Sir, when I flashed or installed custom rom resurrection remix 6.0 (land) latest version that is oreo based, my redmi 3s prime volte is not working.. I am not understanding why volte is not working? Please sir give me solution or fix this problem. Volte is my priority..
Use sim1 slot
sanjeev_kannan said:
Use sim1 slot
Click to expand...
Click to collapse
I have already checked in sim slot one and also sim slot second too.. But my redmi 3s prime volte is not working sir.. Please give me any other solution. Thank you..
Adesh Mishra said:
I have already checked in sim slot one and also sim slot second too.. But my redmi 3s prime volte is not working sir.. Please give me any other solution. Thank you..
Click to expand...
Click to collapse
Brother first of all flash official MIUI9 globle stable rom on your Redmi 3S prime device.
After that set up mui 9 Rom (welcome screan).
After that go to twrp recovery & vipe all dalvik, data, system, caches,
After that flash your RR or any other rom your volte will work 100 %.
. Note :use sim slot one for volte.
I am sure because I was face same problem 2 days before & i am fix this issue with that trick.
MAH35H said:
Brother first of all flash official MIUI9 globle stable rom on your Redmi 3S prime device.
After that set up mui 9 Rom (welcome screan).
After that go to twrp recovery & vipe all dalvik, data, system, caches,
After that flash your RR or any other rom your volte will work 100 %.
. Note :use sim slot one for volte.
I am sure because I was face same problem 2 days before & i am fix this issue with that trick.
Click to expand...
Click to collapse
Thanks.. If you don't mind, please give me instruction step by step to follow this.. I have doubt I think you will give me step by step process of miui rom and then rr rom installation then I will be easy to do this process.. Please sir.. And thanks a lot for give me this solution.
Adesh Mishra said:
Thanks.. If you don't mind, please give me instruction step by step to follow this.. I have doubt I think you will give me step by step process of miui rom and then rr rom installation then I will be easy to do this process.. Please sir.. And thanks a lot for give me this solution.
Click to expand...
Click to collapse
Ok install miui 9 first.
1. Download Miui 9 globle stable rom from the link - http://bigota.d.miui.com/V9.2.2.0.MALMIEK/miui_HM3SGlobal_V9.2.2.0.MALMIEK_e6ac0c428e_6.0.zip
2. Download Lazyflasher Zip file allso - https://androidfilehost.com/?fid=457095661767148342
3. Save both the files in your internal storage or sd card.
4. Boot your phone into TWRP Recovery mode. Go to vipe section /advance vipe /Dalvik +data +system +caches vipe it.
5. Now go to install section. Select Miui 9 file, Flash it. Don't reboot. Again go to install section then select Lazyflasher zip file, Flash it. Now click on reboot system. It will take 5-10 minuts to boot up so wait.
6. After that set up your phone fast. (That is important step). Set up your phone.
7. After that download RR or any other rom which you want to use.
Download RR 6.0 - https://sourceforge.net/projects/resurrectionremix-oreo/files/land/
Download Gapps 8.1 arm64 - http://opengapps.org
8. Save it on your internal storage or sd card.
9. Boot your phone again in to a TWRP recovery mode. Again go to vipe section /advance vipe /Dalvik +system+data +caches vipe it.
10. Now go to install section select RR 6.0 ZIP file, flash it.
11. Again go to install section select Gapps file, Flash it. Now click on reboot system. It will take 5-10 minutes to boot up. Now your volte will fix try it.
12. Note that use sim slot 1 for volte network.
MAH35H said:
Ok install miui 9 first.
1. Download Miui 9 globle stable rom from the link - http://bigota.d.miui.com/V9.2.2.0.MALMIEK/miui_HM3SGlobal_V9.2.2.0.MALMIEK_e6ac0c428e_6.0.zip
2. Download Lazyflasher Zip file allso - https://androidfilehost.com/?fid=457095661767148342
3. Save both the files in your internal storage or sd card.
4. Boot your phone into TWRP Recovery mode. Go to vipe section /advance vipe /Dalvik +data +system +caches vipe it.
5. Now go to install section. Select Miui 9 file, Flash it. Don't reboot. Again go to install section then select Lazyflasher zip file, Flash it. Now click on reboot system. It will take 5-10 minuts to boot up so wait.
6. After that set up your phone fast. (That is important step). Set up your phone.
7. After that download RR or any other rom which you want to use.
Download RR 6.0 - https://sourceforge.net/projects/resurrectionremix-oreo/files/land/
Download Gapps 8.1 arm64 - http://opengapps.org
8. Save it on your internal storage or sd card.
9. Boot your phone again in to a TWRP recovery mode. Again go to vipe section /advance vipe /Dalvik +system+data +caches vipe it.
10. Now go to install section select RR 6.0 ZIP file, flash it.
11. Again go to install section select Gapps file, Flash it. Now click on reboot system. It will take 5-10 minutes to boot up. Now your volte will fix try it.
12. Note that use sim slot 1 for volte network.
Click to expand...
Click to collapse
Thanks a lot for giving me your important time sir..
Sir.. After RR rom flashed, I will have again wipe dalvik/cache or not?
Thanks a lot sir..
Adesh Mishra said:
Thanks a lot for giving me your important time sir..
Sir.. After RR rom flashed, I will have again wipe dalvik/cache or not?
Thanks a lot sir..
Click to expand...
Click to collapse
Yes no problem but don't vipe data, system.
MAH35H said:
Yes no problem but don't vipe data, system.
Click to expand...
Click to collapse
Thanks a lot sir..
Adesh Mishra said:
Thanks a lot sir..
Click to expand...
Click to collapse
Sir.. I have only one question.. Sir I heard that If camera2api(manual camera) enables in mobile, mobile volte will not work after enable it. Sir, this fact is true or not?
Please confirm it?
Sir.... I followed all instruction and done it.. but also now redmi 3s prime volte is not working.. in miui 9, volte is working perfectly but volte is not working in reservation remix rom yet that is based on oreo..
Adesh Mishra said:
Sir.... I followed all instruction and done it.. but also now redmi 3s prime volte is not working.. in miui 9, volte is working perfectly but volte is not working in reservation remix rom yet that is based on oreo..
