Related
If you wanna restock your Indian Honor 5X (kiw-l22) for warranty reasons, etc, this guide should, well, guide you!
This method works no matter which recovery or rom you're on. Data is wiped. So backup if you care about your data.
1) Download the following file and extract it.
http://consumer.huawei.com/in/support/downloads/detail/index.htm?id=76783
2) Copy the dload folder to your phone's external memory card.
3) Shut down your 5X and let it stay like that for 10-20 seconds.
4) Press and hold the volume up and down buttons and press the power button.
5) Let go of the power button once you feel the vibration while keeping the volume buttons pressed.
6) The device should enter Software Upgrade mode and the flashing should start automatically.
7) Let it flash and reboot twice.
8) You'll be back to 100% stock. :highfive:
PS : If anybody is kind enough to mirror the file, I'll be glad to add it to the OP.
Direct download link : India http://download-c.huawei.com/download/downloadCenter?downloadId=76783&version=289995&siteCode=in
For other channels :
http://download-c.huawei.com/download/downloadCenter?downloadId=76524&version=286788&siteCode=in
This will be handy when an update is arriving
Thanks You. my phone was getting slow with all the custom roms and debloats. got back to stock and applied the B140 Update.
abehrani said:
Thanks You. my phone was getting slow with all the custom roms and debloats. got back to stock and applied the B140 Update.
Click to expand...
Click to collapse
Oh really ? Just on Stock + Root din't it work charm removing bloatware ?? Only three were on for our devices -Bliss, Cm13.0, 12.1
kartrikpal said:
Oh really ? Just on Stock + Root din't it work charm removing bloatware ?? Only three were on for our devices -Bliss, Cm13.0, 12.1
Click to expand...
Click to collapse
Well for me yes it worked !!
I flashed stock B130 then updated to B150 . Then twrp, root , debloat script and root app remover. Phone finally working the way It was before. I will flash cm 13 or 12.1 after finger print sensor working on CM.
abehrani said:
Well for me yes it worked !!
I flashed stock B130 then updated to B150 . Then twrp, root , debloat script and root app remover. Phone finally working the way It was before. I will flash cm 13 or 12.1 after finger print sensor working on CM.
Click to expand...
Click to collapse
Even i'm waiting for it, i tried porting fingerprint sensor - flashed it did not work either.
Hello,
Do you think I can use this rom on my L21 ?
Thanks
newic2001 said:
Hello,
Do you think I can use this rom on my L21 ?
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/honor-5x/how-to/kiw-l21-c432b130-uk-revert-package-t3368480
CosmoDroid said:
http://forum.xda-developers.com/honor-5x/how-to/kiw-l21-c432b130-uk-revert-package-t3368480
Click to expand...
Click to collapse
Thank you
Flash 4 files boot system cyst recovery from b150 upgard but emui showing 2.0 plz help
abehrani said:
Well for me yes it worked !!
I flashed stock B130 then updated to B150 . Then twrp, root , debloat script and root app remover. Phone finally working the way It was before. I will flash cm 13 or 12.1 after finger print sensor working on CM.
Click to expand...
Click to collapse
Finger print sensor fixed in CM13, the build should be up soon. Here is the post from the forum:
http://forum.xda-developers.com/showpost.php?p=67317455&postcount=1142
Hi,
on KIWI-L22 (Indian)
I had enrolled for beta program previously, so installed b130 and updated to 6.0 MM beta. I didnt like it much, so I switched back to CM 13.0.
As Official MM 6.0 is out now, so I wanted to switch to stock.
Following the procedure mentioned in OP, I downloaded L22-B130 and tried to restore stock but it failed mentioning "wrong version".
then I downloaded the L22-B320 version
http://www.hihonor.com/in/support/details/?DOC_ID=83346
and follow the same procedure. "voila" I returned to stock MM 6.0.
My whole point in saying all this is once upgraded to MM, then you have to use the MM "update.app".
Many thanks to Cosmodroid for this post.
is this okay to do with TWRP recovery?
ruler01 said:
is this okay to do with TWRP recovery?
Click to expand...
Click to collapse
this post is old from July ..have you checked the forums for newer methods ?
Sent from my KIW-L22 using Tapatalk
Link doesn't exist
The link you are posted does not exist and it shows error. Please update the exact link.
CosmoDroid said:
If you wanna restock your Indian Honor 5X (kiw-l22) for warranty reasons, etc, this guide should, well, guide you!
