Related
Okay, so I used to love rooting my phones, but I mostly dealt with flagship phones in the US which made rooting and flashing a cakewalk. I understand some of the nitty gritty, so when I got my first phone in Japan, I was super excited about rooting it. But after reading this forum for hours, I have so many questions...my phone build is A2017G JPV1.1.0B03.
I read this but this mostly focused on using an update on this phone.
https://forum.xda-developers.com/axon-7/help/a2017g-japan-to-a2017g-european-a2017g-t3608411
1. If that thread is correct, that means I technically just have the European version of the phone with Japanese modems installed. Is that correct?
2. Also, does that mean (if I were not to root the phone) I would need to install a European Axon 7 Oreo update for it to actually work on the phone? Would the US version fail?
3. I can't seem to find the modem for my phone. I can upload some screenshots later but can someone clarify if I'm right that it's a "B03" or am I looking at the wrong information?
4. There is no Oreo release for Japan, so does that mean I can't flash an Oreo ROM because there won't be any modems for this?
That's all for now, but I'm sure I have a lot of follow-up questions to your answers. Your help is greatly appreciated.
Unlock bootloader, install twrp, instal "G" model bootstack, instal any custom rom, then flash "G" modem in twrp, reboot. No matter where you device are from, the model matters. If its "G", its a european version and its only what you need to know. If you want stock oreo and didnt recieve through OTA, download the update in ZTE website for your "G" version, put it in a sdcard then reboot your phone to recovey then select "install update from sd card" option.
Basically, the model of the phone is printed on the back of it down the bottom.
A2017 is China version.
A2017U is US version.
A2017G is everything else (Global) version. It's not actually euro.
The modem software has to be for the actual model of the phone, not your location in the world.
Don't correlate software versions between Chinese, US and Global, they use different numbering systems. Only concentrate on what is for your model.
The rest of this pertains to A2017G as that is what you seem to have.
They start at B01 (usually pre-release beta) and go up from there but each new Android version eg Nougat, Oreo etc means the numbers restart from B01.
Nougat B03 has nothing to do with Oreo B03.
Look at the software version, A2017GV1.1.0 is very old, the 1.1.0 is the key to the Android version. 1.2.0 is Nougat, 1.3.0 is Oreo so you have Marshmallow at 1.1.0 and B03 release from that Android generation.
It seems confusing at first but it's actually quite simple.
RobboW said:
Basically, the model of the phone is printed on the back of it down the bottom.
A2017 is China version.
A2017U is US version.
A2017G is everything else (Global) version. It's not actually euro.
The modem software has to be for the actual model of the phone, not your location in the world.
Don't correlate software versions between Chinese, US and Global, they use different numbering systems. Only concentrate on what is for your model.
The rest of this pertains to A2017G as that is what you seem to have.
They start at B01 (usually pre-release beta) and go up from there but each new Android version eg Nougat, Oreo etc means the numbers restart from B01.
Nougat B03 has nothing to do with Oreo B03.
Look at the software version, A2017GV1.1.0 is very old, the 1.1.0 is the key to the Android version. 1.2.0 is Nougat, 1.3.0 is Oreo so you have Marshmallow at 1.1.0 and B03 release from that Android generation.
It seems confusing at first but it's actually quite simple.
Click to expand...
Click to collapse
I'm so used to dealing with multiple modems for the same model of phone in the US (between the major carriers and stuff) that I was overthinking it.
Thanks a ton. That simplifies things so much...and also makes me wonder why updating never occurred for the Japanese release. It's not like there isn't language support for newer versions of Android, but maybe not for the MIUI? I need to be more careful choosing my next phone then, though probably it should be an AOSP phone like the Zenfone or Pixel.
Guess I have my work cut out for me this weekend. Time to run a giant backup and start rooting. Thanks again for all your help. I like this phone (though I often accidentally hover/touch the home button when typing, and I hope there's a sensitivity fix for that :laugh so I want it to last for a while before I get my next one.
It's still a good phone, I look at new phones and think, hmmm, nice, but what will I gain on a daily basis? Nothing more to be honest. The A7 has enough power for me still. The one thing I could really use would be a higher capacity battery. Was looking at Huawei phones but now, well.....
For updates, they had issues with OTA and reverted to only releasing for a whole ROM download for update from SD card.
I personally won't apply an OTA for mine even now at Oreo. Must be a whole ROM to flash with the updater. That's all I've done with it since purchase and it works great still. A lot of people seem to have all sorts of weird issues after applying OTA updates.
Sweet. As someone with some experience with this stuff, do you have any tips or tricks I should know moving forward? I'm going to try rooting it tonight.
