Related
DO NOT FLASH HYDROGEN ROMS ON HELIUM, OR YOU GONNA HAVE A HARDBRICK.
IN CASE YOU HAVE ONE, HERE IS THE SOLUTION.
This was tested with Xiaomi Mi Max 128GB helium and localized rom from xiaomi eu.
I am not responsible for bricked devices or anything else. So at your own risk:
1. Install official MiPhone drivers
2. Download and install MiFash beta.
3. Download and unpack TWRP for miflash: 32gb or 64-128gb thanks @Abdess76.
4. Download ROM for your device, I recommend to try this one. You can install RR/CM Rom as well.
5. Run MiFlash with admin rights.
6. Turn off the phone, plug the cable to PC and halfway to the phone.
7. At the same time press Volume + and Volume - and plug in the cable.
8. Refresh MiFlash phone should show up. (If it didn't then make sure you did it right and u got drivers)
9. Navigate to your unpacked TWRP and flash it.
10. Now, boot ur phone with volume up. It's a bit slow. If it's stuck on miui logo, just release button and wait.
From here start to pay more attention:
11. TWRP can ask for password, press cancel and allow modifications by moving slider.
If you just need ROOT and your current rom, skip to the step 16. Also there is a recovery from boot in system folder. If you won't remove it, recovery may be replaced with stock one after reboot. Keep it that way if you want OTAs.
12. Format data.
13. Enable MTP and put modified zip in your phone.
14. Go to mounts and unmount system **
15. Flash your rom.
16. Flash latest supersu.
17. Reboot the phone.
In case u got NO OS message, then it means that u probably ignored step 15.
Also first boot may take like 15-20 minutes, since eu rom is deodexed.
Just to be sure, after installation mount system partition and navigate to the /system folder using TWRP's file manager and make sure it's not empty.
* In my case system didn't install because script could mount system partition since it was already mounted.
P.S. In order to update, you need to install OTA for offical rom via TWRP. Then without rebooting flash SuperSU, and finally using TWRP's file manager navigate to system folder and delete file named recovery from boot. Doing so will keep root and recovery.
Thank you so much for the guide! I will try it tonite
Waiting for boot loader is just too long..
WOW!!!! Just, wow..... I can not believe it but it worked like a charm. It took me forever to figure out my issue with the drivers, but after solving that I followed you step-by-step. And, lo and behold, it WORKED! Note for other users, Twrp took about a minute or two to finally boot up and it took me personally about 15-20 minutes before MIUI 8 finally booted. Just wait it out and you should have the amazing results that Doom Slayer has so graciously provided you
THANK YOU!!!!
I just done following your guide and it works!!
For rooting, I tried 2 times before it works. I believe you missed out a step to mount back system before flashing supersu.
So in the future, how do we dirty flash? Start from step 13?
How about clean flash? Start from step 12?
Thank you once again for this great guide!!
You saved me a lot of time waiting for Bootloader approval.
flywithme said:
I just done following your guide and it works!!
For rooting, I tried 2 times before it works. I believe you missed out a step to mount back system before flashing supersu.
So in the future, how do we dirty flash? Start from step 13?
How about clean flash? Start from step 12?
Thank you once again for this great guide!!
You saved me a lot of time waiting for Bootloader approval.
Click to expand...
Click to collapse
Yeah, dirty flash is you keep your data and format system and caches .
Clean flash is u format data as well.
The thing is that u have root, and ur phone is also secured. It's linked to ur Mi account, while it's locked. It's better to keep that way
Theoretically If you will ignore steps from 12 to 16. (Maybe u can ignore data formatting too)
Then you can get a ROOT and TWRP on your current rom.
And also theoretically while on miui 8 rom ,u can try to unlock bootloader without waiting.
Try this manual.
I have followed these steps and bricked my phone, spent the last 24h trying to recover it no luck.
I got an error while in the process of flashing the rom at step 16, then tried again and phone went black, stopped responding.
It's not detected using adb or fast boot, it appears in device manager as "Qualcomm HS-USB QDLoader 9008" or "Qualcomm HS-USB Diagnostics 900E", I have tried to flash again TWRP or the official ROM, it says success every time but the phone is still dead.