This method works no matter which recovery or rom you're on. Data is wiped. So backup if you care about your data.
1) Download the following file and extract it.
http://consumer.huawei.com/in/support/downloads/detail/index.htm?id=76783
2) Copy the dload folder to your phone's external memory card.
3) Shut down your 5X and let it stay like that for 10-20 seconds.
4) Press and hold the volume up and down buttons and press the power button.
5) Let go of the power button once you feel the vibration while keeping the volume buttons pressed.
6) The device should enter Software Upgrade mode and the flashing should start automatically.
7) Let it flash and reboot twice.
8) You'll be back to 100% stock. :highfive:
PS : If anybody is kind enough to mirror the file, I'll be glad to add it to the OP.
Click to expand...
Click to collapse
You said, no matter which recovery you're on,
But I tried with twrp and incompatible stock recovery, shows "Software Install Failed".
What do you think about this? Please give me a as solution, I'm in bootloop.
Device: KIW-L22
Also tell me about the transfer package shown in the screenshot.
Due to quite a bit of research, I now have faith in the rebranding method. I'd like to share the method and knowledge for rebranding with the XDA community.
Currently Available Rebrandings:
For Mate 9:
MHA-L29C432 (Dual sim, European version)
MHA-L29C10 (Dual sim, Russian version)
MHA-L09C432 (Single sim, European version)
MHA-AL00C00 (Dual sim, Chinese version)
For Mate 9 Pro:
LON-L29C636 (Mate 9 Pro, Int'l Version, Asia)
LON-L29C432 (Mate 9 Pro, Europe Version)
LON-AL00C00 (Chinese version)
Requirements:
1. (VERY IMPORTANT!!)THE DNS ON YOUR ROUTER MUST BE SET TO 37.114.61.203 -- Make sure this is done and it works before proceeding.MOD EDIT:Link to paid service removed If you can not set your DNS server on your wifi router, you might not be able to recover your phone. Changing windows DNS settings will not help!. The setting must be done on your wifi router. Consider this your warning!
2. External storage (SD card or USB OTG for Mate 9, and USB OTG for Mate 9 Pro)
3. Bootloader code
4. Ability to install TWRP (Check the TWRP thread)
5. MOD EDIT:Link to paid service removed A way to flash firmware to Mate 9.
(NOTE: The partition table is different between versions, and MOD EDIT: Link to paid service removed is the only method I know of right now that can handle changing those. If you use another method and brick your phone, please don't blame me.)
Steps:
0. Before starting, do a full factory reset from the Settings, Advanced Settings menu.
1. Unlock your bootloader, and install TWRP. For instructions doing this, check the TWRP thread.
2. With your external storage inserted into your phone, enter TWRP by holding Volume Up key without USB cable attached to your computer.
3. Once in TWRP, go to the backup menu, and make a backup of your oeminfo partition.
4. Turn off your phone.
5. Put the SD card or USB drive into your computer, look in the TWRP folder, and find the oeminfo backup.
6. Replace the files in the backup with the same files from the download link below for the version you want to rebrand to. Keep your original files somewhere safe so you can go back if you need to.
7. Put the SD card or USB drive back into the phone, boot back into TWRP, then restore the oeminfo partition you just modified.
8. REMOVED flash the firmware that matches the model you rebranded to. REMOVED
9. After the flash has finished, boot into recovery by holding volume up key. Choose the second option to wipe data/factory restore, then choose the third option to wipe cache. Your phone will now boot.
IF YOU HAVE TROUBLE AFTER FLASHING (Wrong version number, no OTA update in the menu, etc.):
1. Perform a factory reset from the setting menu, then do eRecovery again.
2. Ensure that you chose a compatible firmware.
NOTE:
It is very likely you will have trouble after the first flash. You will most likely need to flash TWICE with eRecovery.
oeminfo links:
Thank you for your help.
I've done the conversion almost as you sad but I encounter some problems.
So I started from MHA-AL00C00 and wanted to have MHA-L29C432
1. I've installed TWRP and backup-ed/ restored the oeminfo from your download link.
2. After the oeminfo restore and reboot the phone was in a booting loop - I could't get into TWRP anymore- I could only go into fastboot or into eRecovery.
3. As I didn't have the posibility to get access to modify the DNS on router (I was not home) I flashed MHA-L29C432B138 using HiSuite method.