-EDIT: Quick little question, my phone says the Android version is 7.1.1 but that would be Nougat, right? Or is it actually Marshmellow?
7.1.1 yeah, Nougat. That doesn't make sense from your first post.
Was it used when you got it or new? Have you checked the model from what's on the back of it, not what software says it is?
I keep mine stock, can't advise on rooting etc. I use it with personal and work SIMs and it has to pass requirements including encryption to run Microsoft InTune and our company portal and use it in work mode. Bootloader hasn't even been unlocked. The most I did was uninstall some built in user apps through ADB.
I also have a 2017G bought in Japan. I unlocked it and worked on it based on this forum, and I can say that it behaves as any other 2017G. I am not interested to use the stock ROM, but yes, I remember that it was on Nougat version when I received it.
I have the A2017 (china). As above, update your phone to the region. As a result of having a china variant, i think i miss out on band 28 and some other essential bands for reception. I get 3G/low 4G connections and a lot of bad reception areas (countryside living). Its no problem.
Currently running AEX 6.5. Search some of my recent posts for how I updated to this version.
darth_antz said:
I have the A2017 (china). As above, update your phone to the region. As a result of having a china variant, i think i miss out on band 28 and some other essential bands for reception. I get 3G/low 4G connections and a lot of bad reception areas (countryside living). Its no problem.
Currently running AEX 6.5. Search some of my recent posts for how I updated to this version.
Click to expand...
Click to collapse
Appreciate it. I will try to work on it this weekend, as last weekend I just didn't have the time...
The phone was brand new when i bought it. It was on a "super sale" though, going for 12,000 yen (like 110 bucks or so). I was thinking about getting a Zenfone but if I could save the money and make it to at least Oreo I'd be happy. Been having issues with the battery whenever I use more than 2 apps at a time.
If you could link an unlocking guide and a ROM that worked well for you that would be great. I have one I plan to use but I'm always open to suggestions. After the first time, I'll feel more comfortable with it. In the worst case scenario that I brick this thing I'll just buy the Zenfone early :laugh:
The Zenphone 6 is looking a viable buy now.
My Axon 7 is still good so not really looking but I did just get a new Axon 7 Mini for use as a media player. It still has AMOLED screen, stereo speakers, headphone jack, DAC for the jack etc. No hi res bluetooth though. Cost me AU$149 new in box from retail store. Bargain! How much is a dedicated music player which is crap at movies or just cant do them?
Chucked my 128Gb SD in. Sounds good playing through the car hifi, lower 3.5 jack output matches HU aux in impedance better than Axon 7 which can overload the input at high volume. Very balanced and clean sound.
TheZen said:
Appreciate it. I will try to work on it this weekend, as last weekend I just didn't have the time...
The phone was brand new when i bought it. It was on a "super sale" though, going for 12,000 yen (like 110 bucks or so). I was thinking about getting a Zenfone but if I could save the money and make it to at least Oreo I'd be happy. Been having issues with the battery whenever I use more than 2 apps at a time.
If you could link an unlocking guide and a ROM that worked well for you that would be great. I have one I plan to use but I'm always open to suggestions. After the first time, I'll feel more comfortable with it. In the worst case scenario that I brick this thing I'll just buy the Zenfone early :laugh:
Click to expand...
Click to collapse
Where did you get in on a super sale? website in Japan?
Obvious unlocking guide is this one https://forum.xda-developers.com/axon-7/how-to/guide-axon-7-custom-oreo-roms-newbies-t3786693
Give yourself 2 hours to get the job done, and there are a few guides on youtube for unlocking the bootloader and installing TWRP (if you havent already).
If you cannot root the phone by your own discovery, I dont think you'll be up for installing a custom rom. It takes a degree of risk, and research. Being successful in the attempt is worth it.
Do a backup in TWRP, or get titanium backup pro (paid) to do a backup of your essential apps and data (email, messaging, google authenticator etc). I think titanium backup is better, especially if you are going from android 7 to 8 or 9 and different twrp versions.
If your phone boots following Oki's guide (Option 1), then scroll to the last page to my post about taking it to android 9 on AEX.
As your phone is A2017G, search for the necessary files in the forum corresponding to your modem. There are plenty of links.
Good luck and let us know you are successul!
darth_antz said:
Where did you get in on a super sale? website in Japan?
Obvious unlocking guide is this one https://forum.xda-developers.com/axon-7/how-to/guide-axon-7-custom-oreo-roms-newbies-t3786693
Give yourself 2 hours to get the job done, and there are a few guides on youtube for unlocking the bootloader and installing TWRP (if you havent already).
