H910(AT&T) -> H915(Canada)? - LG V20 Questions & Answers

Hi,
I bought the LG V20 H910(AT&T) from Newegg because there was a good deal and it was unlocked, however I don't have a good cell reception with Fido. Could it be possible for me the flash the Canadian variant firmware(H915) over H910 to have the canadian modem and baseband?
Thanks

Yes.
-- Brian

runningnak3d said:
Yes.
-- Brian
Click to expand...
Click to collapse
Thanks Brian!

Brazil
I bought an unlocked ATT V20 H910m last year and bought it to Brazil, it's working fine but, as we don't have ATT here I cannot update it.
Do you know if I flash this H915 rom I will be able to use another carrier here and receive OTA updates?
Thanks

Another option (if the flashed firmware doesn't seem to help) is to use the EXT roaming option. It's a no cost (to Canadian cell users with one of the big three) option, all you have to do is manually select the network operator using one of the EXT providers that will show up besides the FIDO ones. I run the H990DS model and I'm over on the west coast of BC. Over the years the Rogers (who Fido actually is) cell tower signal has degraded so bad that it's practically unusable. So I just went to permanently roaming on Telus towers using EXT. Never had any financial repercussions from Fido on my bill and the Telus signal is very good. The EXT roaming is a mutual aid thing that Telus, Rogers and Bell came up with and implemented not that long ago (year or so ago).
FWIW
XblackdemonX said:
Hi,
I bought the LG V20 H910(AT&T) from Newegg because there was a good deal and it was unlocked, however I don't have a good cell reception with Fido. Could it be possible for me the flash the Canadian variant firmware(H915) over H910 to have the canadian modem and baseband?
Thanks
Click to expand...
Click to collapse

Tim3tripp3r said:
Another option (if the flashed firmware doesn't seem to help) is to use the EXT roaming option. It's a no cost (to Canadian cell users with one of the big three) option, all you have to do is manually select the network operator using one of the EXT providers that will show up besides the FIDO ones. I run the H990DS model and I'm over on the west coast of BC. Over the years the Rogers (who Fido actually is) cell tower signal has degraded so bad that it's practically unusable. So I just went to permanently roaming on Telus towers using EXT. Never had any financial repercussions from Fido on my bill and the Telus signal is very good. The EXT roaming is a mutual aid thing that Telus, Rogers and Bell came up with and implemented not that long ago (year or so ago).
FWIW
Click to expand...
Click to collapse
Interesting. I'll check it out. Thanks!

Tim3tripp3r said:
Another option (if the flashed firmware doesn't seem to help) is to use the EXT roaming option. It's a no cost (to Canadian cell users with one of the big three) option, all you have to do is manually select the network operator using one of the EXT providers that will show up besides the FIDO ones. I run the H990DS model and I'm over on the west coast of BC. Over the years the Rogers (who Fido actually is) cell tower signal has degraded so bad that it's practically unusable. So I just went to permanently roaming on Telus towers using EXT. Never had any financial repercussions from Fido on my bill and the Telus signal is very good. The EXT roaming is a mutual aid thing that Telus, Rogers and Bell came up with and implemented not that long ago (year or so ago).
FWIW
Click to expand...
Click to collapse
I tried to do that but when I go into the network settings and I click on search networks I get Error while searching for networks

Mine does that once in a blue moon.
Either reboot it or turn it off and do a cold boot.
Do not try right away after booting has been completed, give it a few minutes to settle in. I have found that trying to scan right away after a boot is where what you experienced will happen, also once in a blue moon if the current network has issues (or it could just be the LG V20 itself) the signal drops out and a rescan doesn't work. I must say that this is a very infrequent occurrence (months+?).
Once you know how to deal with the idiosyncrasies of using the Fido-EXT it sure has worked great for me.
Out West (BC) I always get multiple Fido-EXT networks (see screenshot).
In my case one of the EXT networks is Telus and the other is BELL. It will only hook up with Telus not Bell, however out East it might be the other way around YMMV (your mileage may vary). No way to tell whose is who, just know to try the other one if the first doesn't work. AFAIK the order will stay the same after a reboot or cold start, so if it is a certain one in the list that works then it should be the same every time.
The odd time I switch back to Fido for awhile then go back to Fido-EXT, I can usually do this on the fly without having issues either way but if it doesn't co-operate a reboot or cold start takes care of it.
Hope that this helps you get it sorted out.
XblackdemonX said:
I tried to do that but when I go into the network settings and I click on search networks I get Error while searching for networks
Click to expand...
Click to collapse

Tim3tripp3r said:
Mine does that once in a blue moon.
Either reboot it or turn it off and do a cold boot.
Do not try right away after booting has been completed, give it a few minutes to settle in. I have found that trying to scan right away after a boot is where what you experienced will happen, also once in a blue moon if the current network has issues (or it could just be the LG V20 itself) the signal drops out and a rescan doesn't work. I must say that this is a very infrequent occurrence (months+?).
Once you know how to deal with the idiosyncrasies of using the Fido-EXT it sure has worked great for me.
Out West (BC) I always get multiple Fido-EXT networks (see screenshot).
In my case one of the EXT networks is Telus and the other is BELL. It will only hook up with Telus not Bell, however out East it might be the other way around YMMV (your mileage may vary). No way to tell whose is who, just know to try the other one if the first doesn't work. AFAIK the order will stay the same after a reboot or cold start, so if it is a certain one in the list that works then it should be the same every time.
The odd time I switch back to Fido for awhile then go back to Fido-EXT, I can usually do this on the fly without having issues either way but if it doesn't co-operate a reboot or cold start takes care of it.
Hope that this helps you get it sorted out.
Click to expand...
Click to collapse
I don't even see that on my H910. I think AT&T restricts too much stuff on the phone. I even tried to enter the Telus APN manually and it doesn't work. I tried to enter the Telus APN settings in my /system/etc/apns-conf.xml and it didn't work.

The only other thing I can think of is (it might be stupid) do you have "roaming" enabled. If not I can see how that might affect things.
Also have you ever used the "hidden menu" from the dialer to explore?
In my case it's *#546368#*990# but you would substitute 910 for the 990.
You can make changes to the APN from there (and other things) , there's a few posts here on XDA about it.
Finally I also came across this app called "Settings Database Editor" that you can d/l from the Play Store.
I found here on XDA were someone used it to get tethering functioning properly, it lets you do a few things. All of the above work with stock phones - root not required. All these were found in the LG V20 forums.
Just kind of pulling straws for you on the hope that something might be of use.
XblackdemonX said:
I don't even see that on my H910. I think AT&T restricts too much stuff on the phone. I even tried to enter the Telus APN manually and it doesn't work. I tried to enter the Telus APN settings in my /system/etc/apns-conf.xml and it didn't work.
Click to expand...
Click to collapse

Tim3tripp3r said:
The only other thing I can think of is (it might be stupid) do you have "roaming" enabled. If not I can see how that might affect things.
Also have you ever used the "hidden menu" from the dialer to explore?
In my case it's *#546368#*990# but you would substitute 910 for the 990.
You can make changes to the APN from there (and other things) , there's a few posts here on XDA about it.
Finally I also came across this app called "Settings Database Editor" that you can d/l from the Play Store.
I found here on XDA were someone used it to get tethering functioning properly, it lets you do a few things. All of the above work with stock phones - root not required. All these were found in the LG V20 forums.
Just kind of pulling straws for you on the hope that something might be of use.
Click to expand...
Click to collapse
That could be an idea. I'll try that. Thank you.

