the box then press OK.
I will disconnect and reconnect as required (using FlexiHub).
Watch phone Screen for SU (ROOT) prompt and press GRANT.
All you need to do is watch the phone for USB Authorization and ROOT grant.
Please follow the instructions I send via Google Hangouts
After we are finished you can return your device settings to as they were and you can remove FlexiHub from PC.
Please kindly donate via PayPal to [email protected] (once again 100% optional)
Nice work mate! Really useful!
Nice, but why no one tells us how to do it by ourselves? Does it require some secret hacks or what?
kapiszon53 said:
Nice, but why no one tells us how to do it by ourselves? Does it require some secret hacks or what?
Click to expand...
Click to collapse
If you will search good then you found it also in another sources "how to unlock"
rifek4 said:
If you will search good then you found it also in another sources "how to unlock"
Click to expand...
Click to collapse
Can you PM me a link please. I couldn't find anything
Are you available now ?
I can vouch for the man, He has done several of my devices And me being a bad lazy cheap person never did get around to donating to him,
He quickly and promptly unlocked again several devices.
Stifilz I need you donation link as I will glady donate for previous services you have rendered.
Im still doing this been very few at the moment :/
Still doing it and doing it well.
Thanks again mate!
I sent "a beer" your way.
dude please can u help me unlock my Samsung S6 SM-G920T ? actually i'm from indonesia but dont know why my devices cant retrieve any short message or getting phone call.
toleeq said:
dude please can u help me unlock my Samsung S6 SM-G920T ? actually i'm from indonesia but dont know why my devices cant retrieve any short message or getting phone call.
Click to expand...
Click to collapse
Dude, please read thread and contact properly
Awesome person, Canadian s6 unlocked for me, i will be donating because this person keeps their word, thank you
Everything worked great! He helped me with a canadian S6.
Thanks
Bump.
Still doing this.
Few changes made to thread for clarity,
Mainly........
SEE CURRENT SUPPORTED MODELS AND FIRMWARES HERE
Initial firmware requirements?
I am due to receive a Galaxy S6 (SM-G920F) which I think may be locked to O2 (UK). I don't know what firmware will be installed, however I suspect it will be the latest stock firmware. My intention is to install TWRP & Lineage 14.1, however I need it unlocked as I use Vodafone (it may well be unlocked but I won't know until I receive it and put my SIM card in it).
With regards to the specific firmware that is required for your 'procedure' I am guessing I would need to flash the 'combination' firmware .md5 file you have provided a link for on the spreadsheet from Odin? Then I'd need to run through the prerequisites and assuming all that goes smoothly I would then go through the procedure with you (assuming you are available).
Its just the initial firmware bit I am a bit confused over?
Cheers
Andy
unlock SM G920P
hello bro can u please unlock my s6 920p sim lock
is this still available
i have a SM-G920F
UK Version
Locked Sim
Could you get back to me and let me know if you or anyone can help me unlock it to any network.
cheers
John
So I bought a cracked screen LG stylo 3 TP450 before Christmas from Donation store. Turn out phone still work fine and i've been searching a way to bypass FRP since then.
So far i could get into setting and force stop Apps but i can;t find a way to soft reset yet.
Someone help me plz?
If you can get into Settings, then you should be able to get into a browser or a search box. In either, type Chrome and then open the Chrome browser. Once it's opened, go to the website: vnrom dot net/bypass
You'll see several files. The ones you'll need are:
Android_6_GAM.apk - Google Account Mananger, this lets you sign into your Google account
FRP_Bypass.apk - This bypasses the FRP
ES_File_Explorer.apk - If your device does not have a file manager
Install Android_6_GAM, open it and follow the prompts.
Install FRP_Bypass, reboot device and then set it up.
Once your device is set up, go into Android and reset your device to factory defaults from Settings. Set it up one last time.
Now you're done and the device is FRP locked to your google account instead.
youtu.be UHQ9Ftwt6ek for a video tutorial
Unknown sources won't turn on
nivex09 said:
If you can get into Settings, then you should be able to get into a browser or a search box. In either, type Chrome and then open the Chrome browser. Once it's opened, go to the website: vnrom dot net/bypass
You'll see several files. The ones you'll need are:
Android_6_GAM.apk - Google Account Mananger, this lets you sign into your Google account
FRP_Bypass.apk - This bypasses the FRP
ES_File_Explorer.apk - If your device does not have a file manager
Install Android_6_GAM, open it and follow the prompts.
Install FRP_Bypass, reboot device and then set it up.
Once your device is set up, go into Android and reset your device to factory defaults from Settings. Set it up one last time.
Now you're done and the device is FRP locked to your google account instead.
youtu.be UHQ9Ftwt6ek for a video tutorial
Click to expand...
Click to collapse
Ok can do but it's got the part about downloading from unknown sources to where can't switch it how do I change this.
lg stylo 3 plus unknown how to get unknown sources ungreyed
Ok can do but it's got the part about downloading from unknown sources to where can't switch it how do I change this. cuz i cant installanything i cant get developer opitions i cant do any of the steps with out it so how do you get it ungreyed in the first place . ive tried tools youtube and everything doesnt show me anything on how to activate unknown source i even saw something about external sources but i dont know someone anyone if you can tell me what i am missing that would really help m out
i am in the same delema bro. try this... yesterday i went on youtube and i couldent get unknown sources ungrey ether. this dude said that while you do these steps timing matters. if you dont get it right away try again faster to try n trip up unkown sources. i hope this helps us both.
