Related
Hello There!!
I was trying to get back to stock rom
And Always Getting this no space error 5069 While Flashing
After searching i found that format will fix this and i can flash like a charm
But after formatting my Device Is dead
no boot, no charging, no recovery
I'm Trying TO whole flash but I'm there is no option for that only Getting without bootloader one
Then i've checked it memory in memory test option now i'm getting
Nand Flash Not Detected
Plz!!! tell me what i can do to take my phone back to life
The Phone is out of warrenty
Same thing happend with me.
Use format+download all in SPFlashTool (with the same stock ROM), then do a firmware upgrade in SPFT with the same ROM.
Shahbaz23 said:
Use format+download all in SPFlashTool (with the same stock ROM), then do a firmware upgrade in SPFT with the same ROM.
Click to expand...
Click to collapse
Thanks for replying, i almost lost my hope of fixing this problem
Now after trying it says:
1) after format+download it says no space error
2)then i tried firmware upgrade i'm getting " Failed to get PMT info " and "Invalid partition table" error in spft v3.xx
I've found many users are facing this problem, if it will fix here it will be great help for them
Just tell me what to do next
lexileone said:
Thanks for replying, i almost lost my hope of fixing this problem
Now after trying it says:
1) after format+download it says no space error
2)then i tried firmware upgrade i'm getting " Failed to get PMT info " and "Invalid partition table" error in spft v3.xx
I've found many users are facing this problem, if it will fix here it will be great help for them
Just tell me what to do next
Click to expand...
Click to collapse
K, Try this for a change...
Assuming u already have all the required drivers installed (get it via google search, if not), use the latest sp flash tool (it does matter), browse your scatter file (i recommend u use the Stock JB/KK/LP) and goto the format tab (next to the download tab) and do an auto format. Now goto the download tab and do a format all+download and finally firmware upgrade (all this without the battery)... Now start your phone. This works fine for me when my phone get soft-bricked. However u must remember that formatting all may have risk of your NVRAM getting formatted and so loss of IMEI, but you can always have it fixed via AT command.
Shahbaz23 said:
K, Try this for a change...
Assuming u already have all the required drivers installed (get it via google search, if not), use the latest sp flash tool (it does matter), browse your scatter file (i recommend u use the Stock JB/KK/LP) and goto the format tab (next to the download tab) and do an auto format. Now goto the download tab and do a format all+download and finally firmware upgrade (all this without the battery)... Now start your phone. This works fine for me when my phone get soft-bricked. However u must remember that formatting all may have risk of your NVRAM getting formatted and so loss of IMEI, but you can always have it fixed via AT command.
Click to expand...
Click to collapse
Thanks for replying :cyclops:
I was using spft ver 5.1516.00
while auto format i was getting errors, in v5 it says BROM ERROR: S_DL_READ_PT_FAILE(5073), only v3.1328 can format it successfully while others v3 are getting invalid range error[I think this place will give some clue of what's happening]
ok then in format+download section( using spft V5)
format 100%
boot loader 100%
just after few seconds again no space error
Now in firm-upgrade section
again error failed to get pmt info
thanks for trying mate
now I have some hope for this device to be fixed
i'm not worrying about imei
anybody there plz bring my phone back to life
Help Guys I'm waiting for Ur Replies
PLzz!!
lexileone said:
Help Guys I'm waiting for Ur Replies
PLzz!!
Click to expand...
Click to collapse
Given your desperate condition, go with this:
Re-install the drivers and spftool from here: http://d-h.st/7CL
Use a different USB wire (maybe your I/O port of USB wire is damaged, happened with me once).
Then retry the method listed above of formatting, downloading and upgrading.
Hope this helps.
P.S.: I am not an expert so I couldn't understand the errors, but looks like these are common errors so you should get your phone back alive. :good:
Shahbaz23 said:
Given your desperate condition, go with this:
Re-install the drivers and spftool from here: http://d-h.st/7CL
Use a different USB wire (maybe your I/O port of USB wire is damaged, happened with me once).
Then retry the method listed above of formatting, downloading and upgrading.
Hope this helps.
P.S.: I am not an expert so I couldn't understand the errors, but looks like these are common errors so you should get your phone back alive. :good:
Click to expand...
Click to collapse
still getting invalid Pmt error on firm upgrade
and no space in download
plz help
Facing the exact same problem with my phone too.. Someone please help.
Is there any senior members who can help us?
