Database Users

problem P8 lite

please can someone help me
after installing TWRP Recovery my huawei p8 lite is bloqued on menu twrp
reboot --- system
he return too twrp menu
:crying::crying::crying::crying::crying:

Just download the file:
https://mega.nz/#!lEcGQZCC!X2fmOZ-ShY-Kx-9lwnSUN16Vo52_aU0i4K1KmdBW64Q
Boot up into fastmode: vol down + on off button at the same time for 10 seconds
Make sure your usb cable is connected to your computer.
Extract the zip file to your computer.
Go into a command prompt and go to the unzipped directory.
Once in the directory type the command : mfastboot flash recovery recovery.img
Now the stock recovery should be installed on your system.
If the system still does not startup try the bat file FLASH-ALL.bat in the same unzipped directory. (this will erase all your data !!!)

Help!! Debrand huawei p10 lite

Can anyone plz help me to debrand my huawei p10 lite
WAS-LX1AC185 Dual sim 4gb version to WAS-LX1AC432
I want step by step procedure plzzz help......
Thanks in advance

Step 1
unlock bootloader: https://hwid5.vmall.com/CAS/portal/loginAuth.html?lang=en-us&validated=true&themeName=red&service=https%3A%2F%2Femui.huawei.com%2Fen%2Fplugin%2Fhwlogin%2Fvalidate%3Fru%3D%252F%252Femui.huawei.com%252Fen%252Fplugin%252Funlock%252Findex&loginChannel=22000000&reqClientType=2023
adb installer(c:/)http://www14.zippyshare.com/v/ufYG71o0/file.html
oem unlock: avout phone<build number(press several times), enable it in developer settings (yes or yes)
oeminfo https://forum.xda-developers.com/p10-lite/how-to/huawei-p10-lite-oeminfo-collection-t3670325
twrphttps://mega.nz/#!8JwhzBzD!jiuod03amEPlWpo1LD7GWiwP62Z9I97F_TEarmXRrFU
serviceRom:http://androidhost.ru/JT
offtopic: copy to safe place serial number, productid and bootloade code, oeminfo. yes or yes.
Step 2
-Download and extract serviceRom b182 and oeminfo dualsim.
-insert sdcard on laptop and create a dload folder, now copy update.app and was folders(inside of dload) to dload folder on your sdcard.
-Open cmd type cd c:/adb, then reboot device to fsstboot mode with vol- & power,already in fastboot type in cmd fastboot oem unlock yourcode(reboot and config device until finish), reboot again to fastboot and type in cmd fastboot flash recovery recovery.img, finished with vol+ type fastboot reboot until erecovery. Poweroff and and unplug usb from device and press vol+ and power till reboot to twrp.
- In twrp previously insert the sdcard to device slot, make a backup only oeminfo(copy to safe place), on your laptop copy and replace the c432 to backedup oeminfo(twrp backup folder), then restore in twrp.Finished poweroffand unplug press vol -/+ and power buttons until start update.
Onething if update stop at five or 49 or so, means you dont copy was folders correctly.Before do something if you have doubt question please

