Related
Hi,
I have an LG G2 D802 and already installed TWRP 2.6.3.4 for installing zip-files. But now there is an update (only browser, but 4.4 shouldn't be that far away), but without stock recovery it's impossible to install it I know the way how to get back to stock completely, but I don't want to go back to stock every time there is an update, installing all of them and then reinstall TWRP. I think on CWM the problem is the same, but i don't want to miss the camera tweak and splitwindow, so I need an custom recovery for the zip-files:crying: Is there any way to get the stock recovery back without installing complete stock or at least a possibility, to only "boot" the custom recovery when I'm back on stock, like on Nexus devices, and only use it for the flashing and then lose it on the next reboot?
You should be able to push stock recovery via adb or even flashify ( I prefer adb tho). What build number do you have?
Sent from chdhsheh fhhdud
simon_lefisch said:
You should be able to push stock recovery via adb or even flashify ( I prefer adb tho). What build number do you have?
Sent from chdhsheh fhhdud
Click to expand...
Click to collapse
I have D80210a-EUR-XX. But where can I find the stock recovery? And btw: what was the adb command for flashing? With my Nexus 4 I only used the ToolKit, because I was never able to use adb through the normal Win7 cmd, only through the toolkit...
most likely, but cannot confirm it, you ooen a stock kdz, and try flashing the kernel .img thats inside, I am not sure
anyone confirm it works that way
Sent from my LG-D802 using xda app-developers app
for all I know, the kernel doesn't contain any recovery... but I will test it tomorrow, when I downloaded the kdz if you could say me how to open a kdz-file.
Artim_96 said:
I have D80210a-EUR-XX. But where can I find the stock recovery? And btw: what was the adb command for flashing? With my Nexus 4 I only used the ToolKit, because I was never able to use adb through the normal Win7 cmd, only through the toolkit...
Click to expand...
Click to collapse
here is a link to D802 recovery.img file i found, however its for the 10B build. you should be ok as i dont think the recovery has changed much from 10A to 10B, however i cannot confirm this. use this at your own risk, unless someone can confirm this will recovery will work.
simon_lefisch said:
here is a link to D802 recovery.img file i found, however its for the 10B build. you should be ok as i dont think the recovery has changed much from 10A to 10B, however i cannot confirm this. use this at your own risk, unless someone can confirm this will recovery will work.
Click to expand...
Click to collapse
If it's not working, I have a backup of the current. but I will test it tomorrow, then I have more time. But thanks for the quick answers.
Flashing the 10B recovery image worked well. But installing the update I only get an error so I go back to stock now.
I saw that flashify can flash zip files. Does it flash them itself or does it also need a custom recovery to flash them with it and flashify is only some sort of automtatisation? Then I could use this when I'm back on stock 10A (there seems to be no 10B for my device).
Artim_96 said:
Flashing the 10B recovery image worked well. But installing the update I only get an error so I go back to stock now.
I saw that flashify can flash zip files. Does it flash them itself or does it also need a custom recovery to flash them with it and flashify is only some sort of automtatisation? Then I could use this when I'm back on stock 10A (there seems to be no 10B for my device).
Click to expand...
Click to collapse
I've had similar problem, i think I just installed the KDZ file trough the way they showing: http://forum.xda-developers.com/showthread.php?t=2432476
It just erased the rooy and TWRP, and all of the apps and settings did not change, its like a repach.
at least it should be. but I can't take the last step. "By turning off, Holding down power and Vol Down until it comes up on the screen." doesn't works, there only starts the normal software, and that's the old one. And unpacking the kdz file with 7zip or Peazip also don't work. Peazip can do ist, but I have to find out how to let it extract it. After installing it, there is another file with the same name, but it's an .cab file with password. If I boot over widgetsoid into recovery (I think this is what the manual means) there is only a little droid with a read sign. How to get further?
EDIT: found out how to come into that menu. It wants to make a hard reset so I make an backup first.
Finally I was able to install the complete new software version (D80210e-EUR-XX) over the LG PC Suite. The file downloaded from the manual seemed to be corrupted or so as it only caused an unpacking error in the programm.
