Hi all,
This is what actually happend after installing H2oS 2.5.1....
Flashed h2o with twrp recovery stuck up at setup wizard...
So i used OOS unbrick tool to get back to stock but that stuck up at oneplus logo..
so next i flashed using hydrogen restore tool to 5.1.1
after that again flashed latest ver of h2os
so finally it worked..but due t few reasons i wanted to go back to oos..nothing help me
Installed TWRP on h2os 2.5.1 than copied my backup which was made with twrp dated [2016-04-08--17-02-42]
restored done setup done
then i get promp of software update oos 3.1...
tried updating and same happened null baseband null iemi.
SO went back to oos 3.0.1
Any solution you guys found out how to make thing back on track.
Unfortunately there is no way back now, have to wait for an oxygen update. But you can use cm 14.1, it works fine. Flash hydrogen 2.5 to fix your imei and install cm after.
I'm having a lot of trouble with this issue, since it starting with me logging out of snapchat, meaning my login would temporarily fail because my device was rooted and had xposed installed. I tried the normal fix to clear the settings for RootCloak and then add Snapchat back to it. But this solution had stopped working. I then misunderstood a fix for uninstalling Xposed to uninstalling root, which I ended up doing so my device had no root and xposed installed. After realizing my error and that I now can't reach TWRP recovery to try and fix it, I tried to flash it with root so that I could start it again with a fresh root. But when I first tried it, it passed, but it was stuck on the samsung s6 edge + loading screen. At that point I tried booting into recovery with Pwr+Volup+Home but it didn't work, just returned a black screen.
Now whenever I try to flash it with the stock rom to start over again, I've now tried it twice, once with a 6.0.1 stock os which failed and one with a 5.1.1 stock which also failed.
What do I do to fix this? Can someone help?
Thanks.
Please help, after install gcam mod my stock camera portrait mode disappeared. I tried to clean flash, back to nougat then update it oreo but nothing change.
I also tried to uninstall stock camera then install stock camera using magisk module but still doesn't work.
I have a Moto E4 XT1768 running Resurrection ReMix. I wanted to return to stock to take advantage of the Moto actions. My nandroid must have been corrupt because restoring to my stock backup failed. I then attempted to reflash the original stock firmware with RSD Lite but that failed on spareschunk_3 (multiple times)...even when flashing the files individually with adb.
Finally, I was able to flash the newest firmware PERRY_NPQS26.69_64_8_cid50_XT1768_7.1.1_subsidy_DEFAULT_regulatory_DEFAULT_CFC.xml.zip with RSD Lite. I was able to root it and install Magisk, but I could not install any modules. Also, I was unable to install Xposed. The security patch was from July 2018. Does the newest security patch break Magisk/Xposed? Since there were mods that I wanted installed but couldn't, I wound up reverting back to my Resurrection Remix backup...and that's where I am again.
Anyone have any idea why Magisk modules failed, and why Xposed woud not install?
P.S. I had even flashed the latest CR Droid from the telegram group, and it worked wonderfully (security patch July 2018)...but again, Magisk modules failed to install. Didn't really need them with that ROM, but what gives? On a side note, the in-call volume on CR Droid was so crazy high I had to go back to Resurrection Remix again. It was literally blowing my ears off. Editing the mixer_paths.xml did not work either.
mn1968 said:
I have a Moto E4 XT1768 running Resurrection ReMix. I wanted to return to stock to take advantage of the Moto actions. My nandroid must have been corrupt because restoring to my stock backup failed. I then attempted to reflash the original stock firmware with RSD Lite but that failed on spareschunk_3 (multiple times)...even when flashing the files individually with adb.
Finally, I was able to flash the newest firmware PERRY_NPQS26.69_64_8_cid50_XT1768_7.1.1_subsidy_DEFAULT_regulatory_DEFAULT_CFC.xml.zip with RSD Lite. I was able to root it and install Magisk, but I could not install any modules. Also, I was unable to install Xposed. The security patch was from July 2018. Does the newest security patch break Magisk/Xposed? Since there were mods that I wanted installed but couldn't, I wound up reverting back to my Resurrection Remix backup...and that's where I am again.
