Database Users

[Q] (VM) Samsung Galaxy S Victory 4G LTE

Ok long story short I wiped my stock ROM from my phone.. Samung Galaxy S Victory 4G LTE Virgin Mobile I have been trying for half a day to get answers & step-by-step instructions on how to fix my phone without success.. I have attempted to fix the issue myself again with no success. These are the steps I have taken thus far
Downloaded the following TAR
COMBINATION_L300VPALH1_L300SPRALH1_934170_REV00_user_low_ship.tar.md5
Started ODIN 3.4
Connected Device
Started the MD5 file following results
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_L300VPALH1_L300SPRALH1_934170_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> userdata.img.ext4
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
My phone says
ODIN MODE
Product Name: SPH-L300
Custom Binary: Download Yes (1)
Current Binary: Samsung Offical
System Status: Custom
Qualcom Secureboot Enable
ODIN: Invalid ext4 image
if anyone could please help, I just want my phone back so I can call my family for Christmas.
Thank You
McTavish

[Q] Flash fail odin

Hi Guys,
I have been having trouble with flashing my Note 3 64g sm-n9005. It is a international model that that Singapore (sin-tel) firmware. I have tried and failed to flash Australian stock ROM with odin3.09, 3.07 and 1.85. The output from Odin is below, as it tries to write the hidden file.
Any help would be appreciated.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENE3_N9005XSAENE1_N9005XXUENE3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

singularity.tgz said:
Hi Guys,
I have been having trouble with flashing my Note 3 64g sm-n9005. It is a international model that that Singapore (sin-tel) firmware. I have tried and failed to flash Australian stock ROM with odin3.09, 3.07 and 1.85. The output from Odin is below, as it tries to write the hidden file.
Any help would be appreciated.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENE3_N9005XSAENE1_N9005XXUENE3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
It could be the pit files don't match. Terry flashing it's region (Singapore) firmware & see what happens.

[Q] G900F - odin fail to flash Lolipop

Hello guys!
I am on stock 4.4.2
Downloaded stock rom from sm.
Tried to flash - fail at hidden.img.ext
FLASh failed.
Now i can't boot my phone.
Knox is still on 0x0
Kies doesnt recognise my phone to try recovery...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1BNL9_G900FVFG1BNL1_G900FXXU1BNL9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What to do?

The obvious answer is to flash the rom again in Odin.
If no joy with flashing Lollipop try and flash a Kitkat rom and then try flashing Lollipop again.

Try Odin 3.07
I had the same problem with 3.09, spend several hours flashing and downloading the FW again and again. I finally tried with Odin 3.07 and everything is OK.

apmos said:
Try Odin 3.07
I had the same problem with 3.09, spend several hours flashing and downloading the FW again and again. I finally tried with Odin 3.07 and everything is OK.
Click to expand...
Click to collapse
Will try now.
tried with 3.10.0 still nothing
Tried with stock 4.4.2. still the same....and on the other computer too with windows 7
before was doing on windows 8
So...odin 3.07:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1BNL9_G900FVFG1BNL1_G900FXXU1BNL9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1)

NOT GOOD AT ALL!
I can't flash any rom to G900F with odin, can't boot my phone...constantly getting FAIL (SIZE)!
What to do next?
This is info from the screen:
ODIN MODE
PN: SM-G900F
CB: Samsung Official
SS: Official
RL (KK): OFF
KWV: 0x0
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWREV
SECURE DOWLOAD: ENABLE
UDC START
Don't get it.
I have tried SPANISH firmware LOLIPOP 5.0 (unbranded) and it worked!?!
I am on Croatian VIP network, bought it there...tried to flash VIP's 4.4.2 and 5.0
and it failed everytime no matter to ODIN version....
So? What to do next? Why i am not able to flash my branded firmware?

Usually when that message appears in odin it means the the firmware you're trying to flash has not the same partitions as your memory, try to find pit file for your VIP version and then flash again using that file

Well let it fail then remove the cable put it back reset odin check repartition and flash put file.. your phone will work but i have not idea what is tha secure boot and download i am still searching.

i would like some help please.. (SOLVED)

hello there would it be possible to get some help please..
ive bought a second hand s5 g900f today which is branded with o2 uk.
im trying to get it on the 3uk firmware.
i have managed to get btu firmware on it but i would rather have the 3 branded firmware.
the problem is that when i try to flash it it fails.
on the phone it says: volume size is too big 61440 < 1228800
ODIN:INVALID ID EXT4 IMAGE
and odin says failed: here is the log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1BOB7_G900FH3G1BOA1_G900FXXU1BOB7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
ive looked around and seen that i may need to flash a pit file with the firmware
so i used the pit file named SM-G900F_pit_16GB_SER from http://forum.xda-developers.com/showthread.php?t=2737448
not sure if its the right one?
any info would be great.

Odin fail ....

Someone any idea ?
I am sure about the software , but still i get a fail.
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!