If you cannot root the phone by your own discovery, I dont think you'll be up for installing a custom rom. It takes a degree of risk, and research. Being successful in the attempt is worth it.
Do a backup in TWRP, or get titanium backup pro (paid) to do a backup of your essential apps and data (email, messaging, google authenticator etc). I think titanium backup is better, especially if you are going from android 7 to 8 or 9 and different twrp versions.
If your phone boots following Oki's guide (Option 1), then scroll to the last page to my post about taking it to android 9 on AEX.
As your phone is A2017G, search for the necessary files in the forum corresponding to your modem. There are plenty of links.
Good luck and let us know you are successul!
Click to expand...
Click to collapse
I bought it at Rakuten Mobile. There was a super sale and it was like 80% off, lol.
I tried using the guide over the last couple of days and no matter what I've done, I can't seem to get to recovery after doing the flashing (step 9). I was able to flash a stock image back on, but then when I try again it's the same results. I'm at a loss as to why but...there's another guide using the Axon7Tool.
https://forum.xda-developers.com/axon-7/how-to/guide-install-twrp-unlock-bl-flash-t3517379
The downside is that I work two jobs tomorrow so I won't have time to try this new one out but I think I downloaded everything already. This is kinda frustrating though..
-EDIT: I used the unbricking guide to EDL flash the B10 Nougat and it is a different experience than what I had before...geez, seems the Japanese version was severely neglected. If I run into problems with the other guide I feel comfortable EDL flashing Oreo. Really appreciate the support guys, let me know what you think. Before I started this, my battery was lasting barely 8 hours with only LINE and Chrome being the main background apps...
Not sure it's relevant here any more but I have a 128 Gb A2017 which I put a G build on, after being a bit miffed at some of the stuff (mostly Google based) I couldn't use on the original. I really don't know that much about what I'm doing but it all seems to work OK, though an old battery life problem has returned so I'm going to be asking elsewhere (probably) about how to replace the modem software. I also have a bit of a problem with GPS intermittently not working (going on and offline) but I suspect that's probably a hardware problem rather than the build. Mine is on
GeoffUK said:
Not sure it's relevant here any more but I have a 128 Gb A2017 which I put a G build on, after being a bit miffed at some of the stuff (mostly Google based) I couldn't use on the original. I really don't know that much about what I'm doing but it all seems to work OK, though an old battery life problem has returned so I'm going to be asking elsewhere (probably) about how to replace the modem software. I also have a bit of a problem with GPS intermittently not working (going on and offline) but I suspect that's probably a hardware problem rather than the build. Mine is on
Click to expand...
Click to collapse
you can't. There are 3 modem variants by region (US, china, global) and many versions for each, but they are not interchangeable and flashing another has already wiped some IMEIs long ago (doesn't always happen though)
Hi,
My main phone just bricked, and I have an S7 Edge from ATT (model 935A) on standby. However, my old phone was running 8.1 Oreo, so all my google backups require 8.1 or higher in order to restore. Alas, the highest the 935A upgrades go is 8.0, and from what I can tell they will not upgrade it to 8.1 or 9.0.
Thus, I started looking at rooting and installing 8.1 myself. Lineage or really anything that is stable and usefull. However, apparently using that 935A ATT model prevents a lot of my potential options.
Does anyone have an idea how I could do this? Seems like an option might be to flash a 935U firmware and try going from there? Or is there some different way to get my google info restored onto the 'new' phone?
Many thanks
Chris
I just bought an unlocked AT&T phone. I don't care about security updates. I do like performance improvements and certain changes when moving to a new operating system though. However I am not willing to make those changes if I sacrifice stability.
Should I switch my AT&T rom to U.S unlocked? Is the gains worth it? Do I gain anything other then "Android 9 pie" in the settings? How is performance?
Will I get OTA updates after that or will I still need to use LGUP?
Thank you
Edit: I think I answered my own question. The ability to use HDMI out is not available until after the December 2018 update. My phone is stuck in November.
Also, unless you're an AT&T customer there's no reason to want or keep AT&T firmware.
Curious-Octopus said:
I just bought an unlocked AT&T phone. I don't care about security updates. I do like performance improvements and certain changes when moving to a new operating system though. However I am not willing to make those changes if I sacrifice stability.
Should I switch my AT&T rom to U.S unlocked? Is the gains worth it? Do I gain anything other then "Android 9 pie" in the settings? How is performance?
Will I get OTA updates after that or will I still need to use LGUP?
Thank you
Edit: I think I answered my own question. The ability to use HDMI out is not available until after the December 2018 update. My phone is stuck in November.
Click to expand...
