Hi, I'm having quite a problem with my S7 Edge, My phone updated last night and when i woke up it just seemingly goes into a boot loop. Samsung switch doesn't support initialisation anymore, whenever I try with odin to flash back to a earlier firmware i get blocked by FRP. I know my own details to get into the phone so the FRP isnt so much an issue more I cant get the phone to turn on so I can enter these details.
Just curious if anyone can help me with this
Try put your phone in recovery mode and do a factory reset from here
Related
I just got this phone alittle over a month ago. Today at work, my phone randomly shut down and started continuously restarting. The phone will vibrate and boot the logo, then turn into a black screen, vibrate again, and restart. I had not modified my device at all. Just downloaded your typical apps like anyone else. I already tried taking out the battery and letting it sit and booting in recovery mode and wiping the cache and restoring to factory settings. I also tried to use odin to flash what i think is my firmware onto the device. I wasn't able to figure out the firmware of the device before I did it so i sort of guessed based on the model. Though all i did for this is download what i thought was the firmware, put it in odin3.4, entered download mode and plugged my device in and let it download. I didnt do any rooting or enable debugging/disable debugging before i used odin. Did I miss a step? Does anyone have any suggestions of something I else do. I am so confused on how this happened to my phone!
Hi,
My galaxy S4 decided to poop itself yesterday. I was browsing my emails and the phone restarted by itself. . but then it kept restarting over and over again (Boot loop). The phone felt hot, so i took the battery out and left the phone for a while.
Once i put the battery back in, the phone kept boot looping. I managed to get it into safe mode and make sure all my photos were safe – I've just returned from a holiday in Hawaii, so this was very important to me.
After i was able to make sure photos were backed up on the computer, i cleared the cache partition and even did a hard reset. The phone kept boot looping. My phone now gets stuck on the "Samsung Galaxy S4 GT I9505" start up page. I read about issues with the power button, so even atempted to open the phone up and wiggle the power button around a bit by squeezing it with some tweezers. This made no difference. I've even swapped batteries and tried charging it.. this also doesn't work. Currently my phone has the "Samsung Galaxy S4 GT-I9505".
I have been on whirlpool forums and it was suggested that i reinstall the firmware through odin.. i did, but with great difficulty and many attempts. My phone was able to boot up and i was able to send one message and make one phone call before it went into bootloop again or just switches off and doesn't want to be switched back on again. When the phone was on, no sound was apparent when a phone call/text message came through for testing. I've retried dowloading the software on odin, but when i try to switch my phone on it says "firmware upgrade encountered an issue. Please select recovery mode in Kies and try again".
I've also tried putting the phone on the charger and no sound or green battery coloured animation comes up on the screen now.
Please somebody help
It was the latest stock firmware from sammobile.com that was flashed to the phone? Was the phone factory reset from stock recovery before booting the phone after fllashing with Odin?
As far as I know it was the latest unbranded firmware from sammobile.com.
A factory reset was one of the first things I did after starting the phone up in safe mode and trying to recover files.
The phone has never previously been tampered with. I've only ever upgraded the software through WiFi or Samsung kies. Using Odin was a learning experience for me.
Maybe the factory reset needs to be done from the recovery screen rather than from the ROM settings?
The factory reset was originally performed from the recovery screen. I can no longer get into recovery mode though. It only seems the phone wants to get into download mode
Have you tried flashing a ROM designed for a particular carrier in your country?
This is going to sound silly.. But I thought that's what I was doing when I went through Odin and got the firmware from sammobile.com
Which version of Odin and firmware was flashed?
What errors occurred during the flash process according to the Odin log?
Tried flashing with a pit file?
I've purchased 12 of these Tablets for my company. Out of the box they were android 6.0, as soon as we connected them to WiFi the 7.0 Update option came up so we updated all 12. We then loaded our Comodo MDM enrollment on them. Well Next time they rebooted 9 of them would not come up, they just sit at the samsung screen fading in and out. I went into recovery mode to try factory reset & wipe, I get the message that "mdm does not allow factory reset". So I tried resetting the cache which did nothing as well. So I loaded Odin and booted into odin mode tried to load a stock rom and I get the message that the device is in FRP mode and cannot load a custom image...