I too have the HR1010r AT&T V20 and live in Montenegro (Europe). I would like to flash the Canadian Oreo via the Flash Tool but want to make sure that I can say Bell, Rogers etc., and will it work? I don't care if I can get OTA updates, I just want to get Oreo! Lol
Thanks guys!

Related

[Q] Switched to At&t and cant make or receive calls. data works, though

I had to switch from TMobile to At&t for work reasons. I got the Samsung Focus on At&t and I love it, but I flashed Android on my HD2 hoping that I would have the best of both worlds: a WP7 and an Android phone equivalent to the Inspire 4G.
The good news is that when I put my At&t SIM Card on my HD2, it registers and says At&t, and the data works fine (EDGE, but nothing is perfect, i knew that 3G was not going to work because of the different frequencies At&t and TMobile use), the bad news is that I'm not able to make or receive calls or texts.
Anyone has any idea how to make the HD2 with Android work on At&T?
Please ignore the part of my sig where it says that i'm running windows mobile, although i'm willing to flash it if that is the solution, but i want to play with Android for a while.
Any help will be appreciated!
Cheers!
You will have to unlock the phone. Call T_Mobile and they can generate a unlock code for you.
My phone is unlocked... any other ideas?
Did you go to Settings/Mobile Networks/Network Operators/Search Networks and choose AT&T as your carrier? In the same menu, you can Select Automatically so that you don't have to manually choose which carrier is available in your area.
AT&T is the only carrier that shows up whether i select it manually or automatically.
ZaidSenall said:
AT&T is the only carrier that shows up whether i select it manually or automatically.
Click to expand...
Click to collapse
That's strange. Seeing your moniker and knowing you were on T-Mobile, it should also show up. Since your phone is unlocked like mine, I used to be on AT&T and would see both carriers when I did a search of the airwaves. Did you check your APN settings so that they are set up for AT&T?
Here's the link to the ATT APN thread: http://forum.xda-developers.com/showthread.php?t=692059
Hope this works for you.
slbenz said:
That's strange. Seeing your moniker and knowing you were on T-Mobile, it should also show up. Since your phone is unlocked like mine, I used to be on AT&T and would see both carriers when I did a search of the airwaves. Did you check your APN settings so that they are set up for AT&T?
Here's the link to the ATT APN thread: http://forum.xda-developers.com/showthread.php?t=692059
Hope this works for you.
Click to expand...
Click to collapse
I will try this when i get home tonight. I also thought that both of them would show up. but strangely only AT&T shows up. It's weird that data works fine, though...
Thanks for your help. I will post back with the results tonight...
ZaidSenall said:
I will try this when i get home tonight. I also thought that both of them would show up. but strangely only AT&T shows up. It's weird that data works fine, though...
Thanks for your help. I will post back with the results tonight...
Click to expand...
Click to collapse
Nothing worked, so I flashed windows mobile and now everything works fine (except 3g, of course). I guess it is something with Android. I'm sure someone will figure it out...
Thanks for the help, though.
try a different rom. might be the rom you're using... try an unofficial cyanogenmod7 rom and flash with cwm.
Same Problem
I have the same problem with my HD2. It's been flashed to gingerbread 2.3.6 and unlocked. I can get data, but I can't make calls or send texts. I'm wondering if you fixed yours! If so, I'd really appreciate it if you could help me out

