Good morning, the problem begins when I install the twrp never enters and only restarts the cell here I leave a photo of what appears in the logo .. any solution for this ...
THIS IS WHAT IT SAYS
Your device software cannon be checked for corruption
lock de bootloader
PD:will not let me put pictures
I suggest reading the tutorial more, the answer is there.
Related
hi there
i bought an lg g2 d802 32gb , whene I checed its imei it said that it is a d800 model
in the first time the phone start crashing from itself , without doing or installing anything
then i update it to 5.0.2 when the screen start acting crazy ( whene i try to click a button the click goes somewhere else on the screen like whene i hit home button it open the menu etc ...)
than i thought its because of the update and i tried to go back to 4.4.2 , and that whene the phone wont boot to download mode and goes to qhsusb_bulk(qualcomm 9006) mode instead
, i tried to flash image files with the d802 images but they didnt work , than i tried the d800 file and oops it did work and i flashed 4.4.2 but the screen still crasy and a new problems came out
like sim is not readable and it consume battery life very quick (a full battery doesnt last a day in standbay ), and the size became 16gb instead of 32
I couldnt find any solution for my probleme , please help
no one knows a solution ?
I know that I may have to reflash partitions but I dont know how, but think that d802 partitions wont work , and d800 causes a lot of issues , any ideas ?
did you find a solution?
having the same problem for three weeks. After flashing a new rom the screen has gone crazy. Cannot use recovery mode because the screen has its own life....
Downloadin any KDZ file I have found using download mode doesnt help. The screen is still crazy.
Solution ??
First step, get an otg cable and connect your mouse. Second of you're rooted, then be ready to download a reboot app from the play store and reboot to TWRP.
From there backup everything and then reflash a rom.
See if that fixes your problem
Yesterday my lg was working just fine. Before i went to sleep i locked my phone at the time battery was lower than 5% perhaps while i was sleeping some important update started but because it was such low battery the update got interrupted when phone lost all the battery. When i woke up i started charging my phone. After a while i tried turning my phone on but it was stuck in boot loop.
Tried phone factory reset but that did not work it got me to the lg welcome screen with language selection option but pressing next does nothing. I noticed that downloading mode still works on phone so maybe something can be made there saw this guide https://forum.xda-developers.com/d290n/how-to/guide-reflashing-stock-rom-d290-d295-t3142456 but i am stuck on step 3 Download a KDZ firmware file that site has adfly links and many links there i tried dont work.
What should i try to do to fix my lg and where can i get lg l fino d290n kdz file?
Skii22 said:
Yesterday my lg was working just fine. Before i went to sleep i locked my phone at the time battery was lower than 5% perhaps while i was sleeping some important update started but because it was such low battery the update got interrupted when phone lost all the battery. When i woke up i started charging my phone. After a while i tried turning my phone on but it was stuck in boot loop.
Tried phone factory reset but that did not work it got me to the lg welcome screen with language selection option but pressing next does nothing. I noticed that downloading mode still works on phone so maybe something can be made there saw this guide https://forum.xda-developers.com/d290n/how-to/guide-reflashing-stock-rom-d290-d295-t3142456 but i am stuck on step 3 Download a KDZ firmware file that site has adfly links and many links there i tried dont work.
What should i try to do to fix my lg and where can i get lg l fino d290n kdz file?
Click to expand...
Click to collapse
Here, try with this! Choose whichever one you like and flash it!
So today i bought my LG G6.
There was a software update (i thing Oreo update) i installed it and when i got to the secure screen on the boot.
I type my PIN ,which was valid and my phone now is stuck on the secure loading screen.
At first i thought it was just going to take some time but after 25 minutes of waiting this started to worry me.
The phone is still on loop and when i use the Power Button and the Vol down the phone restarts but the same thing happens.
I tried everything from restarting it , to hard resetting (which doesn't want to work, the bootloader menu doesn't even show up with all the steps completed correctly) to throwing it on the ground.
(PHONE IS NOT ROOTED)
EDIT:I MANAGED TO SOLVE THE ISSUE BUT NOW IM STUCK AT THE PROVIDERS SCREEN WHICH IS (TIM) AND I CANNOT DO ANYTHING OTHER THAN SOFT RESTART
Regards,
Try put the phone into download mode and use LG bridge to reflash stock [Use the "Update error recovery" to reflash]
I have a LG G6 H870I, different than all the variants I've seen here. That's why I'm posting here.