Click to collapse
ChazzMatt said:
Also, unless you're an AT&T customer there's no reason to want or keep AT&T firmware.
Click to expand...
Click to collapse
Would only flashing and no root/bootloader unlock allow me to keep the serial and imei in the phone? Or should I make alot of backups of files?
Curious-Octopus said:
Would only flashing and no root/bootloader unlock allow me to keep the serial and imei in the phone? Or should I make alot of backups of files?
Click to expand...
Click to collapse
Let's take one topic at a time.
Using Dev Patched LGUP to flash to NAO firmware for your carrier unlocked phone only gets rid of the AT&T bloat and allows you to update firmware while keeping AT&T firmware does not.
Nothing about that conversion touches serial or IMEI.
_____
Unlocking the Bootloader and rooting is a more advanced process which is harder. But that also normally shouldn't affect serial or IMEI. If you do lose serial or IMEI there's a method posted to write them back, I believe.
ChazzMatt said:
Let's take one topic at a time.
Using Dev Patched LGUP to flash to NAO firmware for your carrier unlocked phone only gets rid of the AT&T bloat and allows you to update firmware while keeping AT&T firmware does not.
Nothing about that conversion touches serial or IMEI.
_____
Unlocking the Bootloader and rooting is a more advanced process which is harder. But that also normally shouldn't affect serial or IMEI. If you do lose serial or IMEI there's a method posted to write them back, I believe.
Click to expand...
Click to collapse
Thank you!
I am new to all of this, but I have experience in computer so I am confident about my ability to do it.
With the talk of Android 10 available via OTA update on AT&T only, it might make sense for ppl who want Android 10 to stick with AT&T firmware because if you cross-flash there is no going back. Android 10 for other carriers is not out yet so if you cross-flash, you're stuck with Pie.
Sorry, nevermind, seems its coming out for all soon.
Android# said:
With the talk of Android 10 available via OTA update on AT&T only, it might make sense for ppl who want Android 10 to stick with AT&T firmware because if you cross-flash there is no going back. Android 10 for other carriers is not out yet so if you cross-flash, you're stuck with Pie.
Sorry, nevermind, seems its coming out for all soon.
Click to expand...
Click to collapse
For V35 on AT&T firmware, you won't get the OTA AT&T update unless you're an AT&T customer. Or AT&T MVNO Red Pocket customer.
Whereas you can flash to NAO Android 10 firmware when that is released via KDZ.
People, don't get hysterical like you did with the Pie update. All variants will get Android 10. All but AT&T will have full image KDZ which you can download and install.
NAO KDZ will be the best choice for those who are not Google Fi customer or AT&T customer.
Don't go trying to flash Korean carrier firmware like some did for Pie. Just be patient.
Stupid question... i bought one chep last year of course AT&T and i paid the unlock code, of course it came with Oreo and as later i found it couldn't get Pie. So i flashed it to the unlocked version, but as someone in other thread it seems that the firmware "official" has just been on Oreo, mine seems has security update of June and it has been updated this month with another security update...
Mine seems to work normally, however i could say it has three main flaws, first and most annoying for me is that do not disturb doesn't work properly even with rules established, only way to get it working is setting the alarm, which is a bit annoying considering that as for this virus situation i am not working since 2 months ago, and of course i don't want to get disturbed after 10:00 pm and also very early in the morning...
And second one is the signal which is worst than my previous V30+ converted to US998, funny because with other of my old phones as Z2 Force, Iphone 7 and of course US998 i could get easily 30MB+ at average using same SIM card and in the same area for more than two years, but since i have this V35 i can barely get 2MB at average and max 38MB, and max with the other ones mentioned i could get 45MB and in one time i got 60MB
And i don't know if mine has a weird battery but it can barely get around 15-16 hours of normal use.
Should i flash again to AT&T, flash the latest Pie with security update or just wait for the KDZ of Android 10?
And is that true that it now can be rooted?
This thread is widening in scope to the pros and cons of the various vendor roms and android levels. There are a couple of points to add toward that end. To my knowledge, all v35's on any existing rom can be rooted including the AT&T model. The difficulty with AT&T phones is that kdz's aren't released. You need to make your own backup before flashing to another rom if you want to return to AT&T firmware from say GFI/NA.
The next is about Oreo, at least the "h" NA/GFI build. Hotspot and tethering is broken. It may work once or twice after first setup, but it will stop working. That is a deal breaker for some. Everything (that matters to me) seems to work on Pie.
