Please help,
I've once flashed the stock rom to my Lenovo device because it had stopped working and was in a boot loop. That was successful but then it broke again. Then I tried doing the same thing again, but this time the SP Flash Tool gets stuck at 32-35% and then gives me the same error every time. I always get error 4008 and now when I try turning it on it prompts the Lenovo logo screen but in the corner it shows => TOOL DL image Fail.
Nwott said:
Please help,
I've once flashed the stock rom to my Lenovo device because it had stopped working and was in a boot loop. That was successful but then it broke again. Then I tried doing the same thing again, but this time the SP Flash Tool gets stuck at 32-35% and then gives me the same error every time. I always get error 4008 and now when I try turning it on it prompts the Lenovo logo screen but in the corner it shows => TOOL DL image Fail.
Click to expand...
Click to collapse
Having the same problem I have followed all the fix in youtube but none of them fix it, i hope someone will help us to get rid with this.
Related
Hi,
Boot looping problem with my m2.
Was flashed
20111012-0056-Nightly-v1.0
(previously was on MIUI 1.10.8, before that was the MS2Ginger rc).
With that version of CM7, the phone will drop call while the battery low dialog pops up sometime. Maybe the cpu vel is too low.
Also when last time this happened, the phone shutdown itself and now it's boot looping.
Some time it can boot over the bootmenu (can see the blue/green led), but after that stuck at the boot logo or boot into black screen.
few time it can boot into Android.
Most of the time it can't even boot over bootmenu, just stuck at the boot logo.
Reflashed and wiped everything and it doesn't help.
Reflashed MIUI on to it and same problem.
Tried to get the logcat running but it only says waiting for device,
though I plugged the phone but got nothing on the command line.
//===update
using RSD Lite to flash the phone will fail because
"error getting subscriber unit"
or "error erasing subscriber unit"
Any suggestion?
Regards,
skygunner said:
Hi,
Boot looping problem with my m2.
Was flashed
20111012-0056-Nightly-v1.0
(previously was on MIUI 1.10.8, before that was the MS2Ginger rc).
With that version of CM7, the phone will drop call while the battery low dialog pops up sometime. Maybe the cpu vel is too low.
Also when last time this happened, the phone shutdown itself and now it's boot looping.
Some time it can boot over the bootmenu (can see the blue/green led), but after that stuck at the boot logo or boot into black screen.
few time it can boot into Android.
Most of the time it can't even boot over bootmenu, just stuck at the boot logo.
Reflashed and wiped everything and it doesn't help.
Reflashed MIUI on to it and same problem.
Tried to get the logcat running but it only says waiting for device,
though I plugged the phone but got nothing on the command line.
Any suggestion?
Regards,
Click to expand...
Click to collapse
Have you tried flashing the stock .sbf via RSD Lite?
Yes was trying that. But the falshing doesn't seem to be completed sucessful.
Stuck at sw update in progress...
RSDlite 4.9 shows error getting/erasing subscriber unit?
It seems like the phone has been disconnected before the flash completes
See this thread and particulary this :
EVEALEX62 said:
It's good for me !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Yououououououououououou !!!!!!!!!!
I don't know if all this is nécessary but it's what I have doing .....
1rst, I have full charge my battery !
I have do this (all step 1 to 11 because "boot up the phone manually" ) with the sbf 2.2.2 officiel but modify whith this post :
The first time don't work but the second time it's good !!!!
So BIG thanks to all people have help (pat972, Atomos33,Emacore,dangpzanco,will5, motodoido) , but especially to r2beta0 et Mikevhl
Click to expand...
Click to collapse
Hey guys,
My T-mobile G2 (CloudyG3 before it got bricked) is currently stuck in download mode, and I mean that's the only thing it can boot into. Vol - and power gets me into factory reset screen, but when I go through the steps it just ends up booting back into download mode.
I'm trying to flash stock .KDZ files with LG Flash Tool 2014, but to no avail. I have tried all of them from http://storagecow.eu/index.php?dir=Xda%2FLG+G2%2FStock%2FT-Mobile+G2%2F, but a " *version #* - NOT SUPPORT" message shows up everytime in the box.