I tried to flash a .kdz ROM, via LGUP, that was older than my stock one. I read in the lg-firmwares page that if you try to downgrade, you'll brick your phone. That's what happened. I got stuck on the download mode.
All the times I tried to flash, I got an error message, since the first time. It never got completed.
The only time that I got it done completely, the phone started, but the Android circle that loads the first time you turn on the recent rom that you installed just crashed and it booted again to the "LG G6 Thinq" screen, and It never passed that.
I tried to hard reset, the hard reset screen showed up, I've put "yes", confirmed, and it booted again, but It crashed again on the circle thingy and rebooted to the "LG G6 Thinq" screen again.
All that I tried after that, I just got stuck to the Download Mode.
I tried 4 different roms (.kdz) with the LGUP, both 1.14 and 1.16 versions. I tried with UPPERCUT, without it, I've tried extracting the dll from the .kdz file and putting on the LGUP's "model\common" folder named "LGUP_Common.dll" manually, and the 8994 folder and dll. It recognizes the phone and starts, but every time I got an error message at 20%, 40%, 70%, even 99%.
Tried to reboot it, and still on the Download Mode.
After I trying so many times, now the percentage bar of the phone on download mode stops on 12-14% and gets back to the beginning and the LGUP or LGBridge just gets an error message.
The problem now is the bar percentage. It goes to 12-14% but crashes and it gets back to the begging. Now I can't flash anything at all.
I'm desperate. That's my personal phone, and I don't have a single clue of how to debrick it. I really need it. I have this one only.
Can anybody help me/save me?
Hi guys!
I've read tons of threads and guides on Google but nothing helped me to bring to life my Samsung Galaxy S8 Plus. After hours and hours of test and probes I surrender!
Basically I was using normally my phone and suddenly has power off and showing the Samsung Galaxy Logo continuously. I've force reboot it with vol down+pwr button and after some minutes restart normally again. After 5min again the boot loop and stuck there. Tried again to power it off but didn't work so I thought was the battery (because is 3yrs old with heavy use and months ago I had the screen flickering and a battery drain to zero). I opened the phone, unplug the battery and the power button (because I thought was the power button stucked as on my father phone). So after mounted all the stuff in their place I tried to boot it and suddenly start to work again! I've backup all my things rapidly but again power off by himself and this is the last time I see it working.
So I tried to empty the cache entering in the recovery but it was useless so the only way seems flashing the original FW with Odin. Downloaded the right one with Frija, upload the rights files in Odin (Home_csc because I don't want to lose my internal memory stuff) and the phone automatically reboots, pass the Samsung logo and go in Upgrading mode with the blue android screen and a % increasing. After that by himself power off and nothing happen.
I read some stuff about my possibilities to recover it without losing data but a lot of tutorial talk about entering in recovery but I cannot do it! Simply does not go in recovery with vol_up+bixby+pwr_button even after force shutdown it with vol_down+pwr_button or reattach the battery. The only thing I'm allowed to do is put it in Download Mode to be recognized by Odin.
I've tried to launch ADB devices but it is not visible in Download Mode.
I've tried to flash another firmware for the same model (theoretically my one is unbranded italian) but I tried with WIND one because in download mode there is a text "Carried_ID:WIND" but this FW Odin fail to upload it.
I've tried to flash the TWRP with Odin but fails on the phone with error "Custom binary(recovery) blocked by FRP Lock". I've searched how to unlock it but without have access to recovery or phone settings seems impossible. And this phone has also OEM Lock.
I've tried again to flash the FW but the only difference than before was the blue android robot with stucked text "Installing system update", "Erasing" , "yellow advice notice" and finally a green screen with "An error has occurred while updating the device software.Use the Emergency recovery function in the Smart Switch PC Software". And yes, I already tried with Smart Switch but the program does not detect the phone.
I've also tried to flash the original recovery but nothing change.
Seems that my devices is bricked or a kind of boot loop.
In my situation there is something that I can do to recover the internal memory data? I don't tried to flash the FW with CSC file because I don't want to erase all the data.
My Galaxy was original since the purchasing, no root or flashed a FW, only OTA updates.
I've attached a photo with the stuff that appear in Download mode.