IMEI Repair For LYF Water 8 - Android Software Development

Great Thanks to - "Inderpreet Singh Bhangu" for providing the Qcn file and the flashing process!
So after flashing the firmware, the IMEI disappears or vanished. So today I am telling you the method to recover the IMEI
1) Download the qcn file provided by me with this thread. Copy it to computer.
2) Download the QPST application for windows via the internet. Run the setup and install QPST.
3) Connect the phone to the pc via usb cable.
4) Go to the desktop and Search for "QPST configuration" and run it.
5) If your phone is correctly connected then in the application in the bottom " 1 Phones" this will be displayed.
6) Go to "Start Clients" option and then click on "Software Download". New window will be displayed. Then click on restore.
7) Click on Browse and then go to the file which i provided to you (extract it earlier). Now in that extracted file change the "file type" to ".qcn" and then choose the qcn file.
8) Unlock you phone and click on start button. After that your phone will automatically reboot and then you IMEI is restored.
Enjoy!!:good:

"Link of Qcn Flie"

good method to restore imei back to lyf water 8
nr10prashant said:
Great Thanks to - "Inderpreet Singh Bhangu" for providing the Qcn file and the flashing process!
So after flashing the firmware, the IMEI disappears or vanished. So today I am telling you the method to recover the IMEI
1) Download the qcn file provided by me with this thread. Copy it to computer.
2) Download the QPST application for windows via the internet. Run the setup and install QPST.
3) Connect the phone to the pc via usb cable.
4) Go to the desktop and Search for "QPST configuration" and run it.
5) If your phone is correctly connected then in the application in the bottom " 1 Phones" this will be displayed.
6) Go to "Start Clients" option and then click on "Software Download". New window will be displayed. Then click on restore.
7) Click on Browse and then go to the file which i provided to you (extract it earlier). Now in that extracted file change the "file type" to ".qcn" and then choose the qcn file.
8) Unlock you phone and click on start button. After that your phone will automatically reboot and then you IMEI is restored.
Enjoy!!:good:
Click to expand...
Click to collapse
.there is a new method to restore imei to android via root is that works

nr10prashant said:
Great Thanks to - "Inderpreet Singh Bhangu" for providing the Qcn file and the flashing process!
So after flashing the firmware, the IMEI disappears or vanished. So today I am telling you the method to recover the IMEI
1) Download the qcn file provided by me with this thread. Copy it to computer.
2) Download the QPST application for windows via the internet. Run the setup and install QPST.
3) Connect the phone to the pc via usb cable.
4) Go to the desktop and Search for "QPST configuration" and run it.
5) If your phone is correctly connected then in the application in the bottom " 1 Phones" this will be displayed.
6) Go to "Start Clients" option and then click on "Software Download". New window will be displayed. Then click on restore.
7) Click on Browse and then go to the file which i provided to you (extract it earlier). Now in that extracted file change the "file type" to ".qcn" and then choose the qcn file.
8) Unlock you phone and click on start button. After that your phone will automatically reboot and then you IMEI is restored.
Enjoy!!:good:
Click to expand...
Click to collapse
Inderpreets said:
.there is a new method to restore imei to android via root is that works
Click to expand...
Click to collapse
Please share about details how to unlock phones

Jscarder said:
Please share about details how to unlock phones
Click to expand...
Click to collapse
What do you want to say i didn't get it

Related

[Q] IMEI Backup and Restore

I am totally new to flashing. I just backed up my IMEI (created a rfs file using Terminal Emulator and just copied of the efs folder to my sdcard).
My question is that suppose I happen to lose my IMEI on flashing, can I recover it by simply copying the contents of the backed up efs folder to the original folder using root explorer?
yeah, its as simple as that
manish19 said:
I am totally new to flashing. I just backed up my IMEI (created a rfs file using Terminal Emulator and just copied of the efs folder to my sdcard).
My question is that suppose I happen to lose my IMEI on flashing, can I recover it by simply copying the contents of the backed up efs folder to the original folder using root explorer?
Click to expand...
Click to collapse
U can also flash it with Odin even without rooting.
devc0ol said:
U can also flash it with Odin even without rooting.
Click to expand...
Click to collapse
Thanks but I am not sure how I would do that. I went through the IMEI backup and restore thread. So is this what I have to do?
1. Select the .ops file.
2. In the efs section, add the file and not select the one package option.
3. Connect my phone in download mode
4. Flash
Is this method correct?
manish19 said:
Thanks but I am not sure how I would do that. I went through the IMEI backup and restore thread. So is this what I have to do?
1. Select the .ops file.
2. In the efs section, add the file and not select the one package option.
3. Connect my phone in download mode
4. Flash
Is this method correct?
Click to expand...
Click to collapse
Yup thats the way the say it to do.
But i think u have to change the efs folder into a .tar file to flash it.
DO IT AT UR OWN RISK!
manish19 said:
Thanks but I am not sure how I would do that. I went through the IMEI backup and restore thread. So is this what I have to do?
1. Select the .ops file.
2. In the efs section, add the file and not select the one package option.
3. Connect my phone in download mode
4. Flash
Is this method correct?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=888193
Have a look at this Thread also..
Gives the basics of different ways of mounting the efs partion.
Its safe to use the ADB method i guess.
But flashing with efs.tar file should work.