foliaje said:
Step 1
unlock bootloader: https://hwid5.vmall.com/CAS/portal/loginAuth.html?lang=en-us&validated=true&themeName=red&service=https%3A%2F%2Femui.huawei.com%2Fen%2Fplugin%2Fhwlogin%2Fvalidate%3Fru%3D%252F%252Femui.huawei.com%252Fen%252Fplugin%252Funlock%252Findex&loginChannel=22000000&reqClientType=2023
adb installer(c:/)http://www14.zippyshare.com/v/ufYG71o0/file.html
oem unlock: avout phone<build number(press several times), enable it in developer settings (yes or yes)
oeminfo https://forum.xda-developers.com/p10-lite/how-to/huawei-p10-lite-oeminfo-collection-t3670325
twrphttps://mega.nz/#!8JwhzBzD!jiuod03amEPlWpo1LD7GWiwP62Z9I97F_TEarmXRrFU
serviceRom:http://androidhost.ru/JT
offtopic: copy to safe place serial number, productid and bootloade code, oeminfo. yes or yes.
Step 2
-Download and extract serviceRom b182 and oeminfo dualsim.
-insert sdcard on laptop and create a dload folder, now copy update.app and was folders(inside of dload) to dload folder on your sdcard.
-Open cmd type cd c:/adb, then reboot device to fsstboot mode with vol- & power,already in fastboot type in cmd fastboot oem unlock yourcode(reboot and config device until finish), reboot again to fastboot and type in cmd fastboot flash recovery recovery.img, finished with vol+ type fastboot reboot until erecovery. Poweroff and and unplug usb from device and press vol+ and power till reboot to twrp.
- In twrp previously insert the sdcard to device slot, make a backup only oeminfo(copy to safe place), on your laptop copy and replace the c432 to backedup oeminfo(twrp backup folder), then restore in twrp.Finished poweroffand unplug press vol -/+ and power buttons until start update.
Onething if update stop at five or 49 or so, means you dont copy was folders correctly.Before do something if you have doubt question please
Click to expand...
Click to collapse
Does after debrand my dual sim work properly bcoz now on c185 i have dual sim

MDabrar said:
Does after debrand my dual sim work properly bcoz now on c185 i have dual sim
Click to expand...
Click to collapse
yes

foliaje said:
yes
Click to expand...
Click to collapse
Doea this method works 100% or any problems will occur

MDabrar said:
Doea this method works 100% or any problems will occur
Click to expand...
Click to collapse
works if you follow the guide

followed this and stuck in bootloop,can't access recovery nor fastboot.a little help please?

Go back to the original firmware for all Huawei-Series via UPDATE.APP extract.

If you want to go back to the original firmware. Here is a little guide.
First, download your firmware at https://easy-firmware.com/home/browse/category/id/337/.
Then you extract the UPDATE.APP from this archive.
Next, load the splitupdater from here: https://github.com/marcominetti/split_updata.pl.
Moves the folder split under Downloads and copies the UPDATE.APP into it.
Then open the terminal and enter the following.
1. cd downloads
2. ls
3. cd split
4. # copy splitupdate, crc and UPDATE.APP files
5. chmod + x splitupdate
6. chmod + x crc
7. ./splitupdate UPDATE.APP
Now you boot your Huawei in the fast boot mode first connect the USB cable and at the same time hold down the volume down button until the Fastboot mode appears.
Then you just need to install the files BOOT.img, RECOVERY.img and SYSTEM.img via the terminal with the following command. The 3 files can be found in the split output folder.
1. fastboot devices
2. fastboot flash boot BOOT.IMG
3. fastboot flash recovery RECOVERY.img
4. fastboot flash system SYSTEM.img
5. fastboot reboot
Now you have a fresh clean install again.
I hope that the guide will help you with missteps of Custom Roms that are listed here.
Greetings Jack241287

No OS, Relocked and now bootloop!!!

i recently tried to downgrade my Mediapad M3 (btv-w09), but somehow screwed up...
1. rebooted in twrp and formatted system, data, cache, internal
2. i downgraded to emui 4 dload method it worked and i booted to fastmode and installed wrong twrp
3. stupidly i also relocked the bootloader
4. finnaly im stucked in a bootloop and cant enter recovery, erecovery or fastboot and not even dlload
i get 2 bootloop screens
one where you have the 3 options and one where it just saying device will boot...
maybe anyone knows how to unbrick!?
thx

yes.... you need same tools...