[Q] No service after trying LTE

Hi
I was playing around with my phone and tried the old hack through the settings screen, *#*#4636#*#*.
Switched it to LTE and set up a new APN for Rogers LTE.
It Didn't work. After more reading I discovered this wouldn't work for me anyway. I have Android 4.4.2 and I don't think my SIM is LTE enabled.
I rebooted thinking it would just go back to the original settings.
It seems to have gone back but now I have No signal at all.
I am with Rogers. I tried going back to the original APN settings and selecting Rogers.
The phone is finding the correct networks for my area.
I tried the Reset to default in the APN settings. This sets the APNs to Rogers LTE and chatr, not the original Rogers APN that I started with.
The phone is rooted but running stock Android 4.4.2.
The baseband seems correct.
What have I done and how do I fix it?
Have I done something to the Rogers SIM?
Thanks
Angus_xda said:
Hi
I was playing around with my phone and tried the old hack through the settings screen, *#*#4636#*#*.
Switched it to LTE and set up a new APN for Rogers LTE.
It Didn't work. After more reading I discovered this wouldn't work for me anyway. I have Android 4.4.2 and I don't think my SIM is LTE enabled.
I rebooted thinking it would just go back to the original settings.
It seems to have gone back but now I have No signal at all.
I am with Rogers. I tried going back to the original APN settings and selecting Rogers.
The phone is finding the correct networks for my area.
I tried the Reset to default in the APN settings. This sets the APNs to Rogers LTE and chatr, not the original Rogers APN that I started with.
The phone is rooted but running stock Android 4.4.2.
The baseband seems correct.
What have I done and how do I fix it?
Have I done something to the Rogers SIM?
Thanks
Click to expand...
Click to collapse
Did you flash a LTE Hybrid?
Sent with my Nexus® 10 minus 3
Berrydroidcafe said:
Did you flash a LTE Hybrid?
Sent with my Nexus® 10 minus 3
Click to expand...
Click to collapse
I didn't flash anything.
Angus_xda said:
I didn't flash anything.
Click to expand...
Click to collapse
Had to assume that because I've never seen someone try LTE without doing so.
What you can try is find the stock radio, which might still be the same as you are using, then flash it. Maybe that will reset things back to normal.
Sent with my Nexus® 10 minus 3
Berrydroidcafe said:
Had to assume that because I've never seen someone try LTE without doing so.
What you can try is find the stock radio, which might still be the same as you are using, then flash it. Maybe that will reset things back to normal.
Sent with my Nexus® 10 minus 3
Click to expand...
Click to collapse
No luck.
I tried flashing the stock radio then flashed everything using efrant's instructions. Still no go.
The thing I find strange is when I select Reset to default in the APN settings it sets the APN to Rogers LTE not the default 3G setting.
Delete the Rogers LTE apn and make a new one with this info:
Name: Rogers
APN: rogers-core-appl1.apn
MMSC: http ://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 720
APN Type: mms
You can also try this one:
APN: internet.com
Username: wapuser1
Password: wap
Go to phone info *#*#4636#*#*, and change network type to WCDMA Preferred. Reboot, and see if that does it.
I've done that several times.
Still won't connect.
The error is; No service. Selected network (ROGERS) unavailable.
When I search networks Telus, Bell and Rogers all show up.
I've tried selecting Rogers and selecting automatically. When I select automatically it selects Rogers but comes back with the same error.
Try reflash Radio
alexcheveau said:
Try reflash Radio
Click to expand...
Click to collapse
That was already suggested.
I have tried wiping everything out and flashing a complete stock 4.4.2.
I've also tried another Rogers SIM.
This is getting ridiculous.
All I did was change a setting from "WCDMA Preferred" to "LTE/GSM auto (PRL)" and back again and that killed a phone?
Angus_xda said:
That was already suggested.
I have tried wiping everything out and flashing a complete stock 4.4.2.
I've also tried another Rogers SIM.
This is getting ridiculous.
All I did was change a setting from "WCDMA Preferred" to "LTE/GSM auto (PRL)" and back again and that killed a phone?
Click to expand...
Click to collapse
I find this very strange. I use the secret menu on two phones but have never heard of this happening. My N4 will only lose signal for a few moments before switching to gsm autoprl, after switching from LTE/GSM.
Sent from backpack
Mystery solved.
I don't know why it happened at exactly the time when I tried LTE but...
The phone has been reported lost or stolen.
I bought it over two weeks ago. I checked the IMEI on the Government web site, that is supposed to protect us from this kind of thing, and it came back clean. I checked again last night and it's blacklisted.
I would say the girl that I bought it from got it on a $0 contract. Sold it then reported it lost or stolen. She's still on the hook for the contract but, so what, she'll never really have to pay it. Either that or it takes 2-3 weeks for a phone to show up on the blacklist.
Either way, the Government initiative to blacklist stolen or lost phones sounded like a good idea but in reality it's not protecting anyone.
So, now I have a small tablet and learned a lesson. Don't buy used cell phones and if you do, don't trust the protectyourdata.ca web site to protect you.
The site boasts;
"Purchasing a pre-owned device?
Check the IMEI number here to ensure the device has not been reported lost or stolen in Canada."
Thanks for trying to help folks. I did learn more about Android through this.
Angus_xda said:
Mystery solved.
I don't know why it happened at exactly the time when I tried LTE but...
The phone has been reported lost or stolen.
I bought it over two weeks ago. I checked the IMEI on the Government web site, that is supposed to protect us from this kind of thing, and it came back clean. I checked again last night and it's blacklisted.
I would say the girl that I bought it from got it on a $0 contract. Sold it then reported it lost or stolen. She's still on the hook for the contract but, so what, she'll never really have to pay it. Either that or it takes 2-3 weeks for a phone to show up on the blacklist.
Either way, the Government initiative to blacklist stolen or lost phones sounded like a good idea but in reality it's not protecting anyone.
So, now I have a small tablet and learned a lesson. Don't buy used cell phones and if you do, don't trust the protectyourdata.ca web site to protect you.
The site boasts;
"Purchasing a pre-owned device?
Check the IMEI number here to ensure the device has not been reported lost or stolen in Canada."
Thanks for trying to help folks. I did learn more about Android through this.
Click to expand...
Click to collapse
That really sucks
But thanks for letting us know.
Sent by carrier pigeon
klvnhng said:
That really sucks
But thanks for letting us know.
Sent by carrier pigeon
Click to expand...
Click to collapse
I've seen about 2 or 3 threads on Android Central with the same symptoms that seemed to never get resolved.
I suspect they had the same problem and either didn't know how to check or were to embarrassed to say.
I was upset but I want others to be able to find this answer.
Through buying and selling different phones working my way up to the Nexus 4 I'm really only $110 out of pocket.
A 16GB Android media player with WiFi must be worth $110.
So, is there a way to eliminate the wireless radio and leave WiFi?
I guess I should start another thread on that.
Angus_xda said:
I've seen about 2 or 3 threads on Android Central with the same symptoms that seemed to never get resolved.
I suspect they had the same problem and either didn't know how to check or were to embarrassed to say.
I was upset but I want others to be able to find this answer.
Through buying and selling different phones working my way up to the Nexus 4 I'm really only $110 out of pocket.
A 16GB Android media player with WiFi must be worth $110.
So, is there a way to eliminate the wireless radio and leave WiFi?
I guess I should start another thread on that.
Click to expand...
Click to collapse
I guess the simplest way would be to just have airplane mode on?
Sent by carrier pigeon
klvnhng said:
I guess the simplest way would be to just have airplane mode on?
Sent by carrier pigeon
Click to expand...
Click to collapse
Airplane mode also turns of the WiFi.
I just pulled the SIM, deleted all APNs, turned off Mobile Data and left WiFi on.
The warning that I had no data connection is gone and I still have the ability to make a 911 call if necessary.
Unlocked, rooted and flashed a USB-OTG enabled kernel. This is great fun...
Angus_xda said:
Airplane mode also turns of the WiFi.
I just pulled the SIM, deleted all APNs, turned off Mobile Data and left WiFi on.
The warning that I had no data connection is gone and I still have the ability to make a 911 call if necessary.
Unlocked, rooted and flashed a USB-OTG enabled kernel. This is great fun...
Click to expand...
Click to collapse
You can turn wifi on with airplane mode on as well. Just do it after airplane mode is already on.
But that works too, I guess
Sent by carrier pigeon
klvnhng said:
You can turn wifi on with airplane mode on as well. Just do it after airplane mode is already on.
But that works too, I guess
Sent by carrier pigeon
Click to expand...
Click to collapse
Yep, just figured that out.
Did you make a police report? You might not be able to recoup anything, but you should still make the seller be responsible for their actions
Sent from my Nexus 4 using xda app-developers app

