Related
Hello!
Model : I9301I ,Stock Firmware 4.4.2, rooted without cutom recovery.
This morning I tryed to flash TWRP recovery and I brieked my phone. Now when phone is connected to Computer i Device manger shows only Qualcomm HS-USB QLoader 9008(COM34). The phone does not boot in Download Mode nothing just black screen. I have Z3X box but I can't find model in Samsung Tool v18.2.
Odin can't view the phone, Z3X can't find the model. I made USB JIG but is not working with this model on other models is working.
Can you give me advice what to do ?
Try to remove battery for 5' and then start in download-mode again. Otherwise
not working
I have same problem
after update to 4.4.4 (india) my phone trun down
please help
If you cant enter to download and recovery it is hard brick. You have to buy USB JIG and unbrick it
i'm living in iran
can't find usb jig
can i make it?
please help i don't have time
http://forum.xda-developers.com/galaxy-s2/help/guide-how-to-make-usb-jig-reset-binary-t1604707
I have never tried this so you are on your own...GOOD LUCK!
MrSajjad said:
I have same problem
after update to 4.4.4 (india) my phone trun down
please help
Click to expand...
Click to collapse
There is no 4.4.4 for 9301....
same thing happened with me after flashing indian 4.4.4 into my i9300i now its not turning on
muntinlupa said:
http://forum.xda-developers.com/galaxy-s2/help/guide-how-to-make-usb-jig-reset-binary-t1604707
I have never tried this so you are on your own...GOOD LUCK!
Click to expand...
Click to collapse
Hi,
are u sure it's working fro I9300i?
soldon said:
There is no 4.4.4 for 9301....
Click to expand...
Click to collapse
sorry i have I9300i
usman_fareed said:
same thing happened with me after flashing indian 4.4.4 into my i9300i now its not turning on
Click to expand...
Click to collapse
my ex-rom was china with 18 MB update with phone
did you have china rom like me?
sorry I'm a new student in english
if i have problem tell me to know
MrSajjad said:
Hi,
are u sure it's working fro I9300i?
Click to expand...
Click to collapse
Of course I am not sure as I said I have not tried it. However since you have a brick phone then you can try anything. But the best thing is to bring it to a Samsung Service Center. Tell them you tried to update and this happened.
same problem
usman_fareed said:
same thing happened with me after flashing indian 4.4.4 into my i9300i now its not turning on
Click to expand...
Click to collapse
same problem
From the previous thread about GT-I9300I there is another version which was released for India. I suggest you check first if you have the Indian version using CPUz app before flashing/upgrading.
Read this if you have this Indian version then the update might not be for your phone.
thats the firmware i downloaded and it hard bricked my device
http://www.sammobile.com/firmwares/download/36608/I9300IDDUBNI1_I9300IODDBNI1_INS.zip/
muntinlupa said:
Of course I am not sure as I said I have not tried it. However since you have a brick phone then you can try anything. But the best thing is to bring it to a Samsung Service Center. Tell them you tried to update and this happened.
Click to expand...
Click to collapse
Usb jig doesn't work
usman_fareed said:
thats the firmware i downloaded and it hard bricked my device
http://www.sammobile.com/firmwares/download/36608/I9300IDDUBNI1_I9300IODDBNI1_INS.zip/
Click to expand...
Click to collapse
If I'm not mistaken, India has two models, one with 1.2 Ghz processor, and another with 1.4 GHz processor (please correct me if I'm wrong). If you are from India, just go to your device update section and check if the update is available via OTA.
Or just install Kies and try to update from it. Sammobile says the 4.4.4 for India is avaiable from Kies.
No need to flash anything via Odin if the 4.4.4 update is available for your country (except if you have previously installed another firmware). :good:
MrSajjad said:
Usb jig doesn't work
Click to expand...
Click to collapse
today again test usb jig
i hope it's working
can any i9300i user plz flash this file https://copy.com/1ggUuyIqHUrF it will create a debrick img
source http://forum.xda-developers.com/showthread.php?t=2439367
usman_fareed said:
can any i9300i user plz flash this file https://copy.com/1ggUuyIqHUrF it will create a debrick img
source http://forum.xda-developers.com/showthread.php?t=2439367
Click to expand...
Click to collapse
please i need this too
Usb jig doesn't work again
USB JIG not working! I Found solution here is the post
Hi Guys,
i just bricked my device because of an false tutorial on Youtube
I flashed N9005XXUGBOA5_N9005XEOGBOA4_XEO ROM via Odin and erased all NAND. Now I think I need the specific PIT-File to recover my phone.
Can anyone please help me? :-/
P:S.: In case it will help: I've got an EFS-Backup.