Does anybody knows a way how to flash a zip without a custom rom? Flash Gordon seems to not work.
So this may be a stupid question, but this is my first Nexus device. I will have a 6P delivered Thursday and plan to unlock, decrypt, and install TWRP. The guides so far reference using MDB08K, and the modified boot is only for this version currently. After I install TWRP, am I able to install the factory image for the latest MDB08M and just exclude flashing certain images? Or do I need to flash them all then wait for a new modified boot image for 08M and install TWRP over again?
geoff5093 said:
So this may be a stupid question, but this is my first Nexus device. I will have a 6P delivered Thursday and plan to unlock, decrypt, and install TWRP. The guides so far reference using MDB08K, and the modified boot is only for this version currently. After I install TWRP, am I able to install the factory image for the latest MDB08M and just exclude flashing certain images? Or do I need to flash them all then wait for a new modified boot image for 08M and install TWRP over again?
Click to expand...
Click to collapse
When I got mine the first thing I did was the OTA update and then I performed the root etc prcess
MrDSL said:
When I got mine the first thing I did was the OTA update and then I performed the root etc prcess
Click to expand...
Click to collapse
Its good to do this right away because when you unlock the bootloader, it wipes the phone. I haven't done this on mine yet because I'm curious about Android Pay and what impact that will have on it.
bitpushr said:
Its good to do this right away because when you unlock the bootloader, it wipes the phone. I haven't done this on mine yet because I'm curious about Android Pay and what impact that will have on it.
Click to expand...
Click to collapse
OH OH!!!! We have to behave, we have an Administrator with the same phone UGH!! Just kidding Hello @bitpushr
Somewheres around here someone is reporting pay working with unlock and root. If I recall correctly he removed root in su settings to add the card and then set back to root and it was working. Highly concerned individuals might want to verify that from multiple sources...
MrDSL said:
When I got mine the first thing I did was the OTA update and then I performed the root etc prcess
Click to expand...
Click to collapse
But don't you need to use the corresponding modified boot image to root it? There currently isn't one for the latest factory image I believe.
geoff5093 said:
But don't you need to use the corresponding modified boot image to root it? There currently isn't one for the latest factory image I believe.
Click to expand...
Click to collapse
Chainfire has one and I believe there is one in the development forum.
MrDSL said:
Chainfire has one and I believe there is one in the development forum.
Click to expand...
Click to collapse
I was looking at his thread, but I only see one for the 08K image.
http://forum.xda-developers.com/apps/supersu/wip-android-6-0-marshmellow-t3219344
The one in the dev section also appears to only be for 08K: http://forum.xda-developers.com/nexus-6p/development/kernel-stock-decrypted-kernel-verity-t3235013
I just wanted to confirm that these need to be the same, so I'll wait for an update.
I thought Build MBD08K was the latest..
I know that I'm currently running cleanrom MBD08K with modified MBD08K boot.img
Modified MBD08K boot.img from chainfire works fine with newest MDB08M. On my phone I unlocked bootloader, flashed all the MDB08M files, than flashed the modified boot.img.
I have working root, decrypted with TWRP installed.
mysongranhills said:
Modified MBD08K boot.img from chainfire works fine with newest MDB08M. On my phone I unlocked bootloader, flashed all the MDB08M files, than flashed the modified boot.img.
I have working root, decrypted with TWRP installed.
Click to expand...
Click to collapse
Awesome!! ????
mysongranhills said:
Modified MBD08K boot.img from chainfire works fine with newest MDB08M. On my phone I unlocked bootloader, flashed all the MDB08M files, than flashed the modified boot.img.
I have working root, decrypted with TWRP installed.
Click to expand...