It will be interesting to hear reports on Android 10 on v35. Before taking the leap, it is important to know that ARB remains 0. An ARB change could lock you to Android 10. I don't recall reading about ARB changes on flagship LG phones in the past several years. Regardless, ARB or back-flashing is not yet reported and I do not know if qfil can overcome an ARB change. My suggestion is to be patient and watch for A10 v35 updates from the skilled, brave and sometimes foolhardy here on xda or tg.
tonochito said:
Stupid question... i bought one chep last year of course AT&T and i paid the unlock code, of course it came with Oreo and as later i found it couldn't get Pie. So i flashed it to the unlocked version, but as someone in other thread it seems that the firmware "official" has just been on Oreo, mine seems has security update of June and it has been updated this month with another security update...
Mine seems to work normally, however i could say it has three main flaws, first and most annoying for me is that do not disturb doesn't work properly even with rules established, only way to get it working is setting the alarm, which is a bit annoying considering that as for this virus situation i am not working since 2 months ago, and of course i don't want to get disturbed after 10:00 pm and also very early in the morning...
And second one is the signal which is worst than my previous V30+ converted to US998, funny because with other of my old phones as Z2 Force, Iphone 7 and of course US998 i could get easily 30MB+ at average using same SIM card and in the same area for more than two years, but since i have this V35 i can barely get 2MB at average and max 38MB, and max with the other ones mentioned i could get 45MB and in one time i got 60MB
And i don't know if mine has a weird battery but it can barely get around 15-16 hours of normal use.
Should i flash again to AT&T, flash the latest Pie with security update or just wait for the KDZ of Android 10?
And is that true that it now can be rooted?
Click to expand...
Click to collapse
cmrntnnr said:
This thread is widening in scope to the pros and cons of the various vendor roms and android levels. There are a couple of points to add toward that end. To my knowledge, all v35's on any existing rom can be rooted including the AT&T model. The difficulty with AT&T phones is that kdz's aren't released. You need to make your own backup before flashing to another rom if you want to return to AT&T firmware from say GFI/NA.
The next is about Oreo, at least the "h" NA/GFI build. Hotspot and tethering is broken. It may work once or twice after first setup, but it will stop working. That is a deal breaker for some. Everything (that matters to me) seems to work on Pie.
It will be interesting to hear reports on Android 10 on v35. Before taking the leap, it is important to know that ARB remains 0. An ARB change could lock you to Android 10. I don't recall reading about ARB changes on flagship LG phones in the past several years. Regardless, ARB or back-flashing is not yet reported and I do not know if qfil can overcome an ARB change. My suggestion is to be patient and watch for A10 v35 updates from the skilled, brave and sometimes foolhardy here on xda or tg.
Click to expand...
Click to collapse
Well my teher works, the phone itself has been good for the amount i paid $100, however those bugs or may be wrong flash? affects me a bit... i guess i should be patient and wait for the kdz.
Can anybody confirm this?
https://piunikaweb.com/2020/06/09/lg-v35-thinq-android-10-lg-ux-9-0-update-rolling-out/
Says that LG G7 Android 10 can be flashed to the V35...
tonochito said:
Can anybody confirm this?
https://piunikaweb.com/2020/06/09/lg-v35-thinq-android-10-lg-ux-9-0-update-rolling-out/
Says that LG G7 Android 10 can be flashed to the V35...
Click to expand...
Click to collapse
NO, that article doesn't say that. It doesn't mention LG G7 whatsoever at all. Seriously. You are just making stuff up?
Confirm what? That you can cross flash to Korean carrier V35 firmware to other V35 against our advice? Why would you want to do that? Just be patient!
Here's my reply from earlier in the thread. Please read it this time.
ChazzMatt said:
For V35 on AT&T firmware, you won't get the OTA AT&T update unless you're an AT&T customer. Or AT&T MVNO Red Pocket customer.
Whereas you can flash to NAO Android 10 firmware when that is released via KDZ.
People, don't get hysterical like you did with the Pie update. All variants will get Android 10. All but AT&T will have full image KDZ which you can download and install.
NAO KDZ will be the best choice for those who are not Google Fi customer or AT&T customer.
Don't go trying to flash Korean carrier firmware like some did for Pie. Just be patient.
Click to expand...
Click to collapse
ChazzMatt said:
NO, that article doesn't say that. It doesn't mention LG G7 whatsoever at all. Seriously. You are just making stuff up?
Confirm what? That you can cross flash to Korean carrier V35 firmware to other V35 against our advice? Why would you want to do that? Just be patient!
Here's my reply from earlier in the thread. Please read it this time.
Click to expand...
Click to collapse
i know but is kinda weird that even that article links to Reddit and some people on the video saying they flashed "successfully" their v35...
tonochito said:
i know but is kinda weird that even that article links to Reddit and some people on the video saying they flashed "successfully" their v35...