Click to expand...
Click to collapse
may be the issues is with that particular rom try another rom and see if it fixed. cr droid and aex both are fantastic roms. you should check those
Adesh Mishra said:
Sir.. I have only one question.. Sir I heard that If camera2api(manual camera) enables in mobile, mobile volte will not work after enable it. Sir, this fact is true or not?
Please confirm it?
Click to expand...
Click to collapse
Go to settings /Network & Internet/Mobile network/Advanced/Access Point Names/
Delete all APNs.
After that Create new APN, for that click on + icon on the top right corner.
APN settings:
Name : Jio4G
APN : jionet
APN type : default
APN protocol : IPv4/IPv6
APN roaming protocol: IPv4/IPv6
Now click on 3 dot options on top right. Now click on save.
Now select this settings.
Now again go to settings /Network & Internet/Mobile network/ Enable Roaming.
Again go to settings /Network & Internet/Mobile network/Advanced/Preferred network type/select LTE.
Reboot your phone. Done try this method.
Sir.. Can I use Gapps 64 nano 8.1 for rr rom? Is this necessary that Gapps should be stock variant not nano variant?
Thanks for helping me a lot..
Vinayakn73 said:
may be the issues is with that particular rom try another rom and see if it fixed. cr droid and aex both are fantastic roms. you should check those
Click to expand...
Click to collapse
Brother.. Have you link for this particular rom? Is this rom stable and volte works it or not?
Please give me link.. thanks
MAH35H said:
Go to settings /Network & Internet/Mobile network/Advanced/Access Point Names/
Delete all APNs.
After that Create new APN, for that click on + icon on the top right corner.
APN settings:
Name : Jio4G
APN : jionet
APN type : default
APN protocol : IPv4/IPv6
APN roaming protocol: IPv4/IPv6
Now click on 3 dot options on top right. Now click on save.
Now select this settings.
Now again go to settings /Network & Internet/Mobile network/ Enable Roaming.
Again go to settings /Network & Internet/Mobile network/Advanced/Preferred network type/select LTE.
Reboot your phone. Done try this method.
Click to expand...
Click to collapse
Sir.. I had not enabled roaming.. I think this is issue of it.. RR latest rom supports voLTE or old version supports?
Sir.. Can I use Gapps 64 nano 8.1 for rr rom? Is this necessary that Gapps should be stock variant not nano variant?
Thanks for helping me a lot..
Adesh Mishra said:
Brother.. Have you link for this particular rom? Is this rom stable and volte works it or not?
Please give me link.. thanks
Click to expand...
Click to collapse
yup I tried both of these roms and are pretty much stable with good battery backup. I didn't check volte though.
Vinayakn73 said:
yup I tried both of these roms and are pretty much stable with good battery backup. I didn't check volte though.
Click to expand...
Click to collapse
Thanks for your suggestion brother..
Yes RR 6.0 new build supports volte perfectly on my phone.
MAH35H said:
Yes RR 6.0 new build supports volte perfectly on my phone.
Click to expand...
Click to collapse
OK sir.. I can use GApps 64 nano?
Related
Hello Everyone
Since DEVDB is not accepting "Redmi Note 3" I am starting this thread to share all the best ROM's, Tweaks & tricks for the Helios-X10 based Hennessy
All link's & uploads will be posted in this OP once the thread is approved.
0) XIAOMI.EU 7.2.3.0 ROM (Stable & Developer) (no China apps, Rooted, Xposed, Gapps) - THIS IS THE BEST!
1) China ROM - Official (Stable & Developer) UPDATE mode (full of China apps, no Root, no Gapps)
2) China ROM - Official (Stable & Developer) - MIUI 7.1.8.0, SP Flash tools mode (full of China apps, no Root, no Gapps)
3) Global ROM - SphinX v2b ManhIT (MIUI 7.1.3.0 Stable with SwiftKey, SuperSU, GApps & no China apps)
4) Global ROM - by LoXar (MIUI 7.1.6.0 Stable with Super SU2.66, GApps, & no China apps)
5) sMIUI ROM Kitchen (needs custom Recovery - by Handam000)
6) sCM12.1 Unofficial for RN3
Hacks & Tweaks
1) Fingerprint Sensor fix by Shade5
2) Un-brick your Redmi Note 3 if SPFlashTools failed
3) Restore/Change IMEI number
Coming up...
Tweaking 2G/3G/4G band settings , Battery Tweaks , Rooting, SuperSU, GApps ,Unlocking Bootloader
Enjoy!
Shade5
This will activate the hardware of your Fingerprint sensor if you've flashed the SphinXv2b Stable_Redmi_Note3_MIUI7.1.3.0_Global_ManhIT ROM and found the Fingerprint sensor not working...
All steps are same as you did for flashing the ROM (screenshot & instructions are also in the zip folder)
First download my Fix attached here & unzip it on your desktop
1) Use SP_Flash_Tool_v5.1516.00 (not included - use the same one which you flashed your ROM with)
2) select Download Agent (DA_SWSEC.BIN) in the FLASH TOOL folder
3) find Scatter file (MT6795_Android_scatter.txt) in the IMAGES folder
However
4) Only untick SYSTEM & USERDATA ,keep the rest selected
Now flash away as normal & reboot once done....
This fix will not affect your apps/data & will immediately ask you to enter your fingerprint - only this time... IT WORKS :good:
IF for any reason you managed to "brick" your phone, just flash the stock China ROM again from the OP or follow the un-brick link for more instructions
Enjoy!
Shade5
Reserved 2
Reserved 3
Hi,
I've just tried the fingerprint solution but unfortunately it still dosn't work. What does your fix actually do? Is there anything else I can try?
Thanks
zms786 said:
Hi,
I've just tried the fingerprint solution but unfortunately it still dosn't work. What does your fix actually do? Is there anything else I can try?
Thanks
Click to expand...
Click to collapse
Hi ZMS...
Firstly just to be sure - did you SPTools flash the SphinX v2b ROM?
After that if you flash my files exactly as per the screenshot I have put in the folder, the Fingerprint sensor driver's get installed.