Could it be due to locked boot loader ?
agreusar said:
I have followed these steps and bricked my phone, spent the last 24h trying to recover it no luck.
I got an error while in the process of flashing the rom at step 16, then tried again and phone went black, stopped responding.
It's not detected using adb or fast boot, it appears in device manager as "Qualcomm HS-USB QDLoader 9008" or "Qualcomm HS-USB Diagnostics 900E", I have tried to flash again TWRP or the official ROM, it says success every time but the phone is still dead.
Could it be due to locked boot loader ?
Click to expand...
Click to collapse
Open it up and remove battery for a few minutes, then try again from step 6...
agreusar said:
I have followed these steps and bricked my phone, spent the last 24h trying to recover it no luck.
I got an error while in the process of flashing the rom at step 16, then tried again and phone went black, stopped responding.
It's not detected using adb or fast boot, it appears in device manager as "Qualcomm HS-USB QDLoader 9008" or "Qualcomm HS-USB Diagnostics 900E", I have tried to flash again TWRP or the official ROM, it says success every time but the phone is still dead.
Could it be due to locked boot loader ?
Click to expand...
Click to collapse
Which rom did u flash, give the link please.
Are u sure it's for your version? It can be a broken file as well.
Does the device connects when u hold both volume buttons?
It's called emergency download mode, u can istall rom with miflasher.
There is a testpoint method also.
All u need is a pic from this post on http://4pda.ru/forum/index.php?showtopic=749580&st=700#entry51154086
U need to disconect battery, connect testpoint to battery and flash ur device with miflash.
After that let it charge, since this in your state phone consumes battery.
thanks for you answer, I flashed the MiMAXPRO EU ROM xiaomi.eu_multi_MIMAXPro_6.8.4_v8-6.0.zip (sorry as a new user not allowed to post a link yet)
When I hold both volume buttons the screen is still black but MI Flasher works with COM10, after flashing a ROM or TWRP again MIFlash says "success" but the phone is still dead and won't start up even after holding power button for a long time.
I'm happy to open the phone and try the method on the russian forum, I will try tomorrow hope it will start up
agreusar said:
thanks for you answer, I flashed the MiMAXPRO EU ROM xiaomi.eu_multi_MIMAXPro_6.8.4_v8-6.0.zip (sorry as a new user not allowed to post a link yet)
When I hold both volume buttons the screen is still black but MI Flasher works with COM10, after flashing a ROM or TWRP again MIFlash says "success" but the phone is still dead and won't start up even after holding power button for a long time.
I'm happy to open the phone and try the method on the russian forum, I will try tomorrow hope it will start up
Click to expand...
Click to collapse
Don't worry about your phone, the testpoint method will work for sure.
But in order to prevent this kind of situations ,we need to determine the reason how did it happen and you need to help me with that one by answering following questions:
1) You have mentioned that you had an error 1st time.
I also had error which was cache related, and it's OK because that partition was just formatted. You tried to flash again... but did you unmount your system partition for second time?
2) What's the capacity of your internal storage?
3) Did you use internal or external storage? If external then I need the model and the file system that have been used on that storage.
Doom Slayer said:
Don't worry about your phone, the testpoint method will work for sure.
But in order to prevent this kind of situations ,we need to determine the reason how did it happen and you need to help me with that one by answering following questions:
1) You have mentioned that you had an error 1st time.
I also had error which was cache related, and it's OK because that partition was just formatted. You tried to flash again... but did you unmount your system partition for second time?
2) What's the capacity of your internal storage?
3) Did you use internal or external storage? If external then I need the model and the file system that have been used on that storage.
Click to expand...
Click to collapse
Hello,
I managed to recover the phone, I installed a fresh windows 7 on another PC with only MI Flash Beta installed, device appeared as "Qualcomm HS-USB QDLoader 9008" as usual and I flashed the china ROM. Not sure why it wouldn't start previously after flashing, maybe issue with drivers.