[Q] How to repair IMEI on I9300I. [Q]

Hey folks,
I have GT-I9300I S3 Neo Duos. I brought it from Russia and i moved to India i don't have to unlock the device as its working without any problem for last 2years.
Is there anyway to repair the IMEI of my device a day before it was ok .
Device was lagging so i Restore to its original setting & after restart my device IMEI is gone for good.
Thanks in advance
Search for imei changer on playstore...
There r Xposed modules also to change write a new imei number
sahilkhan9557 said:
Search for imei changer on playstore...
There r Xposed modules also to change write a new imei number
Click to expand...
Click to collapse
actually i tried to put it via xposed but nothing worked or may be i not doing it the right way.
both of my sim are not showing.
if u can tell me the right procedure to work on Xposed.
thanks
mukulkas143 said:
actually i tried to put it via xposed but nothing worked or may be i not doing it the right way.
both of my sim are not showing.
if u can tell me the right procedure to work on Xposed.
thanks
Click to expand...
Click to collapse
U need a root explorer app and of course root! Also
The steps are little bit tricky...
Step 1
Make a copy of your EFS folder on your sdcard using root explorer and then backup to your computer [ to have another copy if you have to format the sd card sometime ]
Step 2
Delete the EFS folder (Make sure you have the BACKUP in a safe place as mentioned in STEP 1) from the root of your phone using root explorer.
Step 3
Do a Factory Reset. After that, navigate to the root directory of your phone.
Step 4
Go to EFS folder using root explorer; delete “nv_data.bin” and the “nv_data.bin.md5” files.
Step 5
Go to your backed up EFS folder on your sd card, copy the “IMEI” folder to the EFS folder at the root of your phone, then again go to the backed up EFS folder in your sd card and copy the ” .nv_data ” file to your EFS folder at the root of your phone using root explorer.
NOTE: the dot in first of nv_data is not a mistake, copy the “.nv_data” file.
Step 6
Make another copy of the “.nv_data” file in EFS folder in your phone, so you would have 2 copies of “.nv_data” in EFS folder.
Step 7
Rename one of “.nv_data” files to “nv_data.bin” and another one to “nv_data.bin.bak”
Step 8
Open Command Prompt in your Windows PC (Terminal for all you Linux users) at the ADB tool path, or run Terminal at your phone enter these commands:
adb shell (use this command if you use ADB, if you’re using terminal, skip it )
su ( When the option comes up allow the superuser to access the file system by clicking “grant” on the phone screen )
chown 1001:radio /efs/nv_data.bin
Step 9
Reset your phone…. after that you have your original IMEI. you can check your IMEI by dialling *#06#.
You have successfully recovered
It seems to me the nv_data files are not present in the efs folder.
I was just going through steps but I didn't find these files.
I have backed up the files before flashing the phone using the twrp & Samsung tool box. But in both of the backups there is no nv_data files available. N currently in efs folder there is no no_data file.
the dot in front of .nv_data means they are hidden. you probably won't see them
mukulkas143 said:
I have backed up the files before flashing the phone using the twrp & Samsung tool box. But in both of the backups there is no nv_data files available. N currently in efs folder there is no no_data file.
Click to expand...
Click to collapse
Try to Enable "show hidden folders" first
sahilkhan9557 said:
Try to Enable "show hidden folders" first
Click to expand...
Click to collapse
yeah i have done that but still no good as there is no nv_data as well as no bak file.
Now i have no clue what to do next....
Tried xposed module & Imei changer by xposed.
Now both the sims showing the same IMEI n both are showing no service.
can anyone help...
Thanks in advance.
you could try flashing a fimware for india. maybe that could help.

Backup and restore process of NVRAM(IMEI), 100% safe

Hi friends today i am going to tell u how to backup and restore NVRAM(imei)
So many ppl facing null imei problem after full format+flash,
Tools
Notepad++ mod edit - link removed
Sp flash tool: mod edit - link removed
Drivers mod edit - link removed
Scatter text file: you can find this in your firmaware
How to Backup
1. open Sp flash tool, then Select readback. (before select read back make sure DA DL all with checksumselected)
2. Press Add, An address line will be Added.
3. Double click on that line.
4. Choose location and set file name as "nvram.img" then click save, a window will open.
now open scatter.text file with note pad++
click on search then select find or just use shortcut Ctrl+F
search for nvram, you will find nvram partition details there.
note down those details(physical_start_addr: and partition_size
5. in that window you have to enter these values as follow
in start address you have to enter physical_start_addr
in Lenght you have to enter partition_size:
After entering these values click on ok
6. Then click on Read back button
7. then connect your mobile to your pc with out battery.
NVRAM.img file will be saved.
How to restore
1. put scatter text file and nvram.img filein same folder.
2. open sp flash tool.
3. select on scatter loading>> select this scatter file
4.Tick nvram only
5. select download only and click Download button
then connect your mobile to pc without battery.
green tick will be appear.
If NVRAM not showing in scatter, then open scatter text with notepad++ and search nvram,change this option is_download: false from true
If nv ram file not selected with scatter text file, just double click on nvramfile in spflash tool, check below image
Don't blame be if something went wrong,
i fount this process after facing lots of trouble and patience.
Thumbsup.
-=-=-
mod edit - thread closed

