Can't install Alliance ROM - Galaxy Note 4 Q&A, Help & Troubleshooting

Hi some advice needed please. I boot to TWRP. It is running fine. I've got Alliance on SD. Alliance install runs for a few seconds then stops and says it's done. I clear the cash and reboot. I get the Sam bootscreen and that's it. I've tried to reinstall TWRP image backup but I can't get those to install either. Eek!! :0[
I've tried with other ROMS but I get the same ****. What am I doing wrong?
Thanks!!

Related

[Q] Rooted, custom rom installed but not booting anymore

Hello,
Ii have rooted my S4 device with the procedure from XDA (root original rom with keeping update availability). This was done succesfully. After that TWRP was flashed without problems. Than i decided to installl Omega 9 custom rom. The installation went fine and i could use it for three days. A great rom but after a restart my device will not boot anymore and shows only the Samsung logo. Wiping is possible but trying to restore a backup failed....... Do i have to apply root again? Any help is appreciated to solve my problem! Thanks a lot.
Best regards,
Mark
Dataking said:
Hello,
Ii have rooted my S4 device with the procedure from XDA (root original rom with keeping update availability). This was done succesfully. After that TWRP was flashed without problems. Than i decided to installl Omega 9 custom rom. The installation went fine and i could use it for three days. A great rom but after a restart my device will not boot anymore and shows only the Samsung logo. Wiping is possible but trying to restore a backup failed....... Do i have to apply root again? Any help is appreciated to solve my problem! Thanks a lot.
Best regards,
Mark
Click to expand...
Click to collapse
Go to recovery and try wipe cache dalvik and fix permissions and reboot should work fine
.
Wipe Dalvik cache shows error: FAILED
Dataking said:
Hello,
Ii have rooted my S4 device with the procedure from XDA (root original rom with keeping update availability). This was done succesfully. After that TWRP was flashed without problems. Than i decided to installl Omega 9 custom rom. The installation went fine and i could use it for three days. A great rom but after a restart my device will not boot anymore and shows only the Samsung logo. Wiping is possible but trying to restore a backup failed....... Do i have to apply root again? Any help is appreciated to solve my problem! Thanks a lot.
Best regards,
Mark
Click to expand...
Click to collapse
Install Philz Touch recovery in downloadmode, this will help you http://d-h.st/wSF.
I reflashed Philz Touch with ODIN successfully but the recovery mode did not came up. How is this possible? Back to TWRP now with same problems......
If you already have the omega 9 rom in your phone...try to reflash it via recovery .....don't have to wipe data....but do it to be safe....I think it should work...I really hope it works...sorry about your phone
sadeshmagic said:
If you already have the omega 9 rom in your phone...try to reflash it via recovery .....don't have to wipe data....but do it to be safe....I think it should work...I really hope it works...sorry about your phone
Click to expand...
Click to collapse
Already flashed it several times but still hanging in the boot and no way to use the phone.
Dataking said:
Already flashed it several times but still hanging in the boot and no way to use the phone.
Click to expand...
Click to collapse
Well the only other option is to download a ROM that can be flashed via Odin.....hopefully your download mode works.....i think you can find several compatible ROMs in the forums.....try that out....as a last resort
sadeshmagic said:
Well the only other option is to download a ROM that can be flashed via Odin.....hopefully your download mode works.....i think you can find several compatible ROMs in the forums.....try that out....as a last resort
Click to expand...
Click to collapse
Well, download mode works fine, TWRP works fine, flashing ROM works fine, ROM itselfs works great, until i have to reboot. After booting it hangs in the boatloader and i have to flash rom again.........................to get access.
Dataking said:
Well, download mode works fine, TWRP works fine, flashing ROM works fine, ROM itselfs works great, until i have to reboot. After booting it hangs in the boatloader and i have to flash rom again.........................to get access.
Click to expand...
Click to collapse
Well do you merely flash the ROM? try wiping cache afterwards and setting permission....if that doesn't work try to reflash stock firmware....thats your best bet
:good::good::good::good:
I found the solution using method 3:
http://www.ibtimes.co.uk/articles/4...i9500-gti9505-unbrick-softbrick-hardbrick.htm
This will help some other people too.

[Q] !!!Assistance needed!!! Problems with almost every ROM!

I am trying to install the Sammy Deluxe Custom Rom, but when i did it got stuck on the boot animation and kept restarting again and again with 2 fast vibrations.
I tried installing a diferent S5-like ROM and ended up with the screen showing Samsung Galaxy S4 GT-I9505 and not going any further than that.Note that i installed a less consuming, 459 MB ROM 4.4.4 AOSP and worked fine. Now i unrooted and went back to stock for the moment, but i would really like to make Sammy Deluxe work.
That being said, here are the steps i followed:
1.Root the phone via the galaxys4root*[email protected] method via the motochopper application. It installed superuser but it didnt give me access to it, telling me it had to update and giving the options Cancel/Install/Recovery Install. Neither worked.
2.Root the phone via an apk found here on xda. Worked like a charm and Superuser updated.
3.Install Twrp. Put the .img file in the sdcard and typed command on Android Emulator. Flashed the .tar file via Odin.
4.Go to recovery, follow the guide steps(Full wipe, Advanced wipe, Install Rom), choose the settings i wanted in installer and reboot the system.
After i rebooted i got to what i typed on the first row, boot animation crash and double vibration restart.
Click to expand...
Click to collapse
So what did i do wrong?How can i install the ROM correctly?