1) unfortunately I don;t remember the syntax of the error, it was after a few seconds of flashing but the process seemed interrupted, I even googled it but my browser history has been purged.
2) 64GB (Helium)
3)I used internal storage, copied the zip on the phone using MTP.
Might try to go through the process again this weekend.
agreusar said:
Hello,
I managed to recover the phone, I installed a fresh windows 7 on another PC with only MI Flash Beta installed, device appeared as "Qualcomm HS-USB QDLoader 9008" as usual and I flashed the china ROM. Not sure why it wouldn't start previously after flashing, maybe issue with drivers.
1) unfortunately I don;t remember the syntax of the error, it was after a few seconds of flashing but the process seemed interrupted, I even googled it but my browser history has been purged.
2) 64GB (Helium)
3)I used internal storage, copied the zip on the phone using MTP.
Might try to go through the process again this weekend.
Click to expand...
Click to collapse
Well, I guess system was mounted and it gived u the error,but formatted it.
hi to all of you. I am very interested by this thread. Here is the story. I received my brand new mi max helium this week but it was the chinese rom. I am in France and my country did not appear in the settings. So I wanted to flash a global rom. I plugged it to my pc in recovery mode and a window appeared said that there is an update. I clicked ok and after a while I got stuck in the mi logo bootloop.
Then from then I tried everything possible from several solutions here, but nothing worked. What I got is the mi logo without bootloop, but nothing more.
I get the message that the bootloader is locked, but I can't get it unlock if it is in this state.
What I can reach is the recovery mode and the fastboot mode. But nothing else worked, flash or anything.
That is why I am interested to flash a recovery, in order to flash a clean rom, etc..
I did what you, Doom Slayer, explains, but I could not get a twrp flash. It ends with "receiving hello packet" in mi flash, and every thing stopped.
If I cannnot install any recovery, I cannot flash a rom.
So please if you have any suggestion, it would be helpful. Thanks a lot.
alain belay said:
hi to all of you. I am very interested by this thread. Here is the story. I received my brand new mi max helium this week but it was the chinese rom. I am in France and my country did not appear in the settings. So I wanted to flash a global rom. I plugged it to my pc in recovery mode and a window appeared said that there is an update. I clicked ok and after a while I got stuck in the mi logo bootloop.
Then from then I tried everything possible from several solutions here, but nothing worked. What I got is the mi logo without bootloop, but nothing more.
I get the message that the bootloader is locked, but I can't get it unlock if it is in this state.
What I can reach is the recovery mode and the fastboot mode. But nothing else worked, flash or anything.
That is why I am interested to flash a recovery, in order to flash a clean rom, etc..
I did what you, Doom Slayer, explains, but I could not get a twrp flash. It ends with "receiving hello packet" in mi flash, and every thing stopped.
If I cannnot install any recovery, I cannot flash a rom.
So please if you have any suggestion, it would be helpful. Thanks a lot.
Click to expand...
Click to collapse
Did you disable drivers signature?
Also some people have a better luck on windows 7, u can try a virtual machine.
If you can enter EDL mode, then you should be fine.
Unless Chinese already disabled it in a new update.
I would blame drivers. Make sure u got them correctly.
Updated tutorial.
Uploaded TWRP for helium, so you don't need to edit updater script anymore, since script will get correct model.
Now you can try to get root on your current rom and unlock bootloader without Xiaomi's confirmation.
People having helium with unlocked bootloader may also have problems installing roms from xiaomi eu, if they have TWRP from hydrogen.
You may update using my recovery.img from archive using fastboot, or TWRP(will also work for locked bootloader).
Doom Slayer said:
Did you disable drivers signature?
Also some people have a better luck on windows 7, u can try a virtual machine.
If you can enter EDL mode, then you should be fine.
Unless Chinese already disabled it in a new update.
I would blame drivers. Make sure u got them correctly.
Click to expand...
Click to collapse
hi Doom. Thank you for reply. But what do you mean by " disable drivers signature". I did not do anything but install the drivers and when I am on what I think is EDL mode(screen isi black) the driver is recognized as Qualcomm HS-USB QDLoader 9008(COM20).