After succsfully flashed I still have the normal bugs like directly flashing the EU software - Themes do not work, wallpaper changes to default, no Update, etc...
Right now on the phones it shoes :
Model Number : MHA-L29
Build number : NRD90M test-keys
Can you give some advice how I can rebrand it so it is full functional on EU software ? Is the eRecovery the only method I should use ?
Thanks
Iacomia said:
Thank you for your help.
I've done the conversion almost as you sad but I encounter some problems.
So I started from MHA-AL00C00 and wanted to have MHA-L29C432
1. I've installed TWRP and backup-ed/ restored the oeminfo from your download link.
2. After the oeminfo restore and reboot the phone was in a booting loop - I could't get into TWRP anymore- I could only go into fastboot or into eRecovery.
3. As I didn't have the posibility to get access to modify the DNS on router (I was not home) I flashed MHA-L29C432B138 using HiSuite method.
After succsfully flashed I still have the normal bugs like directly flashing the EU software - Themes do not work, wallpaper changes to default, no Update, etc...
Right now on the phones it shoes :
Model Number : MHA-L29
Build number : NRD90M test-keys
Can you give some advice how I can rebrand it so it is full functional on EU software ? Is the eRecovery the only method I should use ?
Thanks
Click to expand...
Click to collapse
Hello.
To clarify, do you mean that you put the phone in fastboot and used HiSuite?
If it's possible, you should use eRecovery. I know that fastboot+HiSuite will not work correctly for rebranding (it will have the side effects you mentioned) but you might be able to try booting the phone, then using HiSuite update function.
But the way which is most successful is eRecovery. This goes for flashing regular updates as well. HiSuite is more convenient, but eRecovery is more reliable.
duraaraa said:
Hello.
To clarify, do you mean that you put the phone in fastboot and used HiSuite?
If it's possible, you should use eRecovery. I know that fastboot+HiSuite will not work correctly for rebranding (it will have the side effects you mentioned) but you might be able to try booting the phone, then using HiSuite update function.
But the way which is most successful is eRecovery. This goes for flashing regular updates as well. HiSuite is more convenient, but eRecovery is more reliable.
Click to expand...
Click to collapse
HI,
I put the phone in fastboot and used HiSUite to flash with funkyHuawei..
One more question : Now after the update when i put the phone in fastboot it shows as Phone Locked/ FRP unloked - is it normal ? SHould I do the enire procedure from the start to unlock the bootloader--> TWRP-->oeminfo--> reflash with FunkyHuawei or just reflash? to get the official update doesn't work neither from normal login or from fastboot.
Thanks
Iacomia said:
HI,
I put the phone in fastboot and used HiSUite to flash with funkyHuawei..
One more question : Now after the update when i put the phone in fastboot it shows as Phone Locked/ FRP unloked - is it normal ? SHould I do the enire procedure from the start to unlock the bootloader--> TWRP-->oeminfo--> reflash with FunkyHuawei or just reflash? to get the official update doesn't work neither from normal login or from fastboot.
Thanks
Click to expand...
Click to collapse
You don't need to touch TWRP again. Just use eRecovery method, and it should work. HiSuite/fastboot is only good for recovering a previous version, not good for flashing a new version.
Any luck getting oeminfo and/or firmware for the US version?
tortillathehun said:
Any luck getting oeminfo and/or firmware for the US version?
Click to expand...
Click to collapse
oeminfo is fine, I can make it for any version. But firmware is not available yet.
Updated to add LON-AL00 support.
Hi, I've just rebranded my Mate 9 Pro, everything seems good, but the build number shows NRD90M test-keys. Is there a way to correct this? Thank you!
nerds said:
Hi, I've just rebranded my Mate 9 Pro, everything seems good, but the build number shows NRD90M test-keys. Is there a way to correct this? Thank you!
Click to expand...
Click to collapse
Use erecovery to install the correct firmware.
Is it possible to rebrand from MHA-AL00 to MHA-L29C636, or MHA-L29C900. I'm living in China, and would like to receive OTA updates, I do have a SIM card from the Philippines. Thanks
Just to confirm , if you use HiSuite you will not get OTA and themes,etc just like reflashing without changing oeminfo. If you use eRecovery everything goes as intended. I haven't try to flash the firmware with Two or other similar. I just used funkyhuawei for both methods.
