Get it in menu setup , but no luck after choose LTE all (see photo). How do this to enable 7 or 20 lte bands for lte networks in UK and Germany?
Hello, I am currently living in Toronto and would like to test the network coverage for WCDMA 850MHz only, because the phone I'm buying only supports WCDMA 850/2100 (my carrier uses 850/1900).
I tried using *#*#4636#*#* but this only gives me the option to switch between Japanese, USA and cellular bands and does not allow me to distinguish between individual bands.
I've tried googling this and no help has come up yet.
I'm currently on Purity 4.4.4 and Hell's Core.
I have the same issue. Traveling in India, and my US-bought Nexus 4 seems stuck on US frequencies. My coverage and signal strength are terrible and the phone can't hold a connection. I want to switch it to Indian frequencies.
I tried using an app called Radio Switcher which is just a friendlier way of accessing the hidden menu. However, under Select Radio Band, it only shows USA and Japanese bands, not Euro or Asia.
Running CyanogenMod 10.2.0-mako.
Hello,
I have been using my Meizu MX5 for about two months now without the 4G network working. I have recently updated to the latest firmware and I am currently running Flyme OS 4.5.2.7A and that has not solved any issues either.
I have checked that the phone settings are configured properly.
Network Mode is set to "4G First".
The phone is pending between, H-, H and H+ connection (3G I believe?)
I have checked with my provider and these are the following frequencies which should be providing 4G in my country (Sweden) for the provider:
800Mhz, 900MHz, 1800MHz, 2600MHz
Other providers have the same frequencies as well.
I have also gotten two new SIM-Cards during this period of time without it solving any issues. I have tried the SIM cards in some other phones and they get 4G connection without any issues.
I have been in contact with Meizu customer support in China and after some random troubleshooting of factory resetting and reinstalling the same firmware on the phone without solving anything.
They have also provided me information regarding the different bands/frequencies which the phone operates on:
GSM/GPRS/EDGE (900/1800/1900MHz)
WCDMA/HSPA+: Band 1/2/8 (900/2100MHz)
FDD LTE: Band 1/3 (1800/2100MHz)
TD-SCDMA: Band 34/39 (no freqency specified)
TD-LTE: Band 38/39/40/41 (no frequency specified)
I am not 100% sure on how this works but according to the information I am given, the phone and my provider share at least one frequency for the 4G network and therefore I do not understand why it is not working.
I am sure that it is software related and thus I won't send my phone back to China (4-8 weeks delivery time and all expenses has to be paid by me) for them to troubleshoot.
Anyone here who has knowledge which could give me an answer?
Kind regards,
Martin
Hi mate.
I had this problem but upgraded to new firmware late last night and it came on. Thankfully!
Give it a try
Hi,
I have checked the upgrade app on the phone and it says I have the latest firmware.
Which firmware version are you running?
Kind regards,
Martin
Maybe it is an APN related problem. Look if you have the same data as in the other phones that 4G works
iicc said:
Maybe it is an APN related problem. Look if you have the same data as in the other phones that 4G works
Click to expand...
Click to collapse
Hi iicc,
Thank you for the reply.
I have checked the APN settings about four-five times and I can't find any inconsistencies. I have even crosschecked it with a support technician from my provider.
The only things I can think of is either my anntenna being gimped, that the firmware is not properly developed or that somehow there's trash in my system and that my phone maybe needs a complete wipe and reinstallation.
After the upgrade to firmware 4.5.2.7A the phone does not even hint on trying to connect to 4G. Pre-upgrade it atleast connected to 4G for about 5 seconds and then went down to 3G.
Kind regards,
Martin
hawdes said:
Hi iicc,
Thank you for the reply.
I have checked the APN settings about four-five times and I can't find any inconsistencies. I have even crosschecked it with a support technician from my provider.
The only things I can think of is either my anntenna being gimped, that the firmware is not properly developed or that somehow there's trash in my system and that my phone maybe needs a complete wipe and reinstallation.