The Ntelos S5

I have an ntelos S5 (G900R7). There is no development for this phone anywhere on the internet. Perhaps I can find support here?
---------
So far (you may skip this part):
I have managed to successfully install Spirit Rom with full functionality, by copying my old build.prop into the system directory, and restoring my previous apn settings using the apnsbu. I forget why I left this rom, but I did. Everything I try has some problem! I then proceeded to try just CM11, by itself, and had 3g difficulties. Then, using Kushman's sprint MIUI, (Ntelos shares sprint towers) things seemed to work right, but it remapped my recent app key to menu... (perhaps I can map it back?) and the volume was not controlled by my physical volume buttons.
-----------
Now my favorite rom so far: Mokee Rom It's fast and visually pleasing, but I have wi-fi and phone difficulties.
After imposing my APN settings, I can reproduce these effects:
(1) Before replacing build.prop, the wi-fi works and can be enabled or disabled as I need. Also, 3g works very well at nice speeds, but it says "Verizon Wireless" underneath the 3g indicator bars. However, I cannot make calls. If I attempt to do so, the 3g data stops working, turns orange, and no longer says "3g". If I do this, then no data can be transmitted or received.
(2) After Replacing build.prop with the "good original" copy (which sometimes fixes similar problems in other custom roms) the wi-fi becomes stuck in a constant state of "turning wi-fi on..." but never turns on. 3g still works, but, as in part (1), it will break if I try to make a call.'' Also, in this case it says "Sprint" instead of "Verizon Wireless"
Does any one have advice, or perhaps some build.prop settings to modify? Or maybe there's a different file that would help. Again, my phone is the SM G900R7. Has someone else with this phone had luck customizing it?
Thank you
nTelos S5
Likewise have a nTelos S5, have not found any custom roms that can successfully be installed without data or phone issues.
Also trying to install any ASOP roms resulted with all phone efs data getting cleared.
Upon searched relentlessly the only rom I found that functions is located at
http://teamcspire.com/index.php?/topic/112-gs5-g900r7-r2-teamcspire-nd8stock-deodexed-101814/
its very stock but functions flawlessly for me.
Advise if you have any luck, I will reciprocate.
doby-nut said:
Likewise have a nTelos S5, have not found any custom roms that can successfully be installed without data or phone issues.
Also trying to install any ASOP roms resulted with all phone efs data getting cleared.
Upon searched relentlessly the only rom I found that functions is located at
http://teamcspire.com/index.php?/topic/112-gs5-g900r7-r2-teamcspire-nd8stock-deodexed-101814/
its very stock but functions flawlessly for me.
Advise if you have any luck, I will reciprocate.
Click to expand...
Click to collapse
My advice is to you, is that if you install Mokee rom, do not update it with OTA update. This is what I think broke the network for me. Even after restoring my phone to factory conditions and using Kies, I still had no network. I ended up going to the nTelos store, where they had to reset the network service for my phone on their end... strange.
Anyway, I have made a few roms work, and I suspect I could make more. If you maintain your apn settings, and build.prop, you should be able to make Spirit rom work. The same thing is true for Miui. However, if I remember from my experience correctly, if you do install Miui, then I THINK you should not restore your original build.prop; it may work without it... just restore the apn settings. When you do this, you may have to change the preferred network mode... I am a little freaked out, after my previous experience with Mokee rom, to mess with this any longer, though. I do have a problem with Spirit rom: if I use the Timely alarm clock, the time panel is miscolored, but I believe that could possibly? be fixed by flashing a different kernel. I plan on flashing Spirit tonight.... stock uses up my battery too fast, and Spirit just feels more responsive.
EDIT: I just re-flashed Spirit Rom, and they fixed the discoloration in the most recent version! Also, as before, my 3g and WiFi work fine.
Took me days...
The CSpire shares the model number and ROM. The US Cellular CM11 is the closest. Somewhere in that I lost my ability to send texts (not sure if it's the SMSC or...) and didn't get it back when I ODIN'd to stock. I would LOVE to have CM support for this model.
I also am in the same boat as you guys. I would love to get another reliable ROM on this phone. I just have bad memories of purchasing my last one (Sprint GS3) from ebay, and having one hell of a time making the MMS work after flashing it for nTelos. However, I never did have to mess with any of the APNs or build.prop settings on that one. I would think the Sprint ROMs should be the closest compatible ROM, being that nTelos and Sprint do share towers in WVa and Va (Sprint actually has zero towers in these states, and leases nTelos towers instead).
Is using EFS Backup by Wanam a good method to insure the EFS does not get screwed up?
caezec said:
(1) Before replacing build.prop, the wi-fi works and can be enabled or disabled as I need. Also, 3g works very well at nice speeds, but it says "Verizon Wireless" underneath the 3g indicator bars. However, I cannot make calls. If I attempt to do so, the 3g data stops working, turns orange, and no longer says "3g". If I do this, then no data can be transmitted or received.
(2) After Replacing build.prop with the "good original" copy (which sometimes fixes similar problems in other custom roms) the wi-fi becomes stuck in a constant state of "turning wi-fi on..." but never turns on. 3g still works, but, as in part (1), it will break if I try to make a call.'' Also, in this case it says "Sprint" instead of "Verizon Wireless"
Click to expand...
Click to collapse
You might try saving out your wpa_supplicant file from the stock ROM and replacing it on the flashed ROM. This has worked for me before on my GS3. That might take care of the wifi anyway.
