My redmi 3s prime device is currently in MIUI v9.5.1 stable. I have successfully unlocked bootloader (official method)
Installed twrp 3.2.1 using adb/fastboot it is also successful.
in TWRP i tried installing supersu v2.82 zip file, console shows no errors, but after system reboot I could not see SuperSU app, Root checker also reports device not rooted. I have tried couple more times to install supersu, but not able to see it.
Can anyone help where it went wrong, anyone tried rooting from MIUI 9.5?
youkarthik said:
My redmi 3s prime device is currently in MIUI v9.5.1 stable. I have successfully unlocked bootloader (official method)
Installed twrp 3.2.1 using adb/fastboot it is also successful.
in TWRP i tried installing supersu v2.82 zip file, console shows no errors, but after system reboot I could not see SuperSU app, Root checker also reports device not rooted. I have tried couple more times to install supersu, but not able to see it.
Can anyone help where it went wrong, anyone tried rooting from MIUI 9.5?
Click to expand...
Click to collapse
Flash Magisk
Inviato dal mio Redmi 3S utilizzando Tapatalk
Related
Plz help
Friends I'm a newbie here on xda. I don't know much about this but I wanna know. I have a xiaomi redmi note 4g single sim. I installed twrp by using built in feature of installing update manually. But when I installed SuperSU it is asking for binary update via twrp so when I proceed it takes me to twrp and then something appear like writing scripts and all and then it restarts but again when I open SuperSU it ask for binary update. What should I do? Could anyone help me plz.
jhapeshal said:
Friends I'm a newbie here on xda. I don't know much about this but I wanna know. I have a xiaomi redmi note 4g single sim. I installed twrp by using built in feature of installing update manually. But when I installed SuperSU it is asking for binary update via twrp so when I proceed it takes me to twrp and then something appear like writing scripts and all and then it restarts but again when I open SuperSU it ask for binary update. What should I do? Could anyone help me plz.
Click to expand...
Click to collapse
After you flashed superSU by twrp. run superSU and it will prompted you to downloaded binary. Updated it and waiting it successfully updated the binary. Roboot your phone. Done. Also installed sdFix from play store, it will enabled those third parties applications like root explorer, titanium backup, nandroid manager etc write/save to external sd card.
Sent from my Redmi Note 2 using Tapatalk
timberwolf60 said:
After you flashed superSU by twrp. run superSU and it will prompted you to downloaded binary. Updated it and waiting it successfully updated the binary. Roboot your phone. Done.
Sent from my Redmi Note 2 using Tapatalk
Click to expand...
Click to collapse
I have done that but it's promoting again and again to update binary and
I have done that step almost 6 times but nothing happening
jhapeshal said:
I have done that but it's promoting again and again to update binary and
I have done that step almost 6 times but nothing happening
Click to expand...
Click to collapse
Reflashed "UPDATE-SuperSU-v2.46.zip" which was a stabled version. When it asked you to update the binery, I always selected normal option.
Sent from my Redmi Note 2 using Tapatalk
I Successfully installed cm 13 on zenfone 2 laser ze550kl
Now installing SuperSU from play store says su binaries need to be updated
I tried normal installed
I tried flashing SuperSU 2.56 beta.zip through twrp 3.0
I even enabled root for app and adb from developer options while doing these process
But nothing works!!!
CM13 is rooted by default but you have to enable it in settings. Do not use SuperSU because CM uses a different root manager.
You can use BETA-SuperSU-v2.71-20160331103524.zip its works with 550 kl. Flash it via twrp . then open it . its work.http://forum.xda-developers.com/zen...persu-cm-13-marshmallow-tested-550kl-t3359237
No need to install SuperSU if you have enabled root access on CM13.
Please write in the ROM thread...
I didn't found here something for rooting Nexus 5x with Oreo 8.1 Security Patch February 2018 just with SuperSU and Magisk isn't always an option(for me).
Required: unlocked bootloader, TWRP 3.2.1-0 installed
Go to Playstore and install Chainfires SuperSU v2.82. Download the attached file and put it to your internal storage. Reboot to TWRP and install SR5-SuperSU-v2.82-SR5-20171001224502.zip. Reboot to system. After two reboots you will be back in system and SuperSU is working. If you don't install the app first through Playstore, you won't find any SuperSU in your app list. I don't know why, but this way worked for me and i tried it several times, because i didn' want to have Magisk on this phone. Viper4android is also working without any problems. Hope this helps anybody with the same problem.
Coredown said:
I didn't found here something for rooting Nexus 5x with Oreo 8.1 Security Patch February 2018 just with SuperSU and Magisk isn't always an option(for me).
Required: unlocked bootloader, TWRP 3.2.1-0 installed
Go to Playstore and install Chainfires SuperSU v2.82. Download the attached file and put it to your internal storage. Reboot to TWRP and install SR5-SuperSU-v2.82-SR5-20171001224502.zip. Reboot to system. After two reboots you will be back in system and SuperSU is working. If you don't install the app first through Playstore, you won't find any SuperSU in your app list. I don't know why, but this way worked for me and i tried it several times, because i didn' want to have Magisk on this phone. Viper4android is also working without any problems. Hope this helps anybody with the same problem.