[Q] Can't flash ROM or restore backup

Hello there.. I normally don't have a problem figuring out what to do but I'm totally stuck here. I have a Sprint Galaxy S4 SPHL720T. I was rooted and running a custom ROM. I was having issues with the wifi so I decided to flash back to GPE 5.0.1 here from the xda forums. I am running twrp v2.8.4.0. I made a backup and wiped system/data/cache and dalvik. I went to install JFLTE-GPE-20150303 (LRX22C) from ultimarom.com via here at XDA. It said zip is corrupt. So i redownloaded on my PC and transferred it to my sd card. Still said corrupt. So I downloaded a different ROM on my PC and moved to SD. Still said corrupt. I tried to flash a GAPPS package and it worked but no ROMS I tried would. I tried to install my latest backup through recovery. It said MD5 doesn't match. If I hit reboot in twrp it prompts to install superuser because the phone doesn't appear to be rooted. If I hit that it runs the script for about 2 seconds then reboots. It won't boot into the OS as there is no OS and if I reboot into recovery it still gives me the "install su" prompt at the reboot screen. So then I hooked up into ODIN and download mode and flashed "CF-Auto-Root-jflterefreshspr-jflterefreshspr-sphl720t.tar.md5" and "openrecovery-twrp-2.8.4.0-jfltespr.tar". Still having the same issues. I have no idea what to do at this point. Any help would be GREATLY appreciated as I need my phone for work and play .
Thanks,
Aaron

Bootloop after first restart with multiple CFWs!

Hi guys,
I have the standard note III 9005 and I had always installed CFWs on it.
I wanted to update to newer 6.0.1 Roms (had 6 roms before) but I seem to have a VERY annoying bug:
I tried to install Temaseks rom and resurrection rom but I had huge issues with it. I got bootloops although I got the newest 3.0.2.0 Team Win Recovery Project
I installed rom, GAPPS (correct version of course 6.0.1) , install rom again then delete cache and then it worked on both roms.
So a simple "install rom, GAPPS, then clean cache" didnt work. I tried to install multiple times until I got the installation! YAY! BUUUT!
Here is the fun part:
If I restarted the phone acidentally or on purpose I got stuck in a bootloop. After that the phone was unuseable again so the installation was useless.
Only solution is to completely wipe and reinstall and experiment with the order of installation until it works!
I did install STOCK rom because I was so freaked out and then went with ODIN the complete rooting guide for clean rooting, but still problem exists.
I tried two other roms but the problem was that while flashing the phone restarted automaticly and then TWRP said no installed rom? ???
Huge thanks for helping me!
New info:
I was able to make the rom work. I restarted and got stuck into bootloop!
I could boot normally after deleting dalvik cache!
But after rebooting I got into bootloop. Tried deleting cache again but this time it never booted properly.
How can I avoid by always deleting dalvik whenever I have to restart my phone (if battery dies or purpose)?
PPS: Stock Rom flash works flavlessly. I am waiting in stock rom until I find a proper solution :"(
Suggest you read the roms faqs and Q&A particularly with regard to TWRP .

(sovled)Bootloop after installing custom rom in TWRP in Z00LD HELP!!!

i had installed custom rom and recovery(lineage 14.1 & twrp)
it was working fine until the lineage updater downloaded an update and asked me to install it.
but i didnt read the instructions properly and now every time i reboot my Z00ld it gets stuck in a bootloop
how can i get out of the loop.
here are few things ive tried already:
i had a backup after installing the custom rom (the 1st time), the backup didnt work.
so i wiped the whole OS and tried to install the rom again. it completes the installation process without any errors but after completing, it just boots back to the TWRP recovery.
How am i supposed to get out of this loop.
(this happened only after the updater downloaded an update and tried to install it. )
hi guys i need urgent help here please!!
i had installed custom rom and recovery(lineage 14.1 & twrp)
it was working fine until the lineage updater downloaded an update and asked me to install it.
but i didnt read the instructions properly and now every time i reboot my Z00ld it gets stuck in a bootloop
how can i get out of the loop.
here are few things ive tried already:
i had a backup after installing the custom rom (the 1st time), the backup didnt work.
so i wiped the whole OS and tried to install the rom again. it completes the installation process without any errors but after completing, it just boots back to the TWRP recovery.
How am i supposed to get out of this loop.
(this happened only after the updater downloaded an update and tried to install it. )[/QUOTE]
Update : i just had to install stock rom and reinstall the custom rom
hemanthevil said:
hi guys i need urgent help here please!!
i had installed custom rom and recovery(lineage 14.1 & twrp)
Click to expand...
Click to collapse
Lineage seems to be no more available for Z00LD. I'm trying to install any custom roms on my Z00LD (I'm new on rooting and/or installing new roms) but I am not sure about which one is available for that model. Could anyone help me please? Thanks.
Regards.

Categories

Resources