Hello there guys, i have owned three different galaxy variants namely : m110s,m130k and gt-I9000. So far, its been a wonderful experience flashing and modifying except for the korean variants. ever since i softbricked my m130k, finding resources for it has been a headache, and all the people, including some guys here in xda are not that interested in the other lowly variants of galaxy s, even if they're also using korean variant like m110s. i have compiled some resources and links and i will post them one by one as i have the time. for now, im just asking all of you guys out their to help in making posting and helping out people using the said korean phones.
up until now, i haven't fixed my phone yet, i badly need the other files missing in the roms available in the internet, like dbdata.rfs and the likes.i know many guys using the same phones have also encountered such problem. anyway i would like to post this link, for those guys willing to use ADB or Heimdall and post some of their own phone files. thank you
>>>>>link for instructions in extracting phone files<<<<<<<<<<<<<<
http://www.freeyourandroid.com/guide/building_roms_for_odin
ill also upload my own collected files as we go along.Thank you all. Attached here is a pit for m130k extracted using Heimdall.i have already used it and it can successfully repartition your device, note however that we cannot use the roms found in the internet because they only contain factory,zimage and modem file, so repartitioning will indeed BRICK your unit unless you use a complete rom fil for m130k.
e:/ cant mount /efs (shw-m130k)
hello guys. just giving an update on those persons having problems with their m130k. specifically the e:/cant mount issue. so far ive always been in the wrong direction. my phone was already working but it just keeps on resetting the settings on power up, as well as i cannot save anything on internal sd (it was detected as 0 bytes). so i searched and found possible solutions in pit. so i downloaded pit using heimdall, and used it to repartition my system. however, as worse comes to worse. this caused my phone to not go past the recovery screen, not being able to use my phone again and the cant mount error still occurred. in short, it made my problems worse. so i did some research and out of frustration, i tried using the EA20 revision for m130k. after flashing, all the cant mount error vanished. however, because i used repartition earlier, i still cannot go past the recovery console and the galaxy k logo is gone, replaced by anycall talk-love logo.
so for those who are in the same position as me and haviong cant mount problems,
i suggest using EA20 first to fix your phone and PLEASE do not REPARTITION. and for those who can give me a hand, ill appreciate that. thank you
pulling data from ADB for possible recovery
dd if=/dev/block/bml1 of=/sdcard/boot.bin bs=4096
dd if=/dev/block/bml2 of=/sdcard/pit.pit bs=4096
dd if=/dev/block/stl3 of=/sdcard/efs.rfs bs=4096
dd if=/dev/block/bml4 of=/sdcard/Sbl.bin bs=4096
dd if=/dev/block/stl6 of=/sdcard/param.lfs bs=4096
dd if=/dev/block/bml7 of=/sdcard/zImage bs=4096
dd if=/dev/block/stl9 of=/sdcard/factoryfs.rfs bs=4096
dd if=/dev/block/stl10 of=/sdcard/dbdata.rfs bs=4096
dd if=/dev/block/stl11 of=/sdcard/cache.rfs bs=4096
dd if=/dev/block/bml12 of=/sdcard/modem.bin bs=4096
adb pull /sdcard/boot.bin
adb pull /sdcard/pit.pit
adb pull /sdcard/efs.rfs
adb pull /sdcard/Sbl.bin
adb pull /sdcard/param.lfs
adb pull /sdcard/zImage
adb pull /sdcard/factoryfs.rfs
adb pull /sdcard/dbdata.rfs
adb pull /sdcard/cache.rfs
adb pull /sdcard/modem.bin
some ADB commands i saw for pulling files and possible creation of recovery rom
mms.apk
can you sirs provide me a stock mms.apk and tw.launcher for the m130k plsssss
i accidentally uninstalled it and have no backups for it
check this out guys... m130k.blogspot.com
shwm 130
hello guys. im using a LG shwm130L anycall. it was factory reset by accident now its in korean languages. Im really really badly needed your help. My sis gave this to me and its very valuable.
ryenneinaho said:
hello guys. im using a LG shwm130L anycall. it was factory reset by accident now its in korean languages. Im really really badly needed your help. My sis gave this to me and its very valuable.