I wanna rebrand a phone (Chinese to International) but the monthly payment seems to me ridiculous, once I rebrand it I don't see the need to use the service anymore, it should be a one time payment.
Sent from my MHA-AL00 using Tapatalk
Please duraraa. if possible post also the files for L29C432 oeminfo, thanks a lot
DKM119 said:
I wanna rebrand a phone (Chinese to International) but the monthly payment seems to me ridiculous, once I rebrand it I don't see the need to use the service anymore, it should be a one time payment.
Click to expand...
Click to collapse
You don't need to. You can just cancel the subscription afterwards.
Sent from my MHA-L29 using XDA Labs
lukemo said:
Please duraraa. if possible post also the files for L29C432 oeminfo, thanks a lot
Click to expand...
Click to collapse
It's posted now
Governa said:
You don't need to. You can just cancel the subscription afterwards.
Sent from my MHA-L29 using XDA Labs
Click to expand...
Click to collapse
With the new system (credits) I will be using the service to rebrand my phone.
Sent from my MHA-AL00 using Tapatalk
and for that i payed you 30 usd ?
please correct me if it is anything else ?!
Schucha said:
and for that i payed you 30 usd ?
please correct me if it is anything else ?!
Click to expand...
Click to collapse
I'm not sure what you are asking, but $30 can buy credits for the FunkyHuawei service.
gm007 said:
Use erecovery to install the correct firmware.
Click to expand...
Click to collapse
I've tried the eRecovery again. But gave me error msg of: Getting package info failed. And the bootloader didn't relock itself.
I'm also one of the fools that got his phone stuck in the boot... it boots up till the Huawei logo and after that nothing. I've tried several solutions but still no luck.
I've3 got the Nougast recovery from Bulywolf (or something) and i've tried flashing different roms but no luck so far. I also made the mistake to change the data partition from f2 to ext4... I guess that caused all the problems but how do i solve it?
It is actually doing my head in...
I managed to install the first file from the rollback tutorial... It said it was succesfull but now I'm still stuck seeing the Huawei logo... So I guess it didn't work
Edit: Managed to get in! But it says my version is NRD90M test-keys....
Chippie_83_ said:
I managed to install the first file from the rollback tutorial... It said it was succesfull but now I'm still stuck seeing the Huawei logo... So I guess it didn't work
Edit: Managed to get in! But it says my version is NRD90M test-keys....
Click to expand...
Click to collapse
1 : http://download-c1.huawei.com/download/downloadCenter?downloadId=93788&version=373426&siteCode=nl
2 : http://download-c1.huawei.com/download/downloadCenter?downloadId=93803&version=373438&siteCode=nl
put those in dload map at sdcard...first make the small file after let him reboot and flash the 1.68gb file also in erecovery.
I have a P9lite dead too
Hi guys i have a p9 lite in boot loop because i tried (cause i´m fool) to update from file in 3 buttons way, i don´t have frp unlocked and bootloader neither how can i fix this? the version i tried to update is the VNS-L23C605B329_DATA_VNS-L23_hw_la thanks!
Kcetin20 said:
1 : http://download-c1.huawei.com/download/downloadCenter?downloadId=93788&version=373426&siteCode=nl
2 : http://download-c1.huawei.com/download/downloadCenter?downloadId=93803&version=373438&siteCode=nl
put those in dload map at sdcard...first make the small file after let him reboot and flash the 1.68gb file also in erecovery.
Click to expand...
Click to collapse
I love you man! :highfive:
You are some sort of GOD to me now!
Hail to the king!
(In case you wonder: yes it works like a charm!)
djbeatmaker said:
Hi guys i have a p9 lite in boot loop because i tried (cause i´m fool) to update from file in 3 buttons way, i don´t have frp unlocked and bootloader neither how can i fix this? the version i tried to update is the VNS-L23C605B329_DATA_VNS-L23_hw_la thanks!
Click to expand...
Click to collapse
Are you sure you have right phone version VNS-L23?
You wanted to update to B329 which is Android 7.0 right? If so, put the right package to downgrade to MM and then try three-buttons way.
yeah my device is the VNS-L23C605B120 and i can´t find any update.app that could work, the device stay in logo mode when I tried to downgrade it or reflash it..
Volenir said:
Are you sure you have right phone version VNS-L23?
You wanted to update to B329 which is Android 7.0 right? If so, put the right package to downgrade to MM and then try three-buttons way.