Hello XDA-Community,
I've got a Yoga Tab 3 Pro YT3-X90L from a customer.
He was telling me, that he wanted to unlock his device with the pattern, mismatched for several times and now its locked and requires the owners google account. Or something like that. He never had the owners google account. He told me that his seller has activated his device for him. And he has no clue who it was.
Now here is my part.
I've researched and obviously it's a FRP. The owners google account information are stored in the FRP-Partition. And this partition won't get deleted with a simple factory resett.
What i've tried so far:
1.) https://www.youtube.com/watch?v=nCzrnnh2K1w I was able to follow this tutorial to minute 9:08. But the option "Email and password" is not there anymore. I guess they patched it with 6.0.1.
2.) I tried to flash a stock rom or twrp with LenovoDownloader(QcomDLoader). The stock rom file is: Lenovo_Yoga_Tablet_3_YT3-X90L_ENG_S200028_1609230146. even its a german device this file was the only one i could find. But the LenovoDownloader won't recognize my device. The windows stays white, no entries. I guess i installed the correct driver for this device and Windows recognizes them as removable device if i plug it in via usb.
3.) I've tried to use adb and fastboot boot oem unlock. But this commands aren't working in locked state.
4.) With a trick i could open the Settings and was full of hope to active the developer options to set usb debbuging to active. But this developer options aren't available either with this "user".
5.) There is an apk for showing the "Email and password" interface. I could install it, but it force closes right after starting it.
6.) I've tried several tools to bypass this FRP: WinDroid Toolkit, D-G Unlocker, Realterm, but NOTHING.
What could i do further? I'm out of ideas right now.
I've read about a factory_update.img but i cant find anything, except the stock rom file, for this device.
Or downgrading the device, so i could use the "Email and password" but. But i can't even flash the stock rom.
Specs for the device:
Lenovo Yoga Tab 3 Pro YT3-X90L
Lenovo/YT3_l0_row_lte
6.0.1/MMB29M/LenovoYT3-X90L_S200307_170614
i appreciate any help i can get
greets
redplate
I've wrote it down. Hope this helps.
Situation:
"Confirm account: The device has been reset. To continue, sign in with a Google Account that was previously synced on this device. "
Explanation:
The device has been blocked by repeated input of the wrong password, pattern, etc. and can only be unlocked with the Google account of the owner.
A factory reset or hard reset does not help here, as the account information is saved in its own FRP partition and will not be deleted when the factory state is restored.
Solution:
1. Connect device to a Wi-Fi and Internet access.
2. Before confirming "Next", select another hotspot here
3. Go to "Advanced Settings" and change the proxy settings of any hotspot to Manual.
4. In the text input field of the proxy settings you enter now any word: e.g. Test
5. Now mark this word and select "Assist" in the context menu.
6. Selecting this "Assist" option opens the Google search application.
7. You can now not only browse the Internet through this search, but also search for and open installed programs.
8. We are looking for Chrome, open the internet browser, go to www.google.com and search for DPC test.
Link: https://www.apkmirror.com/apk/sampl...-release/test-dpc-4-0-6-android-apk-download/
9. After downloading this application, go back to the Google search application.
10. Here we enter "Download" to search for the download application.
11. In Downloads we can now find and install the downloaded app.
12. To allow the installation of this .apk, you must allow the installation of "unknown sources" in the settings.
13. Either you go here on the installation itself on "Settings", or you search for "Settings" on the Google search app.
14. After completing the installation of the DPC-Test program, start it with "Open".
15. The app itself is will register as a device owner and now allows us to set up a new Google Account as owner.
16. If this is set up, it will also be included in the FRP partition.
17. In the event of a new factory reset, the device is reset, the DPC-Test program is removed and the device can be freshly set up in the factory settings.
after the takeover of the owner, the reason for blocking the device was not present anymore and the old owner was overwritten. This will be overwritten in the FRP partition aswell with the new account and the old one no longer queried.
You, mister, are my savior! Thank you very much.
Solve works for Lenovo Yoga 3 tablet
Just a big giant thank you! My dad passed away leaving me a Lenovo Yoga 3 tablet, unable to gain access due to information stored in the FRP partition. :highfive:
Hi
I followed your instructions for first 5 points
redplate said:
1. Connect device to a Wi-Fi and Internet access.
2. Before confirming "Next", select another hotspot here
3. Go to "Advanced Settings" and change the proxy settings of any hotspot to Manual.
4. In the text input field of the proxy settings you enter now any word: e.g. Test
5. Now mark this word and select "Assist" in the context menu.
6. Selecting this "Assist" option opens the Google search application.
Click to expand...
Click to collapse
I marked the word and only that is offered on the top right side is : SELLECT ALL - CUT - COPY.
There is no ASSIST option . I don't know, maybe this tablet on my desk has a newer android version with that option removed...
Is there any other solution? Probably will be helpfull for me as well for someone who will have tjis problem in the future
Thx in advance
marOOn1971 said:
Hi
I followed your instructions for first 5 points
I marked the word and only that is offered on the top right side is : SELLECT ALL - CUT - COPY.
There is no ASSIST option . I don't know, maybe this tablet on my desk has a newer android version with that option removed...
Is there any other solution? Probably will be helpfull for me as well for someone who will have tjis problem in the future
Thx in advance
Click to expand...
Click to collapse
Hi. Actually I'm not into this anymore. Could be possible they removed it since it might was reported.
If I have any idea I'll let you know it
I created a second account and got root working but the clicking on Build number does not open Developer options.
Does it only work for the owner?