After the upgrade to firmware 4.5.2.7A the phone does not even hint on trying to connect to 4G. Pre-upgrade it atleast connected to 4G for about 5 seconds and then went down to 3G.
Kind regards,
Martin
Click to expand...
Click to collapse
And have you tried to factory data reset the phone?
hawdes said:
Hello,
I have been using my Meizu MX5 for about two months now without the 4G network working. I have recently updated to the latest firmware and I am currently running Flyme OS 4.5.2.7A and that has not solved any issues either.
I have checked that the phone settings are configured properly.
Network Mode is set to "4G First".
The phone is pending between, H-, H and H+ connection (3G I believe?)
I have checked with my provider and these are the following frequencies which should be providing 4G in my country (Sweden) for the provider:
800Mhz, 900MHz, 1800MHz, 2600MHz
Other providers have the same frequencies as well.
I have also gotten two new SIM-Cards during this period of time without it solving any issues. I have tried the SIM cards in some other phones and they get 4G connection without any issues.
I have been in contact with Meizu customer support in China and after some random troubleshooting of factory resetting and reinstalling the same firmware on the phone without solving anything.
They have also provided me information regarding the different bands/frequencies which the phone operates on:
GSM/GPRS/EDGE (900/1800/1900MHz)
WCDMA/HSPA+: Band 1/2/8 (900/2100MHz)
FDD LTE: Band 1/3 (1800/2100MHz)
TD-SCDMA: Band 34/39 (no freqency specified)
TD-LTE: Band 38/39/40/41 (no frequency specified)
I am not 100% sure on how this works but according to the information I am given, the phone and my provider share at least one frequency for the 4G network and therefore I do not understand why it is not working.
I am sure that it is software related and thus I won't send my phone back to China (4-8 weeks delivery time and all expenses has to be paid by me) for them to troubleshoot.
Anyone here who has knowledge which could give me an answer?
Kind regards,
Martin
Click to expand...
Click to collapse
Let me try to come up with something that might be your problem. If you are using 3 as your mobile provider then they use FDD-LTE band 7 & 20 none of which are supported by the MX5 and 3 are also using TDD-LTE band 38 which is supported by the MX5, but might not be available in your area.
If you are on Net4Mobility then they use FDD-LTE 3,7,8 & 20 of which only 3 is supported, so it could that in your area there is no coverage with band 3.
If you are on Telia, the story is pretty much the same as Net4Mobility as they use FDD-LTE 3,7 & 20.
In order to get more from your phone. You can open up google and search for 'meizifan eu' and go to the website. They have a pretty good description of how you install the international version of FlyMe on your MX5, the international version is called 4.5.2.7i. I believe it activates some other FDD-LTE and TDD-LTE bands.
1800Mhz band is a short range, higher bandwidth frequency which usually is less common and given that it has a short range it most likely isn't available in your area.
nasty_suicide said:
Let me try to come up with something that might be your problem. If you are using 3 as your mobile provider then they use FDD-LTE band 7 & 20 none of which are supported by the MX5 and 3 are also using TDD-LTE band 38 which is supported by the MX5, but might not be available in your area.
If you are on Net4Mobility then they use FDD-LTE 3,7,8 & 20 of which only 3 is supported, so it could that in your area there is no coverage with band 3.
If you are on Telia, the story is pretty much the same as Net4Mobility as they use FDD-LTE 3,7 & 20.
In order to get more from your phone. You can open up google and search for 'meizifan eu' and go to the website. They have a pretty good description of how you install the international version of FlyMe on your MX5, the international version is called 4.5.2.7i. I believe it activates some other FDD-LTE and TDD-LTE bands.
Click to expand...
Click to collapse
Thank you for the reply nasty_suicide!
I am using Comviq Tele2 as provider, which should use the Telia net.
This is what I believe as well, but I really thought there was no way to flash the international version onto the phone and was about to abandon ship by buying a new phone yet again.