Click to expand...
Click to collapse
djbeatmaker said:
yeah my device is the VNS-L23C605B120 and i can´t find any update.app that could work, the device stay in logo mode when I tried to downgrade it or reflash it..
Click to expand...
Click to collapse
I can't downgrade to 6.0 It says that my package it;s not compatible with my phone... I'm from Romania, but I have a VNS-L31C432B336 that it's registered in UK..
Hello there
Do you have access to TWRP or Revolutionary recovery? If so, you can check on google for "Huawei P9 Lite oeminfo", downloadit, flash zip via recovery(TWRP or Revolutionary), then try to force update you phone by holding all 3 buttons when phone is booting up, make sure that you have update.app in dload folder on sdcard.
DON'T FORGET TO SAVE YOUR BOOTLOADER UNLOCK CODE!!!
Kcetin20 said:
1 : http://download-c1.huawei.com/download/downloadCenter?downloadId=93788&version=373426&siteCode=nl
2 : http://download-c1.huawei.com/download/downloadCenter?downloadId=93803&version=373438&siteCode=nl
put those in dload map at sdcard...first make the small file after let him reboot and flash the 1.68gb file also in erecovery.
Click to expand...
Click to collapse
I was in Nougart on test keys, so i downloaded the first file, installed it and it restarted my phone. I set everything back up and checked I was still on test keys.
Do I have to flash the larger second file as well?
djbeatmaker said:
yeah my device is the VNS-L23C605B120 and i can´t find any update.app that could work, the device stay in logo mode when I tried to downgrade it or reflash it..
Click to expand...
Click to collapse
Hi bro!
Could you find something for your version? I also have the same model and I have a hard brick, could you solve your mistake?
Could you give me the official firmware link for this model (VNS-L23C605B120) please?
THAANKS!!
well, here is some you can try, find a downgrade update.app, later re flash it with the according restore update.app, it will end to 97% but it`ll work enough to start the cellphone and install the custom twrp recovery and make an good install.
Chippie_83_ said:
I managed to install the first file from the rollback tutorial... It said it was succesfull but now I'm still stuck seeing the Huawei logo... So I guess it didn't work
Edit: Managed to get in! But it says my version is NRD90M test-keys....
Click to expand...
Click to collapse
Hi I'm on your same version NRD90M and I also know that now you solved the problem but, the way you solved it doesn't work for me, I installed the first file but the second one failed... Can you please help Me?
Chippie_83_ said:
I managed to install the first file from the rollback tutorial... It said it was succesfull but now I'm still stuck seeing the Huawei logo... So I guess it didn't work
Edit: Managed to get in! But it says my version is NRD90M test-keys....
Click to expand...
Click to collapse
Hello, could you please tell me how you managed to get in.! my VNS-L21 has stuck on the Huawei logo.. and can't do nothing. I can't even turn my phone off. :good:
willreth21 said:
hello, could you please tell me how you managed to get in.! My vns-l21 has stuck on the huawei logo.. And can't do nothing. I can't even turn my phone off. :good:
Click to expand...
Click to collapse
press vol down and power button for some time. It will work. I have the same model and inhave managed to get out of several bricks by using this method
Hola a todos.alguien logro pasar del wifi+ sin la opcion de DC PHOENIX??
Detailed guide to downgrade from Nougat (unofficial or beta) to Official Marshmallow.
Saw many users struggling with unofficial Nougat update (via firmware finder) and were looking for downgrade procedure (on Facebook, honor community and on XDA) to go back to stable and official Marshmallow version from Beta/stable stock Nougat version. Below method is thoroughly checked personally by me for more than 5-6 times and I am writing this detailed step by step guide for downgrade.
Prerequisites-
Non-rooted phone (no changes to the system partition and bootloader made)
Make sure you are running the Nougat version B3XX (not custom ROM)
Make sure you are on stock recovery.
Make sure to take full backup of the data and apps as this downgrade process will erase all your data and will wipe the internal memory. (you can use this backup to restore your contacts, call/sms logs, app with data, your home screen layout etc.)
Make sure your device is charged to at least 50%.
SD card with minimum 4 GB free space (as main product package is around 2.77 GB in size)
Let’s start the process.
Updating product transfer package-
Download the update.app product transfer package for Honor 5C device from link https://goo.gl/KYZ3Pd
Create a folder dload in the root directory of your SD card.
