Hello together,
I have my Watch 2 relative new and am not yet familiar with all features.
Can I mute the alarm on the clock and make sure that only my Pixel2 rings in the morning and not both devices at the same time?
Thank you in advance,
Guy
Not sure if this is what you want, but on my Huawei Watch 1 I couldn't get my watch ringer to mute when my phone was muted, so I permanently turned the watch ringer down to 0 (off). If you never want to hear the alarm on your watch, you should be able to do the same.
Thanks for that realy easy tip.
Works perfect for me!
Related
Hi,
Is there software that can shutdown the device in x minuts?
I use to listen to same music in the bed.
Same times I got a sleep. :lol:
Next morning no battery :?
Anyone have a clue?
Regards
Josef
I fully understand you..
PhoneSnooze will turn off you GSM scheduled previously.
And SleepTimer will shutdown your pocket pc.. 8)
Good Night!
that was neat.. but what about the other one that automatically turns the phone on? i mean to recieve messages or sound the alarm? coz i understand that the alarm clock doesnt sound off when the phone is off..
The built-in alarm clock does sounds the alarm but doesn't turn on the phone... =(
TGShutdown - hear music and fall asleep with no worries
Hello!
I like too to hear music or podcasts, and with my HD2 even in flight mode and with the music finished, battery consumption is terrible!
I haven't found anything that fits my needs (simply a countdown and a shutdown after countdown finished), so I have written an app that does it:
http://forum.xda-developers.com/showthread.php?t=824434
BR!
Hello everyone !
I bought a HTC leo last week (such an amazing smartphone Oo), but, I have a small problem with it !
So, after setting up the alarm clock (Sound = Alarm-Snooze), when it comes the time, it doesn't do the right sound, but it does the sound of a simple reminder !!! That's a bit annoying... Such sound is not enought to wake me up xD
I have also another problem, when I set "Emit alarm when the phone is in vib/silencious mode" (sorry for the bad translation, but I've got my phone in French ^^'), it doesn't work !!!! Which is also annoying, because, when I sleep, my phone is in vib mode.
So, to resume, two problems :
- Setting a sound for the alarm doesn't work
- Setting "Emit alarm when the phone is in vib/silencious mode" doesn't work
How can I solve those problems ?
Thanks !
PS : Sorry for the bad English ~~
I would like to find a permanent fix for this as it's now annoying me BUT what I have found is that if you go into the sound settings area and leave it in normal but just turn down the phone volume leaving the system sounds turned on/up you will then get the notification tone followed by the alarm tone you select.
Highly annoying that your notification tone is played when you choose a different alarm tone though. also a big shame that putting the phone into silent doesn't allow the alarm to overide the sound settings as it does on nearly every phone i've had.
Haven't tried turning the phone off to see if the alarm wakes it up and then goes off though.
I used the alarm function on my old phone and it was great, it would ring and ring and ring for a minute every five minutes unless i hit snooze.
My new phone (Titan) has a terrible alarm, it can ring and vibrate and light up... for about thirty seconds, and then I get a wonderful little reminder that my alarm went off on my screen! Its such a great alarm that I was only a LITTLE late to school today.
Any help would be much appreciated.
I've been looking in the forum but have thus far not stumbled upon anything useful.
My alarm will repeat until I either snooze or turn it off.
Under clock and alarms, go to the alarms tab, then tap the bell on the alarm.
repeat will be an option as well as flash and vibrate. I use alarm5 for the sound. See if it works with that sound on your device....
Has anyone had the problem where the alarm on the alarm clock rings a single time and them stops ringing?
I have the checkbox in the control panel checked for repeat sound yet it seems to have started only ringing once (which is really annoying if you're a heavy sleeper).
Any help would be appreciated.
Yeah, I have that too. The only thing I've found it to be sure your reminders are on and it will remind you in a few minutes that you missed your alarm. Unfortunately the reminder tone will play at the end of your alarm tone as well so I picked a reminder that sounds OK with my alarm....
Hopefully someone will have a better solution.
p.s. I've noted that if attached to external power the alarm will repeat but if not, it won't. Seems it sleeps right after the alarm if alarm sounds when screen is locked and won't wake to continue the alarm.....
I suspected it was a power saving method but it's a pretty lousy method if it breaks the primary usage.
I decided to install a 3rd party alarm clock called Klaxon. It's free and it works great.
Hey guys, I need help...
Alarm on my Topaz doesn't ring when it is in stand by mode, it only light up screen and that's all.
Please help!
What have you done?
It always ring, and now stop ringing??? or what. Did you delete the sound file?
Is the phone in silent mode?
It always ring in stand by mode... now not. I have alarm sound. Phone is not in silent mode. And when i am doing something on phone, it rings. Only in stand by mode it doesn't ring.
Its a common issue for WM not to wake from Standby.
Try an alternative alarm program such as GAlarm or I have enclosed a basic Alarm ap which is supposed to wake from standby but I have not tested it yet.
Thanks for reply.
Is there any solution for this issue, or my only chance is to use third party app?
I have not found a solution other than 3rd party app.
Seems like all the power settings, tweaks etc. people have tried are not very consistent.