Click to expand...
Click to collapse
Yet again, we went all through this a year ago with Pie.
You can flash it "successfully" but you wipe all data, some of the menus are in Korean... Then a month or so later every other variant gets a KDZ (EXCEPT for AT&T). So then people have flash again to what they REALLY want -- which is a North American Open (NAO) carrier unlocked variant firmware. AND they lose data again and risk messing up their phone by cross flashing entirely different region yet again.
There's no need to do it. JUST WAIT. FLASH to NAO firmware when Android 10 is released for that variant.
If you're already on NAO firmware now, then when Android 10 is released for that variant, it would be simple "Upgrade" in Dev Patched LGUP (keep your data). If you're not yet, then it would be Partition DL or Refurbish mode to cross flash to NAO at that time. You would lose your data only once.
The people who are impatient are NOT going to stay on Korean carrier firmware long term. They will cross flash yet again to NAO when it comes out, because it's more desirable. They will be unhappy with the Korean carrier firmware. Many will mess up their phones. Don't be one those people!
Look it's your phone. Do what you want. But weeks ago I predicted this would happen and have cautioned people to not make the same mistakes again that were made last year during Pie rollout.
I just installed the korean ROM and it works... kinda good there are some minor bugs that may bother you if you pay too much attention or that are a bit annoying i am going to put here:
As soon you reboot your phone it is going to give you some warning about well some codes and stuff, i guess because the hardware is not the same?
Menu is in korean at set up but you can change it to your language
There are 3 apps that are in korean and you can't uninstall it, specially Q voice that is on korean language not working
LG Smart World does not work, but anyway i never used it, also Quick Help but it never worked on Pie too so its irrelevant
There is one app called DMB which does not work, don't know what it does but it just freeze when i try to open it
Some weird bug with the battery? It doesn't show up the estimated remaining battery, it just keep on calculating data
For some reason i haven't been able to find or change the data configuration, you know change LTE, 3G or 2G. Seems like it is on auto mode which is kinda annoying for me.
The only drawback i could say for me its dual apps... is not that easy as on Pie
And for some reason it fixed in my case the annoying but it had about do not disturb, which only worked when an alarm was set, but if there wasn't alarm it never worked
Seems the "AI" camera has been improved or fixed because when i selected AI cam it just never do anything relevant compared with my old V30+, now it recognize stuff such person and so on
Although i love stock music player i just hate the annoying purple tone with it, now it changes depending on the setup of the midnight menu. I think that on a rooted v30+ it could be changed but i am not interested on root it and doubt being on Android 10 could be rooted. But it has integraded FM app radio which i regulary use but being the american version of course it has been removed, so it has to be installed manually
What i like its that now it has integrated viedo screen recorder so good bye third party apps, which in my case i really don't like you know if you don't pay you have adds and stuff related.
But the drag menu is with a bug? i don't know how to explain it but it just goes with the hour and date long... instead of just taking a portion of the screen
I just did it and didn't wait because my v35 is broken so i need to change or leave it as secondary phone, around 20 days ago the fingerprint begun to be erratic and was hit or miss trying to unlock it, i have tried cleaning it but it worked as i mentioned on hit or miss. Right now seems i can't configure it. No idea why it just became erratic. And there was a little crack on top of the screen and it seems it got wet under the screen with a white spot, so i guess it is going to be progressively worst with time. Even i tried the old trick of putting on a zip bag but after i left it for the night, when i opened it in the morning it was just wet...
My only question could be if this can be flashed to the North America firmware...
tonochito said:
My only question could be if this can be flashed to the North America firmware...
Click to expand...
Click to collapse
People who flashed to Korean Pie last year were able to flash to North American Open (NAO) Pie when that was released a month or two later.
For most people, cross flashing from AT&T to NAO first and then waiting for Pie would (using Dev Patched LGUP Upgrade mode) have been the better decision. Instead of cross flashing twice -- to Korean, then again to NAO -- to different variant firmware. NAO was what they really wanted in the first place.
OR if already on NAO, just be patient. Android 10 is coming.
ChazzMatt said:
People who flashed to Korean Pie last year were able to flash to North American Open (NAO) Pie when that was released a month or two later.
For most people, cross flashing from AT&T to NAO first and then waiting for Pie would (using Dev Patched LGUP Upgrade mode) have been the better decision. Instead of cross flashing twice -- to Korean, then again to NAO -- to different variant firmware. NAO was what they really wanted in the first place.
OR if already on NAO, just be patient. Android 10 is coming.
Click to expand...