Make full format (including calibration data & boot loader) then flash with jellybean
Auto format not make full format some data is not earse . make full format then flash with jellybeam stock rom
(Use latest sp flashtool
Without battery
Check Usb pin & cable are rightly connected )
Chinmayhegde said:
Auto format not make full format some data is not earse . make full format then flash with jellybeam stock rom
(Use latest sp flashtool
Without battery
Check Usb pin & cable are rightly connected )
Click to expand...
Click to collapse
But how
i can't see format with bootloader option in format tab
Is there Any other way to do this(may be manual format will work, but dont Know How to do)
This problem needs to be solved
Well thanks for trying
I hope we will get rid of this problem soon
lexileone said:
But how
i can't see format with bootloader option in format tab
Is there Any other way to do this(may be manual format will work, but dont Know How to do)
This problem needs to be solved
Well thanks for trying
I hope we will get rid of this problem soon
Click to expand...
Click to collapse
are you triad manual format including calibration data?
Chinmayhegde said:
are you triad manual format including calibration data?
Click to expand...
Click to collapse
Yes, the format was successful but still get same errors while downloading
PLz guyz Help !!!
lexileone said:
Yes, the format was successful but still get same errors while downloading
PLz guyz Help !!!
Click to expand...
Click to collapse
Change your stock rom for flashing kitkat or jellybean / wiko_rainbowlollipop official stock rom
use older spflash tool
then also u get same error service center is a batter option
Chinmayhegde said:
Change your stock rom for flashing kitkat or jellybean / wiko_rainbowlollipop official stock rom
use older spflash tool
then also u get same error service center is a batter option
Click to expand...
Click to collapse
In service center people are saying its board fault and it have to be replaced (pricing 3K)
But i'm sure the board is working
its any other problem
Have u tried both versions of sptools .format and download should work.try a different cable.if nothings working try adb from pc
micromax a120 1931 said:
Have u tried both versions of sptools .format and download should work.try a different cable.if nothings working try adb from pc
Click to expand...
Click to collapse
Thankz tell me more about adb from pc
lexileone said:
Thankz tell me more about adb from pc
Click to expand...
Click to collapse
1. Download SP flash tool (I think you already have) and Smartphone multiport download tool = http://www.mediafire.com/?1ycvu9ywv7vjnhv.
2. Open and run as admin - SPMultiPortFlashDownloadProject.
3. Click file, open download agent name' and add 'MTK_AllInOne_DA.bin'.
4. Open factory database and select the .mdb file.
5. Click scatter file - and select the .txt scatter file.
6. Then the 'top three boxes (LCD and camera driver) . You click last - ???????? button and unlock it for changing driver parameters.
7. Remember the 1st box for back camera, 2nd box for front camera, 3rd box for display driver.
8. My recommended :
under sensor 1 selectv5647_raw
under sensor 2 select:hi704_yuv
under sensor 3 select:T050UWV014NS or if it doesnt work LM050AMYBO1E
(if doesnt work change again and again)
9. Select high speed and no battery (I think no need to do).
10. Simply close the Tool. then open, SP flash tool
11. Select scatter loading, and load the same 'scatter file' , which you previously opened in the 'multiport download tool'
12. SELECT 'UBOOT' ONLY AND NOT SELECT OTHER ALL PARAMETERS. THEN CLICK DOWNOAD.
Then reboot your phone and check... display is ok ?
If not ok, Then again open smartphone multiport download tool and change the display driver and do the same all things previously.
You have to do repeatly, until, you are getting display normal.
The same thing for camera's working also. Do this ..I doubt adb will work just temme if it fixes it...
Elephone P9000
Hi Guys I need your help urgently please with my elephone p9000
I am stuck really , I got this phone and tried to root it using kingo and now it is stock on the booting logo , I tried to follow your guide and no success!! can you help me how to flash it using adb method for example.
so far
1- phone boots up
2- getting stuck on the company logo while loading
3- tried flashing it using SP flash tool and downloaded the stock rom and still no success.
4- can you help me on how to flash it using the adb.
would appreciate a detailed step by step for beginners
Many thanks
why would you use kingo root in the first place anyway haha... and i've been looking around to see if P9000 can be rooted... havnt found an answer yet ...the phone is still somewhat in presale so maybe later on when more people get their hands on it.
willngg said:
why would you use kingo root in the first place anyway haha... and i've been looking around to see if P9000 can be rooted... havnt found an answer yet ...the phone is still somewhat in presale so maybe later on when more people get their hands on it.
Click to expand...