I have also tried the other flash tool, the one that uses .dll and .tot, and that one also gives me an error before the automatic flash process starts.
Basically, download mode progress bar has never budged a single percent in all my numerous tries.
Any advice is greatly appreciated
bump
I am recently stuck in a pickle. I recently rooted my Xiaomi Redmi Note. Things were fantastic till I noticed I had an update for SuperSU which is a Superuser access management tool. I updated and a message came up asking if I should start normally or if I should start in TWRP. I accidentally hit TWRP and I currently don't have any TWRP to boot in recovery mode. No when I turn on my phone it shows the emblem then the screens backlight is on but it is all black. I have tried booting in recovery mode but it does the same thing. If anyone could help it would really make my day. Thanks.
mikethehuman__ said:
I am recently stuck in a pickle. I recently rooted my Xiaomi Redmi Note. Things were fantastic till I noticed I had an update for SuperSU which is a Superuser access management tool. I updated and a message came up asking if I should start normally or if I should start in TWRP. I accidentally hit TWRP and I currently don't have any TWRP to boot in recovery mode. No when I turn on my phone it shows the emblem then the screens backlight is on but it is all black. I have tried booting in recovery mode but it does the same thing. If anyone could help it would really make my day. Thanks.
Click to expand...
Click to collapse
same problem here, my phone stuck after mi logo,and blank after all
tried to go into fastboot mode,but it cant enter, tried to connect to pc,but it says cant recognize the phone (already install all driver that needed after all)
pls help
frontzion said:
same problem here, my phone stuck after mi logo,and blank after all
tried to go into fastboot mode,but it cant enter, tried to connect to pc,but it says cant recognize the phone (already install all driver that needed after all)
pls help
Click to expand...
Click to collapse
I have recently found out the phone is in "hard brick". My friend is looking into further research about the issue. I'll let you know if we figure something out!
well my tablet was working fine but after sometimes it began to freez on boot screen , i tried every method and i finished always by trying to reset the tablet and lose all my data on it , untill one day it froze , and even reset wouldn't solve the prob , so i tried flashing the rom , but the problem is i followed every step i found on lenovo site but when i tried to flash the rom it reachs 31% and it stops and the flash tool pop up saying "s_da_sdmmc_write_failed(3149) " i tryed other version of sp flashtool the latest one , and it reaches 31% and popup "sft download fail 4008 " and when i press the power button it shows lenovo screen with "tool dl image fail'.... plz someone give me help i tried everything to solve the problem every solution on the web but i couldn't make a thing plz help
Same problem here... have you solved it? If yes how?
Thanks
1 year old S8 unlocked (SM-G950U1), stock software. Was running slow today, so I rebooted, and it now crashes almost instantly after showing "galaxy s8" on the boot screen, and just sits there with a slow blinking blue light.
Hard reboot just does the same thing. It won't go into recovery mode. I CAN get into software upload, so I tried flashing stock ROM back with Odin, but that fails, and now I get the "an error has occurred while updating the device software" error. Samsung Smart Switch isn't recognizing it as a supported device.
Can't get TWRP to install because FRP lock is on (and since I can't boot the phone, I don't think I can disable this).
So, am I stuck with a fancy brick?
8
abt12 said:
1 year old S8 unlocked (SM-G950U1), stock software. Was running slow today, so I rebooted, and it now crashes almost instantly after showing "galaxy s8" on the boot screen, and just sits there with a slow blinking blue light.
Hard reboot just does the same thing. It won't go into recovery mode. I CAN get into software upload, so I tried flashing stock ROM back with Odin, but that fails, and now I get the "an error has occurred while updating the device software" error. Samsung Smart Switch isn't recognizing it as a supported device.
Can't get TWRP to install because FRP lock is on (and since I can't boot the phone, I don't think I can disable this).
So, am I stuck with a fancy brick?
Click to expand...
Click to collapse
No twrp for this device. You are probably flashing the wrong revision firmware. You need to flash equal to or greater than what's on the device
Also that same screen of error you can flash in Odin