Click to expand...
Click to collapse
just press menu button, press settings and scroll down to keyboard letter "A" icon press it and press the top most menu to switch to English.
Check this out! Links to useful Guides and " Banned " Documentaries
hi guys
as you all know that some of the devices (i9300i) are hard bricked by flashing indian 4.4.4 so to unbrick we need a debrick.img which you guys can help us get by flashing this file https://copy.com/1ggUuyIqHUrF it will create a debrick.img into your sd card which you can upload and share
source http://forum.xda-developers.com/show....php?t=2439367
OR
Use this procedure to create the image
Enable USB Debugging.
Open cmd and navigate to your adb folder.
Run adb shell
Now type 'SU' to enable superuser, your may have to grant access to ADB from a popup screen of your phone's superuser app
next copy and paste the following code and change the phone model to your phone i.e. dd if=/dev/block/mmcblk0 of=/sdcard/debrickI710-16GB.img bs=1M count=128
dd if=/dev/block/mmcblk0 of=/sdcard/debrick[phonemodel-memorysize].img bs=1M count=128
6. Now type Exit on cmd and then use following the command to copy this image to your adb folder
adb pull /sdcard/debrick[phonemodel-memorysize].img
7. upload the image and share its link here.
[B]It will just take few minutes further you can compress the file (zip or rar) to reduce its size so that it can be upload easily.[/B]
Thanks in advance
:crying: i need it plz else my device will be useless
cmon guys it will not take more than 5 min plz help if it works ill make a thread about how to unbrick a hard bricked neo
I Hope it can helps you ...
I just run it on GT-i9300i ( Brazilian ) with Lastest HongKong 4.4.4 firmware + root and TWRP 2.7.0.1
Just tell me if you need anything else my friend.
PHP:
https://mega.co.nz/#!DVcSTA7R!0D0ah1pSaJzORvU95on2eyPxkE_866M2Ea0NmngPQX4
ygor.almeida said:
I Hope it can helps you ...
I just run it on GT-i9300i ( Brazilian ) with Lastest HongKong 4.4.4 firmware + root and TWRP 2.7.0.1
Just tell me if you need anything else my friend.
PHP:
https://mega.co.nz/#!DVcSTA7R!0D0ah1pSaJzORvU95on2eyPxkE_866M2Ea0NmngPQX4
Click to expand...
Click to collapse
thank u soooo much bro i just successfully un brick my device tomorrow i will make a thread again thanks for ur time and million thanks to u :laugh:
Hi, I've used your CWM script but it doesn't have created the ZIP file with the debrick image.
I've searched it on all memories (also the system folder) but nothing. I've a GTI9301I ITV Firmware UANI1
I've tried also the adb shell and when i type adb pull /sdcard/debrick[phonemodel-memorysize].img it show me no devices (but it's enabled and the phone receive correctly commands)
G4 ** H815EUR **
Bootloader Unlock-/Relock Guide
* DISCLAIMER
Read carefully before proceeding !
Doing this will void your warranty and can permanently damage your device !
You take full responsibility if you brick your phone !
Only proceed at your own risk !
* REQUIREMENTS
All the things you need . . .
A H815EUR device with locked bootloader!
unlock.bin generated via official unlock method (http://developer.lge.com/resource/mobile/RetrieveBootloader.dev)
Enable OEM unlock and USB debugging activated (Settings > Developer options)
Android SDK (adb.exe, AdbWinApi.dll, fastboot.exe) installed
LGUP (https://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803)
A KDZ for H815
LGROOT (send_command.exe) (http://downloads.codefi.re/thecubed/lg_g4/lef/LG_Root.zip)
LG Mobile Drivers (http://www.lg.com/us/support/software-firmware-drivers)
* STEP 0
Get the Device-ID for generating unlock.bin file !
Reboot the phone into fastboot mode - in cmd.exe type
Code:
adb reboot bootloader
Show the Device-ID for unlock.bin request !
Code:
fastboot oem device-id
Show current bootloader state !
Code:
fastboot getvar unlocked
> unlocked: no
Reboot the phone . . .