Click to collapse
Root is now available for the P9000: http://bbs.elephone.hk/thread-9919-1-1.html
(I see you've already commented on the main thread. Just posting the link here for people in the future )
a.cid said:
Root is now available for the P9000: http://bbs.elephone.hk/thread-9919-1-1.html
(I see you've already commented on the main thread. Just posting the link here for people in the future )
Click to expand...
Click to collapse
yea i saw thanks man i was roaming around bbs forum and found it haha.. now my only problem is xposed framework doesnt work well
willngg said:
yea i saw thanks man i was roaming around bbs forum and found it haha.. now my only problem is xposed framework doesnt work well
Click to expand...
Click to collapse
Which version did you install? Afaik, you'd need the 64bit zip for Android 6.0
a.cid said:
Which version did you install? Afaik, you'd need the 64bit zip for Android 6.0
Click to expand...
Click to collapse
version 80 cant get gravity box to work
does not work, scatter file gives issues
maestro2702 said:
does not work, scatter file gives issues
Click to expand...
Click to collapse
try to shorten scatter file name or place in C:/
use latest version of sp flash tools
https://androidmtk.com/smart-phone-flash-tool
download rom 20160419
https://mega.nz/#!3R0zBQAY!zkdYmMcYzps7p8gzUKVBYY9jjwNLgb6mnA9OGKRDY3E
Root using this tutorial
http://bbs.elephone.hk/thread-9919-1-1.html
Detailed instructions German (not the confused instruction of elephone.hk)
This is an detailed instruction of Root and install TWRP on Elephone P 9000 (not P 9000 lite).
Follow the link please (its in german language,translate it on any translator in your language if you need).
Big thx to the Author of the Instructions.
chinamobilemag.de/tutorials/elephone-p9000-root-twrp-tutorial.html
Have a lot....:good:
Tried it, but it did not work. tried it multiple times, it states a succes. Download OK. But when i try to start TWRP by holding vol+ and power, or vol+ and vol- and power
it just starts normally, or it gets me to the factory settings.
snoopyminou said:
This is an detailed instruction of Root and install TWRP on Elephone P 9000 (not P 9000 lite).
Follow the link please (its in german language,translate it on any translator in your language if you need).
Big thx to the Author of the Instructions.
chinamobilemag.de/tutorials/elephone-p9000-root-twrp-tutorial.html
Have a lot....:good:
Click to expand...
Click to collapse
also tried the drivers, and stuff from this page : https://elephonemobile.eu/t/how-to-root-latest-elephone-p9000-stock-rom/34
I have : Elephone_P9000_20160628 does this have to do with it ?
and i now tried a wireless update... to 20160715 but it says, it will restart in recovery mode to do the update, but then the phone keeps hanging on the ELEPHONE logo... so i can not update the phone anymore apparently... ( so something is done to the factory settings :s but not the TWRMP )
i'm gonna try now the scatt file from my firmware build that i downloaded here : http://www.android-hilfe.de/thema/o...-p9000-p9000-lite-uebersicht-download.785193/
did not work, but now i have the original recovery back on the device, and now i can do the wireless update to 20160715 so i now have latest version of my P9000 firmware... but now... still my main question how to root it that TWRP works
Help !!! i don't use the phone untill i can install xposed framework and Xprivacy on it
Hi Guys! Is it possible to do root on nugat in P9000? I try different ways but there is always a bootloop
hozumi70 said:
Hi Guys! Is it possible to do root on nugat in P9000? I try different ways but there is always a bootloop
Click to expand...
Click to collapse
Flash magisk via TWRP.
Hi.
I think my problem is unusual.
I try to install TWRP and/or root my device.
I red a few instructions in german and english.
And still nothing.
Details.
1. I have the compilation: from 2016.08.10.
2. Updater says I have new soft. I can download it 100 times. It says "downloading", then "installing" and "rebooting" but in the end nothing changes: still the same rom, still I can download and install this new soft (from 2017.1.12, 927,13 MB).
3. I can open the recovery mode. This is impossible for this device. Power+UP, Power+DOWN = doesn't matter. I see something like bootloop, but after 10-20 seconds the system is rebooting normally. No recovery.
3A. I didn't find an extra settings in "Options" which give more possibilities during turning off (for example: "restart in recovery").
As You see I can't make the backup (nesessary for me) that is why I didn't try "factory reset".
4. Instructions from Internet didn't work:
a) "MT65xx USB VCOM DRIVERS" installs some drivers but I don't have "Ports (COM&LPT) for Windows 10,
b) "SP_Flash_Tool_v5.1640_Win": no scatter file, don't know how to make it, the file from Internet didn't help,
c) "SP_Flash_Tool_v5.1640_Win": I can't tick "recovery" and any other option,
d) "Mtk_Droid_Tool_v2.5.3": it doesn't show any informations about the device.
