Database Users

problem in flashing firmware

I am trying to flash a firmware by following the guide here
http://forum.xda-developers.com/showpost.php?p=7152078&postcount=2
The message window in ODIN displays this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9000XWJV1_CL31216_REV03_user_mid_noship.tar.md5 is valid.
<OSM> MODEM_I9000XXJVE.tar.md5 is valid.
<OSM> GT-I9000-MULTI-CSC-OXXJV1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9000XWJV1_CL31216_REV03_user_mid_noship.tar.md5 is valid.
<OSM> MODEM_I9000XXJVE.tar.md5 is valid.
<OSM> GT-I9000-MULTI-CSC-OXXJV1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
it has been in this state for more than 20 minutes now. is this normal? if it isn't what should i do now?

Odin is pretty temperamental. Unplug the phone, take the battery out and try again...nothing has been changed just yet.

S7 Edge 935F Odin Fail

Hi Guys
Was running a custom N7 rom by Laypota decided in my wisdom that i would wipe before in updated to a new version of his rom unfortunatley i wiped more than i wanted to and now i am left with a phone that wont boot i cannot access recovery mode but can access download mode i went to samobile and downloaded a stock firmware for my phone went into odin and here is the error i am getting any help would be very appriciated thanks
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/005> Added!!

FAIL! (Auth) on Odin when flashing stock firmware

<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> emmc_appsboot.mbn
<ID:0/004> lksecapp.mbn
<ID:0/004> xbl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help not sure how to fix this...

MackyVII said:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> emmc_appsboot.mbn
<ID:0/004> lksecapp.mbn
<ID:0/004> xbl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help not sure how to fix this...
Click to expand...
Click to collapse
Change your usb cord!
Running On Samsung Galaxy S7 Edge G935A Wicked Venom

Q. problem with "Sm-n910f" galaxy note 4. doesn't start. no recovery no download mod

Q. problem with "Sm-n910f" galaxy note 4. doesn't start. no recovery no download mod
hello to all!
a friend of my friend have gave to me one samsung sm-n910f.
it wouldn't start.
i have tried many odin version and many firmware...but nothing...
when i try to put in a firmware by odin it fails and shows to me that log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/026> Odin engine v(ID:3.1101)..
<ID:0/026> File analysis..
<ID:0/026> SetupConnection..
<ID:0/026> Initialzation..
<ID:0/026> Set PIT file..
<ID:0/026> DO NOT TURN OFF TARGET!!
<ID:0/026> Get PIT for mapping..
<ID:0/026> Firmware update start..
<ID:0/026> SingleDownload.
<ID:0/026> aboot.mbn
<ID:0/026> NAND Write Start!!
<ID:0/026> sbl1.mbn
<ID:0/026> rpm.mbn
<ID:0/026> FAIL!
<ID:0/026>
<ID:0/026> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i have try to put in:
N910FXXU1BOC3_VFG1BOC2_v5.0.1_Repair_Firmware
also when i try to go in go in recovery mode because it shows to me that to connect it with kies so have a repair...
please sorry for my bad english, and please help me to upload to phone a firmwarethat works...if firmare is a old software it doesn't matter.
i want to give to my friend a smatphone that works...
thank you....

a310f odin flash stock fail, see log please, no more recovery

<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> __XmitData_Write
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
that happened twice while trying to flash stock nougat firmware after some buggy custom roms.
smart switch from samsung for drivers on windows 10 installed, com 4 connected, whenever i try to flash the 4 parted firmware (cl, bl, ap,csc) it gives me a fail after some time with log above.
thanks for any help how to get back to stock
device wants me to use emergency recovery from smart switch but end of month small bandwith left i would have liked to prevent downloading another 4gb through smart switch as i have the nougat stock files on hdd.
thanks!