Need Cert File for SM-S550TL - Imei is zeroed out

If someone could provide me with this file, it would be very appreciated!
Try
in TWRP select "Mount" then tick efs, go back then select "Advanced" "File Manager" open efs folder select the check mark icon on lower right delete, then reboot phone.
If this works and you get network reboot into TWRP and backup efs.
hydroman202 said:
If someone could provide me with this file, it would be very appreciated!
Click to expand...
Click to collapse
May you please help me cert file for Samsung sm-s550tl or its offictial firmware

HwOTA for Huawei P9 Lite

HwOTA for Huawei P9 Lite​1. On the phone, make a backup of all data (since during the upgrade all data will be erased). This is an obligatory condition.
2. Unlock your bootloader: (There´s no way around it (unfortnuately), but after the procedure your device will be locked again, so don´t worry!). The device will make a factory reset, so once again, BACKUP your files!!!!!!!!!!
3. Enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
4. You must download three zip-archives with a full "Full OTA" firmware on which you want to flash (If you look through in the FF (FirmwareFinder), you see there are 4 archives for China and 3 for other locations. You must to download for the version what model and location you will have after the firmware);
5. Add the downloaded files to the folder "HWOTA\Update" and run the .cmd file, it will rename them automatically according to the template:
- update_data_full_public.zip to update_data_public.zip
- update_full_....zip to update_all_hw.zip
- update.zip don't rename
6. After run the universal batch file update.bat in the "HWOTA" folder, which will provide an opportunity to choose the required work option (change firmware/rebranding (change location)). FOLLOWING INSTRUCTIONS ON THE SCREEN OF THE MONITOR - the entire process is accompanied by prompts.
At the end of the process, everything should work fine... Be prepared, the bootloader will be locked after changing the location or firmware as a FullOTA.
7. If suddenly it turned out "bootloop" - go into the stock Recovery and make wipe.
PS: To change the firmware using the SD card, you need to create a folder "HWOTA" on the SD card and copy three firmware archives with the changed names (see above). In the batch file select item 1 "SDCard HWOTA directory"
HwOTA.zip
If you like my work, you can thank TeamMT PayPal
PPS: Sorry for my English!!!
vovan1982 said:
HwOTA for Huawei P9 Lite​1. On the phone, make a backup of all data (since during the upgrade all data will be erased). This is an obligatory condition.
2. Unlock your bootloader: (There´s no way around it (unfortnuately), but after the procedure your device will be locked again, so don´t worry!). The device will make a factory reset, so once again, BACKUP your files!!!!!!!!!!
3. Enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
4. You must download three zip-archives with a full "Full OTA" firmware on which you want to flash (If you look through in the FF (FirmwareFinder), you see there are 4 archives for China and 3 for other locations. You must to download for the version what model and location you will have after the firmware);
5. Add the downloaded files to the folder "HWOTA\Update" and run the .cmd file, it will rename them automatically according to the template:
- update_data_full_public.zip to update_data_public.zip
- update_full_....zip to update_all_hw.zip
- update.zip don't rename
6. After run the universal batch file update.bat in the "HWOTA" folder, which will provide an opportunity to choose the required work option (change firmware/rebranding (change location)). FOLLOWING INSTRUCTIONS ON THE SCREEN OF THE MONITOR - the entire process is accompanied by prompts.
At the end of the process, everything should work fine... Be prepared, the bootloader will be locked after changing the location or firmware as a FullOTA.
7. If suddenly it turned out "bootloop" - go into the stock Recovery and make wipe.
PS: To change the firmware using the SD card, you need to create a folder "HWOTA" on the SD card and copy three firmware archives with the changed names (see above). In the batch file select item 1 "SDCard HWOTA directory"
HwOTA.zip
If you like my work, you can thank TeamMT PayPal
PPS: Sorry for my English!!!
Click to expand...
Click to collapse
Hi, ", it will rename them automatically according to the template:
- update_data_full_public.zip to update_data_public.zip
- update_full_....zip to update_all_hw.zip" - doesn't work. Is it possible to manually rename files?
Edit: It was my stupidity , everything works fine, thank you !!!
where do I download the firmware files by the way?
there are lots of errors,
there are conflicts in folder names and script paths
Error
there are errors
it's can't run
can you fix it

Categories

Resources