Click to collapse
I assume if we have MDB08K, rooted with TWRP and want to take the OTA to MDB08M, that we can use a similar procedure:
1. Flash stock boot.img and recovery.img from MDB08K factory image (temporarily disabling root and TWRP)
2. Download and install OTA
3. Reflash modified MDB08K boot.img from Chainfire
4. Reflash TWRP recovery
5. Install SuperSU 2.52 using TWRP
Has anyone tried this method?
rsmolen said:
I assume if we have MDB08K, rooted with TWRP and want to take the OTA to MDB08M, that we can use a similar procedure:
1. Flash stock boot.img and recovery.img from MDB08K factory image (temporarily disabling root and TWRP)
2. Download and install OTA
3. Reflash modified MDB08K boot.img from Chainfire
4. Reflash TWRP recovery
5. Install SuperSU 2.52 using TWRP
Has anyone tried this method?
Click to expand...
Click to collapse
No, but your logic is sound. I see no problems doing it that way. Why would you prefer the OTA updates over the latest factory images? I know for me part of the reason I did it the way I did was b/c I couldn't get phone to download/recognize that OTA update existed.
In case anyone else is still wondering, flashing the 08M factory image and then using the 08K modified boot works fine. I'm on the latest and rooted right now.
mysongranhills said:
No, but your logic is sound. I see no problems doing it that way. Why would you prefer the OTA updates over the latest factory images? I know for me part of the reason I did it the way I did was b/c I couldn't get phone to download/recognize that OTA update existed.
Click to expand...
Click to collapse
I just thought this would be slightly easier than flashing the system.img from the factory image. However, given the modified boot.img and systemless SuperSU, I guess only flashing the system.img (and radio.img if changed) from the new build would probably be easier at this point. However, if xPosed comes to Marshmallow and modifies system, that will be another step in the upgrade process, which presumably would not need to be done if you could take the OTA the way I proposed.
Hey. I had rooted 5.1.1 Moto X Style and did a return to stock 5.1.1. eu version (relocked bootloader). After booted up, I received update to Marshmallow, I installed it. It worked. Later I wanted to root it, so I unlocked bootloader again and also did flash custom recovery - TWRP (twrp-2.8.7.1-clark). Later I restarted device and its was stuck on logo of Motorola. Nothing boots up.
Cant find solution for this. Thanks.
UPDATE:
Solved my issue here.
UPDATE2:
If there is problems upgrading your device to Marshmallow, I would suggest install custom ROM TruPureXMM with custom KERNEL Frankenclark. I am using this combo for long period of time and now I can suggest to others too!
Mine is having a similar issue. Mine took forever to boot at your stage because it formatted itself. Once I flashed SuperSU is where mine refused to boot. I have no idea what's going on either.
I am having the exact same issue. I updated to Marshmallow, installed TWRP (twrp-2.8.7.1-clark), flashed SuperSU and the phone hung on the Motorolla Logo at boot. I was still able to access the boot loader (holidng down the volume and the power button) and attempted to restore using http://forum.xda-developers.com/mot...ndows-tool-moto-x-style-pure-edition-t3199905. I was able to restore however now my wifi does not work and therefore I cannot update to Marshmallow OTA.
dgato said:
I am having the exact same issue. I updated to Marshmallow, installed TWRP (twrp-2.8.7.1-clark), flashed SuperSU and the phone hung on the Motorolla Logo at boot. I was still able to access the boot loader (holidng down the volume and the power button) and attempted to restore using http://forum.xda-developers.com/mot...ndows-tool-moto-x-style-pure-edition-t3199905. I was able to restore however now my wifi does not work and therefore I cannot update to Marshmallow OTA.
Click to expand...
Click to collapse
You need to reflash the LP radio from the restore all file ( NON-HLOS.bin ). That should do it.
I'm having the exact same issue. I'm so glad you posted. I gave up and used the restore-to-stock tool as well, but my Wi-Fi isn't working either. What is LP radio and how do I flash it? Now that I've restored to stock, I no longer have TWRP, and because I don't have WiFi, I can't update to Marshmallow.
JayShams said:
I'm having the exact same issue. I'm so glad you posted. I gave up and used the restore-to-stock tool as well, but my Wi-Fi isn't working either. What is LP radio and how do I flash it? Now that I've restored to stock, I no longer have TWRP, and because I don't have WiFi, I can't update to Marshmallow.
Click to expand...
Click to collapse
If you want WIFI on stock 5.1.1 you need to flash right modem for you.