(BTW on my 16gb the SphinX v2b works but it didn't work on the 32GB, so I made this fix.zip)
I found this ROM was the cleanest n best hence I made this fix (rather than flashing the Chinese or LoXar rom)
Let me know how it goes for you
Hi
I followed your instructions as described and flashed with spflash tool. I will try again and also tried to reboot it but that didn't work. Is there anything else I can check?
That's strange!
Mine (3G/32G) came with SphinX V1 installed and I moved to V2b without any issue.
.I then flashed LoXar 7.1.6.0 on it with SPflashtool (following MIUI EU trend) and live with it now.
No big sensible difference between the two versions, and finger print is working best from the beginning .
Why not to try Loxar and check if issue is solved and in case it will still be present to clean the phone with a China dev version and reapply SphinX as ultimate check.
Edit:
Thanks again to you @ Shade5 for opening this thread
My rn3 bricked
Shade5 said:
This will activate the hardware of your Fingerprint sensor if you've flashed the SphinXv2b Stable_Redmi_Note3_MIUI7.1.3.0_Global_ManhIT ROM and found the Fingerprint sensor not working...
All steps are same as you did for flashing the ROM (screenshot & instructions are also in the zip folder)
First download my Fix attached here & unzip it on your desktop
1) Use SP_Flash_Tool_v5.1516.00 (not included - use the same one which you flashed your ROM with)
2) select Download Agent (DA_SWSEC.BIN) in the FLASH TOOL folder
3) find Scatter file (MT6795_Android_scatter.txt) in the IMAGES folder
However
4) Only untick SYSTEM & USERDATA ,keep the rest selected
Now flash away as normal & reboot once done....
This fix will not affect your apps/data & will immediately ask you to enter your fingerprint - only this time... IT WORKS :good:
Enjoy!
Shade5
Click to expand...
Click to collapse
i follow this just after i flashed v2b, now my RN3 wont even start, i tried to flash it again with v2b, but the sp tool keeps showing error
PLEASE HELP!!!!!!!!!!!
Shade5 said:
However
4) Only untick SYSTEM & USERDATA ,keep the rest selected
Now flash away as normal & reboot once done....
Shade5
Click to expand...
Click to collapse
It's important to untick "preloader" too ! When you don't do that, there's a risk, that your device bricks. You always have to do that when you flash non-stock things with SP-Flashtool.
Btw. What's with custom roms for the Redmi Note 3 ? They should be in your first post too...
Is the xposed useful if I install
Sent from my Redmi Note 3 using Tapatalk
if only you said that earlier
Cameo164 said:
It's important to untick "preloader" too ! When you don't do that, there's a risk, that your device bricks. You always have to do that when you flash non-stock things with SP-Flashtool.
Click to expand...
Click to collapse
man, if only you said that earlier... my RN3 now bricked, it wont turn on,.. can you give me a solution ? please..:crying:
can any body please post another link for : 4) Global ROM - by LoXar (MIUI 7.1.6.0 Stable with Super SU2.66, GApps, & no China apps)
?
Thank you.
Davidfi1 said:
can any body please post another link for : 4) Global ROM - by LoXar (MIUI 7.1.6.0 Stable with Super SU2.66, GApps, & no China apps)
?
Thank you.
Click to expand...
Click to collapse
Here you have. But what's so bad with registering at the MIUI forum so that you can download it from there?
https://mega.nz/#!jNYylDBJ!ZSmwZALOiucQgQTidEqIrjSnIXtWCu14KpTNf2wjVSY
---------- Post added at 20:14 ---------- Previous post was at 19:30 ----------
isfanl said:
man, if only you said that earlier... my RN3 now bricked, it wont turn on,.. can you give me a solution ? please..:crying:
Click to expand...
Click to collapse
Try to reflash SphinX Rom ( http://en.miui.com/thread-207019-1-1.html ) and pay attention that you untick "preloader". Good Luck. :fingers-crossed:
And when this isn't working, try this method: Use SP Tool V5.1516 for flashing the rom (Untick preloader!!). Instead holding only the Vol Down button, Hold Both Vol Down + Power button when plugging the usb cable in. The progress bar should turn yellow and the flash should be completed. Turn on the device, it will take some time, but it should work.
Cameo164 said:
Here you have. But what's so bad with registering at the MIUI forum so that you can download it from there?
https://mega.nz/#!jNYylDBJ!ZSmwZALOiucQgQTidEqIrjSnIXtWCu14KpTNf2wjVSY
Click to expand...
Click to collapse
I did register at the MIUI forum - the problem is with the mega link is not working here for some reason ....
Thank you.:good:
David.
Does anyone have RN3 like me on that picture..
elol said:
Does anyone have RN3 like me on that picture..
Click to expand...
Click to collapse
I have the 3GB RAM version but I had that MIUI version on my device when I bought it too. It's an unofficial shop version. I would switch to an official MIUI version because your version doesn't get updated. I can recommend the latest developer version 6.1.29.
Cameo164 said:
I have the 3GB RAM version but I had that MIUI version on my device when I bought it too. It's an unofficial shop version. I would switch to an official MIUI version because your version doesn't get updated. I can recommend the latest developer version 6.1.29.
Click to expand...
Click to collapse
How can I flash it?its only use update.zip on sd card or need to use pc or laptop..sory for noob question
zms786 said:
Hi
I followed your instructions as described and flashed with spflash tool. I will try again and also tried to reboot it but that didn't work. Is there anything else I can check?
Click to expand...
Click to collapse
I'd need some info before I can help you out....
1) Is your phone 16 or 32 GB?
2) What was the initial ROM version on it
3) Did you flash the CHINA stable ROM before the SphinX v2b?
lolo9393 said:
That's strange!
Mine (3G/32G) came with SphinX V1 installed and I moved to V2b without any issue.
.I then flashed LoXar 7.1.6.0 on it with SPflashtool (following MIUI EU trend) and live with it now.
No big sensible difference between the two versions, and finger print is working best from the beginning .
Why not to try Loxar and check if issue is solved and in case it will still be present to clean the phone with a China dev version and reapply SphinX as ultimate check.
Edit:
Thanks again to you @ Shade5 for opening this thread
Click to expand...