I'm also on ntelos with the s5 now. But it is a us cellular unlocked by them phone. Stuck in a ntelos sim card that I bought from store and everything works. Except 4g. I can live w/o it but it's kinda like a puzzle now. How could I enable this to work on ntelos?
Depending on where you are, ntelos does not have 4G in many places yet. It's still very spotty in West Virginia.
Has anyone taken the OTA Lollipop update? If so, how is it working and does it lock or put in a new bootloader?
I have. It's a little laggy at times, gets really hot when using it while charging and battery drains a little faster. Not sure about the bootloader
i4get75 said:
I have. It's a little laggy at times, gets really hot when using it while charging and battery drains a little faster. Not sure about the bootloader
Click to expand...
Click to collapse
I think I will hold off for a while. My stock NK1 is laggy enough as is. Damn, I wish there was a compatible ASOP ROM available for this phone.
Honestly, this Samsung G5 is the absolute worst phone I have ever owned! I would like to get a S6, but my experience has been so bad with this S5, I am almost afraid to stick with Samsung. However, my S3 was awesome!
Just found out that the heart rate sensor is active when the phone is on no matter if S Health is open or not.
I am in the Richmond area on Ntelos. They have stated they have sold their bandwidth to T-Mobile and we are to find another carrier. My phone is not even a year old and no other carrier will activate it. Being I own mine outright and paid close to $600, I am about to lose my mind knowing that I will have a shiny expensive very small tablet in a few months. Has anyone a clue how to change this phone over to GSM or something useful. Verizon refused to even try, though I know when I tried Straight Talk's Verizon Sim it did dial to Verizon's customer service. But Straight Talk nor Verizon would activate it.
Ideas and suggestions welcome.
puterdoc said:
I am in the Richmond area on Ntelos. They have stated they have sold their bandwidth to T-Mobile and we are to find another carrier. My phone is not even a year old and no other carrier will activate it. Being I own mine outright and paid close to $600, I am about to lose my mind knowing that I will have a shiny expensive very small tablet in a few months. Has anyone a clue how to change this phone over to GSM or something useful. Verizon refused to even try, though I know when I tried Straight Talk's Verizon Sim it did dial to Verizon's customer service. But Straight Talk nor Verizon would activate it.
Ideas and suggestions welcome.
Click to expand...
Click to collapse
page plus,i am an ntelos dealer and pageplus dealer i flash phones to and from both companies everyday i am in ruckersville va 12 mile north of charlottesville lemme know if you need help you right its the enitre eastern side of the companyh is gone now to tmobile but you can still activate on frawg..ive done many for customers
Thanks for the info. I am on the frawg side of things now. Their plans were too much when mine ended and I didn't need a phone at the time. Then a few years later, yeah I made my S1 last almost 4 years, I bought the S5 late last year outright. Loved the S1. Made that do everything it just did everything slow at the end.
Anyway, am glad there are options of some sort. Have been reading the reviews of pageplus. What kind of speeds are you getting on it with 4G? Their map shows coverage everywhere which makes me a bit uneasy, as in too good to be true. Is it a simple flash or require editing?
If I can't do something else with the phone, I may try the band opening options. According to the phone specs, it should already have all the Verizon bands but they refuse to activate it due to the meid it seems. I have a feeling this topic may get more viewers as the Ntelos off switch day comes closer.
Google Fit was the culprit for the heart rate sensor staying on. Un-installed it and fixed it
After all this time, has anybody found a ROM that works well on this phone?
can't get data so Internet not working on galaxy s5 unlocked already switched ntelos
njdan30 said:
page plus,i am an ntelos dealer and pageplus dealer i flash phones to and from both companies everyday i am in ruckersville va 12 mile north of charlottesville lemme know if you need help you right its the enitre eastern side of the companyh is gone now to tmobile but you can still activate on frawg..ive done many for customers
Click to expand...
Click to collapse
My internet is not working but I can get talk and text
In case nobody has seen this, there is a now a CyanogenMod 5.1.1 ROM available now for nTelos. I have been running it for 3 days now and I really like it. Good battery life too. Very stable and very speedy. There are some occasional bluetooth audio stuttering issues, but nothing terrible.
See this thread.
http://forum.xda-developers.com/gal...ent/unofficial-cm-12-1-g900r7-inland-t3255191
FYI, Cyanogenmod 13.0 (Android 6.0.1) is available for nTelos and C-Spire (and other) devices here. http://forum.xda-developers.com/gal...ent/unofficial-cm-12-1-g900r7-inland-t3255191
Sucks for ntelos customers bring forced into sprint at least the CDMA phones and iphones are unlocked
Sent from my SM-G935F using XDA-Developers mobile app
---------- Post added at 03:56 AM ---------- Previous post was at 03:52 AM ----------
njdan30 said:
page plus,i am an ntelos dealer and pageplus dealer i flash phones to and from both companies everyday i am in ruckersville va 12 mile north of charlottesville lemme know if you need help you right its the enitre eastern side of the companyh is gone now to tmobile but you can still activate on frawg..ive done many for customers
Click to expand...
Click to collapse
Sorry it's been a year only thing needed was a sim card and set apns it'll be 3g but beats a paper weight it'll get evdo and ehrpd speeds some cases you can get lte but very limited areas
Sent from my SM-G935F using XDA-Developers mobile app