DieAbrissbirne said:
Hi Guys,
i just bricked my device because of an false tutorial on Youtube
I flashed N9005XXUGBOA5_N9005XEOGBOA4_XEO ROM via Odin and erased all NAND. Now I think I need the specific PIT-File to recover my phone.
Can anyone please help me? :-/
Click to expand...
Click to collapse
Hi
Go here http://forum.xda-developers.com/galaxy-note-3/general/finally-official-5-0-firmware-galaxy-t3029557
Read the 1st post, do Odin again it's 1 file and your good.
here there is
9005 32 gb
You guys are awesome, it worked. My Note is alive, again!
...
None of the above PIT files worked for me... I don't have any EFS backup though... is it too late for me to do it?
I've been trying hard to get my N9005 back, here's my thread about it, would appreciate any kind of help I can get:
http://forum.xda-developers.com/galaxy-note-3/help/help-sm-n9005-hard-bricked-sd-partial-t3070743
Thanks
SO TO START THIS THREAD
Basically i have a moderate knowledge of android
I have bricked many phones and eventually i fix them(as a way to practice)
AS THE TITLE SAYS,I HARDBRICKED MY N910G,During an OTA update
i know my phone is still alive as it detects the qloader
AND I HAVE 0% knowledge of QFIL xD
So i know that QFIL needs some sort of row file
Please if somebody can help me it would be great
Thanks in Anticipation
i too have same issue, anybody please help me out
Hello all :good: I am Back with an awesome guide
This is the most required guide for every Meizu Device user
This is for those who have hardbricked or bootlooped (with locked bootloader) And missing recovery. In there device while trying anything (including roms etc) :crying:
This guide is not like i am giving you flash tools to flash your phone Because in our case it is not possible with SP Flash tools (Due To Locked Bootloader) :crying:
In this guide I will inform you how you can get your bricked device back Not free you have to pay for it
Requirements :good:
1)Meizu M2/Mini{Meilan2} (those are different names of our device in different countries)
2)Some Money According to indian Currency its max 250rs or 300rs max (well some guys can ask you for more its your luck)
3)Firmware to flash your phone (See Down For Links)
4)Little Brain
Lets Start
Download Meizu M2/Mini Flash Frimware From Here :fingers-crossed:
Links are not valid anymore
You have to find a Mobile repairer Guy Who uses tools Like MRT Dongle,UFI Android Toolbox,Chiness Phone Flash Tools.Etc
In Short Tools That Can Bypass Meizu Security (Lock On Bootloader) There are Plenty of Tools that can do same
Just go to shop ask them to fix your phone if they say you need to change hardware tell them to try with those toolbox of android it will bypass security lock of Meizu and will flash the phone
It will be costly to buy them Sinle MRT Dongle Cost (3000 rs or more or less) so it is easy to repair them from professionals just explain them what is the problem and they will fix it (Most of meizu Custtomer Care Center loots the people by Chaning EMMC (Mother Board) of there phone Unless there is no need to do that
Sharing Personal Experience :good:
Even I had bricked my phone once i went to service centre (I Was Noob that time) they flashed my phone (with official tools and files) and in just 5 minutes my phone came back to alive :victory:
Every service centre guy is not same mostly in Indonesia i had seen many post regarding this issue they just change EMMC and charge big amount of it (nearly half of the phone cost) phone cost 6999rs price of changing EMMC 3000rs :crying:
This Guide Is Applicable for All Meizu Devices Find a device specific frimware or PM me i will help you to find a flash file for you which will fix your problem :good:
Note:A Guy Named Nguyễn Th
where is the guide?
maXDAmn said:
where is the guide?
Click to expand...
Click to collapse
up ?
gialaivn said:
prices: 10$-15$
work via teamviewer
email: [email protected]
fb.com/thanhdatPD
Click to expand...
Click to collapse
:3 lol 15×64=960rs
i still say my guide is better option ? can be done under 400,500 why waste more :v
gialaivn said:
:3
I begin work.
If more people, prices will decrease.
It is still a better solution than replacing emmc
:laugh::laugh::laugh:
Click to expand...
Click to collapse
looks like that you own that tools right?
wew *__*
:3 wew kul *___*
gialaivn said:
Mrt dongle ???
Click to expand...
Click to collapse
i still think that will not work :| because physical hardware is not present :v
I have the same problem... Can you fix it?
I confirm!
The man is a magician (or a professional ).
My device was in Hard Brick and Nguyễn Thành Đạt managed to save it.
I think he deserves to be paid for the work he did. The price he charges is relatively cheap in comparison to others.
Just one more thing:
Before I had a Hard Brick, my system version was: Flyme *.*.*.*G (Global).
Nguyễn Thành Đạt installed me the version: Flyme 5.1.7.0Y (Chinese).