Anyway, I will give another try and let you know. Thank you again.
---------- Post added at 09:14 AM ---------- Previous post was at 08:22 AM ----------
I followed your guide and I could get the twrp installed. So I tried to install rom(following your link). It said rebooting in 5 seconds, and then nothing. The screen is black, no power anymore, no logo, no vibes, and no life at all.
I cannot get any more reaction from it. I plugged it to my pc, but nothing is connected. I was so happy with twrp working... Any idea?...
one more information I don't know if it can help, when I flashed first, I tried the "xiaomi.eu_multi_MIMAXPro_6.8.4_v8-6.0" and a message said "failed. This rom is for helium and this is hydrogen phone". Which is strange because mine is helium(4GB/128GB).
Then I tried with the "xiaomi.eu_multi_MIMAX_V7.5.6.0.MBCCNDE_v7-6.0" rom, and everything got ok, last message "success. The phone will reboot in 5 seconds", and from then, dead all over...
alain belay said:
one more information I don't know if it can help, when I flashed first, I tried the "xiaomi.eu_multi_MIMAXPro_6.8.4_v8-6.0" and a message said "failed. This rom is for helium and this is hydrogen phone". Which is strange because mine is helium(4GB/128GB).
Then I tried with the "xiaomi.eu_multi_MIMAX_V7.5.6.0.MBCCNDE_v7-6.0" rom, and everything got ok, last message "success. The phone will reboot in 5 seconds", and from then, dead all over...
Click to expand...
Click to collapse
Looks like you installed hydrogen TWRP and that caused all your problems.
I've been very careful to install the helium twrp from this thread...
Hi everyone!
I have bougth a Redmi Pro on Gearbest and it came with Chinese/English Version of MIUI.
After a week of usage, i turned off my xiaomi and when i turned back on, it stucked on a Mi logo. Far as i discovered searching on web, it was a bug that other peopel have reported too.
I took a opportunity of having this bug to fix, to put other rom on the phone. A rom with Portuguese language witch is my mother lang.
I tried to put the new rom via "SP Flash took" with the fastboot mod but without success.
I requested the unlocking on Xiaomi Unlocking site and when they repplyed and i connected the xiaomi to the computer, the program (XiaomiMiFlash) gave me an error message telling ""Couldn´t verify device. Current account is diferent from the account info in the device"
No i can´t do nothing with the phone.
Can you guys have some idea how can i solve this?
Thank you all!
There is a good chance that the phone is already unlocked.
What was the problem with fastboot? Maybe drivers issue?
Have you tried flashing TWRP? If it takes then the phone is unlocked and you can proceed with flashing the xiaomi.eu or globerom.
kremmit said:
There is a good chance that the phone is already unlocked.
What was the problem with fastboot? Maybe drivers issue?
Have you tried flashing TWRP? If it takes then the phone is unlocked and you can proceed with flashing the xiaomi.eu or globerom.
Click to expand...
Click to collapse
Tks 4 the support!
About the Fastboot i putted the phone on fastboot mode and i disabled the Driver Signature Enforcement on Windows. I connected the phone to the computer and started to run the SP Flash Tool. After the process was completed it wont gave me any result because the phone still stucked on Mi logo..
I did'n tried the TWRP because in every tutorial tells me that i need to go to the Developer Mode and activate the USB debugging i can not access to that because the phone don't give me more than the Mi logo.
hmm the fastboot method should have worked. Have you tried it on another computer, maybe 32bit windows?
When finished flashing with miflash in fastboot did it say it was ok at the end or did it give you an error? Als tried to reboot a few times after flashing without usb cable in the phone?
kremmit said:
hmm the fastboot method should have worked. Have you tried it on another computer, maybe 32bit windows?
When finished flashing with miflash in fastboot did it say it was ok at the end or did it give you an error? Als tried to reboot a few times after flashing without usb cable in the phone?
Click to expand...
Click to collapse
Im losing my mind!
I tried again in my father's desktop wich have a 64bit windows 7 (I havent a 32 bit at home. I will try to get one borrowed)
I tried with the SP Flash Tool following a guide from "xiaomitips" and, in this computer, the program dornt even recognize my phone. I push the Download button but that give me no signal.