I cannot get LTE to any APN work right with any custom ROM on the Moto G4 Play. :(

I have the Moto G4 Play (XT1607) (Harpia) and I have decided to flash LineageOS (lineage-14.1-20170131-nightly-harpia-signed.zip) on it using TWRP v3.0.2 r5. After getting it installed I noticed that it was not connecting to my 4g LTE Internet (I have Ting). So I figured I needed to make some changes to the APN settings. So I go to Settings>... More> Cellular Networks and the moment I click on "Cellular networks" I get an error message saying "com.android.phone has stopped". After reflashing and trying again a few times with the same result, I tried using a completely different ROM. AOKP. (aokp_harpia_nougat_nightly_2017-01-31.zip) and I ran into the same exact problem I was having with LineageOS.
I then tried to see if I could force my way into the APN configuration using an app called "Change APN". This worked, but now I see the message "Access Point Name settings are not available for this user". I decided to ignore this and click on the + to create a new APN. After filling the correct info out for Ting APN, I click on "Save"... and it doesn't save at all.
I decided to revert to the stock rom, and everything works perfectly fine with the stock rom. 4G LTE on Ting works fine. Whenever I try using a custom ROM of any kind, I run into the problem I described above. I don't know if I am forgetting to do something, or completely doing something wrong. I could use some help with this guys.
Isn't Ting a Sprint service? I didn't think CDMA-based networks had APN settings to configure. Verizon and US Cellular have always used *22XXX for programming, as far as I can remember.
mkollersms said:
Isn't Ting a Sprint service? I didn't think CDMA-based networks had APN settings to configure. Verizon and US Cellular have always used *22XXX for programming, as far as I can remember.
Click to expand...
Click to collapse
Yes. Ting is a Sprint service. Well either way LTE isn't working and the 3G keeps randomly turning on and off whenever I use a custom ROM. However, when I use Stock firmware, everything works perfectly fine. I am unsure what is causing the issue.
It seems nearly all custom ROMs at this point are having data connectivity issues. I'm trying to find a nandroid of the original xt1607 rom so I can just go back until its all sorted out.
mkollersms said:
Isn't Ting a Sprint service? I didn't think CDMA-based networks had APN settings to configure. Verizon and US Cellular have always used *22XXX for programming, as far as I can remember.
Click to expand...
Click to collapse
With Ting you can choose to use Sprint or T-Mobile. I am using the T-Mobile side of Ting and you do need to add Ting's APN settings for it to work. I am still on factory ROM but watching closely to see what others are experiencing with custom ROMs.
n76 said:
With Ting you can choose to use Sprint or T-Mobile. I am using the T-Mobile side of Ting and you do need to add Ting's APN settings for it to work. I am still on factory ROM but watching closely to see what others are experiencing with custom ROMs.
Click to expand...
Click to collapse
I haven't noticed any issue with my GSM ting service on lineage. I get LTE and the WiFi/LTE handoff seems to work. I don't install many apps and don't let them run in the background, so perhaps there's a conflict between them that's shutting down LTE service. This is just a guess.
Anyone have any information pertaining to this subject? I've searched hours on hours to no avail. I run U.S. Cellular and on the newest RR-5.8.1-OMS after I go to Settings>More>Cellular Networks>Crash. Every time. Resets my radio and picks right back up again. Everything works until I'm in my house, then I'm roaming and there's no way to manage in settings because of the crash.
I looked around in the file system and in /data/data/com.android.phone/ there is no files, no .db files or anything. I don't know of there's supposed to be either. But like OP stated, stock rom is flawless.
Would I be and to copy com.android.phone from stock and restore after flashing? I don't know what to do but this is with every single custom ROM out right now on every release. Data and everything works fine as far as I can tell but just no way to configure the settings. Any help would be greatly appreciated!!!
[email protected] said:
Anyone have any information pertaining to this subject? I've searched hours on hours to no avail. I run U.S. Cellular and on the newest RR-5.8.1-OMS after I go to Settings>More>Cellular Networks>Crash. Every time. Resets my radio and picks right back up again. Everything works until I'm in my house, then I'm roaming and there's no way to manage in settings because of the crash.
Click to expand...
Click to collapse
Just out of curiosity, have you tried the *22XXX thing yet?
EDIT: Just so we're clear, with you all who have CDMA phones, when you go into "IMEI Information," it does show both an IMEI and an ICCID, right? Because if not, I think I figured out why your LTE isn't working.
I tried, I tried dialing *22999 (guessing that the x stood for the 9 button in T9 language) and pressed the make a call button. Am I wrong about the "XXX" part? Because I did try that when I seen it previously in the thread earlier but had the same thoughts.
So to make that novel a shorter version, what exactly should I dial?
[email protected] said:
I tried, I tried dialing *22999 (guessing that the x stood for the 9 button in T9 language) and pressed the make a call button. Am I wrong about the "XXX" part? Because I did try that when I seen it previously in the thread earlier but had the same thoughts.
So to make that novel a shorter version, what exactly should I dial?
Click to expand...
Click to collapse
It depends on the carrier and the model of the phone. For most Tracfones, it's *22890. For US Cellular, I've seen it as *228 and *22894. You may have to call your carrier and ask what their phone programming code is.
Aaah ok I got you now. Yes I've tried that on nearly every ROM. Matter of fact I just noticed I posted a little off topic almost, but I'm here for the relevance of com.android.phone crashing EVERY SINGLE TIME I try to open Cellular Networks. The only ROM I will say it doesn't force close on is the Slim Nougat ROM, but I don't run that because instead of Cellular Networks settings making com.android.phone crash its when you place a call and then it force closes the UI part of the call but still carries the call through. I forgot to mention that by the way, whatever it is in Slim that is the making the different reason for force closing com.android.phone could probably be a pretty easy red flag for someone better equipped for this Lind of troubleshooting than myself!
Thank you for the suggestion though on the *22(8 in my case)
[email protected] said:
Aaah ok I got you now. Yes I've tried that on nearly every ROM. Matter of fact I just noticed I posted a little off topic almost, but I'm here for the relevance of com.android.phone crashing EVERY SINGLE TIME I try to open Cellular Networks. The only ROM I will say it doesn't force close on is the Slim Nougat ROM, but I don't run that because instead of Cellular Networks settings making com.android.phone crash its when you place a call and then it force closes the UI part of the call but still carries the call through. I forgot to mention that by the way, whatever it is in Slim that is the making the different reason for force closing com.android.phone could probably be a pretty easy red flag for someone better equipped for this Lind of troubleshooting than myself!
Thank you for the suggestion though on the *22(8 in my case)
Click to expand...
Click to collapse
After I posted that, I went back to try and see if Lineage was able to pick up my phone's MEID (even though I use a GSM SIM, the MEID is still tied to the phone hardware). For some reason, Lineage is not reading it, and I think all of your problems are being attributed to that fact.
