Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards
Hi,
same method as old models :
Check phone version / exact sub-model, here are three hardware versions of Y300:
1.Huawei Y300 (T8833) - TD-SCDMA / China Mobile
2.Huawei Y300-0000 (U8833) - WCDMA China Unicom
3.Huawei Y300-0100 (U8833) - WCDMA International
check version (product ID) with this code : *#*#1357946#*#* , dial button (green)
there is international version ROM - Y300-0100 at Huawei site, you probably downloaded it ...
- put "dload" folder from archive on formatted micro-sd card's ROOT
- put micro-sd card into phone
- start phone in download mode = Press the VOLUME UP and VOLUME DOWN key, and then press the
POWER key to power on the phone and enter the Software Upgrade Mode
(taken from upgrade manual - which is found in archive, pdf ... )
- wait for finish ...
p.s. if not accepting firmware - means it's not international version ....
b.r.
Alex
If you have "faild" at step 2/2 , you must "zero" your imei > flash rom > restore imei.
what is the latest firmware update for Huawei y300
what is the latest firmware update for Huawei y300? i have the software versio V100R001C151B165 is this the latest update?
please update
i backed up my imei but deleted the folder i try to backup again and it says its already backed up ??
How to restore Imei
I didn't understood woht ot restore my imei. Could you explain it completely?
HUAWEII Y300-0000 question
Hi,
I have HUAWEII Y300-0000 phone I've bought in china.
Managed to unlock it thanks to your manual.
It comes with ROM: Y300-0000V100R00C17B180 (Android 4.1.1).
The only problem I have is that sometimes when I try to dial I do not manage to establish call (the call is tried to be established and then disconnects). When this happens there is also problem in incoming calls. I manage to receive the incoming call but when answered the connection drops after several seconds.
My question is whether this is an issue you are familiar with.
If so, do you have any suggestions?
Are there any new ROMs for this version that maybe handle these kind of issues.
How can I install new ROM on already rooted phone?
Thanks in advance
tamirgz said:
Hi,
I have HUAWEII Y300-0000 phone I've bought in china....
Click to expand...
Click to collapse
Have the same problem - could I instal there soft for Y300-0100 after unlock bootloader?
Can you tell me how do I "zero" the Y300 IMEI? I have one that was left without system and now I can't flash the
HUAWEI_Y300_firmware(Y300-0100,Android 4.1,Emotion_UI,V100R001C00B175,Normal,05011FKA)
Now I can't revive my Huawei?
Thanks
OmenHTX said:
If you have "faild" at step 2/2 , you must "zero" your imei > flash rom > restore imei.
Click to expand...
Click to collapse
I tried the official one but the performance is very low:crying::crying::crying::crying:
Ram Expander on Huawei Asend Y300
I rooted my phone it works properly. Everything working fine. I just have have one problem that how to expand its ram. Plz tell me.
I tried with 2gb class 6 card with swalpt expander but it show nothing in it.
Huawei Y300 Ram Expander
Plz tell me how to expand ram of Huawei Ascend Y300.
babaphone said:
Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards
Click to expand...
Click to collapse
hi there, i believe you can only flash the official firmware upgrades from a official ROM because when you check for upgrades to the firmware it gives you a option to install from local storage which i have yet to see in a custom ROM. in future i would always recommend a backup before installing any other ROM
hey someone flashed the official rom successfully?
zeroing imei
can you write how to zero imei code
flashing huawei y300. if you can upload any ctock or custom ro who i can install in
mobilexpert said:
Hi,
same method as old models :
Check phone version / exact sub-model, here are three hardware versions of Y300:
1.Huawei Y300 (T8833) - TD-SCDMA / China Mobile
2.Huawei Y300-0000 (U8833) - WCDMA China Unicom
3.Huawei Y300-0100 (U8833) - WCDMA International
check version (product ID) with this code : *#*#1357946#*#* , dial button (green)
there is international version ROM - Y300-0100 at Huawei site, you probably downloaded it ...
- put "dload" folder from archive on formatted micro-sd card's ROOT
- put micro-sd card into phone
- start phone in download mode = Press the VOLUME UP and VOLUME DOWN key, and then press the
POWER key to power on the phone and enter the Software Upgrade Mode
(taken from upgrade manual - which is found in archive, pdf ... )
- wait for finish ...
p.s. if not accepting firmware - means it's not international version ....
b.r.
Alex
Click to expand...
Click to collapse
if you can upload any custom or stock rom who i can install in stock recowery for huawei y300(recowery name is .android system recowery<3e>
huawei y300 flashing
OmenHTX said:
If you have "faild" at step 2/2 , you must "zero" your imei > flash rom > restore imei.