So now I need to Unlock Bootloader & Install Twrp And Flash the Global version.
Let him know what system version you want - Maybe he could install it for you.
i bricked my phone by installing stock rom (flyme os) in twrp is any other way to recover it?
Mathvediz said:
i bricked my phone by installing stock rom (flyme os) in twrp is any other way to recover it?
Click to expand...
Click to collapse
How do you know you bricked it? The tutorial above is for phones with locked bootloader, since you have TWRP already yours is unlocked. Try reflashing recovery via fastboot (try stock here's a link https://drive.google.com/file/d/0B0ix4bkQ8JjAdzBVZW1ZcmlSNjg/view?usp=sharing) then flash flyme
ChakibDEV said:
How do you know you bricked it? The tutorial above is for phones with locked bootloader, since you have TWRP already yours is unlocked. Try reflashing recovery via fastboot (try stock here's a link https://drive.google.com/file/d/0B0ix4bkQ8JjAdzBVZW1ZcmlSNjg/view?usp=sharing) then flash flyme
Click to expand...
Click to collapse
Yes i know it is bricked because nothing happen when i press power button, pwr+volume down (fastboot), pwr+up (recovery).
But i already solve the problem by flashing temp_unlock_secro.img and flashing stock flyme 4 with option format all + download, thank you for your help.
I think flashing flyme will lock the bootloader again, but im not sure im still newbs.
Mathvediz said:
Yes i know it is bricked because nothing happen when i press power button, pwr+volume down (fastboot), pwr+up (recovery).
But i already solve the problem by flashing temp_unlock_secro.img and flashing stock flyme 4 with option format all + download, thank you for your help.
I think flashing flyme will lock the bootloader again, but im not sure im still newbs.
Click to expand...
Click to collapse
Happy you solved your problem. I flashed flyme using both TWRP and stock recovery and the bootloader's still unlocked.
Mathvediz said:
i bricked my phone by installing stock rom (flyme os) in twrp is any other way to recover it?
Click to expand...
Click to collapse
same here what to do?
i need firmware but download link is not working please help me
my device is bricked i need sp tool firmware please help
lyfhckr said:
my device is bricked i need sp tool firmware please help
Click to expand...
Click to collapse
You can't get it here dude.
Dwnld it from here.
http://www.softpedia.com/dyn-postdownload.php/6b986d7c8ddf22446036468c5cb3fa6c/5a0181bf/39687/0/1
Mathvediz said:
Yes i know it is bricked because nothing happen when i press power button, pwr+volume down (fastboot), pwr+up (recovery).
But i already solve the problem by flashing temp_unlock_secro.img and flashing stock flyme 4 with option format all + download, thank you for your help.
I think flashing flyme will lock the bootloader again, but im not sure im still newbs.
Click to expand...
Click to collapse
Hey man, just wanna ask how did you flash this temp_unlock_secro.img.. And where did you get it??
Pretty good!
Hi! I have a ze520kl in 900e mode... there is a solution for this problem? :crying:
Relssek said:
Hi! I have a ze520kl in 900e mode... there is a solution for this problem? :crying:
Click to expand...
Click to collapse
You bricked your phone .
I have QFIL Files to unbrick your phone.
Contact me via Telegram
MOD EDIT: LINK REMOVED
The distribution of social media links is no longer allowed on XDA. Please refer to the thread linked below:
Telegram and Whatsapp Channels - Going Forward
Bro i have i recovered the phone and lost imei ç_ç I have all data, my phone is original ç_ç can you help me?:crying::crying::crying:
Contact me for facebook please...
Relssek said:
Bro i have i recovered the phone and lost imei ç_ç I have all data, my phone is original ç_ç can you help me?:crying::crying::crying:
Contact me for facebook please...
Click to expand...
Click to collapse
What firmware are you running on?
ZenFone_3 said:
What firmware are you running on?
Click to expand...
Click to collapse
I have currently ww_14.2020.1711.81_20171216 Nougat ... I have also tried other versions but nothing ç_ç I need the qcn files maybe
Relssek said:
I have currently ww_14.2020.1711.81_20171216 Nougat ... I have also tried other versions but nothing ç_ç I need the qcn files maybe
Click to expand...
Click to collapse
Go HERE.
You can find all RAW, CSC, QFIL, EMMC ( QCN ) firmwares for ze520kl.
Hit the thanks button if i helped.
Eng.Raman said:
Go HERE.
You can find all RAW, CSC, QFIL, EMMC ( QCN ) firmwares for ze520kl.
Hit the thanks button if i helped.
Click to expand...
Click to collapse
Bro how to flash qcn firmware? This firmware is .bin... Emmc box? I don't have Emmc box... >.<