Click to expand...
Click to collapse
Thank you for your post.
I've tried several times to root the Nexus 5x only flashing the SuperSU by fastboot but I never rooted the phone.
I followed your suggestions and now it works.
Also the version of SuperSu to flash was different. I kept flashing an S3 while the one published by you was an S5.
Thank you.
bluemarine57 said:
Thank you for your post.
I've tried several times to root the Nexus 5x only flashing the SuperSU by fastboot but I never rooted the phone.
I followed your suggestions and now it works.
Also the version of SuperSu to flash was different. I kept flashing an S3 while the one published by you was an S5.
Thank you.
Click to expand...
Click to collapse
Your very welcome. Nice to see that I could help you
It works like a charm, thanks so much!!
I failed in the past because I installed SR5-SuperSU-v2.82-SR5-20171001224502.zip first, then install SuperSU app. SuperSU app then needs to update binary, then the phone stuck.
Funciono en mi Moto G4 con AOSP Extended 5.6/Oreo 8.1, no crei que me fuera a funcionar y probe con el root checker
mod edit - translation added
I run on my Moto G4 with AOSP Extended 5.6 / Oreo 8.1, I did not think it would work and probe with the root checker
Excellent! Thank you!
hello I have tried several applications to try to get root on my redmi 3s device without getting good results. I would like to get root without adb or fastboot, just with some application. I already tried with kingroot, framaroot, a Chinese native etc .... the version that I have installed today is MIUI 10.2 stable version running marshmallow 6.0.0. thanks for helpme:good:
When I wanted to root, I also used all of these apps but they could not root my REdmi 3s. If you have a PC best way is to unlock the bootloader and then install TWRP and then flash magisk or SuperSU zip file.
harshitsharma03082005 said:
When I wanted to root, I also used all of these apps but they could not root my REdmi 3s. If you have a PC best way is to unlock the bootloader and then install TWRP and then flash magisk or SuperSU zip file.
Click to expand...
Click to collapse
Yes friend, that is indeed the best way, what I wanted is to find an application that would do it by itself, I think that with the MIUI stable you can not without PC. I already have the bootloader unlocked for years, but I reinstalled the stable MIUI and I left it like that, in the past I tried many ROMs. Thank you very much for trying to help, it does so in console and with the command adb fastboot flash recovery.
AFAIK there might be no app that could root MIUI phones or perhaps newer android versions because I tried using these apps on my Lenovo K8 Note also which is stock Android 8.1 and they couldn't root that either.
harshitsharma03082005 said:
AFAIK there might be no app that could root MIUI phones or perhaps newer android versions because I tried using these apps on my Lenovo K8 Note also which is stock Android 8.1 and they couldn't root that either.
Click to expand...
Click to collapse
Yes brother, make root with super su or magisk, in twrp recovery.
After flashing cutom rom ( Reloaded) the phone LOOSES root access...i checked via root checker. I tried flashing SuperSu via TWRP but that also does not work.
I have tried all apps available on playstore
Any solution ?
asn39 said:
After flashing cutom rom ( Reloaded) the phone LOOSES root access...i checked via root checker. I tried flashing SuperSu via TWRP but that also does not work.
I have tried all apps available on playstore
Any solution ?
Click to expand...
Click to collapse
Try with magisk.zip.
I recently got a my Xiaomi Mi 9T, I unlocked the bootloader, rooted it and did the standard process of installing the kernel, when I installed TWRP and flashed the kernel it booted and got stuck at the nethunter logo, i tried to do this a couple of times, I had to restore again using mi flash. how do I fix/install this? Please Help me
Kernels are for specific Android version. Did you use proper kernel for your Android?
I've never seen kernel for nethunter for 9T
Niksa2 said:
I recently got a my Xiaomi Mi 9T, I unlocked the bootloader, rooted it and did the standard process of installing the kernel, when I installed TWRP and flashed the kernel it booted and got stuck at the nethunter logo, i tried to do this a couple of times, I had to restore again using mi flash. how do I fix/install this? Please Help me
Click to expand...
Click to collapse
rehearsal like this:
1. twrp orange fox
2.format and wipe
3.flash: fw "miui_DAVINCIGlobal_V11.0.5.0.QFJMIXM_aaab5b40c7_10.0.zip" flash "AOSiP-10-Quiche-davinci-20200526-gapps.zip" flash "Magisk-v19.3.zip" flash "Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip"
4.reboot
5.inizializza and upgrade Magisk (download update Magisk to phone)
6.download Busybox module (Magisk)
7.poweroff
8.twrp flash "nethunter-2020.2-davinci-miui-ten-kalifs-full.zip" flash (Magisk downloaded to phone) flash "Disable_Dm-rity_ForceEncrypt_03.04.2020.zip"
9.reboot