Hi everybody!
Trying to use the combo USB hub and RJ-45 LAN port while installing winxp, I've found out that it does not work ("limited or no connectivity") because the LAN RJ45 socket seems to be wired in a different manner compared to the LAN port of a laptop or network switch or router, i.e not for 2tx +2rx pairs but for only half of them. Although I think that this is the correct standard way compatible with integrated cabled networks (computers+telephones), this confoiguration does not work on simple home networks, I don't know why. I guess that the RJ45 socket is wired in a peculier manner. I experienced the same thing with another external lan/usb adapter.
Did anybody else face this problem and found a solution / adapter?
Thank you!
The lan port is working perfectly normal. I think you should look at your cable or home setup. I've plugged is for many years in many different networks. I never used XP.
thaihugo said:
The lan port is working perfectly normal. I think you should look at your cable or home setup. I've plugged is for many years in many different networks. I never used XP.
Click to expand...
Click to collapse
Thank you Thaihugo, you are probably right that there is something in connecttion with my home network, although this is the first time it is proven not to work with one computer unit, i.e. via this combo usb hub. I will check it over the week-end. It not specific to xp, it happens in Vista too. I mentioned xp because I needed to validate the install before going ahead with the wireless board and all the trouble.
P.S. An off-topic important question: finding out that the lan adapter connection doesn't work with the fresh xp, I got back to Vista via the recovery function Fn+F3. Does this mean that I must redo the HardSPL installation and that until then I cannot flash any new ROM on the winmob side?
Nope, they are independent. HardSPL is for life (or until you flash a stock SPL)
Hi
I found some topics about that but some are old ,
how can I plug ethernet cable on iconia , I was thinking about USB adaptor but I didn t find name of product wich works.
Is it a prob of iconia or andoid ?
thanks
You'd need drivers for any device. Kernel modules, dunno if the Android kernel has any built already though. Should be easy enough to get some of the most common ones compiled though.
Hi
you mean I buy one, go to website of the supplier and try to find driver for android ?
I didn t think it was so easy
the best device for this, wifi router
You just plug in the ethernet cable and than...go wireless
ah yes I tried to use USB but you are right WIFI router is an other way, and in this case probably easier thanks
an other question about this wifi router, is it possible to use with all network ?, I mean my issu is when I am at the hotel ( very often ) and have only ethernet cable to connect .
I'm going to guess this is a laptop your using. Set up internet connection sharing and establish an ad-hoc connection to the tablet....profit.
If you're at the hotel with a desktop for some reason you can always plug the wifi USB adapter into it as well.
today when I travel I have 2 laptops , company laptop which is totally locked and I can not anything and I carry my own . I wanted to avoid to bring mine and use tablet .
it s why maybe wifi touter is good idea but don t know if I can just plug on hotel network .
You should be able to, just have to config it as an access point. It will basically act as a switch with wireless.
Hey guys,
I recently bought an xtrons headunit for my car, and I love it. I also have an ATT Netgear 340u Beam that i was hoping to use to allow the headunit to connect to the Internet. I have ATT and it is the only usb dongle I could get from them.
Normally you need a driver to get it to work, but is there any way to get it to work without a driver?
It does have a sim card, so maybe there is a way to use a different dongle with it. Any advice would be appreciated.
Or I am open to alternative solutions within the US. Have not yet found a 4g dongle that will work in the US but any ideas would be great.
Seems a lot of the Octacore (PX5) android units seem to have wireless issues. I'm curious if it's possible to add a USB wireless dongle and use that for wireless instead of the integrated wireless?
I see people adding 3g/4g dongles so I got curious about these since I have one for my PC that works great.
Thanks!
was wondering the same since, the on board wifi card sucks
I have a Joying PX5 and my WiFi adapter is bad as well. The one on my Joying Sofia unit functions much better.
So I already tried this. I have 2 USB WiFi dongles which I have normally connected to 2 Raspbery PI B+s (so the old ones).
Neither of them functioned in combination with my Joying unit.
Note that I only connected them. I tried a few things, did some reboots and that's about it.
I did not try anything (yet) with the wireless configuration in /etc. Neither did I check the logcat, etc.
But I'm afraid it will not work. I assume they only compile the WiFi drivers they need. If their Wifi chip is a BroadCom, Qualcomm (Atheros), RealTek, or whatever, I assume they will only include drivers and compile kernel support in for that hardware.
But again: that's my assumption.
Edit:
BUT: You made me curious again. I will do some "lsusb" actions to see which WiFi chip they actually use and which drivers have been compiled for the unit.