I have ALWAYS had droids and I favor Samsungs normally.... I have always rooted and unrooted every device I've ever had, but these have me stumped... I cannot get into USB debugging mode, I cannot get the things to boot at all. Every tutorial requires debugging mode. Samsung Business support is NO help at all. So I turn to the dark side... HELP!!!
cpubugs said:
I've purchased 12 of these Tablets for my company. Out of the box they were android 6.0, as soon as we connected them to WiFi the 7.0 Update option came up so we updated all 12. We then loaded our Comodo MDM enrollment on them. Well Next time they rebooted 9 of them would not come up, they just sit at the samsung screen fading in and out. I went into recovery mode to try factory reset & wipe, I get the message that "mdm does not allow factory reset". So I tried resetting the cache which did nothing as well. So I loaded Odin and booted into odin mode tried to load a stock rom and I get the message that the device is in FRP mode and cannot load a custom image...
I have ALWAYS had droids and I favor Samsungs normally.... I have always rooted and unrooted every device I've ever had, but these have me stumped... I cannot get into USB debugging mode, I cannot get the things to boot at all. Every tutorial requires debugging mode. Samsung Business support is NO help at all. So I turn to the dark side... HELP!!!
Click to expand...
Click to collapse
Sounds to me like the problem isn't with Google's FRP lock but with the Comodo MDM enrollment. First thing I'd do is contact their tech support. The FRP lock doesn't prevent you from flashing a ROM with Odin. The FRP lock would just ask for the Google login and password on the first reboot. And I have seen other security apps blame the FRP lock for not allowing a ROM to flash via Odin.
Hello guys this is my first post.
I have a SM-G930V Verizon S7 that previously was in bootloop with OREO, but constantly rebooted at the beginning of the setup I mean when it says hello and so on.
I flashed Nougat without problems and booted normaly but then the FRP was doing his work, I could not boot since I didnt know the email or password.
I then flashed a file that I found to bypass FRP and succeded. I finally got it working very well.
After a while when I tried to clean bloatware suddenly frozen and then never booted again, I wanted to root but couldn´t.
NOW when I flash any ROM from Marshmellow , Nougat and Oreo, it says PASS in ODIN but I cannot enter the recovery.
Vol+, Home and Power gives me a blue line top left saying RECOVERY BOOTING..... then a blue screen saying ERASING... and the reboots again and again. The menu that I can get is the Maintenance Boot Mode (Vol- Power). This menu has 4 items:
1.Normanl Boot, 2.Factory Reset, 3.Safe Mode, 4.Power Down, and the only who works is power down.
I don´t know how much batery is left because I don´t know if in this menu or in download mode the battery charges.
I flashed the last OREO from SAMMOBILE, I also flashed the ROM wich I grabbed when using VZW Software Upgrade Assistant which supposed to be repairing the device but nothing whatsoever.
I don´t have any new ideas my head is full and hot now. PLEASE HELP will be appreciated.
Hi, so about a week ago I updated my S8 and everything was fine. But then while I was making a phone call it shut down. I tried to make it power up but got stuck at the Samsung Galaxy S8 powered by Android screen. No matter what I did I couldn't get passed this screen.
I can't access Recovery Mode. I can access Download Mode tho. I tried flashing stock firmware, it flashed but nothing happened I got the same screen.
I flashed latest firmware downloaded from Frija. I didn't flash the wrong firmware because I tripled checked it with the information gotten from the Download Mode screen.
OEM and FRP locked, so suggesting TWRP is useless (believe me I tried).
Also, I charged the phone fully, nothing happened. I let the phone discharge completely then connected it to the computer, nothing happened. Lastly, I tried flashing combination firmware but it failed every time because my FRP is locked.
Is there anything I could possibly do?