Is there any other way to do this? Other ways to put the rom in the phone? (Sorry the noob language)
franciscobcl said:
Im losing my mind!
I tried again in my father's desktop wich have a 64bit windows 7 (I havent a 32 bit at home. I will try to get one borrowed)
I tried with the SP Flash Tool following a guide from "xiaomitips" and, in this computer, the program dornt even recognize my phone. I push the Download button but that give me no signal.
Is there any other way to do this? Other ways to put the rom in the phone? (Sorry the noob language)
Click to expand...
Click to collapse
I'm out of ideas at this point.
I had some trouble with fastboot that my phone did restart when in fastboot mode.
Then i had to change the order of plugging in the cable and starting the program but after that all worked.
No idea what next ...
I had this issue with a Redmi 3. I can't remember the exact solution but I believe you have to have the developer ROM installed in order to unlock the bootloader. Maybe if you search for an anterior model such as the Redmi 3 you will find more information on how to load your ROM. I'm sure that it's the same method for most Xiaomi phones. Good luck!
I heard about do a Hard Reset but i dont know how to do that because i cant access to the OS of the xiaomi.
Is there a way to do a hard reset with the xiaomi stucked on Mi logo?
Tks!
Happy 2017 for all!
I tried to put my phone one Recovery Mode but it is blocked. Its like the phone on this video:
https://www.youtube.com/watch?v=tTzdQpex7BQ
How can i unlock this?
I never could get into the xiaomi recovery either but i managed to flash twrp through fastboot though.
franciscobcl said:
Tks 4 the support!
About the Fastboot i putted the phone on fastboot mode and i disabled the Driver Signature Enforcement on Windows. I connected the phone to the computer and started to run the SP Flash Tool. After the process was completed it wont gave me any result because the phone still stucked on Mi logo..
I did'n tried the TWRP because in every tutorial tells me that i need to go to the Developer Mode and activate the USB debugging i can not access to that because the phone don't give me more than the Mi logo.
Click to expand...
Click to collapse
Hi
Does your problem with sp flashtools and flashing the ROM be solved ?
Sent from my Redmi Pro
I had this problem, but I'd installed TWRP already. But you shouldn't need USB Debugging on to flash TWRP. If you manage to flash TWRP, flash a new ROM (I recommend xiaomi.eu (I think they have Portuguese)) and wipe the Dalvik cache, /cache, and /data (you probably won't have to wipe /data/media).
Miui themes
Sorry will start new item
Have you tried a different cable, that is why mine wasn't recognized at first.
I'm having the same problem here. The phone rebooted itself when I changed the locale, and hung at the Mi logo. I already had TWRP flashed. I also took the opportunity to install a new ROM; the Global Dev ROM. It installed with no errors and I wiped the Dalvik, cache, etc. Still hangs at the Mi logo, but this time without the little loading dots at the bottom. Any suggestions?
Update: I can bring it back to the original state with the loading dots and "powered by Android" at the bottom with a backup I took before flashing the new rom, but still no progress.
I managed to restore my phone using the video:
Flash Xiaomi Redmi Pro Using SP Flash Tool [Locked Bootloader]
I can't post links since I don't have enough posts here yet, but search for it on Youtube.
Update: It seems like the unlocking permissions on my account have been retroactively rejected, I wonder if that has something to do with it. I also can't seem to find the Global ROM for the Redmi Pro anymore, just the China one. Does anyone have a link for the official Global ROM on the Xiaomi site?
Update 2: Suddenly I have unlock permission again, without reapplying, so that's cool. I installed the Eu HMPro ROM, everything's working well so far.
Phosphenes said:
I managed to restore my phone using the video:
Flash Xiaomi Redmi Pro Using SP Flash Tool [Locked Bootloader]
I can't post links since I don't have enough posts here yet, but search for it on Youtube.
Update: It seems like the unlocking permissions on my account have been retroactively rejected, I wonder if that has something to do with it. I also can't seem to find the Global ROM for the Redmi Pro anymore, just the China one. Does anyone have a link for the official Global ROM on the Xiaomi site?