Click to collapse
Hi @lolo9393 , glad the thread is catching on
Some Redmi's are "pre-flashed" with shop-rom's that have Play store
These versions dont register the fingerprint driver's once flashed
I have both 16GB (China, Stable stock, no Play store) & 32GB(Singapore, stable ROM with Play store) RN3's
My fix only re-flashes these (which you didn't as your stock driver's were still working)
This Guide is for all Kenzo users getting issue in VoLTE not working in Android 7.*.* . Kindly don't spam Development thread.
Steps for getting VoLTE
* - Flash MIUI Global Beta 6.11.3 Fastboot using MiFlash.
* - Setup your phone and VoLTE on MIUI will work out of box. Keep using until you get VoLTE on MIUI
*- Once you get VoLTE in MIUI, unlock bootloader using MiFlashUnlock.
* - Flash TWRP Recovery.
* - Go to backup and backup your efs partition.
* - Wipe dalvik, cache, data, system.
* - Flash CM14-firmware-20161115.zip + ResurrectionRemix-N-v5.8.0-20161201-kenzo.zip + gapps(ur choice).
* - Boot your rom and complete setup.
* - Boot to recovery and restore efs backup.
* - Boot to system and you'll get HD icon.
Once you get HD logo. Now flash any VoLTE enabled rom.
Links:
MIUI 6.11.3 - MIUI 6.11.3
MIUI 6.11.3 From official servers - MIUI 6.11.3 From official servers
TWRP - TWRP for Kenzo
CM14 Firmware by abhishek987 - CM14-firmware-20161115
RR v5.8.0-20161201 by abhishek987 - ResurrectionRemix-N-v5.8.0-20161201-kenzo
Gapps - Opengapps
Thanks abhishek987 for developing roms for Kenzo.
1). I didnt get what u said at the end
"Once u get HD icon, flash any volte enabled rom"
What u mean by that??
U already flashed RRrom
Why u need to flash any other rom??
2). Btw will it gonna be okay if i chose 6.12.22 global dev rom instead of what u mentioned??
Sree2k said:
1). I didnt get what u said at the end
"Once u get HD icon, flash any volte enabled rom"
What u mean by that??
U already flashed RRrom
Why u need to flash any other rom??
2). Btw will it gonna be okay if i chose 6.12.22 global dev rom instead of what u mentioned??
Click to expand...
Click to collapse
1. You can install any ROM you want after this..It should have the HD icon automatically if you downloaded the ROM that has VoLTE Support built in. Else follow the Sudeep Duhoon thread
2. If you flash it via Fastboot, only then....
Sree2k said:
1). I didnt get what u said at the end
"Once u get HD icon, flash any volte enabled rom"
What u mean by that??
U already flashed RRrom
Why u need to flash any other rom??
2). Btw will it gonna be okay if i chose 6.12.22 global dev rom instead of what u mentioned??
Click to expand...
Click to collapse
1) If you follow all these steps you'll get VoLTE working with any rom you flash afterwards. You are free to use any rom everyone has different taste. This guide just prepares device for HD.
2) I have flashed many fastboot images and finally got working volte with MIUI 6.11.3. So, as per experience i can say. 6.12.22 not gonna help. Don't know why MIUI firmware after MIUI 6.11.3 failing to get VoLTE with custom roms.
dout
is we have use any vlt supported rom instead of ResurrectionRemix-N-v5.8.0-20161201-kenzo.zip
because i cant find ResurrectionRemix-N-v5.8.0-20161201-kenzo.zip in xda bt abhisek
could yuo clarify
or pls provide the link correctly
jitkr said:
This Guide is for all Kenzo users getting issue in VoLTE not working in Android 7.*.* . Kindly don't spam Development thread.
Steps for getting VoLTE
* - Flash MIUI Global Beta 6.11.3 Fastboot using MiFlash.
* - Setup your phone and VoLTE on MIUI will work out of box. Keep using until you get VoLTE on MIUI
*- Once you get VoLTE in MIUI, unlock bootloader using MiFlashUnlock.
* - Flash TWRP Recovery.
* - Go to backup and backup your efs partition.
* - Wipe dalvik, cache, data, system.
* - Flash CM14-firmware-20161115.zip + ResurrectionRemix-N-v5.8.0-20161201-kenzo.zip + gapps(ur choice).
* - Boot your rom and complete setup.
* - Boot to recovery and restore efs backup.
* - Boot to system and you'll get HD icon.
Once you get HD logo. Now flash any VoLTE enabled rom.
Links:
MIUI 6.11.3 - MIUI 6.11.3
MIUI 6.11.3 From official servers - MIUI 6.11.3 From official servers
TWRP - TWRP for Kenzo
CM14 Firmware by abhishek987 - CM14-firmware-20161115
RR v5.8.0-20161201 by abhishek987 - ResurrectionRemix-N-v5.8.0-20161201-kenzo
Gapps - Opengapps
Thanks abhishek987 for developing roms for Kenzo.
Click to expand...
Click to collapse
Resurrection remix 20161201 rom link is broken
jitkr said:
1) If you follow all these steps you'll get VoLTE working with any rom you flash afterwards. You are free to use any rom everyone has different taste. This guide just prepares device for HD.
2) I have flashed many fastboot images and finally got working volte with MIUI 6.11.3. So, as per experience i can say. 6.12.22 not gonna help. Don't know why MIUI firmware after MIUI 6.11.3 failing to get VoLTE with custom roms.
Click to expand...
Click to collapse
Checking....
kumar.gaurav85 said:
Resurrection remix 20161201 rom link is broken
Click to expand...
Click to collapse
Link Updated :good:
rohithvr6 said:
is we have use any vlt supported rom instead of ResurrectionRemix-N-v5.8.0-20161201-kenzo.zip
because i cant find ResurrectionRemix-N-v5.8.0-20161201-kenzo.zip in xda bt abhisek
could yuo clarify
or pls provide the link correctly
Click to expand...
Click to collapse
Link for RR 20161201 Updated :good:. It worked thats why i mentioned RR Specific build. As specified build contains firmware that newer builds doesn't have. Main reason for broken VoLTE.
i did all yours steps
still didnt get HD icon or volte at the end
is it because of specific build of ressurection remix rom???
i downloaded RR-N-v5.8.0-20161225-kenzo-Nightly.zip
or should i check again with the build u specified?
