is it I9500ZSUAMDK Brazil, becouse it has the changelist number of 565349 :silly: am i wrong. please help, i need to make my rom on the latest firmware
PLEASE... anyone
Latest firmware is from Taiwan for the gti9500 it has the highest change list
so in sammobile when i search i9500 in the firmware search is the top one the latest
does it have nothing to do with the firmware code. really, and sammobile doesnt have changelist numbers
http://www.hotfile.com/dl/213466780/7faac10/I9500UBUAMDE_I9500UUBAMDE_COO.zip.html
Did you notice any changes? . . I downloaded it but didn't flash I yet
armedking said:
Did you notice any changes? . . I downloaded it but didn't flash I yet
Click to expand...
Click to collapse
not really, but i am sure it fix something
How about the camera bug stil there ?
armedking said:
How about the camera bug stil there ?
Click to expand...
Click to collapse
i have no camera issue before :good:
Hey guys, i need the latest s4 camera firmware.
My cam is not focusing anymore, i've tried factory reset but...
Updating the firmware is my last chance till i bought another camera.
raphaelmro said:
Hey guys, i need the latest s4 camera firmware.
My cam is not focusing anymore, i've tried factory reset but...
Updating the firmware is my last chance till i bought another camera.
Click to expand...
Click to collapse
me too
The camera firmware is embedded in kernel. So, whenever you boot the device, it will take the latest revision of the firmware from the kernel.
The last thing you can try is to flash official Samsung firmware for your device and region with ODIN.
My camera also stopped focusing recently. I got it fixed by getting the camera module replaced.
Hey all
I just downloaded the latest stock firmware I9301IXCUANJ4 and after installation my stock camera app wasn't starting and gave me message "Camera server Error" So in reflashed firmware again and after that same problem occured so i contacted samsung and the already had reports of the bug and they are pulling it back for my region (the Netherlands )
So if any1 want the latest firmware go for the italion version that one is solid and has some battery drain improvement
How can i instal him? With kies or odin?
Sent from my GT-I9301I using XDA Free mobile app
Scarfangs said:
How can i instal him? With kies or odin?
Sent from my GT-I9301I using XDA Free mobile app
Click to expand...
Click to collapse
i installed it with odin
Im from italy dont know but i get some update on the phone 15mb size. I just accept and my phone go of and start to load some instalation after instalation someting about 110 application and then done my phone was one. This is the update or i need to instali with odin?
Sorry for my english
Sent from my GT-I9301I using XDA Free mobile app
Caimarcladev said:
i installed it with odin
Click to expand...
Click to collapse
have some problem with this new firmware camera dont work when you install i have also Luxembourg firmware run on my device i have juste downgrade to I9301IXXUANH1_I9301IPHNANG1_I9301IXXUANF2_HOME and now camera are work normaly
Caimarcladev said:
Hey all
I just downloaded the latest stock firmware I9301IXCUANJ4 and after installation my stock camera app wasn't starting and gave me message "Camera server Error" So in reflashed firmware again and after that same problem occured so i contacted samsung and the already had reports of the bug and they are pulling it back for my region (the Netherlands )
So if any1 want the latest firmware go for the italion version that one is solid and has some battery drain improvement
Click to expand...
Click to collapse
Hello, please do not say the latest version, because the last version has the camera bug as well.
The last confirmed working version is I9301IXXUANI1_I9301IITVANJ1_I9301IXXUANI2_HOME
I had just downgraded back from installing I9301IXCUANJ6, from the italian region. Hopefully it will avoid useless data wipes for other people :good:
Caimarcladev said:
Hey all
I just downloaded the latest stock firmware I9301IXCUANJ4 and after installation my stock camera app wasn't starting and gave me message "Camera server Error" So in reflashed firmware again and after that same problem occured so i contacted samsung and the already had reports of the bug and they are pulling it back for my region (the Netherlands )
So if any1 want the latest firmware go for the italion version that one is solid and has some battery drain improvement
Click to expand...
Click to collapse
Wich is the latest version? I9301IXCUANJ6 ?
xCoNDex said:
Wich is the latest version? I9301IXCUANJ6 ?
Click to expand...
Click to collapse
depending region from wher you are
spawk said:
depending region from wher you are
Click to expand...
Click to collapse
I have been testing all roms stock mentioned on xda forums and no one works, my camera is tottaly dead.....
xCoNDex said:
I have been testing all roms stock mentioned on xda forums and no one works, my camera is tottaly dead.....
Click to expand...
Click to collapse
yesterday i have flashed new firmware and got camera not work i have lanched odine and chek nand errase if uncheked and flashed downgrade old firmware and now camera are work but i have loste all my old setting and apps because errase del all your previous phone and install system from 0 test and you see
spawk said:
yesterday i have flashed new firmware and got camera not work i have lanched odine and chek nand errase if uncheked and flashed downgrade old firmware and now camera are work but i have loste all my old setting and apps because errase del all your previous phone and install system from 0 test and you see
Click to expand...