I will try to install the International version as soon as I have time to follow through the steps. I have found the guide on Meizufans.
Once I have installed the international version I'll let everyone know the outcome.
Kind regards,
Martin
Hi Hawdes,
I've exactly the same problem as you do, please post back once you instal I version. I was planning to do so but since I already have everything installed I didn't want to go through trouble for nothing.
What were the results of this? Is it true that firmware can affect the signal received?
upgraded to the latest firmware yet?
Samsung galaxy s7 4G problem
What about in Samsung galaxy s7 version of Flyme OS?? I cannot see 4G option.
Is it possible to enable band 20 H990N?
Hi, I have the H990N model, I live in Spain and I have problems with 4G coverage.
In the specifications of the mobile it indicates that it has the band 20, but it only takes me in LTE band 3.
Is it possible to enable band 20 in my model ?. This frequency has greater coverage in my country
I'm Root.
If I enter inside the hidden menu, the band 20 appears, but if I select it, it appears fail as with the rest of the bands.
I would appreciate any help.
I have a ta-1083 with bands b7 and b28 blocked, I've searched in several places on google and still could not find something that can release these bands,
Has anyone with this problem been able to solve this problem?
I like the device, but it's already boring with this situation
Thank you all
No way. It's not going to happen. Quit wasting your time and buy another phone that has the bands you need.
Thanks for the answer, and this is very sad to read
6.1 plus supports all the bands. You can use this code *#*#4636#*#* to change bands and it works.
gopu5 said:
6.1 plus supports all the bands. You can use this code *#*#4636#*#* to change bands and it works.
Click to expand...
Click to collapse
Yes, it runs on 4g, but in bands like b5 and b3, but these are not standard here in Brazil, the network with the largest coverage is b7 that runs at 2600mhz,
So it fluctuates a lot between bands and often loses the signal altogether
I've changed a lot in these settings, but it doesn't solve 100%
JavaDroid_ said:
Yes, it runs on 4g, but in bands like b5 and b3, but these are not standard here in Brazil, the network with the largest coverage is b7 that runs at 2600mhz,
So it fluctuates a lot between bands and often loses the signal altogether
I've changed a lot in these settings, but it doesn't solve 100%
Click to expand...
Click to collapse
LTE only option you can choose
gopu5 said:
6.1 plus supports all the bands. You can use this code *#*#4636#*#* to change bands and it works.
Click to expand...
Click to collapse
No, you don't know what a band is. You can't use the test menu to add additional LTE bands. Kindly refrain from posting this idiocy here.
I know what is LTE Bands. 6.1 Plus supports all the bands but the fact it is configured in such a way the user can't change it hence the network switches bands automatically.
The LTE Only option configure the network to the 4G but yes you don't have the option to lock a particular frequency unlike other stock Android devices.
I dont know about other countries but here in India I use Jio 4G with 6.1 Plus my phone locks into 850Mhz , 1800Mhz & 2300Mhz (Jio supports it) simultaneously depending upon the conditions in my location.
The Android one might have disabled advanced band locking (FDD & TDD) feature. I'm not talking idiocy here.
gopu5 said:
I know what is LTE Bands. 6.1 Plus supports all the bands but the fact it is configured in such a way the user can't change it hence the network switches bands automatically.
The LTE Only option configure the network to the 4G but yes you don't have the option to lock a particular frequency unlike other stock Android devices.
I dont know about other countries but here in India I use Jio 4G with 6.1 Plus my phone locks into 850Mhz , 1800Mhz & 2300Mhz (Jio supports it) simultaneously depending upon the conditions in my location.
The Android one might have disabled advanced band locking (FDD & TDD) feature. I'm not talking idiocy here.
Click to expand...
Click to collapse
You are not talking about the same thing. The OP of this thread wanted to unlock bands that this phone doesn't normally support. We're not talking about "band locking".
Oh yeah this doesn't supports 2600Mhz