Database Users

Hermes offered £15 or free (spare/repairs) - proceeds to Red Cross

Firstly, I'd like to apologise if this is the wrong place to post. (Got a banging headache...)
I've my old Hermes (SPV M3100), with no screen and some cosmetic damage, especially at front (see picture - silver strip has come off in 2 pieces).
Included is a quite new glossy black hard plastic case which covers the whole handset but it can be used with it on on - like a clear crystal case for normal candybar phones.
Also, a 3.5mm headphone extension/adapter, original earphones, battery, charger, and 2 leather cases (including original).
It's a bit crappy in condition but it does work but there's no screen...
(I had 2 - the screen on the other, which was in perfect condition broke so I took this one).
See the pic.
start at £15 paypal (including postage which is at least £5), for a sponsored walk/run we're doing (proceeds to Red Cross for Burmese and Chinese aid). Is this too high a price? I can promise every penny (after postage) will go to the Red Cross. I'll provide you with proof or whatever if needs be.
I'll stick it on ebay if you want to prove I'm no bullshitter or conman.
Thanks, remember your money's going to a good cause. (Better this than recycling the handset).
PM me for any more info or reply below.
I'll also swap it for a good pair of standard (3.5mm) earphones. (But this'll have to be soon)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I send you a pm...

[email protected]
i have some sony headphones...

no takers yet...

---- Closed ----
Taken

Japanese Privacy Screen Protector

Has anybody used these with a pressure sensitive touch screen device and the Touch Pro in particular?
I've never seen one in the US but they're all over the place in Japan. It like a screen protector but when viewed at an angle over ~30degrees from perpendicular the screen is unreadable or black, sometimes with a image on it.
This page shows how it works, the page is Japanese but there's pictures.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.mmm.co.jp/cf/mobile/cp.html
The difference is they're stiffer and thicker than the usual screen protector so I wonder how well the pressure sensitive screens like the Touch Pro work. Since the pressure sensitivity is adjustable they might still work good anyway.
There's a Touch Pro specific one for sale here for $8 so I'd think that means it works decently.
http://www.mobilefilm.jp/shop/shop....sort=&pic_only=&mode=p_wide&id=404&superkey=1
And the next question is can anybody in Japan order these up for us? Maybe expansys can buy them in bulk and resell them to us?

I am sure this is nice especially in Japan where it would be annoying to have someone constantly trying to look at your screen so they could watch you weird cartoon pr0n.

Nice find... very nice. I'll try to get a few. You can as well go request this in Dealextreme... if the demand is high, they will consider of getting it listed.

Nice one, I will have a look at the shop on the way home tonight and see how they perform.

Pocketsolutions has them, just not for the fuze yet.
http://www.thepocketsolution.com/PSI-55336/iPhone+3G+Privacy+Protection+Film.html
Iphone size could be trimmed to fit.

What does the Tilt Complete Housing include?

http://www.fonlogix.us/att-tilt-complete-housing.html
Looking at that one specifically. My tilt has a bunch of chip/scratch marks on the shell. It is also crooked when the slider isn't open (the face goes down more than it should, not sure why). I want to sell the phone to get a new HTC, so I'm planning on buying the kit and pretty much making it seem as new as possible. Good idea?

peytah said:
http://www.fonlogix.us/att-tilt-complete-housing.html
Looking at that one specifically. My tilt has a bunch of chip/scratch marks on the shell. It is also crooked when the slider isn't open (the face goes down more than it should, not sure why). I want to sell the phone to get a new HTC, so I'm planning on buying the kit and pretty much making it seem as new as possible. Good idea?
Click to expand...
Click to collapse
They do not give enough info from the site to know if this is complete (battery cover, backing, front face, new key board, and new call/end key pad). I bought a screen from them and they customer support SUCKS!! The screen had a red dot and they basically told me to F-off. So I would stay away from that site. I did find a complete housing form e-bay for the same price, got it and now my tilt looks brand new. Look up "AT&T tilit full housing" on eBay. That way you see exactly what you are getting:
Remeber some are just front and back covers, others are the entire setup.
This is just the front and back cover
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a complete setup (same price)

Oneplus 5 Skin

So I wanted a oneplus 5 skin and seeing as the majority are still in pre order stage I thought I'd have a go myself. I have a vinyl cutter so once the material arrives I'll get it cut and post some pics, but here is the current design. (the pikachu is from a phone wallpaper I found online, so it's not mine originally)
I thought because of dash charge, and one of Pikachus moves being "dash" it seemed fitting.
If anyone else has some suggestions for cool skins, let me know and I'll see about knocking it up.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Jonnyn93 said:
Click to expand...
Click to collapse
What vinyl cutter do you have? I want to buy a cutter and make these myself.
Do you already have a template? What format is it?

byt3b0mb said:
What vinyl cutter do you have? I want to buy a cutter and make these myself.
Do you already have a template? What format is it?
Click to expand...
Click to collapse
I made the template myself by using photoshop to draw over the back of the phone. The cutter I use is a Silhouette portrait. It's pretty cool.
their software allows you to trace the shape from a jpeg and convert it to a vector.

Perfect that's the one I was looking at buying.
sent via op5 and xda-app

Have you made the skin, how did it turn out? Do you have the vector file of the template? Would you mind sharing?

Ipulse wallet case review (pics included)

Full Disclosure: I received this review sample at no cost.
Currently I use a Spigen hybrid for my day to day carry case, so this would be a new experience for me. Hopefully a good one as I am prone to misplace my wallet.
It was packaged nicely with a cloth bag.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a good sign.
I'm not sure if the case was designed to sit up for viewing, but I got it to work just fine.
Here it is with my "mission critical take alongs". I fit my license, 2 credit cards and two other cards in the main holders. I'm not a cash guy so I shoved insurance related cards in the bill holder. At this point, that section is a bit "bulgy". Now maybe I've overstuffed it a bit and it might settle in with some use, time will tell.
One thing I did note is the overall construction, it seems very solid. The stitching looks nice and isn't sloppy.
For those that use a wallet case, this is a solid choice. The buttons are cut outs, which is good, as I've had issues with other cases and how the case buttons feel. The styling is nice and I believe it is also offered in brown as well. The magnet does well to close the case. I can't say if this is going to provide good drop protection, hopefully I won't ever find out. The inner case is a pretty standard TPU case. Ipulse is quick to respond at least on facebook, so that is a definite plus. They are looking for consumers to provide additional reviews if you are interested.
Thanks to https://www.ipulsecases.com/ for their review sample and thank you for reading this.

I've added a review of this case to my case reviews thread, here:
https://forum.xda-developers.com/showpost.php?p=76193774&postcount=5
TL;DR: I like this case a LOT.

How does the case hold up?