Code:
fastboot reboot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
* STEP 1
Enable send_command.exe to backup the partition data !
Start LGUP to enable send_command.exe - NOTE - make sure to select ** UPGRADE **
Start flashing and prepare to pull the USB cable to disconnect the phone . . .
Disconnect the phone as soon as COM appears on the display !
Close LGUP and reconnect the phone . . .
* STEP 2
Backup the drm, misc and persistent partitions !
In cmd.exe navigate to send_command.exe and enter
Code:
send_command.exe \\.\[COLOR="Green"]COM[your port number here][/COLOR]
Dump the partitions to the internal storage of the phone . . .
Code:
dd if=/dev/block/mmcblk0 of=/data/media/0/drm.img bs=512 skip=655360 count=16384
dd if=/dev/block/mmcblk0 of=/data/media/0/misc.img bs=512 skip=262144 count=32768
dd if=/dev/block/mmcblk0 of=/data/media/0/persistent.img bs=512 skip=380928 count=4096
For safety, make a full dump of all partitions !
Code:
dd if=/dev/block/mmcblk0 of=/data/media/0/full_dump.img bs=4096 count=1552384
Set the permissions and owner for the files !
Code:
chown -R media_rw:media_rw /data/media/0
chmod -R 0666 /data/media/0
Partition dump complete ! To finish enter
Code:
LEAVE
Remove the battery and restart the phone . . .
* STEP 3
Copy the drm, misc and persistent partition images to your computer and/or SD card !
Check the file size of the partition images !
Code:
[B][COLOR="Magenta"]drm.img[/COLOR][/B] = [B]8.00 MB[/B] (8.388.608 Bytes)
[B][COLOR="Magenta"]misc.img[/COLOR][/B] = [B]16.00 MB[/B] (16.777.216 Bytes)
[B][COLOR="magenta"]persistent.img[/COLOR][/B] = [B]2.00 MB[/B] (2.097.152 Bytes)
Copy all files (including full_dump.img) to your computer and/or SD card !
- NOTE - the next step (bootloader unlock) ** WILL ERASE ALL USERDATA ** so make sure to backup your data before proceeding !
* STEP 4a
Unlock the bootloader with official method and the generated unlock.bin from LG . . .
Reboot the phone into fastboot mode - in cmd.exe type
Code:
adb reboot bootloader
Navigate to unlock.bin and unlock your bootloader !
Code:
fastboot flash unlock unlock.bin
Reboot the phone . . .
Code:
fastboot reboot
* STEP 4b (optional)
Show/confirm the unlocked bootloader state . . .
- NOTE - the unlocked bootloader is indicated by Bootloader state : Bootloader unlocked ! ! in the upper left corner when booting the device !
Reboot the phone into fastboot mode - in cmd.exe type
Code:
adb reboot bootloader
Show current bootloader state !
Code:
fastboot getvar unlocked
> unlocked: yes
Reboot the phone . . .
Code:
fastboot reboot
* STEP 5a
Flash the backup partitions drm, misc and persistent to relock the bootloader !
Copy the partition files drm.img, misc.img and persistent.img from your computer or SD card to the internal storage of the phone !
Repeat * STEP 1 . . .
In cmd.exe navigate to send_command.exe and enter
Code:
send_command.exe \\.\[COLOR="Green"]COM[your port number here][/COLOR]
Again, set the permissions and owner for the files !
Code:
chown -R media_rw:media_rw /data/media/0
chmod -R 0666 /data/media/0
Flash the partitions from the internal storage of the phone . . .
Code:
dd if=/data/media/0/drm.img of=/dev/block/mmcblk0 bs=512 seek=655360 count=16384
dd if=/data/media/0/misc.img of=/dev/block/mmcblk0 bs=512 seek=262144 count=32768
dd if=/data/media/0/persistent.img of=/dev/block/mmcblk0 bs=512 seek=380928 count=4096
Bootloader relock complete ! To finish enter
Code:
LEAVE
Remove the battery and restart the phone . . .
* STEP 5b (optional)
Show/confirm the relocked bootloader state . . .
- NOTE - The indication Bootloader state : Bootloader unlocked ! ! in the upper left corner should no longer appear !