Copy the update.app package which you just downloaded to dload folder.
Power off the phone.
Press volume up+volume down keys and simultaneously press power button.
Your phone will automatically detect the package and will start the update process.
Once the update process is successful, you will get a message as update was successful and your phone will restart automatically
.
Updating the main product package (Marshmallow B151 package)
Delete the old dload folder from SD card. (which had transfer package file of size 69 MB) - Do not forget to delete this folder or rename it or else the same file will be keep on flashing again and again.
Download the full version package from the link https://goo.gl/8d4s73
Copy the entire folder with UPDTAE.APP file in it to root directory of SD card.
Power off the phone.
Press volume up+volume down keys and simultaneously press power button.
Your phone will automatically detect the package and will start the update process.
Once the update process is successful, you will get a message as update was successful and your phone will restart automatically.
During restart, phone will verify the system image.
This verification and 1st boot may take upto 4-5 minutes so do not panic.
Once the phone is booted and up, it will ask for the initial setup like language, wifi, agreement etc.
Validation-
Once the phone is setup, go to setting—about phone—check the android version and build number to verify you are running on Android Marshmallow version.
NOTE:
This process will completely erase your data, so make sure to have a backup before proceeding further.
This process will downgrade your phone to Android marshmallow, EMUI 4.1.2 and B151.
I have personally tested this method and downgraded my phone to marshmallow without any issue (10+ times)
If you follow the guide correctly, you should not face any issue with condition that all the Prerequisites are met and you followed the steps in order.
If anyone still have any doubt or a slight hesitation, please feel free to ask in the comment before proceeding and risking your phone.
I have a doubt
Hi shashank,
I am using honor 5c Indian version running in naugat. My phone is very slow. If I downgrade to Android 6.0 will get speed??. Because my handset was smooth when it was marshmallow......
Robinbabyrobin said:
Hi shashank,
I am using honor 5c Indian version running in naugat. My phone is very slow. If I downgrade to Android 6.0 will get speed??. Because my handset was smooth when it was marshmallow......
Click to expand...
Click to collapse
can try and see buddy. I too felt MM was bit faster sometimes compared to Nougat.
Will this work with NEM-L21 too?
einleger said:
Will this work with NEM-L21 too?
Click to expand...
Click to collapse
Yes but rollback package and firmware will be different.
roll back
shashank1320 said:
Yes but rollback package and firmware will be different.
Click to expand...
Click to collapse
i cant find huawei GT3 nmo L31 rollback file.can you help me?
i installed another roll back file, now i cant downgrade my phone from this step to android 6
can you give me gt3 L31 rollback?
how to upgrade to nougat back?
FAIRUZLYNNZAN said:
how to upgrade to nougat back?
Click to expand...
Click to collapse
Regular OTA or dload method. But i would avoid dload as i personally have done it more than 2 times on 5C but one or the other things missing and couod not get it working.
shashank1320 said:
Regular OTA or dload method. But i would avoid dload as i personally have done it more than 2 times on 5C but one or the other things missing and couod not get it working.
Click to expand...
Click to collapse
I'm cannot upgrade using OTA....it say no updates
FAIRUZLYNNZAN said:
I'm cannot upgrade using OTA....it say no updates
Click to expand...
Click to collapse
I had same issue and uploaded via FF or dload and faced issue. I am living with MM.
I even tried with Huawei directly with IMEI but they were unable to figure out the problem
shashank1320 said:
I had same issue and uploaded via FF or dload and faced issue. I am living with MM.
I even tried with Huawei directly with IMEI but they were unable to figure out the problem
Click to expand...
Click to collapse
so right now cannot upgrade and stuck with mm??
FAIRUZLYNNZAN said:
so right now cannot upgrade and stuck with mm??
Click to expand...
Click to collapse
Did you get updates earlier for Nougat?
Drive sais file not exist
emapego78 said:
Drive sais file not exist
Click to expand...
Click to collapse
Let me check and update the link
shashank1320 said:
Let me check and update the link
Click to expand...
Click to collapse
I have the same problem
ProXImMorTaL said:
I have the same problem
Click to expand...