Click to collapse
Well it seems that when NAO kdz will be available i will have the G8, as for me the fingerprint stuff drives me nuts right now that is not working lol, it has been a fantastic phone just well i guess it's time to move on. At least is good that can be flashed to NAO easily and with no problems like other brands out there.
Hello everyone,
I cross-flashed Android 10 on my v35 following this guide everything went as expected.
* I restored my backup from original Android 9 without any problems.
* Overall the phone feels faster, the camera experience is better(not sure that it has any benefits in the quality), unfortunately we cannot change lens during video
* The gCam 6.2 that I was using and was previously kinda stable now cannot save the picture, installed a 5.2 version that was stable in G6 -> v30 and v35 and I will be using this one until the problems with 6.x or 7.x are resolved.
* There are some korean apps that can be hidden but it they do not create any problems.
* Gestures are exactly what I needed and far better than FNG (apart from the customization options that are completely missing)
* Battery is also considerably better, but must be tested in time.
Hello to everyone!
Recently i bought an unlocked AT&T LG V35 which i am using it in Europe without any issue.
I want to cross-flash it in NA ULM kdz cause i don't want the AT&T firmware,but after a lot of reading here and there about the way i have to flash,i am a little bit confused,so i have some questions in order to go on.
My phone came with Pie version AWM20c and security patch level July 1,2019.
1)Which version of NA kdz should i download from LG firmwares site?
I see 4 versions..AIO,GFI,AMZ and USA..Maybe the latter is the most suitable?
2)Should i first crossflash it to Oreo NAO firmware and after update to Pie,(like used to do with LG V30 US998 that we must first install Nougat),or going straight away to NAO Pie?
3)The method of crossflashing is the same like LG V30 from other carriers to US998,as it is in Frankenstein thread?
4)Which of 2 methods between Refurbish and Partition DL is better for my case?
I want a completely clean kdz install,because a weird fact happens to my storage capacity in System,which has 16GB of storage used,and i suppose that all this used capacity,is because of AT&T bloated firmware,in addition to my 2 LG V30's,one is AT&T unlocked and the other is open EU 930,that both have about 10 GB used storage from system.
Thank you all in advance for your answers.
Succesfully crossflashed ULM firmware NAO USA 20f,android 9,security patch level February 1,2020.
Previous software version was android 9,AWM20c,security patch level July 1,2019.
I followed the same procedure of Frankenstein LG V30,V30+.
I used the Partition DL mode to flash and everything went fine..just in the end of the process and after the phone rebooted for first time,i got a notification referring the below:
"Decryption unsuccessful
The password you entered is correct,but unfortunately your data is corrupt.
To resume using your phone,you need to perform a factory reset.When you set up your phone after the reset,you"ll have an opportunity to restore any data that was backed up to your Google Account.
Reset phone"
I don't know if this notification is something bad,but all looked normal after the reset.
No issues till now,no AT&T bloatware,LG logo when powering on,instead of AT&T logo.
As others mentioned,the software version form,remains AWM,instead of ULM.
The previous version from AT&T was AWM20c,now it is AWM20f despite the fact that i have ULM firmware.
I hope my infos can help others in future.
Of course a big thank you goes to everyone here that contributes with their knowledge,making all these useful guides.
Hi, first post here. Installed TWRP and upgraded my wifes phone to LineageOS 16. Most things are working well, but the menu key is constantly activating without a key press. I'm a networking guy by trade and phone fiddling not really my strong point. My Google Fu always seems to fail me in situations like this too.
Any ideas? There's also an issue with Bluetooth which constantly crashes if used. Do I need to raise a new thread for that?
The phone itself is a UK version, so that's also a bit confusing when there's builds offered for AT&T, Sprint, Verizon etc. Also I've not upgraded further past this nightly build. Should I try this? Am I right in that the process should be to wipe only system partition then apply the upgrade?
Cheers.
Oh if you need me to post any further details about phone or whatever just shout and I'll get on it.
Reads as you may have installed for the wrong phone model .
I don't think so. The options presented to me over at download.lineageos.org were;
Galaxy Note 3 LTE (N9005/P) hlte
Galaxy Note 3 LTE (N9008V) hltechn
Galaxy Note 3 LTE (N900K/L/S) hltekor
Galaxy Note 3 LTE (N900T/V/W8) hltetmo
The phone model number is SM-N9005 and so the specific image I installed, after a full backup and full wipe is;
lineage-16.0-20200905-nightly-hlte-signed.zip
Non xda rom suggest you go back to the source .
Is there another rom that anyone could recommend?