Click to expand...
Click to collapse
how to get or hack bootloader code if my phone is bricked.
or
if you can upload any custom or stock rom to install in stock recowery(i can go to recowery and i can force upgrade but fails at step 2/2).
recowery name is ''android system recowery <3e>''.
or if i can instal any custom recowery now i install rom trought this custom recowery.
WRITE ANY OPTION TO WAKE UP MY PHONE.
falshing huawei y 300
babaphone said:
Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards
Click to expand...
Click to collapse
i install chainfire 3d and when i instaling driver my phone is shut down and i can wake up him from that it only show huawei ascend logo i can go to stock recowery and i can force upgrade but fail at ste 2 can you fix it
Unlockin Huawei Y300
babaphone said:
Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=BBliIomdLOI
You can unllock bootloader like this see on video
Sigma-key app
Ateeq Rana said:
Plz tell me how to expand ram of Huawei Ascend Y300.
Click to expand...
Click to collapse
Search playstore I forget the excat name of the app. I used swapit(the name has changed now I forget the name) this uses your sd card as ram but do take note that the more u use your sd card the quicker it can go bad.
Download file :
CROM Services (Unlockbootloader) :Mod Edit : Links Removed
ROM (add root kernel) : Mod Edit : Links Removed
Phone_Info (Unlock SIM) : Mod Edit : Links Removed
reachedxyz said:
Download file :
CROM Services (Unlockbootloader) : dienthoaithainguyen.com
ROM (add root kernel) : dienthoaithainguyen.com
Phone_Info (Unlock SIM) : dienthoaithainguyen.com
Click to expand...
Click to collapse
What is the password for this ROM zip?
Thread closed.
It is basically a duplicate of http://forum.xda-developers.com/galaxy-j7/how-to/unlock-sim-1-sm-j7109-j7-china-fix-3g-t3488477
Regards
Vatsal,
Forum Moderator.
Hello mates im looking for this specific version everytime i try to flash phone even with highter version i get error
what i got is this version
Model : XT1641
Boot Ver. : moto-msm8952-B0.0E(*)
Baseband : M8952_70030.25.03.62R ATHENE_LATAM_CUST
Software : Blur_Version.25.11.16.athene.retail.en.US
IMEI : 354120073338194
any help o need that blur version .. i have try nougat firmare but i cant get for xt1641 only other variants
thks
chagua said:
Hello mates im looking for this specific version everytime i try to flash phone even with highter version i get error
what i got is this version
Model : XT1641
Boot Ver. : moto-msm8952-B0.0E(*)
Baseband : M8952_70030.25.03.62R ATHENE_LATAM_CUST
Software : Blur_Version.25.11.16.athene.retail.en.US
IMEI : 354120073338194
any help o need that blur version .. i have try nougat firmare but i cant get for xt1641 only other variants
thks
Click to expand...
Click to collapse
Looks like you need the Nougat NPJS25.93-14.4 firmware, as your software matches that of the March 2017 security build. Here's a fastboot stock ROM of that firmware https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138 Nougat firmwares look to be flashable on Moto G4 and G4 Plus devices, so should flash onto your device. It's also the latest firmware we have access to currently.
Hopefully it'll repair your bootloader(though be careful when flashing your bootloader however.) What happened to your device and are you able to access your bootloader?
So I flashed stock rom from December patch and then the baseband changed to ATHENE_EMEA_DSDS_CUST and the version ends in 62.02p but it should be ATHENE_INDIA and the version should end in R. I am using the indian variant ( XT1643 ). Can anyone please tell me what to do ? Or please provide me baseband from Indian variant with the instructions to flash it since I am mostly a noob. Thanks.
Niketan Gulekar said:
So I flashed stock rom from December patch and then the baseband changed to ATHENE_EMEA_DSDS_CUST and the version ends in 62.02p but it should be ATHENE_INDIA and the version should end in R. I am using the indian variant ( XT1643 ). Can anyone please tell me what to do ? Or please provide me baseband from Indian variant with the instructions to flash it since I am mostly a noob. Thanks.
Click to expand...
Click to collapse
I think reflashing will do the thing for you. Before flashing make sure to geta back up of data as internal storage gets wiped out.
Link : https://www.google.co.in/amp/s/foru...tock-rom-npjs25-93-14-4-march-1-t3608138/amp/
Sent from my Moto G4 Plus using Tapatalk
DgnrtnX said:
I think reflashing will do the thing for you. Before flashing make sure to geta back up of data as internal storage gets wiped out.