Click to collapse
its already there on the same link. just download it.
https://drive.google.com/uc?authuser=0&id=0B42SZzKuosucaWhWcjg2aWxTd28&export=download
Team,
I've got a problem. My brother got the phone locked on NRD90M test-keys and can't roll back. I've tried getting into the SD card the UDPATE.APP for my model (VNS-L22) but when doing the three key method it shows an error message with something like "incompatibility with current software" and it just gives me the option to reboot the device. I have access to the device as it boots but things like camera stopped working (it's been a while since he did that and he just told me)
I've tried with the "Huawei Recovery Updater thread" here but I don't know if I am doing something wrong or what but it does not work.
Reading a bit more it seems I've to unlock bootloader and do a bunch of things, just wondering what do you think is the best approach or how can I get back to stock ROM, so we he can get OTA updates and have the device working without a problem.
He did this by using the Firmware Finder app from play store, so I guess he did an update and got the device on that state.
Device details:
EMUI Version: 5.0
Android Version: 7.0
Huawei P9 lite
Model: Huawei VNS-L22
I appreciate all the help you could provide,
Thanks!
danag07 said:
Team,
I've got a problem. My brother got the phone locked on NRD90M test-keys and can't roll back. I've tried getting into the SD card the UDPATE.APP for my model (VNS-L22) but when doing the three key method it shows an error message with something like "incompatibility with current software" and it just gives me the option to reboot the device. I have access to the device as it boots but things like camera stopped working (it's been a while since he did that and he just told me)
I've tried with the "Huawei Recovery Updater thread" here but I don't know if I am doing something wrong or what but it does not work.
Reading a bit more it seems I've to unlock bootloader and do a bunch of things, just wondering what do you think is the best approach or how can I get back to stock ROM, so we he can get OTA updates and have the device working without a problem.
He did this by using the Firmware Finder app from play store, so I guess he did an update and got the device on that state.
Device details:
EMUI Version: 5.0
Android Version: 7.0
Huawei P9 lite
Model: Huawei VNS-L22
I appreciate all the help you could provide,
Thanks!
Click to expand...
Click to collapse
Hello,
if you remember exactly the complete firmware your device were on
before been stucked on NRD90M test-keys, maybe using Firmware Finder ( FF )
you'll be able to force the update to a newer and working version..
( ex. mine was VNS-L31C432B381 and updated to B415 )
The other method is most complicated...
Unlock the bootloader, flash a custom recovery and use
Huawei Recovery Updater in order to reflash your stock rom.
Then you should use FF too to make an update and correctly
relock the bootloader.
Is you'll use those awesome apps don't forget to thank the developers.
Cheers
Dadditz said:
Hello,
if you remember exactly the complete firmware your device were on
before been stucked on NRD90M test-keys, maybe using Firmware Finder ( FF )
you'll be able to force the update to a newer and working version..
( ex. mine was VNS-L31C432B381 and updated to B415 )
The other method is most complicated...
Unlock the bootloader, flash a custom recovery and use
Huawei Recovery Updater in order to reflash your stock rom.
Then you should use FF too to make an update and correctly
relock the bootloader.
Is you'll use those awesome apps don't forget to thank the developers.
Cheers
Click to expand...
Click to collapse
Yes I do, actually I just realized the one I could find here wasn't the same I had before so maybe I will try that one. I tried firmware finder from the app but it wasn't working properly, when downloading the FULL OTA files it started crashing and then I was not able to proceed with the "downgrade" now i've used the FF for PC and downloaded the files from FULL OTA, however there are 3 files. I am not sure what to put into the dload folder.
These are the files:
update.zip
update_data_full_hw_normal.zip
update_data_full_ice_cr.zip
As per my understanding I should place only the files from "update.zip" right? I also saw a few comments on a video that said put all content from all three files into the dload folder.
If you happen to know the answer I will appreciate it!
Hello,
I'm also stuck in this rom... But in my case I went from a custom ROM to it. But it blocked my bootloader, etc...
And I forgot my bootloader code
Now I have to unlock it and I will use DC-Unlocked but when I dial this number: *#*#2846579#*#* in this ROM it doesn't show anything!!! So I can't open Project Menu...
What can I do?
Thanks
danag07 said:
Yes I do,
actually I just realized the one I could find here wasn't the same I had before so maybe I will try that one. I tried firmware finder from the app but it wasn't working properly, when downloading the FULL OTA files it started crashing and then I was not able to proceed with the "downgrade" now i've used the FF for PC and downloaded the files from FULL OTA, however there are 3 files. I am not sure what to put into the dload folder.