You should download .zip file that contains all stock files, unzip it, and find "NON-HLOS.bin", thats modem file that you need.
Now boot into fastboot mode (power+volume down), and from PC use "fastboot flash modem NON-HLOS.bin"
Restart device, you should be okey now.
For XT1572 "STYLE" EU you can download this file: https://drive.google.com/file/d/0B3gPYUZ4nRLwTUU4cUVmcUtBTEU/view;
But for XT1575 "PURE" US use this file: https://drive.google.com/file/d/0B3gPYUZ4nRLwTl9Wd1JQX0hFejg/view.
If you are using other device, use this thread http://forum.xda-developers.com/moto-x-style/development/firmware-moto-x-style-pure-stock-t3272486 to find your device, but this threads links are very slow.
BooBzi said:
If you want WIFI on stock 5.1.1 you need to flash right modem for you.
You should download .zip file that contains all stock files, unzip it, and find "NON-HLOS.bin", thats modem file that you need.
Now boot into fastboot mode (power+volume down), and from PC use "fastboot flash modem NON-HLOS.bin"
Restart device, you should be okey now.
For XT1572 "STYLE" EU you can download this file: https://drive.google.com/file/d/0B3gPYUZ4nRLwTUU4cUVmcUtBTEU/view;
But for XT1575 "PURE" US use this file: https://drive.google.com/file/d/0B3gPYUZ4nRLwTl9Wd1JQX0hFejg/view.
If you are using other device, use this thread http://forum.xda-developers.com/moto-x-style/development/firmware-moto-x-style-pure-stock-t3272486 to find your device, but this threads links are very slow.
Click to expand...
Click to collapse
Terrific! It actually worked! Thank you.
Did you find a solution for it being stuck at Motorola logo? I was also stuck on that after installing TWRP.
ChadMan097 said:
Mine is having a similar issue. Mine took forever to boot at your stage because it formatted itself. Once I flashed SuperSU is where mine refused to boot. I have no idea what's going on either.
Click to expand...
Click to collapse
Looks like you flashed SuperSU but didn't flash the boot_root.img , or you can use the systemless root.
JayShams said:
Terrific! It actually worked! Thank you.
Did you find a solution for it being stuck at Motorola logo? I was also stuck on that after installing TWRP.
Click to expand...
Click to collapse
Nop, could find solution, so I did full wipe, and restored my backup file with 5.1.1. Also flashed stock logo, boot and modem, so it can boot my old 5.1.1. Moto.
Will wait for some kind of european ROM with Marshmallow, or TWRP update. Maybe later will try again to go fully stock and upgrade to Marshmallow, maybe will find something that will work, right now I just need my "phone" back so I can use it as daily driver.
I just finished flashing TruPureXMM. I'm in the middle of restoring all my apps, and I still need to re-fix the WiFi, but otherwise my experience is working well. You might want to check that out.
JayShams said:
I just finished flashing TruPureXMM. I'm in the middle of restoring all my apps, and I still need to re-fix the WiFi, but otherwise my experience is working well. You might want to check that out.
Click to expand...
Click to collapse
For wifi you should flash modem from his thread: https://www.androidfilehost.com/?fid=24269982087017262
Its Pure modem with band 12 fix.
I was using his Rom for some hours and didnt like it, my personal opinion:
Good: easy to install; twrp, supersu, xposed is working.
Bad: modified kernel (had more problems with it, it was draining battery so fast - 4 little cores was always online for ~900-1440MHz, and 1 big core always online for same frequancy as little cores, only one big core was going idle), so I didnt like all this modifications to stock kernel, also I didnt like that mine EU version now is listed as US version XT1575, and last that I noticed after some hours of usage is that on secret menu, mine 3G network was listed as WCDMA, but on EU of mine Style same 3G is using GSM auto method. I suppose that there can be some difficulties in EU countries - after changing settings to 4G, I loosed signal, and only after restart I got it back.
Thats the main reasons why I want european rom, or to modifie stock eu MM with xposed.
patt2k said:
Looks like you flashed SuperSU but didn't flash the boot_root.img , or you can use the systemless root.
Click to expand...