Update: I downloaded the RR rom link you provided
VoLTE WORKING!!!!!!!!!!
Thanx bro??
tanks
so i get volte as per procedure...so i want flash othe rrom called tesla n which supported volte..... so wat i do, can u help me
---------- Post added at 10:28 AM ---------- Previous post was at 10:25 AM ----------
jitkr said:
Link for RR 20161201 Updated :good:. It worked thats why i mentioned RR Specific build. As specified build contains firmware that newer builds doesn't have. Main reason for broken VoLTE.
Click to expand...
Click to collapse
so am asking wat do for another roms for getting volte pls tell the procedure
My Jio sim working only in sim 2, So if i will follow these steps, Will Volte work for sim 2????
rohithvr6 said:
so i get volte as per procedure...so i want flash othe rrom called tesla n which supported volte..... so wat i do, can u help me
---------- Post added at 10:28 AM ---------- Previous post was at 10:25 AM ----------
so am asking wat do for another roms for getting volte pls tell the procedure
Click to expand...
Click to collapse
* - Don't Flash any firmware from now until asked by developer.
* - Format System+Data+ART+Cache.
* - Flash your desired Rom + gapps + [ - Flash modified package( i.e. modified framework-res.apk) volte zip provided by developer.]
* - Reboot to system and after setup you'll get HD Logo. If HD not appear then restore EFS backup.
Enjoy :good:
---Modified framework-res.apk is just for providing a toggle [-Enhance 4G LTE Mode-] option under sim settings
skahmed936 said:
My Jio sim working only in sim 2, So if i will follow these steps, Will Volte work for sim 2????
Click to expand...
Click to collapse
Guide provided is just for making system able to support VoLTE.
There are different hacks for this. One i know is to dial *#*#4636#*#* and under sim2 setting toggle on VoLTE and Video calls. May be this will work. But before trying this be sure that VoLTE works with your present ROM.
got the HD icon even without restoring efs ..though u have to use same files for flashing as mentioned above ..thanks
shashankj150 said:
got the HD icon even without restoring efs ..though u have to use same files for flashing as mentioned above ..thanks
Click to expand...
Click to collapse
VoLTE having no issue if flashing done properly as i provided . Still members flooding VoLTE messages in development thread. Kindly help others or forward them this thread link so that developers don't get irritated.
Thanks :good:
Is it OK if I flash recovery ROM of 6.11.3 ? Bcuz fastboot rom cleans internal storage.
Aditya1011 said:
Is it OK if I flash recovery ROM of 6.11.3 ? Bcuz fastboot rom cleans internal storage.
Click to expand...
Click to collapse
You are good to go with recovery also.
Sent from my Redmi Note 3 using XDA-Developers mobile app
followed the procedure but still not volte. what to do.
I flashed miui rom that you provided, got volte. backup efs, then flash firmware+rr and then reboot. no volte
went to recovery again and restored efs, still no volte.
Facing similar sort of issue like @Archit9169, followed all the procedures properly but no VoLTE yet
Plz help !
FlymeOS Rom for Redmi Note3 pro (SD)(kenzo + kate)V6_7.10.20R-beta from by haohao3344 Android 6.0
What's working :
Boots
Camera
RIL
Wifi
Bluetooth
Video Playback
GPS
Audio ( Record and Playback )
Camera ( Videos )
Sensors
FingerPrint
Leds
Volte 4G
What's not working:
missed calls and incoming messages does not arrive
at the number of application notifications
Please feedback to [email protected], [email protected], [email protected]
Loading instructions:
1- Firstly, the device must be rooted and TWRP installed.
2- Download the FlymeOS Rom.zip version + SuperSU.zip, gapps + Titanium Backup Pro-v8.0.2.apk files you want to load from the links and copy them to the external SD card.
IMPORTANT NOTE: Kate will copy the extra miui_HMNote3ProtwGlobal_7.10.19_Firmware baseband file to the external SD card for a smooth operation.
3. Back up your Rom external SD card.
4 - TWRP den 4 lü wipe called Dalvik Cache + Cache + Data + System. (Internal SD not marked)
5- At TWRP, go back to Install and flash the FlymeOS Rom.zip version + Gapps file.
7. When Kate devices are in TWRP for the baseband, go back to Install and flash the extra miui_HMNote3ProtwGlobal_7.10.19_Firmware file.
The device is Root but still prefer to flash SuperSU.zip. When the process is finished, click the bottom left wipe cache and Reboot.
Boot 20 to 30 minutes do not rush speed. (For contacts, make your Gmail synced)
Flyme_Redmi-Note-3_haohao3344_6.7.10.20R-beta
Download link: http://www.dosya.tc/server10/klmagp/e_Redmi-Note-3_haohao3344_6.7.10.20R-beta.zip.html
Published: 10/26/2017. TWRP will not corrupt File fixlidir.
SuperSu link: http://s5.dosya.tc/server5/3mtidz/SuperSU-v2.82-201705271822.zip.html
Gapps link: arm64-6.0-pico: http://s5.dosya.tc/server5/jdjry6/open_gapps-arm64-6.0-pico-20171103.zip.html
Extra for Kate devices: miui_HMNote3ProtwGlobal_7.10.19_Firmware
(Do not install kenzo devices!)
http://s4.dosya.tc/server5/ebc51s/miui_HMNote3ProtwGlobal_7.10.19_Firmware.zip.html
After installing the device, install Titanium_Backup_Pro-v8.0.2.apk and uninstall unwanted Chinese applications.
https://play.google.com/store/apps/details?id=com.keramidas.TitaniumBackup
There is no Turkish on the keyboard, instead, the Xperia ™ keyboard with Ethnic master's tempo replaced. Install the keyboard and choose Xperia from the language and clock application.
https://forum.miuiturkiye.net/dosyalar/xperia-klavye-apk.10682/
You can also use fingerprints if you introduce fingerprints to use lockups
Why try FlymeOS:
Flyme OS V6 also uses "One Mind"!
China-based smartphone maker Meizu announced that it will use open source Android-based Flyme OS 6 as its operating system. The operating system integrated with "artificial intelligence" "One Mind" has a different interface than all other Android operating system phones. Both the desktop and the backplane have serious differences and Flyme os 6 aims to come to a special place, taking advantage of the flexibility of Android.