As You see I can nothing with my P9000.
Do You have any ideas?
Hey,
Has anyone succes in unbricking a Meizu device with the mediatek sp flash tool?
I personally have a bricked MX5 (thanks to the A**hole who made the MX5 BT unlock topic)
nope... still cannot bypass the secure base-band chip problems... the only available method is to program the boot to load the original source code and to creat a
1 - android-info.txt
2- android-product.txt
specific for mx5.. im still experimenting this though.. so far no progress yet..
If we can get this working, hard bricked devices can get recovered with fastboot I think?
Is there a way I can help you?
killerbie said:
If we can get this working, hard bricked devices can get recovered with fastboot I think?
Is there a way I can help you?
Click to expand...
Click to collapse
yes, hardbrick can be recovered if only we can bypass the secure baseband chip.. im still learning the code to creat those 2 files that i mentioned earlier.. so far no good.. still need time to identify which code that can match the baseband chip pass code. i convert update.zip to aboot.img with android file.txt that i creat. but still the code are not match. there is 1 way to reset the baseband chip, but need usb tongled and removed emmc card to reset all.. thats hell of a way to do becoz its include hardware modifications. and also need few device that only availble in chinesse , not mention the language though.. for now lets hope for master yus to bring the miracles to us..
I've found another flash tool, it seems to be provided by meizu themselves with a chinese manual called: MultiUpgrade 4.8.5 bundled with MultiUpgrade 4.8.5
killerbie said:
I've found another flash tool, it seems to be provided by meizu themselves with a chinese manual called: MultiUpgrade 4.8.5 bundled with MultiUpgrade 4.8.5
Click to expand...
Click to collapse
have u tested it yet?
need help,
did anyone can help me to solve my problem with flashtool?i try to flash my homtom ht 20 pro using flashtool, but my flashtool can not download or detect my phone i try to instal media tek usb vcom but stil can not work,cos my win 10 said that driver not digitaly signed,so anyone have solution for my problem, it will greatfull if you give me a link to download another driver so i can start flash my homtom ht 20 pro, thanks
You can install unsigned drivers in windows by shift clicking while reseting windows. You will be prompted later on on various options of reboot. One of them is going to be to not enforce signed drivers. If you have any trouble finding this option, look it up "reboot not enforcce signed drivers". You will find what you need.
Discussion on problems faced by Miflash tool.
*So when used for the first time I was able to unlock phone without any problem.
*But after that when I used it for second time to unbrick my phone I was constantly getting errors like not enough memory,some errors like x800000 blah blah...
*I almost went through every solutions mentioned in miui forum and XDA...But I was unable to get it working...
So if anyone faced any problem like that comment your problem below..
Aftef a lot of research I was able to find a solution for that..
Hopefully it will be shared with you all as soon as possible. I have to finish touching up some final things..
As soon as I finish the work I will be releasing alpha version..
Will update the thread when I release it
Waiting for the solution.
https://chat.whatsapp.com/H3jQvVgU5MZCRrlOFqSlIG
My Redmi Note 3 Qualcomm Whatsapp Group
Murshad007 said:
Waiting for the solution.
https://chat.whatsapp.com/H3jQvVgU5MZCRrlOFqSlIG
My Redmi Note 3 Qualcomm Whatsapp Group
Click to expand...
Click to collapse
Hopefully I was able to make alpha version of the software...worked fine for me on fastboot mode..want some testers
Edit..was able to boot up successfully..once confirmed by some testers I will release stable one
I experienced that "Not enough memory" thing. What I did was I used the latest MiFlash tool (restarted my PC first).
exce1ia said:
I experienced that "Not enough memory" thing. What I did was I used the latest MiFlash tool (restarted my PC first).
Click to expand...
Click to collapse
Yeah I faced it many time...not enough memory, buffer size0000 error blah blah blah...hopefully I was able to develop an app for to unbrick via fastboot... tried by me 2 times worked smooth but need some testers
Mi Flash & Nougat
Hi, if you want I'm ready to test your alpha version!
I have a dead Mi5 Pro (updated to xiaomi.eu Nougat rom) that my pc only reads as Qualcomm_9008.
I already tried many many posted potential solutions but my phone is still dead!
At this point, I HOPE that the problem is that latest MiFlash (30.aug.2016) is not so compatible with Nougat and I can't flash any ROM!