Click to collapse
I think in that case I did flash SuperSU the old way for Stock Moto Marshmallow. I then did a TWRP backup to go back to full stock and tried rooting using systemless, but something isn't right. It's showing up, apps are asking for permission, but its acting odd. The apps can't get permission and Viper for example just crashes and other apps just keep saying something is wrong. My TWRP is messed up to. It was pushed correctly, but it seems very unstable. I can't flash any ROMs and if I plug it into my computer to send a file, when I reboot it no longer shows it in my directory to install. Sometimes if I hit reboot device, it only reboots recovery or just ignores the command entirely. I think I will revert it back to moto standard and try again, but this has been a little weird.
ChadMan097 said:
I think in that case I did flash SuperSU the old way for Stock Moto Marshmallow. I then did a TWRP backup to go back to full stock and tried rooting using systemless, but something isn't right. It's showing up, apps are asking for permission, but its acting odd. The apps can't get permission and Viper for example just crashes and other apps just keep saying something is wrong. My TWRP is messed up to. It was pushed correctly, but it seems very unstable. I can't flash any ROMs and if I plug it into my computer to send a file, when I reboot it no longer shows it in my directory to install. Sometimes if I hit reboot device, it only reboots recovery or just ignores the command entirely. I think I will revert it back to moto standard and try again, but this has been a little weird.
Click to expand...
Click to collapse
Either do systemless or 2.52 had same issue til I flashed 2.52
Sent from my XT1575 using Tapatalk
Solved my issue here.
BooBzi said:
If you want WIFI on stock 5.1.1 you need to flash right modem for you.
You should download .zip file that contains all stock files, unzip it, and find "NON-HLOS.bin", thats modem file that you need.
Now boot into fastboot mode (power+volume down), and from PC use "fastboot flash modem NON-HLOS.bin"
Restart device, you should be okey now.
For XT1572 "STYLE" EU you can download this file: https://drive.google.com/file/d/0B3gPYUZ4nRLwTUU4cUVmcUtBTEU/view;
But for XT1575 "PURE" US use this file: https://drive.google.com/file/d/0B3gPYUZ4nRLwTl9Wd1JQX0hFejg/view.
If you are using other device, use this thread http://forum.xda-developers.com/moto-x-style/development/firmware-moto-x-style-pure-stock-t3272486 to find your device, but this threads links are very slow.
Click to expand...
Click to collapse
fastboot flash modem NON-HLOS.bin
Where and how do I type this? I have everything else done.
Hi,
I followed this instructions and I have two problems:
It only boots using flashboot boot boot.img (in fact I can't do the fastboot reboot-bootloader command because the previous command just boots the phone)
There's no wifi, I tried flashing the modem linked before but I think that's for 5.1.1 so it didn't work
donebrasko said:
fastboot flash modem NON-HLOS.bin
Where and how do I type this? I have everything else done.
Click to expand...
Click to collapse
For this you need adb files on your PC.
You should read this thread, for how to get this files on your PC.
Then:
Basically, open terminal within adb driver folder, connect phone via USB to PC with USB Debugging ON, and you are ready to go - boot your phone into fastboot mode (shut down phone first, and then power+volume down) and now your are ready to use this command: fastboot flash modem NON-HLOS.bin, but remember to put this "NON-HLOS.bin" file into folder where you opened terminal from.
But if you experience problems, I suggest just install TruPureXMM ROM. It whould be much easier!
Good luck!
Kennyeni said:
Hi,
I followed this instructions and I have two problems:
It only boots using flashboot boot boot.img (in fact I can't do the fastboot reboot-bootloader command because the previous command just boots the phone)
There's no wifi, I tried flashing the modem linked before but I think that's for 5.1.1 so it didn't work
Click to expand...
Click to collapse
Hello!
Have you read my other thread?
I have explained all my steps there, my device is Moto X Style (XT1572).
But I can suggest also use TruPureXMM ROM. Right now I am using this rom for about month, you could try it!
Good luck!