Anyone have any idea why Magisk modules failed, and why Xposed woud not install?
P.S. I had even flashed the latest CR Droid from the telegram group, and it worked wonderfully (security patch July 2018)...but again, Magisk modules failed to install. Didn't really need them with that ROM, but what gives? On a side note, the in-call volume on CR Droid was so crazy high I had to go back to Resurrection Remix again. It was literally blowing my ears off. Editing the mixer_paths.xml did not work either.
Click to expand...
Click to collapse
On stock, most Moto devices including this one have the f2fs loopback bug. You'll need to look for the f2fs workaround module. It's a magisk module but it needs to be flashed in TWRP.
That will allow all of your magisk modules to install properly.
Here I found it for you
https://forum.xda-developers.com/ap...icial-version-including-t3577875/post71554247
After flashing ROMs and moving around to different systems, if you want to restore one of your old stock backups, you'll probably have to format data. Not just wipe, Format.
I will look into it
TheLastAlphaUK said:
Just use sp flash tool ull never have this problem.... Fyi soon as you unlock the bootloader and flash a custom recovery just back up all partitione of the stock firmware so you can just restore no matter what happens
Click to expand...
Click to collapse
His device is Perry not Woods. So Qualcomm not mediatek
I tried again going back to stock. Used RSD lite to flash. Installed TWRP and rooted fine with Magisk. Installed the f2fs loopback patch. Seemed to work. Installed ios beta icons as a test and it installed fine. Rebooted and both Magisk modules disappeared. Tried redoing the f2fs patch again but it never showed up in the modules section, and all other Magisk modules failed to install.
I restored my Resurrection Remix back up and will stay on that.
mn1968 said:
I tried again going back to stock. Used RSD lite to flash. Installed TWRP and rooted fine with Magisk. Installed the f2fs loopback patch. Seemed to work. Installed ios beta icons as a test and it installed fine. Rebooted and both Magisk modules disappeared. Tried redoing the f2fs patch again but it never showed up in the modules section, and all other Magisk modules failed to install.
I restored my Resurrection Remix back up and will stay on that.
Click to expand...
Click to collapse
I've seen some people have that issue on the Moto G6 but not the E4. Make sure you're not wiping cache at any point. If you installed the f2fs fix it should still be in your download folder just install it through TWRP not magisk manager.
madbat99 said:
If you installed the f2fs fix it should still be in your download folder just install it through TWRP not magisk manager.
Click to expand...
Click to collapse
Tried. Didn't work. No interest in trying anymore. Sticking with Resurrection Remix.
Thanks for the replies though.
mn1968 said:
Tried. Didn't work. No interest in trying anymore. Sticking with Resurrection Remix.
Thanks for the replies though.
Click to expand...
Click to collapse
Cool.
I cant use fingerprint or any other security method. I'm on stock Jan pie. I restored this via twrp backup because I can't get aex 6.3 to work. How can I get fingerprint, of any other method to work?
When I setup a pin. The screen is still swipe to unlock.
I didn't had same problem but I actually rooted my phone and then unrooted it , but after that my phone could not update to next security update ... I tried many things but what worked for me is..
There is YouTube video from Technobuzznet
And it has the link of twrp flashable stock rom https://drive.google.com/uc?id=10HXyZ_68KAQqWn46DamlUKH9dgH2ZFZ0&export=download
Just wipe everything and flash this rom from twrp
WhatzIt2Ya said:
I cant use fingerprint or any other security method. I'm on stock Jan pie. I restored this via twrp backup because I can't get aex 6.3 to work. How can I get fingerprint, of any other method to work?
When I setup a pin. The screen is still swipe to unlock.
Click to expand...
Click to collapse
Try to flash any other custom ROM then...