I'm looking at getting one of these but wondering what version it is up to now? Sites where they sell it only ever show the version that it was initially released on. Is it still getting updates? What about security patch level? Just asking because I am having a hard time finding a local store that has it on the shelf to give it a few minutes of hands on.
Thanks.
The Z380M is upgradeable to Android 7.0. The latest security patch level is January, 2018. You can check the Asus support site downloads for info on the latest FW. They've been pretty timely with security updates. But they don't fix bugs with the OS itself, like battery calibration and log spamming And I doubt there will be any more major updates to this tablet.
Now FOTA (system update) offers update 308MB size, I tried to flash but when android reboots it reboots in TWRP (my P00A rooted and have TWRP) and nothing happening, tried rename update file to zip and flash via TWRP but not flashing, TWRP error 12
@PxYra, the incremental update needs a clean, unmodified firmware. It won't install to rooted devices or any other FW configuration where TWRP is forced to stay in place. Please download the full FW package from Asus' support site, install then reroot, etc.
Related
Hey guys,
My G5+, which is running NPN25.137-83, rooted with Magisk, TWRP, Xposed just prompted me for an OTA update.
I'm guessing if i try to update i'll (best case scenario) break something, worst case brick my phone.
I'm running Aug2017 security patch.
This OTA update says it includes Security updates till Nov2017 + Stability improvements.
Any suggestions? Thanks!
seed_87 said:
Hey guys,
My G5+, which is running NPN25.137-83, rooted with Magisk, TWRP, Xposed just prompted me for an OTA update.
I'm guessing if i try to update i'll (best case scenario) break something, worst case brick my phone.
I'm running Aug2017 security patch.
This OTA update says it includes Security updates till Nov2017 + Stability improvements.
Any suggestions? Thanks!
Click to expand...
Click to collapse
Do not apply the update, it will end up failing as you have TWRP installed, but every time you restart your phone, it will boot to TWRP and then you'll have to reboot from TWRP to bootloader and then system. Anyways, I recommend waiting until the OP of the TWRP flashable stock thread updates the links with that update and then flash the update via TWRP. Make sure you go into developer options and turn off automatic updates. You can also use an app to freeze Motorola update service if you don't want to be notified about the update.
jeffsga88 said:
Do not apply the update, it will end up failing as you have TWRP installed, but every time you restart your phone, it will boot to TWRP and then you'll have to reboot from TWRP to bootloader and then system. Anyways, I recommend waiting until the OP of the TWRP flashable stock thread updates the links with that update and then flash the update via TWRP. Make sure you go into developer options and turn off automatic updates. You can also use an app to freeze Motorola update service if you don't want to be notified about the update.
Click to expand...
Click to collapse
Per the TWRP flashable stock thread guide, I downloaded the OTA and shared the zip there
Thanks @jeffsga88! I will disable automatic updates to avoid any accidents.
Hi,
since I've rooted my phone it seems that OTA updates are broken. Does somebody know if I can fix OTA updates by flashing stock rom with mi flash tool? Or do others have problems with March security patch, too?
Last night, I received the OTA for March (after I updated Google Play Services manually from apkmirror). It couldn't install the update, gave me the error. I restarted the phone, tried again, same thing. This is a fix but it takes time : download and flash the february firmware (ran the .bat script, I don't really like mi flash). After that, you can update without issues.
Hi guys,
I recently fixed 6p with bootloop problem. Currently it's running latest 8.1 android version and im getting notifications about latest security patch. So my question is: how can I apply that update without bricking the phone. Will OTA update bricks the phone again?
Updating via OTA would put your phone right back into a bootloop. In order to update from now on you'll have to flash the updates manually by downloading the factory images from Google and installing each piece separately via fastboot, EXCEPT for the kernel (boot.img) and recovery (recovery.img).
Thanks
Thanks very much for clarifyng this. I have downloaded the latest April update from google but it still offers some 60MB update. I guess I'll wait for May release and update manually then. Many thanks again!
Firmware Finder shows there's a new update available for my BTV-W09. It's B355 dated 06/05/18. It's a small OTA, only 190mb. Has anybody installed it? Does anybody know what's in it?
Firmware Finder provides the changelog. It has the June security patches.
No netflix hd update? ****!
How install? I don't remember. [emoji28]. Thanks in advance.
Enviat des del meu ONEPLUS A6003 usant Tapatalk
Anyone have any luck applying this update with TWRP recovery? Looks like it is going to require a flash back to stock to apply?
I was only able to install it with stock. Even then, it had to be the full install, not the OTA update. That install locks the bootloader and unroots; so I then had to re-unlock, which of course wipes the entire device, and then restore from a Google and Titanium backup. Not sure updating is worth the pain. really.
My rooted tab is now threatening to install this update when I reboot. Does anybody remember how to stop a firmware update when it wants to update on reboot?
I don't think there's much to worry about as if you're rooted with TWRP, it'll just reboot into TWRP and wait for you to manually apply it, if you can find it on the file system.
I'm currently trying to apply B356 which was recently released. This minor update contains the July 2018 Google security patches. The last time I did this from B351, this is what I did:
Via TWRP, Installed the 2 full OTA zip files for B352 downloaded with firmwarefinder. This replaced TWRP with the stock recovery but did not wipe my data.
Rebooted, and applied B353 via the normal OTA through settings. This installed the B353 full package (2.52GB).
Reinstalled TWRP with fastboot (twrp_BTV-W09_5_greatslon.img)
Booted to TWRP & installed Magisk
Re-enabled the 5GHz wifi radio
However, this doesn't seem to be working with B356 thus far. Installing the Firmwarefinder zip files failed (at least update.zip did, I didn't try the other two) so I installed the FF B352 images mentioned above. However, applying the stock OTA through settings wants to install 3 patches (B353, June 18, July 18) of size 786MB. They downloaded successfully but then it fails to apply during the reboot.
Anyone else have any luck? What did you wind up doing?
Thanks!
Every time I've applied an update, I ended up locking the bootloader and then having the phone wiped when I unlock the bootloader. I'd love to find a way to update without locking the bootloader. If you find a way to that with this update, please let post how you did it!
Hi, I've just received a second hand OnePlus 5T. I used the unbrick tool, which left the phone on OxygenOS 5.1.3 (Android 8.1.0). But if I try to update from the menu it says the system is up to date and with local update it fails.
I unlocked and rooted the phone now and I can't update it neither. Anyone knows what to do to install the latest OxygenOS version and/or custom roms based on Android 10/11?
Rappala said:
Hi, I've just received a second hand OnePlus 5T. I used the unbrick tool, which left the phone on OxygenOS 5.1.3 (Android 8.1.0). But if I try to update from the menu it says the system is up to date and with local update it fails.
I unlocked and rooted the phone now and I can't update it neither. Anyone knows what to do to install the latest OxygenOS version and/or custom roms based on Android 10/11?
Click to expand...
Click to collapse
Install Oxygen Updater from the Play Store and it'll show you the latest OxygenOS version you can update to without data loss. Once you're done installing that, re-open the app and then it'll show you the even newer version of OxygenOS that you can install over your existing installation.