Update 2: Suddenly I have unlock permission again, without reapplying, so that's cool. I installed the Eu HMPro ROM, everything's working well so far.
Click to expand...
Click to collapse
What I did bro ?
I still have the same problem?
franciscobcl said:
Hi everyone!
I have bougth a Redmi Pro on Gearbest and it came with Chinese/English Version of MIUI.
After a week of usage, i turned off my xiaomi and when i turned back on, it stucked on a Mi logo. Far as i discovered searching on web, it was a bug that other peopel have reported too.
I took a opportunity of having this bug to fix, to put other rom on the phone. A rom with Portuguese language witch is my mother lang.
I tried to put the new rom via "SP Flash took" with the fastboot mod but without success.
I requested the unlocking on Xiaomi Unlocking site and when they repplyed and i connected the xiaomi to the computer, the program (XiaomiMiFlash) gave me an error message telling ""Couldn´t verify device. Current account is diferent from the account info in the device"
No i can´t do nothing with the phone.
Can you guys have some idea how can i solve this?
Thank you all!
Click to expand...
Click to collapse
You could try dowloading the official rom and then download the CHINESE version of mipc suite then enter fastboot and connect the phone
Normally the chinese mi pcsuite automaticly detects the phone is in fastboot mode, you could use google translate to translate it all just choose redmi pro on model selector (the top selection bar)the text there is untranslateable just choose the one that says pro
And then under it chose the one that translate to chinese
After That there's two tick box under it, choose the ROM you downloaded
After that chose the one that translate to install brush package, if it doesn't work choose the download brush package next to it
Thus method worked for me when my phone bricked hope it helps you
Good evening! I hope you can help me.
I flashed LineageOS 14.1, but I wanted to go back to EMUI. I made all the wipes and tried to flash different stock firmwares through a forced update (volume buttons + power button), but it never worked. At that point, I read about a guy in this forum who suggested to create a flashable zip with Huawei Update Extractor: I followed the suggestion and tried to flash it with TWRP. No error was given, but when I tried to restart, TWRP told me I had no OS installed. I thought it was strange, so I tried to restart anyway. That's when I got in rescue mode. I can't get into the recovery and I can't use fastboot. What rescue mode shows me is:
RESCUE MODE
Attention!
Please update system again
Update User Guide:
*link*
*android avatar*
Error!
Func NO: 10 (boot image)
Error NO: 2 (load failed!)
Pressing the three buttons, I'm able to force an update. The problem is I can't find a firmware that doesn't get rejected. With Lollipop firmwares, it starts to install, but it fails at 12%. With Marshmallow ones, the installation process doesn't even start.
What can I do to make it work again? I'm very sad because this phone was gifted to me a couple of days ago and I already messed it up. I don't even know how to turn it off.
What can I do to get in fastboot mode? At that point, what should I do to flash the stock firmware? Or maybe do I need to find the first stock firmware ever installed into this phone to make the forced update work?
Please, I need help. Thank you in advance!
P.S. The phone's model is ALE-L21. I live in Italy, so I assume it's a European version.
Did you managed to fix this?
Jhon_Locke said:
Did you managed to fix this?
Click to expand...
Click to collapse
Not yet, but I'm working on it. I found out that the device is recognized by my PC if I follow these steps:
1. Connect the phone to the PC and wait for it to go in rescue mode;
2. Wait until the notification LED stops to blink;
3. Disconnect the USB cable;
4. Press volume - and power button;
5. Reconnect the cable.
At that point, the screen turns black and the phone is recognized as "㌲㔴㜶㤸". I installed the drivers and now it's recognized as "HUAWEI USB COM 1.0". I should be able to reflash the partitions and make my phone work again, but I'm still trying to understand how to do it correctly.
Any help is appreciated!