No luck with reflashing NON-HLOS.bin
I tried systemless root on my moto x pure marshamallow. Now the wifi is not working at all. I tried reflashing the NON-HLOS.bin but no luck there. Is there any way to solve this issue? Or should i revert back to lollipop seems like it is working just fine for others on lollipop.
[email protected]@lker said:
I tried systemless root on my moto x pure marshamallow. Now the wifi is not working at all. I tried reflashing the NON-HLOS.bin but no luck there. Is there any way to solve this issue? Or should i revert back to lollipop seems like it is working just fine for others on lollipop.
Click to expand...
Click to collapse
Lets start from beginning.
What is your device codename (region)?
if you are like me you already realized that running odin again to install, CF-Auto-Root-herolte-heroltexx-smg930f.zip won't do anything.
1) put SuperSu zip file somewhere on your phone (https://download.chainfire.eu/964/SuperSU/BETA-SuperSU-v2.74-2-20160519174328.zip)
2) you will need to reinstall twrp-3.0.2-1-herolte.img.tar via odin AP but don't auto reboot (https://dl.twrp.me/herolte/twrp-3.0.2-1-herolte.img.tar.html)
3) manual reboot and IMMEDIATELY go into recovery by holding down the magically combination. if you missed it then you will have to do step 2 again.
4) once in recovery install supersu zip from step 1 and you will get root back
should work for s7 edge (935) too but you will need to use the correct files
hope that help
nice thread, but can i flash a recovery via recovery?, because my usb port wont work :\
nwm found it!
i tried, but still cannot get root back.
derbysig said:
i tried, but still cannot get root back.
Click to expand...
Click to collapse
OP has missed one step.
You have to flash boot.img from official samsung firmware through TWRP(if you have TWRP installed) or you can install through odin. Make sure that your build number matches with firmware file. You have to do this before you are going to reinstall TWRP. After flashing boot.img file you will stuck in bootloop don't get panic. Flash supersu along with encryption disabled file attached in link. Then boot into android. You would definitely see supersu along with superuser script installed. No you have root access. Cheers
http://cloud.tapatalk.com/s/5745e40dd9c07/no-verity-opt-encrypt.zip
Sent from my SM-G930F using Tapatalk
gnan10 said:
OP has missed one step.
You have to flash boot.img from official samsung firmware through TWRP(if you have TWRP installed) or you can install through odin. Make sure that your build number matches with firmware file. You have to do this before you are going to reinstall TWRP. After flashing boot.img file you will stuck in bootloop don't get panic. Flash supersu along with encryption disabled file attached in link. Then boot into android. You would definitely see supersu along with superuser script installed. No you have root access. Cheers
Where do i find the original samsung stock boot img?
Click to expand...
Click to collapse
ALH20 said:
gnan10 said:
OP has missed one step.
You have to flash boot.img from official samsung firmware through TWRP(if you have TWRP installed) or you can install through odin. Make sure that your build number matches with firmware file. You have to do this before you are going to reinstall TWRP. After flashing boot.img file you will stuck in bootloop don't get panic. Flash supersu along with encryption disabled file attached in link. Then boot into android. You would definitely see supersu along with superuser script installed. No you have root access. Cheers
Where do i find the original samsung stock boot img?
Click to expand...
Click to collapse
Get from sammobile.com
U can download any samsung firmware from there. You will have to just search your device name to show the relevant builds. Makes sure that your build number (on your phone settings-->About-->build number ) is same as the file you are going to install
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
Hi i am on 11.0.7.7IN11AA rooted with magisk patched boot.img. i have received the update for 11.0.8.8IN11AA.
Has anyone been able to install and re-root with no issues? Please kindly explain your steps.
paq1170 said:
Hi i am on 11.0.7.7IN11AA rooted with magisk patched boot.img. i have received the update for 11.0.8.8IN11AA.
Has anyone been able to install and re-root with no issues? Please kindly explain your steps.
Click to expand...
Click to collapse
After the update, i flashed the patched boot.img using fastboot command. Assuming no modules are conflicting you should have a rooted device. The one module that created a problem for me was OOS NATIVE CALL RECORDING. Disabling it solved any issue.