I've not had any issues with WiFi other than the scan interval is a joke.
i've seen that the comfast usb bluetooth wifi adapter has worked for some people
Hi all
I recently ordered a Xtron 10.1" head unit. TE103AP
Question is , how does the internet dongle work on the unit?
Yes it plug in to USB , but does it just make a WiFi hotspot and I connect the radio to it via WiFi, or does it have a app like on a PC. Where the internet works trough the USB with a app , so you can see the signal strength and USSD codes to check data balance.
Hope someone has used this and can help me. I dont want to order a dongle if its just a WiFi hotspot.
Thanx
On this unit with DSP https://androidautoshop.com/2-din-s...32gb-entertainment-system.html#/26-map-europe
i just connected the 4G modem and it worked. automatically. On xtrons you might need to connecto to it by wifi
I have been in contact with xtrons support and they said wifi only
I'm not sure if that is an android (rom) limitation or a usb stick limitation
When connecting the dongle to computer, the driver software gives you option to change it from wifi to usb. The driver remembers the setting, but the stick defaults to wifi when plug into another machine
Going to do some more testing with other 3g and 4g sticks and also see if can change the default on the stick
I was also disappointed to find it only worked as hotspot. I was hoping to try and setup as dongle for data and wifi for odb
I did some testing with another 4g usb and it was detected as a modem (or whatever it is). Had to use an app from the play store to modify the apn though. As previously found with these type of headunits, the usb is underpowered and I found the usb device would lose power after a minute or two and then reconnect (also had usb dab and 4gdong001 plugged in at same time)
Brendo said:
I did some testing with another 4g usb and it was detected as a modem (or whatever it is). Had to use an app from the play store to modify the apn though. As previously found with these type of headunits, the usb is underpowered and I found the usb device would lose power after a minute or two and then reconnect (also had usb dab and 4gdong001 plugged in at same time)
Click to expand...
Click to collapse
Which other 4G USB dongle did you use?
Which Play store app did you use to configure it?
Did you manage to make it run stable and not get lost after 1-2 minutes?
Cheers!
I had the same issue.Was not able to get my Huawei 4G dongle working on my Xtrons device..
That is why I am now using a spare phone I had. I installed the app Automate and made a new Flow.
Phone is now connected to the unit by USB. And every time I start thecar,USB gets power. Then the phone is triggers by Automate to start Hotspot.
That way my Xtrons unit as Wifi connection..Works great
4G dongle
Brendo said:
I have been in contact with xtrons support and they said wifi only
I'm not sure if that is an android (rom) limitation or a usb stick limitation
When connecting the dongle to computer, the driver software gives you option to change it from wifi to usb. The driver remembers the setting, but the stick defaults to wifi when plug into another machine
Going to do some more testing with other 3g and 4g sticks and also see if can change the default on the stick
I was also disappointed to find it only worked as hotspot. I was hoping to try and setup as dongle for data and wifi for odb
Click to expand...
Click to collapse
Hey bud the 4G dongle is a modem the back slides out and a simcard goes in. It gives you two different sizes options small and large if you look properly. It may look like it just plugs into a USB port but the back does slide of. Hope this helps.
Also once you plug it into your Extrons android head unit you have to go to internet settings select the 4G dongle then put on the security codes writing on the back of the dongle. Make sure you have credit on your simcard or it won't work.
Your Extrons android head unit should have a built-in WiFi antenna for internet hot spot or your WiFi at your house. There's different ways you can connect the internet to your android head unit. You can even Shere your phone WiFi data to it by pairing your phone and by making your phone act as a modern.. you will have to find your phone through the head unit maybe instead of the other way round to make that way work. I find the 4G dongle easier to connect than rather trying to use my phone as a modem.
Just download PPP Widget from PlayStore, work a charm with Huawei 4G Dongles.
What SIM card/provider is useable in the U.S.?
wayneJG said:
Hey bud the 4G dongle is a modem the back slides out and a simcard goes in. It gives you two different sizes options small and large if you look properly. It may look like it just plugs into a USB port but the back does slide of. Hope this helps.
Also once you plug it into your Extrons android head unit you have to go to internet settings select the 4G dongle then put on the security codes writing on the back of the dongle. Make sure you have credit on your simcard or it won't work.
Your Extrons android head unit should have a built-in WiFi antenna for internet hot spot or your WiFi at your house. There's different ways you can connect the internet to your android head unit. You can even Shere your phone WiFi data to it by pairing your phone and by making your phone act as a modern.. you will have to find your phone through the head unit maybe instead of the other way round to make that way work. I find the 4G dongle easier to connect than rather trying to use my phone as a modem.
Click to expand...