solved my problem
my problem was that i wanted to try the dload method, so i drained the battery but after that i could not recharge it because the tablet first boot then starts to charge and for the dload you need at least 10% .....
the solution (should work for all Huawei devices) :
---------------------------------------------------------------
1. If you have enough battery but cant boot to fastboot by pressing volume down + power button
- press volume down and plug the charging cable (which should be connected to your pc, not charger!!!)
2.If you have dont enough battery
- press volume up and plug the charging cable (which should be connected with the pc)....this will prevent a boot and let you charge your device, to try the dload method
to enter dload :
--------------------
1. from your tablet type ()()2846579()() in your calculator (landscape mode)
2. turned off tablet (bricked): volume up + volume down + power button
Some Links for those who wants to downgrade their M3 to EMUI4:
------------------------------------------------------------------------
- Rollback files can be found here:
https://consumer.huawei.com/it/support/tablets/mediapad-m3-8/
- TWRP
https://androidfilehost.com/?w=files&flid=125388
be carefull for EMUI4 only download twrp_BTV-W09_greatslon or twrp_BTV-DL09_greatslon.img (twrp_BTV-DL09_5_greatslon.img & twrp_BTV-W09_5_greatslon.img are just for EMUI5 )
- Root
Magisk : https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
SuperSU for EMUI4 : https://androidfilehost.com/?fid=962187416754458671
PS: EMUI4 is 1000x better then EMUI5 for the M3

Great post. Wish it had appeared much earlier.
I screwed up and tried to use the downgrade-to-Marshmallow packages whilst already in Marshmallow, thus soft-bricking the M3.
https://forum.xda-developers.com/mediapad-m3/help/m3-apsabnormal-bricked-t3779100
“Volume Up + Volume Down and Power Button” method no longer works. The machine no longer boots into Android.
Are the partitions and e-recovery damaged and there is no way to flash the M3 now?
Any suggestions welcome!
Thanks.

sam10000 said:
Great post. Wish it had appeared much earlier.
I screwed up and tried to use the downgrade-to-Marshmallow packages whilst already in Marshmallow, thus soft-bricking the M3.
https://forum.xda-developers.com/mediapad-m3/help/m3-apsabnormal-bricked-t3779100
“Volume Up + Volume Down and Power Button” method no longer works. The machine no longer boots into Android.
Are the partitions and e-recovery damaged and there is no way to flash the M3 now?
Any suggestions welcome!
Thanks.
Click to expand...
Click to collapse
No dont think that your devices is bricked, had the same problem and it worked out for me !!!
if you can boot into fastboot :
------------------------------------------
1. download rollback files & extract the dload on your desktop
2. download Huawei Update Extractor [UPDATED: v0.9.9.5]
https://forum.xda-developers.com/showthread.php?t=2433454
3. watch the how to use video
https://www.youtube.com/watch?v=XAtoaL6i_i0
4. extract thise .img files
- BOOT.img
- CUST.img
- RECOVERY.img
- RECOVERY2.img
- SYSTEM.img
5. flash those files zsing this commands
fastboot flash boot BOOT.img
fastboot flash cust CUST.img
fastboot flash recovery RECOVERY.img
fastboot flash recovery2 RECOVERY2.img
fastboot flash system SYSTEM.img
fastboot reboot
if you can't boot into fastboot :
-----------------------------------------------
- press volume up and plug the charging cable (which should be connected to a pc)....this will prevent a boot and let you charge your device and wait till your tablet charges and it will boot into erecovery then try online download or the dload method
good luck