ErikChimello said:
Not yet, but I'm working on it. I found out that the device is recognized by my PC if I follow these steps:
1. Connect the phone to the PC and wait for it to go in rescue mode;
2. Wait until the notification LED stops to blink;
3. Disconnect the USB cable;
4. Press volume - and power button;
5. Reconnect the cable.
At that point, the screen turns black and the phone is recognized as "㌲㔴㜶㤸". I installed the drivers and now it's recognized as "HUAWEI USB COM 1.0". I should be able to reflash the partitions and make my phone work again, but I'm still trying to understand how to do it correctly.
Any help is appreciated!
Click to expand...
Click to collapse
fastboot detects your device when you plug it into your computer?
I mean, if you run "fastboot devices" it shows your phone?
I've had this same problem but with an P8 Lite 2017, after flashing some ROM that supposedly was the stock one and trying to flash recovery I ended up with my phone bootlooping into rescue mode, I was able to "bypass" this thing rebooting my phone like crazy, seriously like after 20 reboot it finally booted into the damn ROM and I never touched the phone again. Sometimes when the phone ran out of battery and tried to power it on the phone booted into rescue mode and again after some reboots it booted to Android but now I want to install a custom ROM or at the very least root this damn phone so that's why I'm asking you if you have solved this, if you do then probably if I follow the same steps I would be able to fix that screen, hopefully.
If you are able to flash something start with flashing all recoveries your update.app has, maybe that's the problem (at least in my phone it is).
Jhon_Locke said:
fastboot detects your device when you plug it into your computer?
I mean, if you run "fastboot devices" it shows your phone?
I've had this same problem but with an P8 Lite 2017, after flashing some ROM that supposedly was the stock one and trying to flash recovery I ended up with my phone bootlooping into rescue mode, I was able to "bypass" this thing rebooting my phone like crazy, seriously like after 20 reboot it finally booted into the damn ROM and I never touched the phone again. Sometimes when the phone ran out of battery and tried to power it on the phone booted into rescue mode and again after some reboots it booted to Android but now I want to install a custom ROM or at the very least root this damn phone so that's why I'm asking you if you have solved this, if you do then probably if I follow the same steps I would be able to fix that screen, hopefully.
If you are able to flash something start with flashing all recoveries your update.app has, maybe that's the problem (at least in my phone it is).
Click to expand...
Click to collapse
No, it doesn't show anything if I write that command...
I guess mine won't ever boot into the rom because it seems like there's no system installed. I made some researches and found out there are some softwares that let you reflash the partitions IF the phone is recognized as "HUAWEI USB COM 1.0". I'm still trying to figure out how to do it correctly though. I feel like if I do something wrong, then my phone won't probably turn on again.
In your case, you should be able to flash a custom rom without any issue. You just have to be very careful and inform you as much as you can: I don't want your phone to end up like mine?. Anyway, it seems pretty hard to go back to the stock rom, so think about it before you flash a custom rom. Also, make a Nandroid Backup is very important.
**EDIT**: Had to send the phone back as the bootloader was locked and nothing was flashing. I believe they EDL flashed it and all is good now. Unlocked the bootloader on the new one just in case this happens again, I will be able to fix
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
BACKSTORY:
Okay, so I recently updated to MiUI 12 and it wasn't great. My apps were crashing all the time and the general stability was not good. (this was around a week ago)
Then earlier today, my device just went into the boot screen (the colourful MiUI one) and stayed there for over 30 mins.
I forcefully restarted my phone using the volume buttons and it would go into the first "Mi powered by android" screen and then back into the colourful MiUI screen.
Then it would stay in the MiUI screen for a minute or so, and then restart itself, continually repeating the process.
At this stage, I had no custom recovery, had not tried to tinker with the phone (other than disabling some default apps through FastbootTools), and everything was fine until MiUI 12 came.
WHAT I DID:
I was able to access the default XiaoMi recovery (3.0?) and tried to wipe the data and restart, but nothing would change.
I tried to use the MiPC Suite after selecting in recovery, but it would recognise my device, even after updating to latest version.
I tried to use FastBootTools, but that would also not recognise my device.