Reboot the phone into fastboot mode - in cmd.exe type
Code:
adb reboot bootloader
Show current bootloader state !
Code:
fastboot getvar unlocked
> unlocked: no
Reboot the phone . . .
Code:
fastboot reboot
---
Personal thanks to @letama for the help, testing and support!
Credits to @OllieD (https://forum.xda-developers.com/g4/general/relocking-bootloader-t3380781) and @xVANKO (https://forum.xda-developers.com/g4/general/h815-relock-bootloader-t3506634) for the development!
What about H818P European version?
Wysłane z mojego LG-H818 przy użyciu Tapatalka
re_di said:
What about H818P European version?
Wysłane z mojego LG-H818 przy użyciu Tapatalka
Click to expand...
Click to collapse
It doesn't matter because we can't unlock
I've unlocked bootloader with old and official method so now I don't have any backup. Can I relock bootloader? Thank you for your excelent work
Drenabrab said:
I've unlocked bootloader with old and official method so now I don't have any backup. Can I relock bootloader? Thank you for your excelent work
Click to expand...
Click to collapse
I got the same problem. I have nor backup of these files if i unlocked it in summer last year. No chance for people like us?
thanks dude, might give this a try, recently got my unlocked device returned from bootloop repair totally locked and going crazy with the stock rom
Thank you for this!
Regarding step 1, is this only for the COM port determination?
If i remember right the com port is also shown in the device manager (windows) when the phone is connected via usb.
Engelm said:
It doesn't matter because we can't unlock
Click to expand...
Click to collapse
This procedure treats about both lock and relock bootloader, so I thought that hopefully may work on 818p Eur version too.
Wysłane z mojego LG-H818 przy użyciu Tapatalka
re_di said:
This procedure treats about both lock and relock bootloader, so I thought that hopefully may work on 818p Eur version too.
Wysłane z mojego LG-H818 przy użyciu Tapatalka
Click to expand...
Click to collapse
It is about unlocking with the official BL unlock (LG-Website).
The only way is to dig into what xVANKO said.
Analyze the partitions before & after, modify them, pray and restore.
If someone would try it I would be happy because we haven't heard anything from him for a long time
and he also has the idea to relock/unlock the devices in exactly this way.
Hello blake_spector,
Thank's for your tutorial ! Look like amazing because i have the G4 since more than one year and get stuck on official ROM is so borring..
But i've a question, i bought my LG G4 in France (i'm french) and it's a H815 but how to see if it can be unlocked/relock ? On imeidata.net there is thoose informations :
Model : LGH815
Suffix: AFRAVK
Chip Type: EG
Network Code: FRA
Thank's a lot
Maaaaaan you're amazing! The man of the year!!! Thank you, and we say all together, f**k lg haahahah
HallEx said:
But i've a question, i bought my LG G4 in France (i'm french) and it's a H815 but how to see if it can be unlocked/relock ?
Click to expand...
Click to collapse
It's ok. Mine is FRA too, I did unlock and relock without any issue.
letama said:
It's ok. Mine is FRA too, I did unlock and relock without any issue.
Click to expand...
Click to collapse
Hello, ohhh yes ! It's a cool news ! After more than one year go to unlock my G4 ! No bootloop but bad battery life hope to get a rom like Samsung S7/Edge with a possibilty to change resolution like 1080P !
Which rom did u install ?
I've already dumped my partitions before unlocking with these commands:
dd if=/dev/block/mmcblk0 bs=8192 skip=585216 count=32768 of=/data/media/0/cust.img
dd if=/dev/block/mmcblk0 bs=8192 skip=16384 count=2048 of=/data/media/0/misc.img
dd if=/dev/block/mmcblk0 bs=8192 skip=40960 count=1024 of=/data/media/0/drm.img
dd if=/dev/block/mmcblk0 bs=8192 skip=43008 count=4096 of=/data/media/0/mpt.img
dd if=/dev/block/mmcblk0 bs=8192 skip=41984 count=1024 of=/data/media/0/sns.img
dd if=/dev/block/mmcblk0 bs=8192 skip=23808 count=256 of=/data/media/0/persistent.img
dd if=/dev/block/mmcblk0 bs=8192 skip=22528 count=192 of=/data/media/0/modemst1.img
dd if=/dev/block/mmcblk0 bs=8192 skip=22720 count=192 of=/data/media/0/modemst2.img
Does they are equivalent?