Click to collapse
Just been trying to figure out what provider to use here In the states to get my 4g dongle to work on my 10.1
This 4gdong001 works as lte modem in Europe? My ones says service restricted when i try to start the 4g connection into band 20 or 3!
On my case I just cloned my SIM as I have a very good data plan (30GB) and bought a small usb 4g modem (Alcatel Mw40v), I just have to turn on the wifi hotspot when at the car and the my head unit connects automatically (Atoto M6). The router disconnects when unused for some time to save the battery.
Mine does have an app but I don't really need it, I just used it for the initial configuration, been there for more than 6months now and works wonderfully (I use music stream a lot).
Dongle is working intermittently
Hello Guys,
I am new here and I have an issue with a dongle stick on a Android 8.0 head unit.
I have a Huawei 3g dongle that I want o use it at an Dasaita Android head unit. I connected the dongle and it worked fine without doing any configuration. It worked fine for one day, the next day it didn't connect to internet. I unplug and plug it in again , the dongle's led is flashing but is not connecting. What could be the cause? Thanks for helping and sorry if the question was already asked.
Daniel-sun said:
Hello Guys,
I am new here and I have an issue with a dongle stick on a Android 8.0 head unit.
I have a Huawei 3g dongle that I want o use it at an Dasaita Android head unit. I connected the dongle and it worked fine without doing any configuration. It worked fine for one day, the next day it didn't connect to internet. I unplug and plug it in again , the dongle's led is flashing but is not connecting. What could be the cause? Thanks for helping and sorry if the question was already asked.
Click to expand...
Click to collapse
Strange Head unit and 4G doungle......
I think everybody had an issue.... One day everthink is working fine, and the next day nothing working....
More useres bought a USB modedm, with wifi hot spot. Set the doungle with PC. Connect the Doungle to head unit. If it is connected fine, use Modem, if not connected connect with Wifi....
WiFi dongles require expensive data plan
The issue I have with using a 4G WiFi hotspot instead of a real 4G dongle, is that I can't set the WiFi connection to 'metered'. Most apps will only do certain tasks through WiFi, to save cellular data. Podcasts, Play Store updates, offline maps, etc. can all be configured to use WiFi only.
So when I used the Xtrons 4G dongle (which has to be used as a hotspot) for a month, I received an incredible invoice from my telco. Getting a big data plan just for my car does not make sense; it's enough if it syncs only when it's parked on my driveway using my home wifi.
So if anyone got a real 4G dongle to work on an Xtrons unit (I have the PX5 Android 8), i would be interested in the brand and model. And also if the unit will see it as cellular instead of WiFi.
6.2" ANDROID 10 DSP QUADCORE CAR DVD GPS here ( Portugal ) , going crazy trying to figure out why connection goes out after a couple minutes.... ( tried using my phone has a hotpspot and it DOES NOT loose the connection ! ( radio-usb cable -4G LTE WIFI modem usb Dongle )any info will be greatly apreciated !!!!
Xtrons unit
luismigueloliveira said:
6.2" ANDROID 10 DSP QUADCORE CAR DVD GPS here ( Portugal ) , going crazy trying to figure out why connection goes out after a couple minutes.... ( tried using my phone has a hotpspot and it DOES NOT loose the connection ! ( radio-usb cable -4G LTE WIFI modem usb Dongle )any info will be greatly apreciated !!!!
Xtrons unit
Click to expand...
Click to collapse
What connection goes out? Just 4G(what carrier)? I have been trying to make mine(United States) work with Verizon since I got it, but though it connects to verizon it never gets data. I believe it's hardcode(locked) to T-Mobile or maybe GSM in the head unit. T-Mobile worked first try with no issues. If I ever root I'll look to swap out some system packages to see if that works, but in the mean time it's more pet peeve that it sees it but won't work as I have a spare verizon sim with shared data just doing nothing. I have my hotspot connection to my unlimited phone automated and that works nearly flawlessly.
To be Fair to the Seller(IDoing) they told me up front it only worked with T-Mobile.
the WIFI connection ! ( established through a 4G LTE WIFI modem ) ( NOS-carrier) mobile Sim card - only data )
I had no "notice " of any incompatibility from the seller ( in fact I bought all items from them precisely to assure compatibility ! )
I´m waiting on a friend to bring his new HOTSPOT to see if that works ...
if there was any limitation on the carrier SIM it would also not through the smartphone hotpspot connection ....right ? ( it does ! )
Hi all, I need your help.
I have the following Chinese car head-unit android 9 for Audi. This unit is 4g supporting SIM card but unfortunately when I inserted nothing appear in the unit. Now I am trying via Huawei usb 4g dongle but I can not find the way to see the root for PPP widget in order to connect the dongle. Any suggestions to find a solution? Thank you in advance