I tried to use XiaoMiTool V2 (by Francesco Tescari), and that did recognise my device. I selected "my device is bricked" option and it did its thing, downloading and trying to sideload something. And then on the device, it got stuck at 4.99% with a message "You won't be able to turn on your device if you try to reboot it", and on the XiaoMiTool, the progress was at around 400% and said -70 seconds remaining, and around 40000MB / 3000 MB or something along those lines. Basically, **** was ****ed.
So I just let it sit there for a bit and then the XiaoMiTool V2 gave and error, "miui sideload failed adb execution exception adb sideload exited with status 1"
I had 3 options,
"Retry step"
"Go back to previous step"
"Cancel and abort"
I tried to search what the error was, but all of the results came from years ago, for different devices. So I clicked "Cancel and abort", only for the device to remain unchanged (4.99%, You won't be able to turn on your device if you try to reboot it), while the XiaoMiTool V2 went back to the start screen.
So I tried it again, the "my device is bricked option", and went through the same steps, and now it is stuck at "Pushing file to the device via ADB, ..., Starting MIUI sideload procedure".
Now I am stuck. My phone screen just says
"4.99%, You won't be able to turn on your device if you try to reboot it"
and my XiaoMiTool is stuck on the beginning sideload procedure.
Closing
If you managed to read this far, thanks, even if you don't have a solution. I appreciate anything that could help with this situation.
U could use the official tool by xiaomi and install your stock miui 12 rom, it's called miflash
Idk about downgrade if u wanted to flash miui 11 i heard there is some problems related to that so, always try official xiaomi tools first before trying other stuff
Ps : if it doesn't detect ur device in miflash there is a button called update or install driver I don't remember exactly press it and u should be fine
Badis st said:
U could use the official tool by xiaomi and install your stock miui 12 rom, it's called miflash
Idk about downgrade if u wanted to flash miui 11 i heard there is some problems related to that so, always try official xiaomi tools first before trying other stuff
Ps : if it doesn't detect ur device in miflash there is a button called update or install driver I don't remember exactly press it and u should be fine
Click to expand...
Click to collapse
I tried to install the drivers, and it says it was successful, but it still does not recognise my device in fastboot mode. However, it does seem to recognise my device in the default recovery, when selecting the "Connect with MiAssistant", which prompts to use the Mi PC Suite.
Any other ways to help it recognise in fastboot mode?
coolboy328509 said:
I tried to install the drivers, and it says it was successful, but it still does not recognise my device in fastboot mode. However, it does seem to recognise my device in the default recovery, when selecting the "Connect with MiAssistant", which prompts to use the Mi PC Suite.
Any other ways to help it recognise in fastboot mode?
Click to expand...
Click to collapse
Try another computer and another USB port...
The solution will benunder fastboot. You have to unclock your bootloader and flash a custom twrp or flash a stock rom using miflash
Hi, can you give any updates? I think i'm on the same boat. I have a Xiaomi Redmi Note 9 pro
EdoDT99 said:
Hi, can you give any updates? I think i'm on the same boat. I have a Xiaomi Redmi Note 9 pro
Click to expand...
Click to collapse
this is totally the wrong thread for ur device
So yeah, I screw up by a lot, but let's see if someone can help me/
I tried to update twrp on my phone and it got bricked, ADB was not seeing the device but Mi FlashTool was with a code but not COM, tried changing the phone drivers brom 900E to QL8000 and it got registered by MiFlashtool as COM and another code, the phone was still showing there even if I could not make the phone go to fastboot mode, just blackscreen; I tried to reinstall stock rom with it but got stuck at "flashing", disconnected the phone, the phone was still bricked in a black screen, when trying to reconnect the phone again to the pc, Win10 now displays an error
https://imgur.com/a/VS1yh6t
,
https://imgur.com/a/4PxUD7E
, I already tried uninstalling the device, deleting and reinstalling the drivers (unable because for some reason they won't appear now, but already tried installing the from their 1st party and prom MiFlashTool), so the phone won't turn on, display anything, go into recovery/fastboot, and I don't know what to do now, is the phone lost? I hope you can help me with this issue.
Hello Bro. Try install latest Mi Flash Tool latest version and then install the drivers. For my it's works in windows 10.