I am using this romance for now and
*** We will wait for the Rom a work with "artificial intelligence" support at XIAOMI ***
Orginal porting links: http://www.flyme.cn/firmwarelist-51.html#7
Rom users [kaizenTR] test Fan page: https://forum.miuiturkiye.net/konu/...3344-for-redmi-note3-pro-sd-kenzo-kate.18020/
See the following link for user [kaizenTR] screenshots: https://forum.miuiturkiye.net/konu/...3344-for-redmi-note3-pro-sd-kenzo-kate.18020/
Sorry my not good at English
No offence but do u have permission to share rom by Original Dev
Volte working
MIHIR465 said:
Volte working
Click to expand...
Click to collapse
yes if u want to confirm just go to the official thread which was made by haohao
Criston said:
No offence but do u have permission to share rom by Original Dev
Click to expand...
Click to collapse
I have not seen any ban on the published sites
because earlier versions have already been released for kenzo
Criston said:
yes if u want to confirm just go to the official thread which was made by haohao
Click to expand...
Click to collapse
Ok thanx
My volte doesn't work i have kenzo so tell me which firmware i should flash
hajik2029 said:
My volte doesn't work i have kenzo so tell me which firmware i should flash
Click to expand...
Click to collapse
follow this link: [Firmware] Redmi Note 3 Pro [Kenzo/Kate]
https://forum.xda-developers.com/redmi-note-3/development/firmware-hmnote3proglobal-t3574361
ahmet ferid said:
follow this link: [Firmware] Redmi Note 3 Pro [Kenzo/Kate]
https://forum.xda-developers.com/redmi-note-3/development/firmware-hmnote3proglobal-t3574361
Click to expand...
Click to collapse
But for flyme os which is the firmware i need for volte?!
Sent from my Redmi Note 3 using XDA Labs
hajik2029 said:
But for flyme os which is the firmware i need for volte?!
Sent from my Redmi Note 3 using XDA Labs
Click to expand...
Click to collapse
Rom made for kenzo. my device kate and i can use it as 4g. Look to SS, write 4G
Download links for Kenzo only : Global stabil
8.5.7.0: https://androidfilehost.com/?fid=889964283620761246
0r
Download links for Kenzo only : Global DEv
7.11.2: https://androidfilehost.com/?fid=673791459329058563
If this is not the solution, review xda links for volte https://forum.xda-developers.com/redmi-note-3/development
ahmet ferid said:
If this is not the solution, review xda links for volte https://forum.xda-developers.com/redmi-note-3/development
Click to expand...
Click to collapse
Anyway Thanks for helping
hajik2029 said:
Anyway Thanks for helping
Click to expand...
Click to collapse
Could this patch be the solution?
VolteFix by jamflux.zip
for the Xiaomi Redmi Note 3 Pro(kenzo), by jamflux
https://androidfilehost.com/?fid=889964283620761693
if you want try it.
If there is a solution please provide please give information for I will be add
Rom is smooth as hell. But cant see images saved in sd card in the gallery app
SeanRex said:
Rom is smooth as hell. But cant see images saved in sd card in the gallery app
Click to expand...
Click to collapse
I am not living any problems with it. maybe you need to do wipe cache.
ahmet ferid said:
Could this patch be the solution?
VolteFix by jamflux.zip
for the Xiaomi Redmi Note 3 Pro(kenzo), by jamflux
https://androidfilehost.com/?fid=889964283620761693
if you want try it.
If there is a solution please provide please give information for I will be add
Click to expand...
Click to collapse
Report if it works
Guys volte option is off by default. Turn it on
Add some screenshots to the Topic please help when choosing between testing or not
SeanRex said:
Guys volte option is off by default. Turn it on
Click to expand...
Click to collapse
yes you are right
nairaldo said:
Add some screenshots to the Topic please help when choosing between testing or not
Click to expand...
Click to collapse
I write above I add all of them
See the following link for user [kaizenTR] screenshots: https://forum.miuiturkiye.net/konu/f...zo-kate.18020/
and I've tried I can not do it here bro
not added after first publication on page or I can not found
Updated on 17th March 2019
I am not responsible for brick your devices, Please flash at your own risk, but i tested, i can help you save brick devices also, can contact me anytime at hangouts.
Note:
I developed this ROM and tested as well,
Change log: 17/03/2019
1: Synced latest Source
2: Embedded March 05 Security patch
3: Minor fixes with Mokee device Trees
4: NFC (please Check and confirm)
What's not working:
Please tell.
Hey Folks:
Always bring something new and different for Victara device,
Lineage MOS. 8.1.0 Unofficial (STABLE VERSION) for Victara Moto x2 2014 Developed by weibo.com/diyroms
Lineage Unofficial 8.1.0, developed by Montana team. link: https://github.com/montanadevelopment
Credits: All Montana Development Team
Credits: Micheal Chen and team for MOS (Moonlight OS, Lineage 8.1.0)
Dated: 03rd June 2018
Battery life is very very good in this stable version
What's not working
1: Pattern lock late response first time.
2: HDR (waiting for Fix)
Other you can tell
What's Working:
1:Almost everything you need for daily use
2: Video recording working
Other you can check and report bugs for improvement
What you need:
MOTO X2 2014 Victara device
( Unlocked boot loader having TWRP 3.2.1.0 old versions won't work for 8.1)
[GUIDE] (Please Read after point 5 with concentration)
1: Download ROM and Unofficial 8.1 Gapps nano or as your taste from below links
2: Open TWRP and prepare all internal storage backup and your NANDROID backup.
3: Open Wipe, Advance Wipe and Change file system and Format Data, system, Cache with ext4
This will erase all your data (If you are already at ext4 then no need to wipe with ext4)
4: Now in TWRP connect device with PC or have a OTG USB with files and copy files in internal storage i.e. ROM zip and gapps zip
5: Now flash ROM zip and reboot system and setup everything in Lineage setup
6: You will see some Chinese apps, You can remove them by Root uninstaller, this ROM is rooted by default.
7: Go to setting, developer options and click advance reboot.