lukanz said:
No dont think that your devices is bricked, had the same problem and it worked out for me !!!
if you can boot into fastboot :
------------------------------------------
1. download rollback files & extract the dload on your desktop
2. download Huawei Update Extractor [UPDATED: v0.9.9.5]
https://forum.xda-developers.com/showthread.php?t=2433454
3. watch the how to use video
https://www.youtube.com/watch?v=XAtoaL6i_i0
4. extract thise .img files
- BOOT.img
- CUST.img
- RECOVERY.img
- RECOVERY2.img
- SYSTEM.img
5. flash those files zsing this commands
fastboot flash boot BOOT.img
fastboot flash cust CUST.img
fastboot flash recovery RECOVERY.img
fastboot flash recovery2 RECOVERY2.img
fastboot flash system SYSTEM.img
fastboot reboot
if you can't boot into fastboot :
-----------------------------------------------
- press volume up and plug the charging cable (which should be connected to a pc)....this will prevent a boot and let you charge your device and wait till your tablet charges and it will boot into erecovery then try online download or the dload method
good luck
Click to expand...
Click to collapse
Many thanks for your encouraging reply.
However, I am not sure I can flash
*****5. flash those files zsing this commands
fastboot flash boot BOOT.img
fastboot flash cust CUST.img
fastboot flash recovery RECOVERY.img
fastboot flash recovery2 RECOVERY2.img
fastboot flash system SYSTEM.img
fastboot reboot*****
because my M3 has a locked bootloader (the bootloader has never been unlocked), did not have USB debugging selected, has never been rooted, and no TWRP installed.
Anyway, if I can get into fastboot mode, I'll give method (1) a try. Should I connect the M3 to a PC and use ADB to flash?
Thanks again.

lukanz said:
solved my problem
PS: EMUI4 is 1000x better then EMUI5 for the M3
Click to expand...
Click to collapse
In what ways is EMUI 4 better for the M3, if I may ask? Thanks.

sam10000 said:
In what ways is EMUI 4 better for the M3, if I may ask? Thanks.
Click to expand...
Click to collapse
its just my opinion, but if feel snappier, battery is also better i think...

sam10000 said:
Many thanks for your encouraging reply.
However, I am not sure I can flash
*****5. flash those files zsing this commands
fastboot flash boot BOOT.img
fastboot flash cust CUST.img
fastboot flash recovery RECOVERY.img
fastboot flash recovery2 RECOVERY2.img
fastboot flash system SYSTEM.img
fastboot reboot*****
because my M3 has a locked bootloader (the bootloader has never been unlocked), did not have USB debugging selected, has never been rooted, and no TWRP installed.
Anyway, if I can get into fastboot mode, I'll give method (1) a try. Should I connect the M3 to a PC and use ADB to flash?
Thanks again.
Click to expand...
Click to collapse
Sam10000 - wondering if this resolved your problem? I'm in the same boat, although it looks like the rollback files are no longer available for download.

Sorry wrong forum. I already edited message and post it other place. Please remove this.

install PitchBlack Recovery on Redmi Note 6 Pro [PBRP]

1. First Unlock the Bootloader of Your Phone. (Attention: Unlocking the bootloader will erase all your data! So please back up your data before you unlock the bootloader)
2. Download The PitchBlack Recovery zip file here.
3. Download the Platform Tools folder here and unzip the folder on your desktop.
4. Unzip the PitchBlack Recovery zip folder and copy the recovery.img form TWRP folder and paste in the Platform tool folder.
5. Enter the fastboot mode by holding together "Volume Down + Power" and connect your device to your computer via USB cable (best would be the original cable)
6. Opne the command Prompt WIndow son the Platforms tool folder.
7. Now enter the following command to flash recovery.
fastboot flash recovery recovery.img
8. Now boot your phone in recovery.
fastboot boot recovery.img
9. Once your phone PBRP recovery copy the Pitch Balck Recovery Zip in the phone.
10. Install the Pitch Balck Recovery Zip file.
11. Reboot > System
Done
.

Hi,
I installed this recovery. But evry time I boot into recovery, it said enter password. Then I installed DM verity disabler. after that installed this recovery zip file. Now seems working.
But, when I checked the developer options, it isn't showing device is unlocked. It says "this device is locked", and it wants me to bind account to unlock.
I checked by fastboot, and it says device unlocked = true.
Why developer options shows device is locked?
Installed rom is global stable 10.0.5.0
What must I do to developer options unlock status show true(locked).
thanks...

cannot mount storage, please help