P.S. I have H815 ITALY LG G4
HallEx said:
Hello, ohhh yes ! It's a cool news ! After more than one year go to unlock my G4 ! No bootloop but bad battery life hope to get a rom like Samsung S7/Edge with a possibilty to change resolution like 1080P !
Which rom did u install ?
Click to expand...
Click to collapse
Maybe little off topic but you could already get down to 1080p even without root just adb commands
Thanks blake I was waiting for this moment since I bought my G4 tomorrow I'll do all the things and report back
Is send command compatible with USB 3.0?(I had some bluescreens during unlocks on my HTC phones) Can someone post a command for dumping data partition(one that stores all my things, apps etc)
Guys should I wait for nougat because of bootloader etc update or should i unlock now?
The main problem is that maybe they fix this gap...
Hi !
Thank you very much for this guide, I'm waiting for this since I upgraded to stock MM, which has caused me to lose root on my G4
However I couldn't do the step 3 because I don't find the partition images created during step 2.
Where are they supposed to be found ?
In the root of the internal memory, when I plug the phone in my computer or via en explorer app like Solid Explorer ?
My guess is the dd commands that create the partition files failed and the images were not created.
The first time I used the command to create drm.img, it seems that it takes forever (20~30mn+) so I'm forced to Ctrl + C.
When I execute the command again, I get the # prompt in like 2 seconds. The following dd commands last 2 seconds also.
But when I reboot the phone, I don't see any img files on my internal memory.
I tried to redo the Step 2 after rebooting, but the commands still lasts 2 seconds.
What did I miss ?
How long the dd commands are supposed to take ?
Is there some sort of requirements to succeed ?
I have of course a H815, 20i image flashed by OTA, I never messed with the bootloader, have 11 GB of free memory on Internal Memory.
My internal memory is also encrypted.
Thank you very much
Mess35 said:
Hi !
Thank you very much for this guide, I'm waiting for this since I upgraded to stock MM, which has caused me to lose root on my G4
However I couldn't do the step 3 because I don't find the partition images created during step 2.
Where are they supposed to be found ?
In the root of the internal memory, when I plug the phone in my computer or via en explorer app like Solid Explorer ?
My guess is the dd commands that create the partition files failed and the images were not created.
The first time I used the command to create drm.img, it seems that it takes forever (20~30mn+) so I'm forced to Ctrl + C.
When I execute the command again, I get the # prompt in like 2 seconds. The following dd commands last 2 seconds also.
But when I reboot the phone, I don't see any img files on my internal memory.
I tried to redo the Step 2 after rebooting, but the commands still lasts 2 seconds.
What did I miss ?
How long the dd commands are supposed to take ?
Is there some sort of requirements to succeed ?
I have of course a H815, 20i image flashed by OTA, I never messed with the bootloader, have 11 GB of free memory on Internal Memory.
My internal memory is also encrypted.
Thank you very much
Click to expand...
Click to collapse
Hello,
I have the same problem, i'm stuck on the 2nd step since 2 hours.
After LGUP restart to "COM4" i disconnect the phone and try to dump partitions but nothing special. Every command his finish in 1sec. The phone reboot when i'm at the "LEAVE" command and restart on a new install of my firmware ! Lost all my app (but already get a backup before)
I don't find any backup in the files manager, there is nothing.
For the moment i'm like you, at the same step... Hope to find a way to resolve the problem
yener90 said:
Guys should I wait for nougat because of bootloader etc update or should i unlock now?
The main problem is that maybe they fix this gap...
Click to expand...
Click to collapse
No reason to wait. If you will like to relock, just get back on MM(not sure if LG will change the partitions on nougat so for now better to get back) and if you wish, upgrade to nougat again
Mess35 said:
Hi !