8: Now reboot to Recovery and go to gapps and flash then reboot. (You must have latest gapps from opengapps.org or you will need to update play services manually)
Here you done.
Source: https://github.com/LineageOS/android/tree/lineage-15.1
Kernel: https://github.com/zahidmgsk/android_kernel_motorola_msm8974
Device Trees: https://github.com/zahidmgsk/android_device_motorola_victara/tree/mko-mr1
Vendor: https://github.com/TheMuppets/proprietary_vendor_motorola/tree/lineage-15.1
If any issue please ask me at G+ anytime
Download Link Lineage 15.1 Unofficial Gdrive 11.04.2019
https://drive.google.com/file/d/1Ql5xw9I_UlGUC6gfOKI9it-N-e7hVmqV/view?usp=drivesdk
Download Link for MOS. Stable Version 5.0 Dated 12.11.2018
https://mega.nz/#!5j4iyQzT!21w7uH3OoldpEB68Sh7jLTWFLKDQdyg9JEZxZhC2i84
Version 5.0 updated on 12.11.2018
GAPPS Official 8.1.0: LINK
https://opengapps.org/
ALL DONE HERE
i have already tested this ROM Very good battery and smooth ROM... as far as will get next Update then share according...
SEE YA...
Reserved and SS @Archangel try this
Did the NFC work?
ColorfulNight said:
Did the NFC work?
Click to expand...
Click to collapse
I don't think so, because still there js no fix for victara 8.1,
zahidm said:
I don't think so, because still there js no fix for victara 8.1,
Click to expand...
Click to collapse
Nice to see an actual LOS build! thank you. Did you included patches for Camera HAL1? Will test on weekend when i find some time.
bejunk said:
Nice to see an actual LOS build! thank you. Did you included patches for Camera HAL1? Will test on weekend when i find some time.
Click to expand...
Click to collapse
I sent all data to Chen you can check and verify if not than i can ask him to add in next build.
what does MOS stand for? I know Lineage "OS" is Operating System
renzs said:
what does MOS stand for? I know Lineage "OS" is Operating System
Click to expand...
Click to collapse
After L there is M so we made it MOS ?
Always on display
Does it support Always on display, I mean is there any setting to set ambient display to always on?
What about pixel style navigation bars?
Nirmal Rai said:
Does it support Always on display, I mean is there any setting to set ambient display to always on?
What about pixel style navigation bars?
Click to expand...
Click to collapse
Yes there is always on setting, and this is actual lineage source so no pixel style navigation bar.
Battery
Battery life if always on display enabled?
Nirmal Rai said:
Battery life if always on display enabled?
Click to expand...
Click to collapse
Yes i am using user awake display and i got about 3 hours 25 min of screen on time.
Hello, could you please provide the link for the source code?
Won't support multilanguage...
jeferson1979 said:
Won't support multilanguage...
Click to expand...
Click to collapse
Yes it is, please follow procedure property
zahidm said:
Yes it is, please follow procedure property
Click to expand...
Click to collapse
Im using pico gapps, and done all the recommended, will try with nano or mini
jeferson1979 said:
Im using pico gapps, and done all the recommended, will try with nano or mini
Click to expand...
Click to collapse
So you have no multi language support? You flashed ROM and Gapps together?
InnerSanctum said:
Hello, could you please provide the link for the source code?
Click to expand...
Click to collapse
Hey it's really easy to download build sources, but huge files you tried a Git hub?
zahidm said:
So you have no multi language support? You flashed ROM and Gapps together?
Click to expand...
Click to collapse
Do it step by step. with stock gapps, same result, the rom only shows english and chinese, gapps are on pt-br, but system still as reported.
Sorry for my bad english
jeferson1979 said:
Do it step by step. with stock gapps, same result, the rom only shows english and chinese, gapps are on pt-br, but system still as reported.
Sorry for my bad english
Click to expand...
Click to collapse
After flashing go to system, language and add a language and tell me how many languages are there..
And also try these gapps in link below..
https://mega.nz/#!BuJx0CQT!dt5SKKnWT5aFkvYPUkcn5vPI2AW0zK47r479pkqmtWk
Xiaomi.EU 21.1.10 Android 10 Ported by Rashid Malyk
Device: Redmi 5 Plus
🗓 Build Date: 10/01/21
Build version: 21.1.10
MIUI version: 12.5
Android Version: 10.0 Q
🖥 Developed by: t.me/rashidmalyk
What's Working?
RIL
WiFi
Hotspot
Bluetooth
Stock Mi Radio
MI Sound Enhancer
MiCamera
Vibration
LED (offline charging LED)
CTS passed with Magisk
Auto Brightness
XiaomiParts and Tweaks
Goodix and FPC Fingerprint
and all MIUI features..!
Changes log:
1. Most important; the apps opening delay is finally fixed
2. The system ui and system apps opening delay is also fixed
3. Improved ram management
4. I can feel it, it would be smoothest build ever
5. You guys already know the changes of MIUI 12.5
6. Messaging app is so smooth now
Rest things are the same like previous ports
Bugs:
Switching FM to speaker isn't working, on headphone MI Radio is working
How to Install?
1. Unlock Bootloader
2. Install OrangeFox R11 Recovery
3. Wipe Cache, System, Vendor, Data Partitions (format internal storage is not necessary)
4. Flash ROM zip and Reboot to System
5. Magisk v20.3 and v21 are compatible (optional)
Donate me a Coffee
Paypal: https://paypal.me/rashidmalyk
Skrill: [email protected]
Download Link: (mirror links are also available, check YouTube video's description)
vince MIUI 12.5 Xiaomi.EU Q ROM by @RashidMalyk.zip
drive.google.com
ROM Review:
Note: You can join discussion group at Telegram t.me/vincePYA, for any query leave comment here and/or YouTube comments section or follow me at Telegram t.me/rashidmalyk
whats the fps on ppsspp tekken 6 running on default settings pleas share ill try it if its stable
ROM works very smooth. Fond no bugs so far.
foxmonter said:
ROM works very smooth. Fond no bugs so far.
Click to expand...
Click to collapse
Try playing any games or emulator like citra or ppsspp like tekken 6
samsungics1200 said:
Try playing any games or emulator like citra or ppsspp like tekken 6
Click to expand...