Waiting for your news!
Thank you very much
cleo1986 said:
Hi, if you want I'm ready to test your alpha version!
I have a dead Mi5 Pro (updated to xiaomi.eu Nougat rom) that my pc only reads as Qualcomm_9008.
I already tried many many posted potential solutions but my phone is still dead!
At this point, I HOPE that the problem is that latest MiFlash (30.aug.2016) is not so compatible with Nougat and I can't flash any ROM!
Waiting for your news!
Thank you very much
Click to expand...
Click to collapse
https://forum.xda-developers.com/redmi-note-3/development/mi-fastboot-unbrick-tool-2-0-t3538614
Already released...
Edit use manual method..
No fastboot
adithyan25 said:
https://forum.xda-developers.com/redmi-note-3/development/mi-fastboot-unbrick-tool-2-0-t3538614
Already released...
Edit use manual method..
Click to expand...
Click to collapse
Thanks mate, but NOWAY to Fastboot here! My Mi5 is completely dead and I think in EDL because my pc can recognize it as Qualcomm device.
cleo1986 said:
Thanks mate, but NOWAY to Fastboot here! My Mi5 is completely dead and I think in EDL because my pc can
recognize it as Qualcomm device.
Click to expand...
Click to collapse
Try pressing vol down+pwr... If you see light blinking while connected to PC,that means you are in edl..
We are working on a tool that can flash through edl, the last tool was for fastboot unbrick...
In order to make sure you are in edl.connect phone to PC,open miflashtool and click refers..
If it shows something like COMXX (XX will be num) its in edl..u can flash stock rom via flashtool then
Already TRIED
adithyan25 said:
Try pressing vol down+pwr... If you see light blinking while connected to PC,that means you are in edl..
We are working on a tool that can flash through edl, the last tool was for fastboot unbrick...
In order to make sure you are in edl.connect phone to PC,open miflashtool and click refers..
If it shows something like COMXX (XX will be num) its in edl..u can flash stock rom via flashtool then
Click to expand...
Click to collapse
I already tried many times to flash in EDL via miflash but I have error 0x000..., hello packet, etc etc
PLEASE LET ME KNOW WHEN YOU HAVE EDL Tool!
Thank you very much
Ok so I have managed to brick my device pretty good (recovery seems gone), but I can get to FASTBOOT, and from there, followed a guide to get to EDL..
So now I got the mi flash tool to flash the 7.25 image as described by this guide :
https://forum.xda-developers.com/redmi-note-3/how-to/unlock-bootloader-twrp-root-7-2-3-t3359492
No errors, but I don't think it worked because when the device reboots, it still can't seem to try and load a kernel (it goes black real quick). I am hoping it that the other unmentioned fields need populating etc..
Are there instructions on how to do a complete flash from EDL anywhere ?
Rapalax said:
Ok so I have managed to brick my device pretty good (recovery seems gone), but I can get to FASTBOOT, and from there, followed a guide to get to EDL..
So now I got the mi flash tool to flash the 7.25 image as described by this guide :
https://forum.xda-developers.com/redmi-note-3/how-to/unlock-bootloader-twrp-root-7-2-3-t3359492
No errors, but I don't think it worked because when the device reboots, it still can't seem to try and load a kernel (it goes black real quick). I am hoping it that the other unmentioned fields need populating etc..
Are there instructions on how to do a complete flash from EDL anywhere ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/redmi-note-3/how-to/fix-bootloop-redmi-note-3-recovery-edl-t3521297
This will work for a complete clean flash via edl
Yep.. I managed to do something similar with a newer FB ROM and the modded twrp so there is less chance to relock my BL.
Thanks for providing the post.. it makes me feel more comfortable knowing that this info is available in case I need it again
Mi flash tool not working. Alternative ways or any tips to flash stock rom.
nilkanth.marshiwane said:
Mi flash tool not working. Alternative ways or any tips to flash stock rom.
Click to expand...
Click to collapse
Tell us why your flash tool doesn't work. Any errors? Provide screenshots
RavinduSha said:
Tell us why your flash tool doesn't work. Any errors? Provide screenshots
Click to expand...
Click to collapse
same here also bro, when i try to flash it, it complete the flashing within 1 sec or less......
please help me brother as fast as you can
i had the same problem 2 days ago.i opened the folder of the rom i ran the batch file flashh_all and it opened a cmd window and it starts flashing the phone and it works.done try this method it took me about 7 minutess
i am also facing same prblm but in my case it showing error write time out plz help