The way CDMA phones work (and god, do I hate this), is your 2G/3G network is tied to the phone MEID, while the LTE SIM is data only. The OS needs to read both the 14-digit MEID (sometimes shows as a 15 digit IMEI where last digit is 0) as well as the 20 digit ICCID (SIM Number). A phone may also use the SIM number itself as an IMEI (BYOP SIMs do this) by dropping the first five digits of the 20 digit SIM number.
If you phone is showing only one 15 digit number in the system settings, then it's either the MEID OR the SIM, not both. So either you have calling and no LTE, or LTE and no calling. You can't program APN settings because the phone has no idea what ID number to tie APN settings to. This is actually a rather serious conundrum.
Ok ok, makes sense. I checked my Status info, every ROM has dual SIM capability by the way so I don't know if that would effect anything for xt-1607, but I looked at SIM slot 1 info and it reads my MEID correctly with 14 digits. I couldn't find anything about ICCID. My head pounding question here though, why in the hell (pardon the language) is everything flawless on stock, but on every ROM this problem occurs? Here's my next killer, everything works like it should for me, LTE, 3G, Calls, SMS/MMS, just can't change any of the settings due to a force close, AND I put my friends Straight Talk SIM in and it fired right up with no force close when going to change Network settings...?!
[email protected] said:
Ok ok, makes sense. I checked my Status info, every ROM has dual SIM capability by the way so I don't know if that would effect anything for xt-1607, but I looked at SIM slot 1 info and it reads my MEID correctly with 14 digits. I couldn't find anything about ICCID. My head pounding question here though, why in the hell (pardon the language) is everything flawless on stock, but on every ROM this problem occurs? Here's my next killer, everything works like it should for me, LTE, 3G, Calls, SMS/MMS, just can't change any of the settings due to a force close, AND I put my friends Straight Talk SIM in and it fired right up with no force close when going to change Network settings...?!
Click to expand...
Click to collapse
I think you just answered your own question. As stated in PCMag back in 2015, "Nobody makes a Dual-Sim phone compatible with Sprint or Verizon." It legitimately believes your MEID is a GSM-based IMEI, and is attempting to cross the streams, so to speak. And the only way your friend's StraightTalk SIM would work is if it was piggybacking off ATT or TMo's networks (the MEID would have been paired to the other phone causing a mismatch).
If you look at the stock ROM for this phone, you will see a BUNCH of system apps for programming Sprint and Verizon network information. They never made it into the custom ROMs we're using. FWIW, here's my thoughts on the matter. Someone needs to go back and make a single-SIM variant of these ROMs, as well as a flashable ZIP containing the necessary APKs for Android to detect the necessary information correctly. And if that doesn't happen, then everyone who bought an XT-1607 has to ditch their carrier and move to a GSM carrier.
That makes complete and total sense! Because I wasn't thinking this while time of it but I was in Oklahoma at the time where the main towers are AT&T, matter of fact Sprint and U.S. Cellular lose almost all signal right when you hit the county line where I was at. Verizon only gets signal because it's Verizon, lol. Reason I say that is because I was wondering why this whole time I has full signal with LTE coverage and completely list everything when I went hone, because where I live is complete opposite, there is hardly any GSM coverage, we don't even have an AT&T store, just Verizon, Sprint, USC.
So, with that being figured out, my laptop just recently kicked the bucket on me so I'm out for the most part, I do have a trick to swap files in and out of a compressed archive without extracting it in any way! But, it takes a while, not too much longer I guess but nowvi just remembered everything is pretty much .dat files so nevermind that.
Not that this thread isn't the most popular, but where would be the best place to take this request too to get the most attention from it? I mean if I had to go back to stock, so be it, but I'm a little spoiled to the custom life. Lol.
[email protected] said:
Not that this thread isn't the most popular, but where would be the best place to take this request too to get the most attention from it? I mean if I had to go back to stock, so be it, but I'm a little spoiled to the custom life. Lol.
Click to expand...
Click to collapse
IIRC, there is a Verizon thread with 80ish replies, but I think a developer like Squid might need to be made aware of this, so I might copy this into the Lineage thread.
A bit of good news. While reflashing all the time that were force closing when opening cellular networks, I looked in /data/data/com.android.phone/ and was looking, now remember to go back to that directory after I say all this, I found that directory was empty, on all of the Roms. Was curious so I flashed back to stock. Went to the same directory, BOOM! com.android.phone was not empty, in that folder I found 2 folders that were now populated with in:
1: (/files/ )I now had a file named carrierconfig-com.android.carrierconfig- (and after the dash was my ICCID number) so for this directory I need /data/data/com.android.phone/files/carrierconfig-com.android.carrierconfig**ICCID** (replace **ICCID** my ICCID number)
2: then there was this /data/data/com.android.phone/shared_prefs/_has_set_default_values.xml
and
phone/shared_prefs/com.android.phone_preferences.xml
These files are missing on all the Roms, I know this doesn't since everything, but I know for almost a fact it's a good chunk of something that needs to be available. Can I copy these files and move them into place, and set permissions how they were? I ran out of time tonight, and am busy all week so this is mainly for reference I guess. More research told me these files can be edited to change what is available to configure in cellular network settings like option to change from 2G, 3G, LTE, APN, and so on. Sorry for the mess, that's all I have for right now.
[email protected] said:
These files are missing on all the Roms, I know this doesn't since everything, but I know for almost a fact it's a good chunk of something that needs to be available. Can I copy these files and move them into place, and set permissions how they were? I ran out of time tonight, and am busy all week so this is mainly for reference I guess. More research told me these files can be edited to change what is available to configure in cellular network settings like option to change from 2G, 3G, LTE, APN, and so on. Sorry for the mess, that's all I have for right now.
Click to expand...
Click to collapse
That is definitely a major find! My only concern is even if you do that, there might be further missing components that would cause Dialer to crash on startup or some other wacky side effect. However, if you can make it work, then it's possible the proper APN settings will load by default and you'll no longer need to change them.
If you can, go into the System Apps on the stock ROM and look for any APKs branded by/with Sprint, VZW or USCellular, or anything CDMA related. They might be necessary for reading the SIM's ICCID.
That's what I was thinking too, and sadly for me I don't really know EVERYTHING to look for so it'll be mostly out of trial and error for me to figure it out. I wish they didn't compress Roms into .dat so I could use a root explorer to swap between tabs rather than copy, flash the rom, paste files and then if that didn't work start all over on restoring stock, so on and so forth. I miss my laptop. =(
Updates?
Has anyone looked into this further? I'm experiencing the same problem with the latest LineageOS nightly. US Cellular Prepaid with an XT1607.
I noticed that in my case i had to skip the Insert Sim thing on 1st boot. It never did whatever it wanted to there. (Maybe because I have no signal or weak roaming where I live?)
I'm seriously considering trying it from an area that I have good service in..