So back when I got my phone in Feb 2020, I did what most people do when they have a new device, update it. After some googling, I found plenty of threads about how great the google version of Android 9 is for the v35. Removing the ATT bloatware was my main reason for flashing to it.
I've read on a few different websites that if you flashed to the stock google android 9 rom, that there is no way to flash back to the ATT roms, or upgrade to the current android 10 att rom. My phone is unlocked and is of course, the ATT version.
Model: LM-V350AWM (doesn't show that it's google I guess)
Hardware: Rev 1.0
I have not bought an ATT sim card or gotten there service to upgrade because of what I read. Is it possible to flash back to stock ATT ROMs or to OTA with an ATT sim if I flashed to the google version? Anyway to go back (stock 8.0 even)? I really don't want to switch to a new phone since I got this baby for 190$ and finding something equally good or better in this price range is not happening. I'd appreciate any information you guys have on this.
Thanks!
It isn't clear from your note what you want to do. If your objective is to get to A10, I highly recommend following cloud's guide to localize the Korean A10 rom. That would require unlocking the bootloader. Everything on that rom works at least for me and my use cases. Browse around here in the v35 forums and you'll find the threads you need.
If your aim is simply stock A10 with ATT, there is one option. Someone posted a partition dump. You could try writing partitions one-by-one usind qfil. I haven't seem any reports of anyone doing that....
Okay. So is it confirmed that if you flashed the stock Google Fi Android 9 onto your att phone that you can't flash back to atts? Different partition sizes end up bricking the phone? I can't find any att kdz anyway. Not even the older android 8. I know att $oesnt release theirs but plenty of folks normally upload their stock kdz for the community.
Really confused with how dead the LG V30/35 community has been since day 1. I remember when I was learning how to root my viewsonic g tablet and galaxy 3 (2011-12) the forums were bursting with people and stock kdz loaded everywhere. And 30 different roms were being worked on for one device. I think the galaxy S5 community is still more active than this one. Smh
Thank you for the reply. I'll look for the post you mentioned. I haven't worked or played around with modifying android in 10 years. Only thing I've done is a quick flash of googlefi kdz back in 2020 which was brainless. Just looking at the tutorials to root this phone seems daunting now lol.
Jebsauce said:
Okay. So is it confirmed that if you flashed the stock Google Fi Android 9 onto your att phone that you can't flash back to atts? Different partition sizes end up bricking the phone? I can't find any att kdz anyway. Not even the older android 8. I know att $oesnt release theirs but plenty of folks normally upload their stock kdz for the community.
Really confused with how dead the LG V30/35 community has been since day 1. I remember when I was learning how to root my viewsonic g tablet and galaxy 3 (2011-12) the forums were bursting with people and stock kdz loaded everywhere. And 30 different roms were being worked on for one device. I think the galaxy S5 community is still more active than this one. Smh
Thank you for the reply. I'll look for the post you mentioned. I haven't worked or played around with modifying android in 10 years. Only thing I've done is a quick flash of googlefi kdz back in 2020 which was brainless. Just looking at the tutorials to root this phone seems daunting now lol.
Click to expand...
Click to collapse
AT&T does not release kdz. Don't know why you think that needs to be confirmed. Partitions for AT&T A10 have been dumped. You can write them one by one by qfil.
As to why V30/V35 development is dead, a huge factor is that lg exited the mobile phone market. LG, despite making good hardware, was also not developer friendly. The V35 is 4 years old.
As for rooting a V35, just follow the instructions if that's what you want or move to newer models with 5G, more memory, and greater battery capacity.
I am still rocking my V35 Fi phone happily.
cmrntnnr said:
AT&T does not release kdz. Don't know why you think that needs to be confirmed. Partitions for AT&T A10 have been dumped. You can write them one by one by qfil.
As to why V30/V35 development is dead, a huge factor is that lg exited the mobile phone market. LG, despite making good hardware, was also not developer friendly. The V35 is 4 years old.
As for rooting a V35, just follow the instructions if that's what you want or move to newer models with 5G, more memory, and greater battery capacity.
I am still rocking my V35 Fi phone happily.
Click to expand...
Click to collapse
I thought people who were more tech savvy than me could pull a stock KDZ off their own ATT phone. That's what people did in the past anyway (I believe).
The phone is still great and I'm glad you are happy with it. I just wanted android 10 on my phone. Stock. English. I might try the Korean route since I'm less likely to brick my phone. Who knows, we'll find out. Thanks for the replys.
The localized A10 Korean rom has been fantastic for me. Everything works.
Make sure you backup ftm and efs partitions before starting. You will lose the S/N but it is easily restored. If you are in US, I suggest you flash the localized OP partition. Links are in the localization thread started by cloud.