Link : https://www.google.co.in/amp/s/foru...tock-rom-npjs25-93-14-4-march-1-t3608138/amp/
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
Not working bro.... Baseband still not changing after flashing stock rom latest update for XT1643. Please help.
follow the thread given below and ur problem would be solved !
https://forum.xda-developers.com/moto-g4-plus/help/sim-cards-getting-detected-service-t3803036
Hi everyone
.
i have a S8 G950FD
.
android Pie is ridiculously battery drainer so i want to downgrade to 8
.
but when i try to flash oreo stock rom with odin (OEM Unlocked) it fails and i get sw rv : Device: 8 Binary:4 error in download mode which means i cant downgrade to older bootloader !
.
however once before i had successfully downgraded from 9 to 8 (i don't remember how i solved it)
(iv'e heard since November 2019 update they have blocked bootloader downgrade)
.
any ideas ? if u know a fix help please :fingers-crossed:
.
current build : G950FXXS8DTC1
the build i want to flash: G950FXXS4CRJD
damn u Samsung
King Arc s said:
Hi everyone
.
i have a S8 G950FD
.
android Pie is ridiculously battery drainer so i want to downgrade to 8
.
but when i try to flash oreo stock rom with odin (OEM Unlocked) it fails and i get sw rv : Device: 8 Binary:4 error in download mode which means i cant downgrade to older bootloader !
.
however once before i had successfully downgraded from 9 to 8 (i don't remember how i solved it)
(iv'e heard since November 2019 update they have blocked bootloader downgrade)
.
any ideas ? if u know a fix help please :fingers-crossed:
.
current build : G950FXXS8DTC1
the build i want to flash: G950FXXS4CRJD
damn u Samsung
Click to expand...
Click to collapse
Flash the full Oreo firmware without the BL tab, then you will be downgrading to Oreo but you will still keep the Pie bootloader.
Also if you do want to downgrade the bootloader I found this thread: https://forum.xda-developers.com/galaxy-s8/how-to/guide-skipping-kg-prenormal-oneui-t3911862/amp/
JJcoder said:
Flash the full Oreo firmware without the BL tab, then you will be downgrading to Oreo but you will still keep the Pie bootloader.
Also if you do want to downgrade the bootloader I found this thread: https://forum.xda-developers.com/galaxy-s8/how-to/guide-skipping-kg-prenormal-oneui-t3911862/amp/
Click to expand...
Click to collapse
have u tried this ?
i tried and odin stucked at recovery + in download mode i get kernel REV: DEVICE: 7 BINARY: 3
King Arc s said:
have u tried this ?
i tried and odin stucked at recovery + in download mode i get kernel REV: DEVICE: 7 BINARY: 3
Click to expand...
Click to collapse
No, I have not tried it but I thought it might work. Try downgrading the bootloader via this method https://forum.xda-developers.com/galaxy-s8/how-to/guide-skipping-kg-prenormal-oneui-t3911862
I think you can also get heimdall on Windows
Edit: I found the heimdall download page here: https://glassechidna.com.au/heimdall/
If that doesn't work I also found this thread about downgrading the bootloader with combo firmware: https://forum.xda-developers.com/galaxy-s8/help/method-to-downgrade-galaxy-s8-to-oreo-t3946240/amp/ You just have to find a combo firmware with the same binary version as your current firmware.
Downgrading the bootloader is really hard on Samsung devices if possible at all
King Arc s said:
have u tried this ?
i tried and odin stucked at recovery + in download mode i get kernel REV: DEVICE: 7 BINARY: 3
Click to expand...
Click to collapse
Your device is on a bit 7 bootloader. The firmware you are trying to flash is a revision 3. You cannot downgrade your revision. 5th digit from far right end in firmware is your software revision
hi i have a sm-g955f
with g955fxxs7dta6 base band
can i downgrade from android 9 to android 8?
thanks
geppy33 said:
hi i have a sm-g955f
with g955fxxs7dta6 base band
can i downgrade from android 9 to android 8?
thanks
Click to expand...
Click to collapse
Same as post as above yours check all the Android 8 firmwares if they are the same bit number as Android 9 then yes. If not. No
so in my case I have to find a custom android 8 rom with bit 7?
and if I put a custom rom with a lower rev bit can I downgrade?
having rooted and having twrp?
if it has knox, most likely not
[QUOTE = "avipars, post: 84174127, member: 7551187"]
se ha knox, molto probabilmente no
[/CITAZIONE]
knox is 0x1 therefore no guarantee
geppy33 said:
and if I put a custom rom with a lower rev bit can I downgrade?
having rooted and having twrp?
Click to expand...
Click to collapse
I don't think you can