Verizon Essential stuck in 3G after the upgrade

Before I updated via OTA to 8.1 the Essential was connecting to LTE without issue. Since 8,1 I have to connect to CDMA and 3g in order to user my Dialer, otherwise Server Error is generated. No calls in or out.
I wanted to downgrade Yes rebooted, factory reset, etc.
I searched google up and down with no real answers that work. How do I get Sideload working again? It has to be a simple configuration or driver problem I will assume.
Thanks
Im in the same situation you are in also im on 3g at 1.50mbs up & down i have searched every where....
Exxeviant said:
Im in the same situation you are in also im on 3g at 1.50mbs up & down i have searched every where....
Click to expand...
Click to collapse
Here you go
https://forum.xda-developers.com/showpost.php?p=74920423&postcount=506
wolfu11 said:
Here you go
https://forum.xda-developers.com/showpost.php?p=74920423&postcount=506
Click to expand...
Click to collapse
Thanks. Still stuck using 3G. I can connect to 4G/LTE but cannot make phone calls as I still get the Server Error, Try Again.
Bigdny said:
Thanks. Still stuck using 3G. I can connect to 4G/LTE but cannot make phone calls as I still get the Server Error, Try Again.
Click to expand...
Click to collapse
I wrote that post that he referred you to, and while it worked in Oreo 8.0 it does not seem to work in 8.1 for me either.
Try this:
dial *228 and get a PRL update
reboot
*#*#4636#*#* (it may take a few seconds for it to come up if you do it right after a reboot)
set it to LTE/WCDMA
reboot
(you may have to check in mobile network settings that your APN is set to VZWINTERNET)
Let me know how it works out for you. I know that Verizon doesnt support WCDMA, but it forces you over to the Verizon LTE bands which is more or less the goal of this. For some reason this functions differently than any of the other settings that include LTE in them (believe me, I've tried them).
wolfhelm said:
I wrote that post that he referred you to, and while it worked in Oreo 8.0 it does not seem to work in 8.1 for me either.
Try this:
dial *228 and get a PRL update
reboot
*#*#4636#*#* (it may take a few seconds for it to come up if you do it right after a reboot)
set it to LTE/WCDMA
reboot
(you may have to check in mobile network settings that your APN is set to VZWINTERNET)
Let me know how it works out for you. I know that Verizon doesnt support WCDMA, but it forces you over to the Verizon LTE bands which is more or less the goal of this. For some reason this functions differently than any of the other settings that include LTE in them (believe me, I've tried them).
Click to expand...
Click to collapse
Well I reset my PRL via *228 and sure enough selecting 4G/LTE does put us at LTE/wcdma but my phone functions perfectly. I do notice the menus are changed and I got a couple other options though now. See attached
wolfu11 said:
Well I reset my PRL via *228 and sure enough selecting 4G/LTE does put us at LTE/wcdma but my phone functions perfectly. I do notice the menus are changed and I got a couple other options though now. See attached
Click to expand...
Click to collapse
Yep those are how the menu should look for a device that's not locked to sprint. It seems to me there are some firmware files that prefer sprint in these beta builds, because even on other carriers (and more than one person has said this) you can see 'sprint' pop up in the bar or in the settings even when you arent on sprint.
Interesting that yours gives you the option of 'wifi calling provisioned', I cant get that to not be greyed out on mine.
wolfhelm said:
Yep those are how the menu should look for a device that's not locked to sprint. It seems to me there are some firmware files that prefer sprint in these beta builds, because even on other carriers (and more than one person has said this) you can see 'sprint' pop up in the bar or in the settings even when you arent on sprint.
Interesting that yours gives you the option of 'wifi calling provisioned', I cant get that to not be greyed out on mine.
Click to expand...
Click to collapse
Yeah I've screwed with this phone so much I don't know what I did LOL but now it shows wifi calling even in dialer. I'm not sure if it really works cuz I have a good signal so it never switches. My e911 address is set up from my Moto z and I do have a wear24 watch tied to this phone not sure if that's what triggered it. ? I did get a new SIM card on Monday as well because I was fighting with the vzw crap so I don't know exactly what triggered the WiFi calling.
wolfhelm said:
I wrote that post that he referred you to, and while it worked in Oreo 8.0 it does not seem to work in 8.1 for me either.
Try this:
dial *228 and get a PRL update
reboot
*#*#4636#*#* (it may take a few seconds for it to come up if you do it right after a reboot)
set it to LTE/WCDMA
reboot
(you may have to check in mobile network settings that your APN is set to VZWINTERNET)
Let me know how it works out for you. I know that Verizon doesnt support WCDMA, but it forces you over to the Verizon LTE bands which is more or less the goal of this. For some reason this functions differently than any of the other settings that include LTE in them (believe me, I've tried them).
Click to expand...
Click to collapse
Thank you for the steps but still cannot use 4G for phone calls, but it does work for internet, facebook, email,etc.
Have to go back to 3G for phone calls.
Very interesting why it happening and not widespread. No special configurations or setups on my phone.
Bigdny said:
Thank you for the steps but still cannot use 4G for phone calls, but it does work for internet, facebook, email,etc.
Have to go back to 3G for phone calls.
Very interesting why it happening and not widespread. No special configurations or setups on my phone.
Click to expand...
Click to collapse
Are you on 8.0 or 8.1?
wolfhelm said:
Are you on 8.0 or 8.1?
Click to expand...
Click to collapse
I upgraded to 8.1 via OTA. No root, no rom.
Bigdny said:
I upgraded to 8.1 via OTA. No root, no rom.
Click to expand...
Click to collapse
That's where I'm at too... the one thing that might be different about this is I tried my old steps first before figuring out how to get it to work with these new ones... seems like a lot of effort, but it might be what is needed (or some amount of it) to get it all working. So try going through the old ones before the new ones (you probably dont need to *228 again since you just did)
My old steps linked here (these worked in 8.0, if they work for you in 8.1, more power to you, but they dont work for me):
https://forum.xda-developers.com/showpost.php?p=74920423&postcount=506
I'm still routinely messing with it because I feel like the setting I have now prevents me from falling back to CDMA if LTE is unavailable for some reason. Fortunately that is a rarity for me... but I maintain that Essential has something in the ROM itself that is preferring sprint and I think it's screwing with us using Verizon.
wolfhelm said:
That's where I'm at too... the one thing that might be different about this is I tried my old steps first before figuring out how to get it to work with these new ones... seems like a lot of effort, but it might be what is needed (or some amount of it) to get it all working. So try going through the old ones before the new ones (you probably dont need to *228 again since you just did)
My old steps linked here (these worked in 8.0, if they work for you in 8.1, more power to you, but they dont work for me):
https://forum.xda-developers.com/showpost.php?p=74920423&postcount=506
I'm still routinely messing with it because I feel like the setting I have now prevents me from falling back to CDMA if LTE is unavailable for some reason. Fortunately that is a rarity for me... but I maintain that Essential has something in the ROM itself that is preferring sprint and I think it's screwing with us using Verizon.
Click to expand...
Click to collapse
There is something there.
I've done that procedure.
If I go into the menu and play around it will try to connect to sprint even with a Verizon SIM. Go figure?
tech_head said:
There is something there.
I've done that procedure.
If I go into the menu and play around it will try to connect to sprint even with a Verizon SIM. Go figure?
Click to expand...
Click to collapse
Exactly. If I leave it on certain settings it'll actually sit there and tell me I'm connected to Sprint.
wolfhelm said:
Exactly. If I leave it on certain settings it'll actually sit there and tell me I'm connected to Sprint.
Click to expand...
Click to collapse
I just reported this to Essential in their beta feedback.
Others should report their similar issues.
It seems to be associated with them making a unified release.
If you look at some releases they are specifically for Sprint or Not.
tech_head said:
I just reported this to Essential in their beta feedback.
Others should report their similar issues.
It seems to be associated with them making a unified release.
If you look at some releases they are specifically for Sprint or Not.
Click to expand...
Click to collapse
That's a good point, I have reported as well.
tech_head said:
I just reported this to Essential in their beta feedback.
Others should report their similar issues.
It seems to be associated with them making a unified release.
If you look at some releases they are specifically for Sprint or Not.
Click to expand...
Click to collapse
Doing the same right now. Just glad Im not the only one having the problem.
Bigdny said:
Thank you for the steps but still cannot use 4G for phone calls, but it does work for internet, facebook, email,etc.
Have to go back to 3G for phone calls.
Very interesting why it happening and not widespread. No special configurations or setups on my phone.
Click to expand...
Click to collapse
Try turning off Enchanted 4G LTE Mode. It's possible going to 8.1 just reset this setting to on. This should only be on if you have HD Voice enabled on your line on Verizon (you'll have to call Verizon to enable it, it's a free feature).
This should fix server error on 4G, randomly connecting to Sprint is a separate issue.
UPDATE Now working
Took the advice from someone on Reddit who had the same problem. Ran to VZW store and received a new SIM. Without any programming on my end or reboot, back to LTE without issue. FINALLY. As soon as the rep popped in the SIM the essential connected on its own.
Bigdny said:
Took the advice from someone on Reddit who had the same problem. Ran to VZW store and received a new SIM. Without any programming on my end or reboot, back to LTE without issue. FINALLY. As soon as the rep popped in the SIM the essential connected on its own.
Click to expand...
Click to collapse
Just wanted to second this post that a new sim card is the key to solving this issue. In my case, I was using Red Pocket CDMA (VZW network), and I ran into the same problem. Red Pocket rep explained to me that my sim got provisioned to 3g only and that I needed a new sim to connect to LTE. As soon as we switched to a new sim, I got LTE. I hope this helps others.

Categories

Resources