Click to collapse
Sorry i dont play games... is for work only...
HEY ! is best miui12 rom so far....
Thanks Rashid for your continuous efforts for keeping our device alive.
I'm on orangefox 10.0 stable, which recovery is recommended, because i have backups that i might need to restore in case something goes wrong and might want to revert to a working backup?
I'm using stock xiaomi.eu 10 stable. A8.1
Also which magisk version should we use?
Flashing procedure and / or prerequisites are missing from op..
Bi0haZarD said:
Thanks Rashid for your continuous efforts for keeping our device alive.
I'm on orangefox 10.0 stable, which recovery is recommended, because i have backups that i might need to restore in case something goes wrong and might want to revert to a working backup?
I'm using stock xiaomi.eu 10 stable. A8.1
Also which magisk version should we use?
Flashing procedure and / or prerequisites are missing from op..
Click to expand...
Click to collapse
Updated op now..! thanks
rashidmalyk said:
Updated op now..! thanks
Click to expand...
Click to collapse
Excellent work as always Rashid!!
I will find some time after work today, do the necessary preparations/backups and provide feedback on your marvelous work.
Your dedication and love for your work will pay off, I wish all the best for you and your family.
Best regards, and wish you a wonderful day
Hi,
It works like a charm!
Just a little issue for the wifi (Wifi disappears after the first connection) , i had to reset wifi settings to fix it.
Thank you very much rashidmalyk
Takezo90o said:
Hi,
It works like a charm!
Just a little issue for the wifi (Wifi disappears after the first connection) , i had to reset wifi settings to fix it.
Thank you very much rashidmalyk
Click to expand...
Click to collapse
The bug with the wifi is not a bug, it is caused by any router. Each time miui 12 connects to your router or any other router, changes the mac address of your wifi adapter for privacy reasons. You can set it to device default to avoid this issue.
Bi0haZarD
Great to know!
Takezo90o said:
Bi0haZarD
Great to know!
Click to expand...
Click to collapse
Glad to have helped! Enjoy
the quick setting to turn on the led flash by pressing the power button twice does not work.
Nice rom !!!
Nice miui 12 rom. I'm having some problems charging my phone, they are very slow. I came from Miui 11 stock using original xiaomi charger. With ampere open they barely hit 500mA but if I change to recovery mode they charge normally. Thank you for you time the rom is smooth!!
bro can you please guide me how to enable carrier video calling
i tried to edit with build prop but can't do it
even i disabled cam2 api
please help me
rashidmalyk said:
Xiaomi.EU 21.1.10 Android 10 Ported by Rashid Malyk
Device: Redmi 5 Plus
🗓 Build Date: 10/01/21
Build version: 21.1.10
MIUI version: 12.5
Android Version: 10.0 Q
🖥 Developed by: t.me/rashidmalyk
What's Working?
RIL
WiFi
Hotspot
Bluetooth
Stock Mi Radio
MI Sound Enhancer
MiCamera
Vibration
LED (offline charging LED)
CTS passed with Magisk
Auto Brightness
XiaomiParts and Tweaks
Goodix and FPC Fingerprint
and all MIUI features..!
Changes log:
1. Most important; the apps opening delay is finally fixed
2. The system ui and system apps opening delay is also fixed
3. Improved ram management
4. I can feel it, it would be smoothest build ever
5. You guys already know the changes of MIUI 12.5
6. Messaging app is so smooth now
Rest things are the same like previous ports
Bugs:
Switching FM to speaker isn't working, on headphone MI Radio is working
How to Install?
1. Unlock Bootloader
2. Install OrangeFox R11 Recovery
3. Wipe Cache, System, Vendor, Data Partitions (format internal storage is not necessary)
4. Flash ROM zip and Reboot to System
5. Magisk v20.3 and v21 are compatible (optional)
Donate me a Coffee
Paypal: https://paypal.me/rashidmalyk
Skrill: [email protected]
Download Link: (mirror links are also available, check YouTube video's description)
vince MIUI 12.5 Xiaomi.EU Q ROM by @RashidMalyk.zip
drive.google.com
ROM Review:
Note: You can join discussion group at Telegram t.me/vincePYA, for any query leave comment here and/or YouTube comments section or follow me at Telegram t.me/rashidmalyk
Click to expand...
Click to collapse
Hi Rashid,
Just flashed this rom with twrp 3.2 and procedure was completed as butter. But turned on phone, showing miui and said data is corrupted format phone. Idk its because of twrp or anything else. But it happened thrice today. Can you please help? Tried orangefox but even after typing correct password it's not decrypting my data. Hope you'll be able to help.
Regards
Ehsanur Rahman said:
Hi Rashid,
Just flashed this rom with twrp 3.2 and procedure was completed as butter. But turned on phone, showing miui and said data is corrupted format phone. Idk its because of twrp or anything else. But it happened thrice today. Can you please help? Tried orangefox but even after typing correct password it's not decrypting my data. Hope you'll be able to help.
Regards
Click to expand...
Click to collapse
Use orangefox 10.1 stable for encryption / decryption, orangefox 11 beta has bug with encryption / decryption.
If you can't decrypt with orangefox 10.1, you can FORMAT (not WIPE) internal memory to remove encryption.
And don't forget to BACKUP your important data.
Hi sir I am a problem with this rom
I can't copy 2 or 3 file from internal storage to otg flash my phone is hanging or speed copy is 0% freeze
And next problem in the WhatsApp not show my contact name just number show
Plz help me sir rashid dear.tanx
hello, and thanks for the job. I have a (bad) question: I read that it is advisable to use orange fox R11, can we use TWRP? (sorry for the bad english, i'm french speaking and use a translator) thank you in advance.
Olly706 said:
hello, and thanks for the job. I have a (bad) question: I read that it is advisable to use orange fox R11, can we use TWRP? (sorry for the bad english, i'm french speaking and use a translator) thank you in advance.
Click to expand...
Click to collapse
Better use Orangefox 10.1 stable. It is based off TWRP and doesn't have the issues the original TWRP had with Redmi 5 plus.
Orangefox 11 is beta and has bug with encryption / decryption..