These are the files:
update.zip
update_data_full_hw_normal.zip
update_data_full_ice_cr.zip
As per my understanding I should place only the files from "update.zip" right? I also saw a few comments on a video that said put all content from all three files into the dload folder.
If you happen to know the answer I will appreciate it!
Click to expand...
Click to collapse
Dude,
you cannot use DLOAD aka three buttons method
on nougat ( android 7 ) 'cause it wont work.
As i wrote you should know exactly the firmware your device were before the softbrick.
Getting 'nrd90m - test keys' firmware probably mean you already tried to use a wrong firmware.
I don't know whic firmware you downloaded, but i can assure you without that correct no methods will work.
As you can see in the attachment exists many custs ( C185, C569. C576, C635, C636, etc... )
and firmware ( Bxxx ) that indicate the region/brand were you live or where the device was sold when you bought it and if single or dual sim.
Without those info become a lot complicated bring back your device in an working state.
The last chance should be a rebrand but you need some files like OEMinfo zip but ever first you should unlock the bootloader, flash a custom recovery and use HWOTA method, but the risk
to completely brick the device is really high.
Example of a firmware : VNS-L31C432B415
VNS ( venus is the name of the device )
L31 ( is the version of the device )
C432 ( is the cust that indicate the region where was sold )
B415 ( is the running firmware/security patch on the device )
You had VNS-L22 C??? B???
paniczzz said:
Hello,
I'm also stuck in this rom... But in my case I went from a custom ROM to it. But it blocked my bootloader, etc...
And I forgot my bootloader code
Now I have to unlock it and I will use DC-Unlocked but when I dial this number: *#*#2846579#*#* in this ROM it doesn't show anything!!! So I can't open Project Menu...
What can I do?
Thanks
Click to expand...
Click to collapse
Dude,
before attempting to unlock again the bootloader
you should try to force the update with Firmware Finder.
What was the firmware you were on before flashing your custom rom ?
Which custom firmware you were on ?
How you gone back to stock ?
Which stock firmware you used to go stock ?
Dadditz said:
Dude,
you cannot use DLOAD aka three buttons method
on nougat ( android 7 ) 'cause it wont work.
As i wrote you should know exactly the firmware your device were before the softbrick.
Getting 'nrd90m - test keys' firmware probably mean you already tried to use a wrong firmware.
I don't know whic firmware you downloaded, but i can assure you without that correct no methods will work.
As you can see in the attachment exists many custs ( C185, C569. C576, C635, C636, etc... )
and firmware ( Bxxx ) that indicate the region/brand were you live or where the device was sold when you bought it and if single or dual sim.
Without those info become a lot complicated bring back your device in an working state.
The last chance should be a rebrand but you need some files like OEMinfo zip but ever first you should unlock the bootloader, flash a custom recovery and use HWOTA method, but the risk
to completely brick the device is really high.
Example of a firmware : VNS-L31C432B415
VNS ( venus is the name of the device )
L31 ( is the version of the device )
C432 ( is the cust that indicate the region where was sold )
B415 ( is the running firmware/security patch on the device )
You had VNS-L22 C??? B???
Click to expand...
Click to collapse
So the firmware I had before doing that was VNS-L22C106B150.
What should I do with that if the android app is not working? I mean... I tried doing it with firmware finder and it didn't work, used proxy thing, dns thing, downloaded the files (multiple errors, files corrupted) and it is not my internet connection, it's the app. I did downloaded the files on the Windows app
danag07 said:
So the firmware I had before doing that was VNS-L22C106B150.
What should I do with that if the android app is not working? I mean... I tried doing it with firmware finder and it didn't work, used proxy thing, dns thing, downloaded the files (multiple errors, files corrupted) and it is not my internet connection, it's the app. I did downloaded the files on the Windows app
Click to expand...
Click to collapse
Ok, if you sure your firmware are L22C106, things aren't so good.
Cannot make an update, can make a downgrade but you need the correct rollback package
and i don't know were you can find it, but in any case you couldn't re-upgrade to android 7.
Checking in the FF PC 's app, as you can see, no nougat
versions of this firmware are present. Which version you downloaded before ?
If you are really sure about that firmware, you have only a possibility, which is
make a rebrand but it's a bit complicated and really dangerous.
Choise remain yours, you can find some guides how to do a rebrand, just search
in the p9 lite threads.
Cheers