MrEvilPanda said:
After the update, i flashed the patched boot.img using fastboot command. Assuming no modules are conflicting you should have a rooted device. The one module that created a problem for me was OOS NATIVE CALL RECORDING. Disabling it solved any issue.
Click to expand...
Click to collapse
How did u root on 11.0.8.8?
Do I have to repeat the process of downloading stock ROM, using payload dumper to get boot.img, patching it on magisk and flashing on fastboot?
Sneakdovi said:
How did u root on 11.0.8.8?
Do I have to repeat the process of downloading stock ROM, using payload dumper to get boot.img, patching it on magisk and flashing on fastboot?
Click to expand...
Click to collapse
Yes i had to use the payload dumper to get the boot.img and then pacth it using the magisk manager and then flashing using fastboot commands.
MrEvilPanda said:
Yes i had to use the payload dumper to get the boot.img and then pacth it using the magisk manager and then flashing using fastboot comma
Click to expand...
Click to collapse
What if i just uninstall magisk(unroot), download and install the update, download only the boot.img then patch and get root?
I am trying to avoid downloading whole stock rom because of the boot.img when i can just download it alone.
paq1170 said:
What if i just uninstall magisk(unroot), download and install the update, download only the boot.img then patch and get root?
I am trying to avoid downloading whole stock rom because of the boot.img when i can just download it alone.
Click to expand...
Click to collapse
We only need the boot.img(correct one) to proceed with root no need to download the entire stock rom.
Where are you guys getting 11.0.8.8IN11AA? Full zip?
Nothing on Oxygen updater for me yet.
Hey guys, so I've installed the new OTA, then went to magisk, installed magisk to inactive slot, rebooted and now the only thing happening is boot logo spinning....
what to expect? ofc, i didn't do a backup beforehand...
datnewnew said:
Hey guys, so I've installed the new OTA, then went to magisk, installed magisk to inactive slot, rebooted and now the only thing happening is boot logo spinning....
what to expect? ofc, i didn't do a backup beforehand...
Click to expand...
Click to collapse
Things like this makes me so cautious and ask so many questions. Hope you didnt soft brick your device?
Okay it worked out somehow, i was looking for a stock boot.img, and was gonna flash that to try and save it, but had trouble with my pc recognizing my oneplus in fastboot mode, so i pressed both vol up/down and power at the same time to while being connected with usb cable, to try and get into fastboot, then screen went black but my PC got some pop ups for recognizing a device with unavailable drivers, then i just press vol up and power after a minute of it being black, phone rebooted and it loaded past the booting animation into android... weird stuff worked out, even after a dozen reboots with hardware keys, even letting it spin the animation for an hour...
I'm never updating again ahahhah
edit: if you do update, make sure you disable all your magisk/xposed addons and some native os call recording module... thats what i learned while googling yesterday, and its something i did not do, that could of have possibly contributed to my headaches
What i ended up doing that worked was;
. Flash stock 11.0.7.7 boot.img to slot A & B to unroot the phone.
. Reboot and install the ota update. I had no magisk modules to uninstall.
. After updating i downloaded the stock boot.img for 11.0.8.8 then patched and flashed to get rooted again.
Its a longer process but quite safer for me.
It's the same on each firmware, providing you have the full update available to you.
Use oxygen updater and grab the full update, download and install but don't Reboot.
Open Magisk send install after OTA.
Then reboot.
If you're unable to grab the full update then probably best to update then boot lineage recovery and sideload Magisk.zip using lineage recovery, then flash and you're done.
Could someone post boot img I can't find this 11.8.8 to download.
Thanks.
Mchlbenner51 said:
Could someone post boot img I can't find this 11.8.8 to download.
Thanks.
Click to expand...
Click to collapse
Same here please, cant find the 11.0.8.8.IN11AA anywhere.
If 8.8AA is in oxygen updater (full update)
Then make your own, using someone else's comes with inherent issues and risks.
It's good practice to make your own.
h4x3r101 said:
Same here please, cant find the 11.0.8.8.IN11AA anywhere.
Click to expand...
Click to collapse
Go here: https://forum.xda-developers.com/t/...magisk_patched-boot-img.4255757/post-85522541