Click to collapse
Flashed with Nand erased disables, is that ok right?
I purchased my phone on spain, but its from ITA, im gonna test the last rom stock for this region, is the last thing left to prove
xCoNDex said:
Flashed with Nand erased disables, is that ok right?
I purchased my phone on spain, but its from ITA, im gonna test the last rom stock for this region, is the last thing left to prove
Click to expand...
Click to collapse
no flash with nand erased enabled
Again Camera Bug ( Server error)
spawk said:
yesterday i have flashed new firmware and got camera not work i have lanched odine and chek nand errase if uncheked and flashed downgrade old firmware and now camera are work but i have loste all my old setting and apps because errase del all your previous phone and install system from 0 test and you see
Click to expand...
Click to collapse
Hi Spark,
as some other users I have my problems with the Camera Bug. I flashed four in this forum recommended ROMs with wiping each time Cache, System and Internal Storage , and activated Nand Erase before flashing with Odin. But each time the error message appears again.
That somehow drives me crazy. Idon't know wht to do else. Any Idea?
Galaxy S3 Neo
Hello people
Great news, to fix S3 Neo camera server error you need to install stock rom I9301IXXUANH1 from Sammobile.
It really works
does any1 knows if the lates version (I9301IXXUANG1 from open Austria ) also has the camera bug?
cause they say this is the best firmware version with the lowest battery usage
New Phone (for mum ) and I thought lets flash new FW for Germany DBT for it... What the f**k! Camera stop working with this well known Server issue!
Its an GT-I9301I for European Region. Bought in Germany.
This one made the camera working again for me!
I9301IXCUANL1 - CYV - 08.12.2014
http://samsung-updates.com/details/40228/Galaxy_S3_Neoplus/GT-I9301I/CYV/I9301IXCUANL1.html
And this one works also
I9301IXCUAOA1 - PHE - 09 Jan 2015
http://www.sammobile.com/firmwares/download/42204/I9301IXCUAOA1_I9301IPHEAOA1_PHE.zip/
Thanks goodness. Thought I bricked the phone right out of the box
Thanks to this thread for kicking me in the right direction!
when you bought the phone had the version XXUAN ... but if flashi firmware XCUAN .... the camera will not work and will fail. If you would like to solve the problem you have to flash the firmware again that had your phone when it was bought
fraross said:
when you bought the phone had the version XXUAN ... but if flashi firmware XCUAN .... the camera will not work and will fail. If you would like to solve the problem you have to flash the firmware again that had your phone when it was bought
Click to expand...
Click to collapse
that's right. we've got 2 versions with 2 cameras. xc camera and xx camera. this is not a bug. people just flash the appropriate rom for each. don't mix.
If it's not a bug, than why does the official ota flash the wrong update?
putti71 said:
If it's not a bug, than why does the official ota flash the wrong update?
Click to expand...
Click to collapse
Maybe because OTA will flash updates for the current installed firmware. For example if you have got a XCUAN firmware OTA will fash the updated version for XCUAN. if you have got a XXUAN firmware OTA will fash the updated version for XXUAN. if the camera won't work after the update you have to install the correct update manually. You can find firmwares on SAMMOBILE
I have Samsung Galaxy S8 G950W having Android 7.0 with Samsung Experience 8.1 and Baseband Version G950WVLS2ARA1. I intend to update it to 9.0. Where can I find its official update through Odin installation? I'm not in the region to find OTA.
Thanks
Use updato.com. You can use SamMobile but it takes years without a premium account. HOWEVER YOU CAN'T FLASH THE NEWEST SOFTWARE IF THE PHONE IS WAY BEHIND..... EITHER FLASH THE FIRMWARE BUT THAT ALLOWS OTA UPDATES OR FLASH EVERY FIRMWARE ONE BY ONE. I hope this helped:laugh:
I have found G950WVLU5CSD5_G950WOYA5CSD5_VMC and downloaded. But am not yet sure about the right firmware. Is there any way to get it confirmed?
alaxee said:
I have found G950WVLU5CSD5_G950WOYA5CSD5_VMC and downloaded. But am not yet sure about the right firmware. Is there any way to get it confirmed?
Click to expand...
Click to collapse
As long u are searching for correct model of your phone u are good to go
U can use sammobile,updato.com, samfrew.com to download firmware for your model ( there is even samfirm pc app to download firmware at full speed)
Also u can flash pie or any other release without needing to install one by one firmware as suggested above.
Good to go. Trying...
I wanted to resurect this phone for it's oxygen sensor. I know at some point it had O2 sensor.
Right now it's running nougat FrankensteinS6 ROM. Some reported that downgrading the samsung health app fixed it, but it does not seem to work for me. Others reported that flashing another region fixed it. Unfortunately the W8 is Canada only so I can't flash another zone. Should I try to downgrade to a 6.0.1 firmware?