Thank you very much for this guide, I'm waiting for this since I upgraded to stock MM, which has caused me to lose root on my G4
However I couldn't do the step 3 because I don't find the partition images created during step 2.
Where are they supposed to be found ?
In the root of the internal memory, when I plug the phone in my computer or via en explorer app like Solid Explorer ?
My guess is the dd commands that create the partition files failed and the images were not created.
The first time I used the command to create drm.img, it seems that it takes forever (20~30mn+) so I'm forced to Ctrl + C.
When I execute the command again, I get the # prompt in like 2 seconds. The following dd commands last 2 seconds also.
But when I reboot the phone, I don't see any img files on my internal memory.
I tried to redo the Step 2 after rebooting, but the commands still lasts 2 seconds.
What did I miss ?
How long the dd commands are supposed to take ?
Is there some sort of requirements to succeed ?
I have of course a H815, 20i image flashed by OTA, I never messed with the bootloader, have 11 GB of free memory on Internal Memory.
My internal memory is also encrypted.
Thank you very much
Click to expand...
Click to collapse
HallEx said:
Hello,
I have the same problem, i'm stuck on the 2nd step since 2 hours.
After LGUP restart to "COM4" i disconnect the phone and try to dump partitions but nothing special. Every command his finish in 1sec. The phone reboot when i'm at the "LEAVE" command and restart on a new install of my firmware ! Lost all my app (but already get a backup before)
I don't find any backup in the files manager, there is nothing.
For the moment i'm like you, at the same step... Hope to find a way to resolve the problem
Click to expand...
Click to collapse
I added a picture of 3rd step, the partition images should be in the root of the internal storage and accessible with the stock LG file manager.
I'm not sure what you might have missed, as I composed the guide from a continuous screengrab and video record of me doing the process.
The dd commands for drm, misc, persistent shouldn't take longer than 1sec (as they are only 8, 16 and 2 MB), the dd command for full_dump (~6 GB) might take a few minutes.
My internal memory is also encrypted.
Click to expand...
Click to collapse
That could be a problem, in my example the internal storage is/was not encrypted!
You could try to use LGUP and refurbish (!) to a fresh starting point (I used this KDZ https://forum.xda-developers.com/g4/general/kdz-firmware-v20j-united-kingdom-2016-t3518925) before doing the process.
OFC backup all your data first, as this will perform a complete reset of the device.
Hi
I downgrade my Galaxy A5 2015 (SM A500FU) to 4.0.4 from 6.01, and now is hard bricked
Does not power on, can't enter to download mode, totally dead.
And now, I need a little help, I require some files from a working device (this is not unique files) but require to boot up the device.
I need a debrick image (First I try to unbrick with sdcard, and if this not working, I open the device and direct flash the emmc)
Requirements:
* rooted device
* 6.* firmware
* adb or terminal emulator
What I need?
Execute this command with adb, or terminal emulator, and upload the image to any filesharing site, or google drive, and send the link to me in private message.
dd if=/dev/block/mmcblk0 of=/sdcard/debrick.img bs=1M count=200
If I found a solution, how to unbrick this device in home, I share in this forum.
Thanks!
stars2 said:
Hi
I downgrade my Galaxy A5 2015 (SM A500FU) to 4.0.4 from 6.01, and now is hard bricked
Does not power on, can't enter to download mode, totally dead.
And now, I need a little help, I require some files from a working device (this is not unique files) but require to boot up the device.
I need a debrick image (First I try to unbrick with sdcard, and if this not working, I open the device and direct flash the emmc)
Requirements:
* rooted device
* 6.* firmware
* adb or terminal emulator
What I need?
Execute this command with adb, or terminal emulator, and upload the image to any filesharing site, or google drive, and send the link to me in private message.
dd if=/dev/block/mmcblk0 of=/sdcard/debrick.img bs=1M count=200
If I found a solution, how to unbrick this device in home, I share in this forum.
Thanks!
Click to expand...
Click to collapse
Did you manage to boot the unbrick image from SD card? I have the same problem, but as cannot communicate with the phone with adb, the card option seems to be the last one before sending the phone for some one with JTAG.
Perceive said:
Having the same problem and have access to a working phone
Click to expand...
Click to collapse